Basic DJ setups using the Traktor X1 MK3 | Native Instruments

[@NativeInstruments]

Check out part 2 where Matt shares more advanced DJ setups using the Traktor X1 MK3! kzbin.info/www/bejne/jZKpemhtm6h5sNk

[@Worrelpa]

A new Z1 mark 2 would partner this perfectly;)

[@workrelaxfoxuswithkenzo]

Love that DJ cable solution. Great idea.

[@brendansmith]

I used an X1 and Z1 together for years. It was a nice set up.

[@stephenjr2598]

can it connect ipad？or only can use on computer？

[@NativeInstruments]

For practical tips on how to make the best of your NI setup, please head over to our user community: community.native-instruments.com/categories

[@FabioFlorido]

Been using it with Dj cable in some very minimal scenarios and it did its job greatly!! Thank you guys

[@gal3sz]

I have the dj cable too but the volume in the headphone is a bit much.Any way to control?

[@DJShortCut187]

I'm looking forward to the next part! 😎

[@NativeInstruments]

Here it is! kzbin.info/www/bejne/jZKpemhtm6h5sNk

[@DJShortCut187]

Danke Euch! Habe ich schon gesehen. :-) Wird das neue Software-Update inklusive Daylight-Mode pünktlich zur Open-Air-Session erscheinen? Liebe Grüße nach Berlin!@@NativeInstruments

[@Jdjwjdjzbsjwbb]

Glad i still have my 2 x1 mk1. That design is perfection for 4deck setup

[@mfknrmxthebangmessiah6012]

Can we get a new Z2 with and updated gridding system though???

[@joste65]

Thanks! Looking forward to part 2 🙏🏻

[@NativeInstruments]

Thanks for watching! We just released part 2: kzbin.info/www/bejne/jZKpemhtm6h5sNk

[@drpajander]

What about the cheaper NI audio interfaces - can you listen the next track with komplete audio 1?

[@LaMagha]

I am considering purchasing the X1 Mk3, I like the clean look, the size etc . yet I am confused as to how to connect headphone, speakers and Mic . As far as I understand the X1 doesn’t come with audio interface . What do I need ?

[@galapardj]

Hi! I also have a problem with listening through headphones. Windows, Audio 6 MK2. I'm assigning port 3/4 for monitoring. On the master 1/2. I pressed the preview button on the X1 MK3. There is no sound in the headphones from the front panel. The sound appears only if the fader is set to 100%. But this is not a preview, but a mix signal. The CUE VOL button also does not work on the Z1.

[@NativeInstruments]

That's hard to fix from KZbin. If you have technical questions or need to report a bug, please reach out to our Product Support. To create a ticket for a support agent, please choose which category best describes your issue, then use the 'GET SUPPORT' button in the middle of the page. support.native-instruments.com/hc/en-us/sections/15449821909021

[@tadypetr]

Is it possible to do a full gig with a house set just using X1 + external audio interface? Or should I instead invest in a full traktor kontrol S2/S3/S4?

[@NativeInstruments]

For practical tips on how to make the best of your NI setup, please head over to our user community: www.native-instruments.com/community/

[@s100flo3]

it is totally possible

[@nunomaltez79]

I really like this form factor. Can you recommend this over the Pioneer ddj 200 to begin djing?

[@NativeInstruments]

We think so! Check out our blog on getting started with the Traktor X1 MK3 DJ controller: blog.native-instruments.com/getting-started-traktor-x1-mk3/ And our beginner’s guide to DJing with TRAKTOR: blog.native-instruments.com/djing-with-traktor/

[@nunomaltez79]

@@NativeInstruments that's very informative, tks. The only downside is i've been reading that ni and traktor stopped in time... Which is bad , because at least Traktor isnt a subscription....

[@HOLLASOUNDS]

Cool.

[@saintsteve]

Can you add a mic to any of these setups? I’m assuming the audio interface would be needed?

[@Sanny.V]

Hi, do you always need to select how you want to setup your deck settings? Or is it somewhere possible to save these settings? Thank you!

[@gal3sz]

To setup with an audio interface part: NI Audio 10 works?If yes how do you set it up?

[@jeremythompson6822]

When is the 9 for $99 sale?👀

[@ancestrallmusic]

bought one but i didn't know it didn't have a sound output drive. If I use it with my sound interface and a computer, can I set up a pre-listening? I have a SSL2, but if I need to buy a Z1 to do this, it makes more sense to just have the Z1. if I'm playing in a club I'll play on CDJS and mixers.

