Bass Tracker Boat Wrap | How To Vinyl Wrap Your Boat!!!

Today I wrapped my 2021 Bass Tracker 175. I go over each step on how to vinyl wrap a boat and the tools and materials you will need!
(Complete Guide to Vinyl Wrapping your Boat)
Boat: Bass Tracker 175 Pro Team TXW
Wrap Material: 3M IJ180 Cv3 - Printed with Latex HP365
Wrap Laminate: 3M 8418G - High Gloss Laminate (1.5mil)
Tools You'll Need to Wrap:
75% Isopropyl Alcohol - To Clean Boat
Paper Towels
Masking Tape
Application Tool - Felted Squeegee
Olfa Blade - Preferably a Carbon Blade 45 Degree
Torch or Heat Gun - For Install & Post Heating
3M Tape Primer 94 - Pre Wrap
3M Edge Sealer - Post Wrap
Check out Raptor Wrap & Sign at:
raptorwrapandsign.com
IG @ / raptorwrapandsign
Mention: RAPTOR10 from Bent Rod Bassin YT for 10% Off!!!
BECOME A ROD BENDER 🎣 bit.ly/2K5JFVn
INSTAGRAM: / bentrodbassin
#basstracker #boatwrap #howtowrap #teamraptor

[@chrisaliberti457]

Wow that looks awesome!!

[@sarahdigby1346]

That looks sooooo good! Now I want to wrap my boat! Great video 👍

[@BentRodBassin]

Absolutely!!!

[@darrenpritchett1516]

Awesome, brother. looks great.

[@rougetrader8]

Nice work! Thanks for your efforts!

[@BentRodBassin]

Thanks for watching!

[@Venomthegr8]

Finally found the Bob Ross of boat wrapping

[@DIDGZONEW]

Great Job! Thanks for sharing!

[@sunsetadventures5329]

Looks Great. I didn't even think about doing something like this to my tracker. Thanks.

[@BentRodBassin]

It’s a great paint protector or makes an older tracker look new again 😎

[@MartinRodriguez-gx9cs]

Great job, u have me thinking about doing my tracker now.

[@BentRodBassin]

It’s a great investment, save my paint a few times already!

[@ladycruiser65]

Awesome Job❤

[@BASSNGRASS]

Man That looks really good

[@BentRodBassin]

Thanks! Came out real nice 👍👍

[@TM-ct1sg]

I want you to know, I wrapped the top rail of my 190 tracker and followed your video to the T. Thank you, what a great job of explaining you did, perfect! Will be doing sides soon.

[@BentRodBassin]

Nice!!

[@braintrustoutdoors8183]

Man bro you did it! Remember we bought our boats around the same time and we talked about your wrap plans. I dig it! Wish you had pics or a walk-around of the whole completed wrap. I kinda see it in your other vids. Question: Are you gonna paint the console to match? If you are ever near WA I'll airbrush it for you. I did Brian Lattimore's (BLatt) - and sneakers and a few crankbaits for him.

[@pardselmertv]

Wow its very nice design of vinyl wrap.i really like it.may i know where i can buy that?

[@ReapeR2129]

NICE!

[@BentRodBassin]

Ready to rip some lips!

[@r24sanchez]

I have a boat that is a black hull with stickers. How does your wrap work wrapping on top of your existing logos?

[@Vbokisha]

Will it bond on sanded 2500grit or need to be polished surface. And is foil good aginst algee?

[@rudyvaldez4902]

Your pretty good at making these videos you ol blueberry

[@ovrlndtravel]

Awsome vid 👌🏻! I have 2016 Pro170 that I would like to wrap, Do you sell the wraps and ship them for a do it yourself kind of proyect?

[@BentRodBassin]

I don’t, sorry.

[@cougar281efs]

Looks great Nice video Any problems going over the original decals? Car you see them after the wrap is on?

[@BentRodBassin]

You can layer over the decals with no issue. They are slightly embossed under the wrap.

[@justincooper7497]

Where you popped the pin holes to release the air bubble would you put sealer over them

[@BentRodBassin]

No sealer needed, just post heat and your good to go!

[@marklopez8378]

That's badass bro, would this work on an older aluminum bass tracker? Thanks for the vid

[@BentRodBassin]

Absolutely!

