Build Video, RC excavator Volvo EC160E Double E - APK Hydraulic conversion, with Wuehlbox options.

[@BartsteRCModels]

I put the Open TX program in the video description. The program is made for Magom pump and Servonaut ESC

[@ralphwilhelm868]

Auch wenn es keine Anleitung ist, es für dich durch Erfahrung einfach ist, macht es doch Hoffnung daß es als Winterprojekt umsetzbar sein kann. Dankeschön für das Video. Danke an Wühlbox für die Erstellung der Zurüstteile. Gruß Ralph

[@RS125JOE]

Really nice work 👍🏻 I've just bought the hydraulic conversation kit for my electric Volvo I already have the blade and slew ring upgrade and a few other bits once it's done it will be nearly identical to the one you've converted in this video

[@DanielGonzalez-mj3he]

I just purchased the blade today 😊

[@bdalrzaqa]

رائع جداً حفاره فولفو

[@dutchconstructionrc7429]

this is really another example that you really deserve your youtube aword. your work is great. keep it up. you are a great inspiration to many people. 🤩🤩

[@vidasandor5409]

Szuper! Igazán nagyon szép!

[@SC.243k]

Awesome… very beautiful 👌 Fully watched 👍👍👍

[@francky_4524]

nice job !

[@PhuongDuc-sx5si]

thankyou 💞👏💪🥰🥰

[@optimus8910]

Super vidéo merci

[@RCJCB_and_Forestry]

Cool!

[@la.pyykko]

Amazing video once again.

[@WebFreedomLifeStyle]

Electric screwdriver 👍👍... 🙄 but great video, the RC world had gone big! Amazing Machines.

[@FlorianKunz-rp6ld]

Kul 😊😁

[@ketjow8995]

I am speechless. You have done an amazing work again. keep it up!

[@reggiereg92]

That's amazing 👏, if you don't mind me asking would you sell these?

[@lucadebernardo7540]

👏👏👏👏

[@clauswerle]

Great

[@RUS-ol8xv]

Ну вот.. снова какое-то волшебство... Очень круто Стив!

[@CLAUDIOSRC9529]

I liked and subscribed

[@Pantano0]

Como siempre, un trabajo impecable. 👏👏👏👍

[@jonnirc6843]

Great barste.

[@miniaturasmikeias3577]

muito top mano

[@youngladygaming828]

Ok

[@simonw6922]

Mega Umbau ;) eine Frage hätte ich , woher sind die Abdeckungen für die ehemaligen Kabelöffnungen im Baggerarm?

[@BartsteRCModels]

C'est dans le kit APK.

[@simonw6922]

@@BartsteRCModels das war in meinem Kit leider nicht mit drin 🧐

[@BartsteRCModels]

@@simonw6922 Il faut contacter le vendeur du kit ? Moi il me manquait de la visserie, et 2 raccords.

[@daveb5520]

Hi there.. awesome model. I like the addition of the blade. How many millimeters stroke would the actuators for the blade be?

[@BartsteRCModels]

All parts are listed in video description.

[@kurwinramsran8509]

Thank you for responding if you look on your official manual link. Thats what im doing, at the end i see them connecting the 40 ESC but it doesn't really show what they're connected to. Did the cut off the factory battery plug and put the deans connector on the new ESC? Or did they wire the +and- wires to the factory electronics I hope im explaining this right..

[@BartsteRCModels]

I don't know how it's made... Is there a BEC from factory ? Maybe tracks and swing motors ESC need power too ? I changed everything on mine, maybe you have to ask APK or wuhlbox of how it have to be done ?

[@ALRIGHTdieBand]

Hey. I removed the power cable from the original circuit board and now it gets power from the new ESC 30A controller. But the chain drive and uppercarriage rotation can no longer be controlled on the original remote control. Did you find a solution for this?

[@SonerBaysal]

Is it anyhow possible to make electronics detailed video for this? Hardware is well seen but you kind of skipped the electronic part a little with servo connections and such. I want to copy exactly your setup with radio and sbus connectors and such. That would be perfect to see or is there any pictures somewhere? Thanks!

[@BartsteRCModels]

Sorry I didn't made it, the video is about APK kit build and Wuhlbox option, usually you can use the standard radio, I made my own setup like my other excavator, but it's not detailled here.