[@NativeInstruments]

The Traktor Kontrol X1 itself does not have built-in audio outputs for pre-listening. However, it can be used in conjunction with your main audio interface or sound card. In the Traktor software, you can set up a cue channel for pre-listening. This allows you to listen to tracks through your headphones before playing them live.

[@mick.bellinello]

Got the x1 mk3 and the komplete audio 6. I set up as described in video but get no headphones cue out. In headphones I always listen “master output”. I tried to setup out 3/4 for output and 1/2 for monitor. It works but this situation is bit strange. Can you help me? Thanks

[@vfifty9182]

Please a Video with DVS and only with the X1 MK3 for mixing. Theoretically an Audio-Interface with 2 Stereo-Input (4Channel) and 1 Stereo-Output, Headphone-Out for Cueing (or is a 4x4 neede for Cueing?). Time-Code-Vinyl controlls Track, but still Pitch-Bending possible with the X1, Mixing, Effects etc. with the X1. No additional Mixer needed. For mobile use, only the X1 and the Audio-Interface.

[@vfifty9182]

Turntable with Line-Out

[@vfifty9182]

Audio Interfaces: NI Audio 6 Mk2, Arturia Minifuse 4, Motu M4, Focusrite Scarlett 4i4, Presonus Studio 68C, Maya 44 USB, Universal Audio Volt 476

[@Chris_Love]

So now headphone jacks on the X1 huh? Thats a dealbreaker for me

[@scottfrost317]

A you make the left and right engage buttons pulse like a led meter?

[@Fjfgjfur]

Cool, but where new TK z4?😂

[@stellarmediacollective7953]

how can you adjust the TRIM of the track if the lower knob is set as the fader and the others as EQ?

[@constanttenou5535]

HELLO i have a windows 10 computer ,i have Mackie profx12(mixer), 2 powers speakers and the new Traktor X1 MK3. I set up everything but unfortunately i cant hear the sound .Could you help me or tell me the best way i can kook up everything? Thanks

[@NativeInstruments]

Sorry to hear you're having issues with the sound. Could you please get in touch with our support team directly so we can take a closer look? You can contact us through this form here: bit.ly/3tph62a

[@constanttenou5535]

thank you very much for your answer

[@ancestrallmusic]

Can I use the interface to pre-listen to tracks that have not yet been played?

[@NativeInstruments]

The Traktor Kontrol X1 itself does not have built-in audio outputs for pre-listening. However, it can be used in conjunction with your main audio interface or sound card. In the Traktor software, you can set up a cue channel for pre-listening. This allows you to listen to tracks through your headphones before playing them live.

[@ancestrallmusic]

​@@NativeInstruments do you guys have any video explain that ? I have SSL2 interface and I bought traktor x1mk3, but I can't find this. Could you help me ?

[@NativeInstruments]

For specific questions about setting up your rig, it's best to drop questions in our online community here: community.native-instruments.com/categories/traktor-software-hardware There are many Traktor users there who might have a similar setup and can offer you recommendations!

[@jesseREL1]

what's up with that hoodie though? 😍

[@swrpn]

Use the X1 + F1 individually as well as with the S3. At $300 lack of a headphone o/p and a sound interface is a very bad design decision. This has been done just to protect the old Z1. The X1 MK3 could have easily been a Z1 with effects or a Z1 MK3. A clear case of when commercials dominate product design choices.

[@joste65]

If I have 2 pieces mk3 is it possible to dedicate one as a mixer and the other to load tracks and effects? 🤔

[@NativeInstruments]

For practical tips on how to make the best of your NI setup, please head over to our user community: www.native-instruments.com/community/

[@Duvan_Prieto]

Pt is gonna take them 3 years frrr

[@dietermessiaen4721]

Can anyone help me setup with a focusrite audio interface? can cueing..... pffff

[@Thegogoface]

2nd part when? ;)

[@NativeInstruments]

Out now! kzbin.info/www/bejne/jZKpemhtm6h5sNk

[@gabrieleguastella485]

Hello i have some problem, like bug some botton. the volume botton look like is stock and after i push down more time is comes back to life. what you think is a problem of setup or my pc is run out memory? or other? pls help

[@NativeInstruments]

Experts and staff members are active in our community. Our customer care teams are also available via our help-center if you want to get in touch with us directly. www.native-instruments.com/en/community/ To reach our Customer Care team, please log into your account and submit a contact form for product support. support.native-instruments.com/hc/en-us

[@dopeNL]

How about a z1 MK2. Also I think its a little over priced 😢

[@luispaulorocha1477]

👹

[@TheTinkywinky3]

Stop this subtitle please.