[@vicwalter9918]

Were can I get that wrap

[@TM-ct1sg]

How do you apply sealer to the edge if you cut the wrap flat without overlapping to the bottom?

[@BentRodBassin]

Just wipe it on, vinyl to hull

[@chadpearsall7398]

How is the wrap holding up under the waterline? My black tracker needs paint, but I may try to just gloss wrap it over painting, do you think it will hold up long term?

[@BentRodBassin]

Still like brand new, I wrap boats professionally.

[@vitovaldez7470]

Did u have to cut around the hull numbers ? Great video 👍

[@BentRodBassin]

Replace with new decals ✌️

[@FishingLifeTV225]

Do you do this for a living?

[@reelchristianfishin7397]

Did you not want to take the Tracker graphic off?

[@BentRodBassin]

Kept it on for resale value.

[@Jesse-jc4vv]

Sick shop dude, what dolly do you use to move your boat around inside the shop?

[@BentRodBassin]

I just roll it around, it’s not a double axle.

[@Jesse-jc4vv]

Thanks

[@bobreichel]

is there a difference between car wrap and boat wrap material?

[@BentRodBassin]

There are different wrap materials but 3M IJ180Mc-10 was used on this boat, and can be used on vehicles as well. Side note, the gloss laminate is 3M 8518.

[@mikebartolini2918]

I’m looking for a wrap for my bass tracker any recommendation

[@BentRodBassin]

Raptor Wrap And Sign in Rogers. 👍

[@scottcozart8950]

I bought a brand new tracker today. can I bring mine to you let you wrap it??

[@BentRodBassin]

For sure, check out Raptor Wrap and Sign in Rogers. 🤙🤙

[@TM-ct1sg]

Can you put knifless tape to primer and still use the tape to cut?

[@BentRodBassin]

Yes it works well on top of primer 94

[@TM-ct1sg]

Is it difficult to remove the plastic casing around the cut tape once it’s put over the primer.

[@robertsimcox8185]

How much did the printed wrap cost or did you print it yourself?

[@BentRodBassin]

Depends on the shop, $8-$10 a sqft normally for 3M-IJ180

[@WONofAkind]

What different steps for wrapping fiberglass?

[@BentRodBassin]

Same, as long as the gel coat is in good condition. No oxidation or roughness, needs to be slick to stick 🤙

[@SeeLifeBro]

How much should it cost to have someone print out a wrap like yours to install it yourself? I have the exact same boat but white and your wrap looks super legit. I want it 😆

[@BentRodBassin]

Depending on design cost, I’d estimate around $700 👍

[@SeeLifeBro]

@@BentRodBassin thanks man super cool!

[@scottyablonski1740]

@@BentRodBassin what state are you in

[@richurban659]

Hey bud where u get ur wraps from

[@BentRodBassin]

I design them, and Raptor in Rogers prints them for me.

[@timbrown479]

What would something like that cost shipped?

[@BentRodBassin]

Most places are 100$ per linear foot.

[@TM-ct1sg]

Question: so you just trim to rub rail.

[@BentRodBassin]

Yep!

[@BentRodBassin]

No need to silicone, unless you need too.

[@michaelj8067]

Where did you get the wrap?

[@BentRodBassin]

Raptor Wrap and Sign in Rogers, AR.

[@eduardomendez3800]

greetings friend, how can I buy that for my BASS TRACKERS

[@BentRodBassin]

Come on by an well get you taken care of 🤙

[@walleye56789]

How long does a boat wrap last?

[@BentRodBassin]

They average 3 years, depending on usage and sun exposure.

[@jeremys636]

What would something like this cost?

[@BentRodBassin]

Depends on the shop, material and design time.

[@johnny_jgs2435]

Hi it's same vynil as car wrap?

[@BentRodBassin]

Yes, it is.

[@johnny_jgs2435]

@@BentRodBassin thanks

[@Harlanmote]

Try one with rivets and a rib down the side. It took me 2 hours per side on an 85’ 18’Alumacraft. I didn’t use any seam sealer mines been on for 2 years not a pealed place on it. I cut it 1 inch above the bottom of the boat. Putting on a wrap is not for a beginner. I only used the heat gun on the rivets.

[@BentRodBassin]

Rivets are definitely fun, good times!

[@Codyeye]

3m Knifeless Tape......