[@SonerBaysal]

@@BartsteRCModels I see. I liked the video a lot actually. I am also planing to build the same excavator with wuhlbox hydraulic upgrade kit. Thats why i was interested. Thanks for the reply and hard work you put to record the process and sharing. Does those grey 3D parts comes with Wuhlbox hydraulic set? The ones closes the gaps after taking the electric motors way from the boom arm?

[@BartsteRCModels]

@@SonerBaysal yes the 3d parts comes with the APK Kit

[@maga_bagger]

I bought a blade from wuehlbox but I don't know how to connect the wires. Can you explain it briefly?

[@BartsteRCModels]

I depends the esc you have, I use my own esc, not the esc from wuehl, ask the seller for support.

[@maga_bagger]

@@BartsteRCModels thank you so much 😀

[@Metagross555]

Are you an engineer? What is your experience background as you seem to be knowledgeable in many fields

[@BartsteRCModels]

thanks, I am an automation technician

[@camsullivan5207]

Did you implement the quick coupler without upgrading to a 4v system? If so its electronic quick coupler?

[@BartsteRCModels]

No it's manual coupler

[@luddvikk1]

HI. Where did you get the plastic cover for the stick and boom?

[@BartsteRCModels]

Ot comes with the kit

[@luddvikk1]

From APK?

[@BartsteRCModels]

@@luddvikk1 yes

[@-1-2-1-]

Is a diy conversion better than the hydraulic version from double e?

[@BartsteRCModels]

Yes it's better than the double-E hydraulic version

[@999gufi]

I really like your excavator. I have a question and a request. Where did they make the chain movement on the remote control. I'm thinking about buying such a remote control too, would it be possible to get your settings from the remote control. thanks

[@BartsteRCModels]

I modified my TX16 with back joystick like this : kzbin.info/www/bejne/apu1kGaQgbape5I

[@gregor001]

Hello, I also converted it and operate it with the original white remote control and original circuit board. The hydraulic functions and lights can be controlled, but the upper carriage and chain drive can no longer be rotated. Please advise, thank you.

[@BartsteRCModels]

Hello, I don't know, I use RadioMaster transmiter. Ask the seller for support with original transmiter

[@gregor001]

@@BartsteRCModels OK thanks

[@MYRCHOBBY]

Hello might be a stupid question but where do I hook up the ESC from the hydraulic pump and motor to? I’m using the factory electronics and transmitter. Does it go to the battery or connect to the channel box somewhere? If it does go to a battery. What do I do with the factory battery wire? Thanks

[@BartsteRCModels]

Yes the esc must be wired to battery, there is not instruction with your installation ?

[@MYRCHOBBY]

Hello. The kit came, everything is going well but the hoses. There are not fitting. I tried heat , oil, grease. any advice? Thanks

[@BartsteRCModels]

@@MYRCHOBBY Yes I had the same problem, hose are too strong, I put some oil before pushing it, but it's very hard.

[@MYRCHOBBY]

Hello, I purchased the song module you have in the description. How do you program it. I only get a truck sound? Thanks

[@BartsteRCModels]

@@MYRCHOBBY You can buy a programmation cable and other sound where you buy the sound module

[@-DawnZero]

Do you happen to have a link to the STL for the 3D printed covers you made?

[@BartsteRCModels]

I get the cover with the APK kit, I didn't printed it

[@wiktorator3213]

Will you give me a link to these connectors to which you attach the cables from the hammer to the excavator?

[@BartsteRCModels]

It's standard pin servo connector

[@user-pm5kh3ul6u]

Did you make the cylinder or did you buy it?

[@BartsteRCModels]

Cylinders are include in kit, all parts are in video description

[@user-pm5kh3ul6u]

@@BartsteRCModels Do you know where to buy kits?

[@lontongbalap7127]

how much money is needed to make it?

[@user-ft7mp4no8t]

How many minutes can I operate after the battery is fully charged?

[@BartsteRCModels]

2h aprox

[@simonelucarelli9633]

Salve, volevo chiedere se è possibile installare questo kit idraulico apk su un volvo originale idraulico, lasciando solo i pistoni originali.grazie

[@BartsteRCModels]

Je ne sais pas si les diamètres des tubes correspondent, si elle est déjà hydraulique pourquoi changer ?

[@markuskania4380]

Where does the Feetech Micro ESC go? I can't see that on the video.

