How to Disassemble the Front Wheel Housing Mechanisms on an Uppababy Vista

[@BarnevognverkstedNo]

As an independent, consumer-oriented reviewer, we are reliant on your contributions to pay the bills and remain operational. If you would like to help support our work, could use a personalized consultation, or think you might enjoy some additional exclusive content in the form of articles (mostly related to the ‘shadier’ side of the stroller industry), as well as access our regularly updated ‘Buyer’s Guide’ (which lists the models we recommend, as well as providing a lot of technical and lifestyle-related information), please visit our Patreon Page: www.patreon.com/thestrollerworkshop Thanks so much for your help!

[@0tispunkm3y3r]

Brilliant. Watched this before getting to work so had the magnet on order from Amazon. Arrived today and I've sorted both mechanisms on the wheel locks in < 20 mins and they're working beautifully. We picked up a 2015 model used which was in excellent condition bar the wheel locks. Cleaned out all the grit and dirt with a small paint brush, silicone sprayed it all up and put it back together. Tights as drum, like new! 👍

[@vks43523]

I cannot thank author enough for this video. I'm from Europe and we don't have any support for this stroller, so DIY is the only way. Was able to replace ball bearnings for the stroller

[@TheSnowMooreShow]

Your initial wheel video brought me to this one and I truely appreciate your time and effort! Just bought this 2015 vista used and the front bearings are shot to hell!! Great vid! Subbed even tho I might mever need more stroller help 😅

[@BarnevognverkstedNo]

Thank you very much, we really appreciate it. That's the main reason we ask people to subscribe in every video, because usually our help is only needed once, but KZbin doesn't understand this particular dynamic of 'how-to' videos, and they make subscription numbers really important for their algorithms etc. :)

[@disobeyd20]

This video was a life saver!

[@jeffsteffens]

Needed that pin out! Thanks so much

[@aaronstuder9025]

you are awesome do you have a good fix for the wobble on this model? thank you!

[@mattmcd2803]

Incredibly helpful video - I know I’m late, but I’m having an issue with the wheel locking mechanism on one wheel. A few days ago the grey button got stuck in the down position and permanently locked the wheel. I opened up the housing mechanism but haven’t figured out what’s wrong with the spring loaded mechanism because it’s still not working.

[@juliehen2011]

Hi- thanks so much for your video. Just wondering what size do I need to order for the spring loaded ball bearing that keeps the axel in place

[@ArielDC]

you saved my life !

[@matts6312]

Thank you very much for these videos. Savings me tons of time and money. I need to replace the radial ball bearings. Do you know what size they are (and where I can find them)? Thanks much! Matt

[@Payback003]

Bearing size on the 2015 model is'6901z'

[@ArielDC]

@@Payback003 i bought 10 for 13$ on amazon

[@luciaorellana4088]

Thank you so much!!!!!!

[@lavracernigoj9298]

have you ever changed the wheels from the Uppababy Vista V2 stroller to the Uppababy Cruz V2. thanks for your help!

[@howiewoiwod2173]

wow! Ya got me at 2:05

[@petebowman22]

Thanks for this. 👏🏻

[@devilmonkey471]

Called out exactly my situation 😆

[@josiecole583]

Hey- thanks so much for your videos! I’ve been trying with no luck to remove the locking pin with a magnet, as advised, with no luck!! Any other suggestions?! Need help!

[@BarnevognverkstedNo]

Try spraying some wd40 around the pin first and let it soak a bit before trying the magnet. This specific part is so stupidly designed, imo :)

[@josiecole583]

The Stroller Workshop no luck!! I’ve tried on two different frames and on both sides and it’s stuck on both! Has that ever happened to you? And yes, a lot of the inner workings of the wheel assembly are infuriatingly designed. It’s like they don’t want us repairing them at all!

[@josiecole583]

Any thoughts??

[@ljt95]

@@josiecole583any luck? I am stuck at the same problem. My magnets that are whiteboard magnets dont seem to work. My pin is in a bit.

