BASEBALL CAP TREAT BOX TUTORIAL | Easy | Step By Step | DIY | HAT Treat box | Gift Box | 2022

[@teresarivera3288]

I have seen so many videos on this cap there all good but I can say I understand your very well step by step

[@DIYbyCes]

Thank you so much! 🥰

[@guadalupegomez3491]

I second that 👌thank you

[@DIYbyCes]

Thank you!! ❤️

[@jackychavez5475]

first time making the hat and let me say I love this tutorial !!! I'm so happy to have came across this video (: it was so easy and I was able to follow the steps . Thank you!

[@DIYbyCes]

Thank you so much! 😊

[@susannavarro18]

Best tutorial out there.thanks

[@DIYbyCes]

Wow, thank you! ❤️❤️

[@fresaaguilaraa]

How did u make the sticker

[@scrapoutlet8662]

I don't have a Cricut or similar How can I make the cap?

[@liliana8423]

What measurements are you using?

[@roseanngibson4084]

Easy to follow...thank you!

[@DIYbyCes]

You're welcome! Glad it was helpful! 🤍

[@carlisarmstrong9499]

I love your tutorial, and I really appreciate that you showed how you did the cap tag

[@DIYbyCes]

Thank you so much!

[@carlisarmstrong9499]

No, thank you

[@teresarivera3288]

Hello I love your video I got my SVG for cap I love your step by step but I see the 11.5 by 11.5 what size for the others pieces im so lost

[@DIYbyCes]

Hi, thank you!! When you’re sizing them, please make sure they are all grouped together. The 11.5 x 11.5” is the size of the mat. We just want to make sure that we are not going bigger than the size of the mat. I hope it helps

[@teresarivera3288]

Got it what sitting do I use for the pieces I see 8 mats can you let me know mat #1 settings and mat 2 and so on so I can write it down and follow your steps by steps I hop I’m not asking for to much I’m getting to know my cricut

[@DIYbyCes]

Just ask away! I will try my best to help. 😊 For all the mat, the setting is Medium Cardstock 80lb because that’s what I used in this video. But if you’re using a heavier or a thicker one, use Heavy Cardstock. It should say on the cardstock packaging. 😊

[@DIYbyCes]

Please let me know how it goes. 😊

[@teresarivera3288]

Ok I seen videos again I think where I get confused is i no size of mat once I group them will the H and W automatically go to its correct size. just by it self I tried to screenshot all the pieces to the the Height and width of each piece so I can Wright them Dow

[@jacintacannonier4247]

i have this template for years and have not used it. when you saidthe broken lines need to attach to the image, you are just touching them to highlight them?

[@veronicagarcia1397]

What if I don’t have that machine ? What are the sizes ?

[@DIYbyCes]

I’m not too sure but I think you can cut it manually with scissors. And sorry I do not have their individual sizes. I’m not sure if I answered your question.

[@louisemcclain6189]

Thanks for sharing this great informative video tutorial

[@DIYbyCes]

Thank you so much! 🙏🏼

[@kyaragarcia47]

@DIYbyCes what printer do you use for logos?

[@trishat2765]

Great tutorial Ty Ty Ty.. Beautifully done..

[@DIYbyCes]

Thank you so much!

[@brandyjones254]

Can you tell me what measurements the pieces for the top of the hat end up being. I know the bottoms piece you are making to fit mat 12x12 but on the new Etsy template you have in description they are 2 different sizes and I need them to be all the same so when I group and upsize they will all match. Please help.

[@DIYbyCes]

Here are the measurements for the pieces for the top of the hat (pre-cut) - 5.162” x 6.941”

[@AsiaFields-zy3xv]

where did you find the sticker logo and the hat size stickers

[@DIYbyCes]

Hi, I made a tutorial on it. The link is in the description box of this video. 😊

[@mjidkidspeeps8908]

Great tutorial very well explained.

[@DIYbyCes]

Thank you so much!

[@carlaorozco1639]

I'm so confused I can't attach the cuts to the cap 🥺😭🤷🏻‍♀️🫣

[@RandomSBVideos]

Your link for the cap doesn’t work anymore. I bought a different cap svg file but the cut lines on the brim doesn’t work well, I had to default to score. I’d really like to try a file that cuts the brim well. Can you share the name of the seller?