[@BartsteRCModels]

It's for auxiliary control, they are small, you can put everywhere

[@markuskania4380]

@@BartsteRCModels for the excavator shovel to tilt ?

[@rockman49er]

Can I convert the huina 1550 to hydraulic system 😫

[@Sampick94]

Allo Steve, J’aimerais avoir ton avis par rapport à ce kit. J’ai présentement une Bruder Cat 320 next gen convertie en hydraulique avec le kit magom, le bras en métal et la base en acier. Je l’aime bien, mais la volvo m’attire par sa puissance. Recommanderais-tu l’achat de ce kit vs ma pelle Magom? Merci!

[@BartsteRCModels]

Salut, pour être franc, j'ai eu pas mal de soucis avec le kit APK, j'ai remplacé la pompe et le distri par du magom, donc perso je garderai la CAT 320, si tu veux plus de force met plus de pression ou prends une pompe Jung.

[@Sampick94]

Merci de ton retour. Si j’installe une pompe Jung, ce ne sera pas trop de pression pour les vérins Magom? À quelle pression recommandes tu de l’opérer? Merci beaucoup!

[@BartsteRCModels]

@@Sampick94 Dans tout les cas il faut un limiteur de pression, donc peu importe la pompe, on peu réduire la pression, j'ai 20bars c'est bien assez.

[@markusburger344]

Wie hast du das Soundsystem angeschlossen?

[@BartsteRCModels]

Das miko from aliexpress

[@user-ft7mp4no8t]

LESU warning light?

[@sheldonxx30]

Hey, wie kann ich die beiden Ketten Antriebe so machen das sie feinfühlig fahren ? Kann ich da eine esc von WB dazwischen schalten? Hab auch die Electric Version vom Volvo EC160E. Mit freundlichen Grüßen.

[@BartsteRCModels]

Tout les lien des pièces sont dans la description de la vidéo. J'utilise des variateurs servonaut MF8

[@sheldonxx30]

@@BartsteRCModels many thanks for your fast support.

[@bdalrzaqa]

قمتوا بعمل ازاحه الحفاره

[@michaelkuchler7195]

Also wo gibt es den Bausatz ?

[@stevenjacobs270]

this is sick nice work can you do it for my😀😀😀😀i paid for sure

[@BartsteRCModels]

No sorry, I didn't build for sale

[@michaelkuchler7195]

Hallo wo hast du das Raumschild her

[@BartsteRCModels]

All parts are listed in video description

[@beomyhan5601]

I'm curious about the electronics behind the driver's box, is it necessary to move smoothly?

[@BartsteRCModels]

All parts are listed in the video description

[@NineTravelers]

How to buy this

[@BartsteRCModels]

All link in video description

[@robertorico5787]

Tu me la pasarías a hidráulica la mía? O no te dedicas a eso?

[@BartsteRCModels]

Non désolé je ne propose pas mes services

[@mainanahui5852]

Berapa harganya excavatornya bang

[@BartsteRCModels]

All link in video description

[@cindydegrange-brayette6815]

KIT APK Hydraulic conversion tres bien seulement le hic pas de pieces de rechanges le bout des tiges de verins sont en laiton et donc fragile

[@BartsteRCModels]

Je dois dire que je suis déçu au final, la pompe à laché au bout de 3min, j'ai des fuites sur le distri et les passages dans le distri sont trop petits. Servo de distri trop bruyant et trop lent aussi. Ca reste pas cher, on en a pour son argent.

[@cindydegrange-brayette6815]

@@BartsteRCModels a mon avis il faudra modifier et ameliorer cela avec du magom hrc

[@BartsteRCModels]

@@cindydegrange-brayette6815 j'ai deja la pompe de magom et si le distri me prends trop la tete il sera remplacé aussu

[@cindydegrange-brayette6815]

@@BartsteRCModels moi j'ai opter pour le distrib et moteur pompe et servo ESC matos de chez magom HRC seule les verins APK que j'ai conserver sur le bras de la pelle

[@hamidoaga3376]

Hey dostum bunu bana satmak ister misin😁😳

[@cindydegrange-brayette6815]

UN FORUM ou l'admin est un gros C... on se fait insulter sexisme et homophobe kzbin.infoYnTpd9zAr0o

[@BartsteRCModels]

Je pense que tu parle de JPG lol. Ca fini toujours comme ca avec lui... Ta vidéo est privé je ne peu pas la voir.