Basic Funtions of UTY-RNNUM

This video is about Basic Funtions of UTY-RNNUM

[@mazda6owner816]

Thank you sir!!! I was finally able to set the timer on my Fujitsu thermostat. Apparently the contractor I used to do the installation didn’t think that my hard earned 17k that I paid him was enough for them to teach me how to properly use this equipment. I was left with instructions binder but most of the pages are covered in blood. I guess I wasn’t worthy of receiving a sanitary free instruction binder. Well anyhow after coming home to a cold room also many latex gloves disposed of after hours of reading the instructions on this unit.... you my friend were able to help me in just 2 minutes. Thank you Caleb!!

[@elioliban]

Hi , I purchased a Fujitsu split system two years ago, and it came with this thermostat. As you demonstrated, you need to use a light to be able to see!!, which is ridiculous. There's no backlight! I was very disappointed, I thought they sent me an old technology (back when the television was in black and white!),so I contacted both my vendor and Fujitsu, and they confirmed that this is the correct thermostat. Therefore, I'm interested in replacing the UTY-RNNUM with a wifi-enabled one. Could you recommend a compatible replacement? Thank you!

[@ShogunHART]

How can you get through the operation prohibited? I have a Simple Remote Controller UTY-RSRY and can’t change the sensor to enable. The manual is useless. Any advice would be appreciated.

[@timjustice229]

1. Thanks for the video 2. Thanks for the music

[@johnharrisonschulz]

When would I have to set the unit number? I have two air handlers connected to my Fujitsu outdoor heat pump. Both wired controllers are set to unit number 00. When would I have to set them differently? Main reason why I'm asking is, I installed a UTY-TTRXZ1 thermostat converter and everything is installed correctly, but the air handler does not come on. I'm wondering if I have to change the unit number using the old Fujitsu wired controller prior to installing the converter and a standard thermostat.

[@dudelebowski483]

Here is my take for the best cost and comfort. I live in the San Francisco Bay Area and it’s mid November. I Put my qty 3 min-split’s on “Auto” and “Econ” setting the temp to 68F. That seems to work w little complaints and is easy on the electric $.

[@germswill]

What thermostat would you recommend if I’d like to be able to control the AC from my phone remotely?

[@TrueVixion]

Thank you so much. I was suffering from the wrong settings being on.

[@Misakyanovich]

So when it's super hot outside, I have to set my mode to snowflake? What do I do with temperature and fan speed ?

[@suemount64]

Can you tell me if this is supposed to have a LCD backlight? It's so hard to see we have to use a flashlight to see the settings!

[@petegolomb3591]

No, it is not backlit. They should have included a flashlight with this model since one can only read the dial under ideal light conditions. This model also doesn't show the room temperature. The model that is backlit and shows the room temperature is UTY_RVNUM.

[@kwhite145]

@@petegolomb3591 No backlight sucks

[@fishski941]

@@petegolomb3591 thanks for the info. Hard to believe they didn’t include two of the most basic functions found on just about every electronic thermostat made in the last 20 years.

[@sharifsharif1619]

Well, I have a question and general, why does it stop after 3 minutes, what else can be the problem, I want to go, and the fan coil shuts down, why?

[@videos10]

Does this thermostat not have current indoor temperature ?

[@robertproctor5729]

Hi how do you remove panel as it has gone yellow and would like a new cover

[@snookers1433]

What do the buttons w the arrows pointing in different directions mean?

[@menenilesh2482]

How to change farenhit to celsious? Please tell about this

[@gonzalomanzaneda7633]

Thanks a lot for the video! Do you know if its possible to set the ac the same way but for two different time periods? I would like to active the ac in the morning stop it during the day and turn it on again during the evening. Thanks in advance!

[@UberAV]

I don't know. You're welcome from behind.

[@mariamarias1630]

Thank you so much, i ve been struggling for a while with my machine hahahha

[@bra2il]

Dpes anyone know if these panels can be controlled via IR remote???? , and if so whats the model name? Thanks

[@USA-GreedyMenOfNoIntegrity]

You use one or the other to control your mini split.

[@sahiljuned3762]

Hi sir i need maximum temperature change setting have possible??

[@Rodador24]

Is that the Great Jazz Trio playing Nardis?

[@mrfabian185]

Thanks 🙏🏻

[@helaine8064]

this is very clear except that I don't understand how to set the temperature during programming. For example, if I want the unit to come on at 6:30 a.m., how do I program at what temperature?

[@ellendouglass5220]

I would like to do the same on our unit, so that we can set the timer for the unit to start and stop at certain times of the day. Please help if anyone knows how to do this.

[@verygood12]

Anybody knows how to change the date, time and day of the week in this thermostat?

[@dudelebowski483]

Yes, hold down top left button labeled “clock adjust” on the bottom of the button. U should be able to figure it out from there to set both time and day. The confusing part is the same top left button says “timer mode” don’t pay attn to that 😎

[@staceystudy982]

What if there is no symbol or turn on

[@videos10]

How come it doesn't say current temperature ?

[@aadilmehmood3059]

helo sir plese one video make the o general duct ac remove er cod in thermostate

[@johnjohn-cs9eu]

Anyone know why key symbol. If its "locked" how do l unlock?

[@lyramaravilla9849]

I’m having the same issue currently!

[@alexisbreona28]

Here I am in 2024 thank you soooo much

[@CarlosEmilioPujalsKury]

is there a way to factory reset the control?

[@roroiboni7401]

Thanks dude

[@johnjohn-cs9eu]

H e l p ... l cn see the obvious functions but cannot get out of key symbol /feature/function

[@AnwarAlam-kk8se]

How to panal

[@ranadanish648]

What problem Er error code

[@ranadanish648]

Plz helm me

[@andressanchez4401]

Como cambiar la pila

[@juliarobles6363]

En español pofabor

[@juliarobles6363]

No entiendo el idioma

[@marinoveronique8021]

En français svp

[@zb1307]

How do I program limits on the min and max temp?