[@DIYbyCes]

Hi, thank you so much for giving me the heads up that the link is no longer available. I just found a similar one and updated it in the description box. 😊

[@RandomSBVideos]

@@DIYbyCes ​ the tabs for the new link are different than yours, yours just seems perfect to me. Not sure if you’d be willing to share your file (I can share mine first so you know I really did already buy it). I also figured out how to group them on 7 letter sheets instead of 8 12x12 which saves some money. I’d be glad to share that too

[@DIYbyCes]

Send me an email at [e-mail]

[@lillybear1214]

Hi there! I’m having trouble with my little piece shown in 4:32 printing out. Only one side has the pointy part & the other nothing. How can I please fix this thank you for this video! I look forward in getting some good news how to resolve this! 😩🙏🏼

[@DIYbyCes]

Hi, do we have the same SVG file? Also, what machine are you using?

[@lillybear1214]

DIY by Ces Thank you for replying! yes ma’am! Explore air 2

[@iplantobegreat7055]

Can you use 8 x by 11 paper or do you have to use 12 x 12

[@DIYbyCes]

Hi, yes you definitely can. Just change the template size to 8 x 10.5 inches. In this video, the template size was 11.5x11.5 inches.

[@tonybenz7880]

How did u get it to not cut out the ridges on the side pieces. I attached the lines like u did and it cuts out the entire line with ridges. I can't get the ridges to stay on

[@DIYbyCes]

Hi, I’m just wondering if we have the same SVG file? Because when I tried to do the free templates that I’ve been seeing online, it wouldn’t work because of the ridges that need to be attached on the paper.

[@tonybenz7880]

@@DIYbyCes yes its from itsy, I figured it out. When attaching the lines to the pieces they need to be changed to score. On the tutorial they were left as basic cuts. Changed it n saved it. Works good now. Thanks

[@DIYbyCes]

Glad it worked out for you! Thanks for sharing!

[@betotorres1321]

@@tonybenz7880 Hi Tony, I had the same question as mine was cutting the ridges as well, thank you for this. My problem is I am trying to select score and its telling me that there are no attributes for score operation. I am using the cricut maker. Any tips?

[@tonybenz7880]

@@betotorres1321 you need to click on a piece that has the lines and unattach the line and then u would select just the lines and chamge them from a cut to score.

[@carlisarmstrong9499]

Thank thank you

[@rachellevy1582]

How do you figure out the size of all the pieces, and for some reason I can't ungroup it. Please advise

[@DIYbyCes]

Hi, please email me at [e-mail], I will email you the exact measurements of each piece.

[@shaketaallen6541]

@@DIYbyCes can you please send me the measurements for the piece mine are not adding up. Thank you

[@tommeakabrown1335]

I can never get my pieces to add up. 😒

[@DIYbyCes]

Hi, when you’re adjusting the size of the pieces, were the pieces grouped together?

[@guadalupegomez3491]

Hi I have the same question what size do I use for the hat? Thank you

[@latasha419]

I'm new to this....how did you get the score marks

[@DIYbyCes]

Hi, the SVG file that I bought has the score marks already.

[@mizztorie]

Do you need a scoring tool to attached to circuit

[@DIYbyCes]

Hi, with this SVG, no you do not need any scoring tool.

[@vozuna1]

Ok my crown part of the hat came out a bit crooked and not as nice as yours. Maybe it just takes practice?

[@DIYbyCes]

Hi, yes it takes practice. Assembling the crown part is a difficult one, but it gets easier with practice 😊

[@nakiag3]

I don’t understand. All my scoring is turn into a basic cut . This is the 4 video to explain the scoring this way . I much really need a video for dummies

[@stacycunningham7998]

Are these the same instructions for Silhouette? Please help

[@DIYbyCes]

Hi, I don’t own a Silhouette so I can’t certainly answer your question but I believe they are the same.

[@stacycunningham7998]

@@DIYbyCes Thanks

[@rickirivera8380]

Do you think we can print it out and just cut it out I have the small Cricut so this won’t work 😢

[@DIYbyCes]

Hi, yes. You can do that. Just print then manually cut it. Do you have the Joy?

[@rickirivera8380]

@@DIYbyCes yes!

[@janine4603]

hi can you please post measurements?

