Basement DJ Story 3 - DJ Light Show

[@slaction]

This is actually one of the best home/DJ shows I've seen in a while. Good placement and great timing!

[@djgeojoe]

Very nice, back in the day I started out as a light engineer, (I controlled/maintained the lights in the club). A lot of people don't realize that the DJ just plays music and its usually another person working the lights and programming the DMX controller. Now we have DMX operators, computers and DJ-Co pilots etc. Good on ya mate!

[@dragonflyturner8918]

Man whoever gave this vid a thumbs down didn't watch it all. Killer job

[@9965paul]

at @ 3:29 these lights go all out! So beautiful I almost cried like a baby!

[@starfish469]

Classic example of thinking the whole thing through to the end. For the equipment you used it really couldn’t be better. Thanks and congrats

[@airheaded]

Wow.. Nicely done my friend! Awesome light show.

[@Ritzsmokes]

Great way to show that you can put on an awesome show with pretty much all incandescent lights. Great video

[@bsntechdotcom]

@notreallyfamous The Chauvet Intimidators were controlled simply with an on/off blackout controller. The other lights were all connected to an 8-channel relay pack - that is then connected to the 8-channel controller with on/off switches and momentary on/off buttons.

[@feelsgoodnow]

very well done. I love that you did it without any programing.

[@bsntechdotcom]

@DasBohSchitt The lights are all "daisy-chained" together using DMX cables. The master light then is connected to a simple blackout controller.

[@deke28]

Nice show man. I can tell that took a while to program. Nice work !

[@bsntechdotcom]

just a blackout controller is used for the intelligent lights - and all the others are hooked to an eight-channel American DJ 8FC controller.

[@ILovePussay]

The rotosphere is wicked.. great job..

[@bsntechdotcom]

@dadspayments Pretty happy with the setup - but I do have room for one more light. Don't know what happened, but the American DJ Orbit light won't work now (just got it too). Changed out the fuse and that didn't fix it. Ensured power is running through the fuse by testing the wires - so that means it is probably the transformer. Anyways, the music is Kaci Battaglia - Body Shots and the mix is the Dave Aude Club Mix.

[@surgetron1337]

Wow haha, that is freaking awesome tho. Nice hand work there, pretty precise. I have 2 Revo Raves and the vertigo. Really want some of those gobo lights like yours. I do the same also except i use ADJ UC3 Controller to control my lights Wireless. Awesome set up tho!

[@bsntechdotcom]

@LCPanthers3 All done by hand. I have an eight-channel light controller (SFC-8C) system. It was a matter of keeping up with the music and pushing the buttons for the lights at the right time. You can see in some areas where I messed up a bit.

[@imcubix]

This is amazing... can you make a tutorial on how to do this please? I've always wanted to save up money to buy these kind of light setups and program similar routines to them.

[@Argiedan]

AT LAST! a well recorded lighting show. I search for popular discotheque's intro but all I get are bad recordings. I wonder what are the key words to find 'officialy made' videos about Disco's intro and show. Thanks everybody in advance

[@mcharrison23]

yes very nice video ,thanks ! it would be if you show w/ camera your effects layout and how you bolt everything together .

[@bsntechdotcom]

@flashygap Somewhere between $800 - $1000. Of course, I bought all of the fixtures used.

[@guillaumeberton6218]

Love it! Done very well and good use of many features :D

[@jordanwaeles]

I've seen countless kits that are much more expensive, and that plainly sucked because nothing went along the music. You've got good skills, very well done!

[@bsntechdotcom]

@byrondess For the four Chauvet Intimidator lights, I have a simple controller that has two buttons on it. The controller is a small black square box with two green buttons on it. The top green button controls blackout. The second green button controls fast or slow scan mode. For all of the other lights, they are hooked to an eight-channel relay controller - like the SC-8 system.

[@bsntechdotcom]

@Alexstar1250 I just purchased them through a combination of different places. The only light I paid retail for was the Chauvet LX5.

[@bsntechdotcom]

@deke28 Actually - I didn't do any kind of programming at all. I just sat at the 'control board' which has eight switches to turn lights on and off - and worked them with the music.

[@cip366]

nice job bro...i like your lights..i wish you would show us how you put them together ..

[@bsntechdotcom]

@facu221186 Not using any kind of DMX control board at all. I simply have a controller that has on/off switches for each light - and that is what was used.a

[@bsntechdotcom]

@tjfan48 Yes, they are in sound-active mode. No DMX controller used.

[@freeqwerqwer]

Damn!!! This is the basement DJ show to end all other basement DJ shows !! ROFLMAO !!!!!!!!!!!!!!!!!!!!!

[@michaeldiruocco]

I have a question and i would appreciate it if anyone could answer me... I just bought 2 intimidator spot 350s and i have an obey 40. I am thinking in the future on how im gonna go about programming them. Would it be better to put them both on the same address and make them do the exact same thing in the scenes or put like one on 1 and the other on channel 17 and make it do something else compared to the first one. Note that these are gonna be used for mobile parties and not in clubs.

[@bsntechdotcom]

@cookie35n The lights are pretty good for a mobile DJ in my opinion. While they do have the colors and gobos on one wheel (meaning the gobos are set colors that cannot be changed), they still work well and can be hooked to a DMX controller to be programmed, can run in stand alone mode, or can be linked up with a blackout controller so they will all run in master/slave mode.