[@ljt95]

I will maybe try a stronger magnet.

[@SATinker62]

You caught me fast-forwarding to the spot you mentioned lol

[@Mickybo123]

Did you ever make the video on how to fix wobbly wheels on a 2015 model? I can't seem to find it

[@BarnevognverkstedNo]

No, unfortunately. I would try using wave washers for a DIY fix , like those seen in this video: kzbin.info/www/bejne/ioGUfKaIi9ihiLM Otherwise contact Uppababy, they're one of the few manufacturers with their own 'tune-up' workshops. :)

[@Mickybo123]

@@BarnevognverkstedNo I will try that. thank you for the prompt reply 👍

[@Ramdoo83]

Great help, noticing wobble and cleaned all parts, was thinking some plumber tape around the notch in the wheel , then try the washer.

[@stefanodobesco]

Hi where I can buy this parts?

[@Deep0623]

Thank you so much for this video. While removing one the wheel, the small ball bearings all came out. From what I can see in your video, you have 2x sealed bearings - is it normal that the 2015 model bearings are not sealed? Can I replace them by sealed bearings?

[@BarnevognverkstedNo]

If the balls fell out, it just means the bearings are busted. Yes, use sealed bearings :)

[@Deep0623]

@@BarnevognverkstedNo cool! I am now at the step of removing the magnet but no luck .. I bought a strong magnet from amazon, the magnet looked stuck but I can't get it out.. any clue on how I can get it out to replace the bearings?

[@roby827]

@@Deep0623 what I just did was turn the stroller on its side so the pin is facing down and lightly tapped on the wheel housing with a hammer. The pin will hopeful start working its way out.

[@buser6162]

@@BarnevognverkstedNo Any idea where i can find a sealed bearings? i remove the wheel but the bottom inner bearing came out. The top one is fine

[@jmakins]

Thank you! Couldn't figure it how to get the pin out

[@josiecole583]

Jeremy Makins did this work for you?! It’s not working for me and we’ve tried two different magnets!

[@joeg4014]

Hello, I was wondering if I can disassemble the mechanism while the rusted wheel is still attached? I cannot get them to come off, I followed your other video and it didn’t work, I hit the shaft so hard the front of the frame detached. Any advice?

[@Roman-hu4jq]

Thank’s a lot!

[@zoelyfortin9166]

The magnet dosen’t work for me, is there an other way to take it off? My lock dosen’t work anymore so i am not able to put my wheel. Thank you

[@TheSeventhLion]

I want to replace the ball bearings on my 2015 Vista. What is the size of the ball bearing? Is it something that I could just get at a hardware store or online; or Uppababy specific? Is it the same size bearing on the front and back wheels? Great videos! Thanks for the assistance!

[@BarnevognverkstedNo]

Hi, I don't have an uppababy in right now to check for you unfortunately, but you can most likely order them directly from Uppababy. Otherwise take what's left of the bearings to a skateboard shop and they can probably order you the right size :)

[@TheSeventhLion]

Thanks for the quick reply!

[@andrewrobertson9944]

Do you know how to take the pin out the 2015 model by any chance? Cheers

[@Ramdoo83]

Does anyone know where to get replacement parts for both the locking mechanism and that white plastic thing? The wheel keeps wobbling and sometimes falls out and it definitely looks worn. Can't find that part anywhere online. Maybe it's a 3D print job or something?

[@chrish4624]

Hello, can you point me in the right direction with ordering a new lock mechanism for the front wheel of a Vista? I have not received a response from Uppababy yet. Great video...

[@BarnevognverkstedNo]

Most stroller parts are tricky if you can't get them from the manufacturer. Your choices are really either a 3d printing service or purchasing a used chassis on ebay / craig's list etc.

[@meylin5]

What happens if you just take the lock mechanism off….

[@Zuhaira0121]

The pin won’t come out with a magnetic, but thank you lol