[@DIYbyCes]

Hi, the base itself is approx 8.5x 11”. The box (where you can put the candies) is 8.5x7”

[@janine4603]

What about the top pieces of the hat? Each one is the same size? I can just put the size on each cut and put together thank you so much for your help

[@DIYbyCes]

Oh, you were asking about the size before it was made. Sorry I gave you the final size. You can use a template to size it according to the size of your cardstock. Since I used a 12x12” cardsctocl, I made a 11.5x11.5” template. You can forward to 1:12 for the measurement. Hope this helps

[@princessasencio21]

Why type of Blade did you use ?

[@DIYbyCes]

Fine point blade or standard blade that comes with the machine

[@adriannedriidennis7390]

It doesn’t allow me to I group the pieces and the score lines to re size. I got my template from Etsy looks just like yours

[@DIYbyCes]

Hi, sorry did you mean it’s not allowing you to group the pieces?

[@nicoleboyd2861]

I’m was wondering if you used a Cricut maker or Cricut explore?

[@DIYbyCes]

Hi, I used Cricut Explore Air 2 but the steps should be the same. 😊

[@lorettacurry5684]

How did u cut items on sticker paper

[@DIYbyCes]

I just downloaded the logo and uploaded to Design Space, and then Print And Cut. 😊

[@DIYbyCes]

Hi, I just uploaded a tutorial on how to make a sticker logo. kzbin.info/www/bejne/qmLRZXmojb2GrM0

[@verol4705]

I have the same file and a air 2 but when I resize it ,how you show is it says my machine can’t cut that what can I do I’ve tried 3 different files it says the same

[@DIYbyCes]

Hi! How big did you resize the base of the cap?

[@DIYbyCes]

Hi, did you get it figured out?

[@teresarivera3288]

I have a cricut maker when I go to make it i keep getting a message that says project incompatible with machine. This machine is not Supported with your current machine Selection To resolve press OK and adjust Effective layers Pls tell me what I’m doing wrong ??? Thank you again

[@DIYbyCes]

Hi, can I ask what size are you making the base of the cap to?

[@teresarivera3288]

@@DIYbyCes I get the square and I size it to 11.5 w & h and I fit the long pattern to fit

[@DIYbyCes]

When you’re sizing them, are all the pieces grouped together? Like when you sized the base to 11.5 x 11.5, all the pieces’ size changed too?

[@SR-jm4pu]

It's so funny that I bought the same template before I found your channel.😂

[@DIYbyCes]

😂😂 Have you done it yet?

[@successwithkatira]

What type of paper did you use to do this?

[@DIYbyCes]

Hi, I used a 12x12” cardstock but you can use any size of 60lb or thicker cardstock 😊

[@lorettacurry5684]

What size is card stock

[@DIYbyCes]

Hi, I used 12x12” cardstock in this video to get a full sized cap that I wanted. But you can also make a cap using 8.5x11” cardstock. Just make sure when you’re resizing them, they are all grouped together because you don’t want a smaller size and a bigger size piece. Hope it helps!

[@jazminvaltierra1293]

Disculpa cuáles son las paltillas para aserlo

[@DIYbyCes]

Hi, I got the SVG file from www.etsy.com/JaylsCreations/listing/1148581868/hat-box-svg?Copy&ListingManager&Share&.lmsm&share_time=1642532022047 Hope that helps!

[@mayrajvaldez3731]

How much will you charge for something?

[@tamikaleggett7530]

I downloaded your file for the hat, but it only pulls up as a website not a picture file. Can you help with this

[@DIYbyCes]

When you downloaded the file from Etsy, where did you save it? Maybe try to go back to Etsy or your email and try to download the file again and put it in your Desktop folder. The file should say “baseballcap.svg”

[@naomiramirez6734]

Thank you so much this was very helpful ☺

[@DIYbyCes]

Thank you so much for watching!! I’m so happy I could help! 😊

[@jahkisharichards1431]

Hi. I’m stuck and have questions ☺️😇

[@DIYbyCes]

Hi, I’ll try to help. Can I ask what do you need help with?

[@lyndasanchez6888]

I’m lost . U lost me , what are u doing individually? When u click on the right side ?

[@DIYbyCes]

Hi, I am attaching the lines to the pieces otherwise the machine will cut them separately and not on the pieces. I hope that makes sense.

[@teresarivera3288]

Hello

[@lisapeasley1829]

it was hard to watch you glue tabs outside on the hat box like my brain was screaming omg it was a great tutorial otherwise

[@DIYbyCes]

I actually realized that after uploading it. It will be covered by the top part of the hat anyways. Thank you for pointing that out.