[@harnasmen]

amazing show :)

[@rallycorsa1600]

Nicely done!

[@Desamelight]

So beautiful!

[@bsntechdotcom]

@kevin26tx No DMX was used. All done manually.

[@bsntechdotcom]

@zxtuner84 Correct. I used the dip switch to invert the pan on the scanners. No DMX programming involved at all on this video.

[@huitzi44]

best light show ever!! how much u spend on the lights? thanks!

[@bsntechdotcom]

I'm not sure what the going rate is myself. But it definitely required a lot of practice just for one song - let alone a whole hour of songs.

[@MEGABOINK65]

OMG!! freaking love it!!! come over and do this in my basement, i have the dough, but how much? LMAO

[@Ducati559]

CAN SOMEONE PLEASE TELL ME WHICH ONES ARE THE ONES THAT FLASH On N OFF?

[@Iamjake1000]

Are you still selling this?

[@diskolichter]

Awesome job ! really good lightshow ! But I wouldn´t use the laser. Anyway , coooool stuff !

[@johnelig7723]

very cool ! i have a dmx controller/programmer and can't make it look this good! i'd like to program some songs and sync em to music for parties, but i think i need computer software for that? wish there was an easier way.

[@skaterman160]

which lights are on "soundactive mode"

[@diegomartinez3194]

is this DMX, or is it just all sound motioned? this is an awesome dj light setup :D thumbs up

[@America567]

Wow that is so awesome

[@bsntechdotcom]

They are not programmed - but I did sit in front of a light switch to turn the lights on and off manually. I did the song probably three times before doing the video - so it took some time. Definitely wasn't impromptu.

[@MEGABOINK65]

This song is hot!! now trying the same with Patrick Cowley Megatron man!

[@mfs10131]

the remix to this song is by Dave Aude

[@Spectre361]

DID YOU HAVE TO INVET THE PAN ON THE SCANNERS OR DO THEY CROSS LIKE THAT DUE TO DMX PROGRAMING ONLY?

[@facu221186]

What do you mean when you say DMX or manually? Sorry I'm kind of new in all this.

[@KokkolanVesiurut]

smoke/fog machine?

[@bsntechdotcom]

Not sure what you mean by selling the video with an alpha channel on it? I have the original video still on my computer (I think).

[@djscottdog1]

very nice

[@bsntechdotcom]

yes, used just a cheap fog machine that I got at a store in the mall.

[@Lumosity83]

this is SO COOL!!!

[@RyanDisanti]

AWESOME!!!!!!!

[@rjdowning]

This is sick, man. What's the market rate for an hour of this high level of light mixing applied to an hour long list of songs? Four hours? Per song?

[@lightandsoundmaster1]

very cool

[@flashygap]

total cost?

[@ITSME-mt2zl]

track ID ?

[@Sergio_FFF]

Are you using the DMX ? Or what ?

[@corvetteman7897]

thats badass

[@alexrsagen]

Just download it with any youtube downloader and display it in eg, after effects with blending property color dodge or screen.

[@harnasmen]

amazing :) and good muzika ;)

[@SuperTjorben]

VERY NICEEEE

[@jasonparker4965]

it jsut shows you its all about how to control the lights and not about which fixtures you use...

[@2beJT]

+Jason Parker theyre sound active

[@ClanSTuNx]

what's total price? *-*

[@bsntechdotcom]

No, the lights have been sold.

[@LukeDrummer100]

What are you using to turn the lights on and off?

[@bsntechdotcom]

+Beyond Rescue All of the lights are connected to a power controller. It has an eight-panel switching board that has on/off or push buttons to turn the lights on or off. There is then a serial cable that runs to an actual power pack that is mounted by the lights with eight outlets to plug the lights in. The switching panel then sends the on/off signals to the power pack using the serial cable. For the Chauvet Intimidator lights, there is just a simple on/off push button controller.

[@LukeDrummer100]

+bsntechdotcom you should do a video showing all of your equipment one by one.

[@bsntechdotcom]

+Beyond Rescue Not possible unfortunately. I sold all of the stuff a few years ago. I used to have a mobile DJ business many years ago and sorta had a flashback year where I bought a bunch of lights for the basement. Then they sat.. and never got used. So they were sold.

[@Sergio_FFF]

@bsntechdotcom wow that's Good,.. Thanks!

[@RyanDisanti]

Nice.

[@LukeDrummer100]

Is everything sound active on this or is it dmx?

[@bsntechdotcom]

+Beyond Rescue Everything is sound active. The Chauvet Intimidator lights use pre-programmed scenes and they are 'daisy-chained' together like DMX lights, but no DMX board is used.

[@mrplumberglasgow]

ye need to get a proper lazer in there and u wud be jumping! prity great as it is tho!

[@Lumosity83]

i want to do this with my training. p.s. this is coooooooool !!!!!!!!!!!

[@lms1234566]

WOW!

[@bsntechdotcom]

@Alexstar1250 I want to say that I'm up to about $1,000 for everything.

[@LCPanthers3]

How did you sync all this shit!?

[@925barz]

be my bff