How to rebuild a Honda distributor

[@kenelder9615]

use a very good philips or japanese JIS to unscrew the rotor cap, it can be on very tight

[@CorpseFreak]

I need a good JIS honestly

[@thanhdang2546]

Is there a camshaft position sensor inside the distributor? Thanks in advance.

[@CorpseFreak]

@@thanhdang2546 yes

[@harveyyork8370]

Nice work bro

[@tsheposenong9081]

Hello guys any information on how to solve no spark problem on this distributor. The coil was in bad shape I replace it then I notice that the igniter is not igniting the coil what could be the problem coz even on the injeter wires I don't get signal but only power??

[@CorpseFreak]

@@tsheposenong9081 that could be an ECU issue

[@tsheposenong9081]

@CorpseFreak ohk thanks will check it 🤝

[@wkboyy4573]

hey so I accidentally snapped the dog ear on the drive dog and want to replace it and I see that you marked the orientation to put it back on but I was wondering how I could make sure I have the correct orientation on a completely new drive dog that im going to replace the old one with? thank you in advance

[@CorpseFreak]

If you put it on backwards the car won't start. I don't really have a great way to tell you man. I'm just a dude making videos sometimes I'm not a shop or anything.

[@axmadrigal1]

good video but I would have changed the bearing too while you're in there

[@CorpseFreak]

Will keep that in mind for in the future

[@h.m4612]

You know very well

[@CorpseFreak]

lol

[@SauceLyo]

At 8:22 how donyou know you didnt put it 180 off does it matter ?

[@CorpseFreak]

5:37

[@DatJere]

GREAT VIDEO ! QUESTION: has the shaft some movement like axial o radial?

[@CorpseFreak]

A tiny bit of shaft play

[@leorivera1372]

There should only be one washer when pulling out the pin? Mine had a lot of play, side to side when moving it so i thought it needed 2 washers?

[@CorpseFreak]

This was an untouched dizzy. 1 from factory.

[@leorivera1372]

@@CorpseFreak okay thanks was trying to find out where the leak was

[@leorivera1372]

@@CorpseFreak sorry for the question, had to ask since I opened a distributor on a accord and it had 2

[@CorpseFreak]

@@leorivera1372 no worries man! Every dizzy I have ever seen has been one. Haven't touched many accords though I'm actually working on fixing a hacked together obd1 to OBD2 ecu right now

[@marilynmelendez8256]

What if you clean all the seals could it work?

[@CorpseFreak]

@@marilynmelendez8256 no. It will still leak.

[@DadTimes]

Hi! Great video! Is this for a ‘95 civic dx ej2? Thank u!

[@CorpseFreak]

@@DadTimes it would work for any d or b series.

[@DadTimes]

@@CorpseFreak thank you!

[@808breaks]

Will the ignition coil you have in the link as the JHD500 fit and work on a 99 civic obd2 B distributor?

[@CorpseFreak]

Just saw this. Let me take a look

[@CorpseFreak]

If you have a 99 SI Which I think the Engine is the B16 then the ignition coil OEM part number is 30510-PT2-006 which is on the link I posted. you can find oem part numbers at hondapartsnow-dot-com

[@SG901]

HELLO: can i ask whats the meaning off the spring you put back in the coil: ,mine dit not have the spring and i put another spring in there: is it possible that without the spring the coil not fire* greetz from belgium

[@CorpseFreak]

Yes. Spring is Needed for fire. It's closes the gap from coil to cap.

[@SG901]

Ok thank you for the information. Greetz geert

[@jom7796]

(whisper) that’s what she said. Lmao that was funnyRandom!

[@CorpseFreak]

She liked it too

[@ivanr5436]

What can i do if the pin doesn't slide out? Its stuck in there but your video and others it just gently slides out

[@CorpseFreak]

Did you take the lock ring off?

[@ivanr5436]

I did. The pin is loose on the outer key but somehow stuck towards the center of the shaft. I tried lightly tapping but nothing

[@dekonfrost7]

Called engineering

[@CorpseFreak]

lol

[@malemex2002]

Sloppy

[@CorpseFreak]

Glad you enjoyed it!

[@joseordonez3422]

The cuestion is is go a work becouse i have replace the coils the ingniter several other things and it stil don work for yoy tb crerible you need to put it on car and started

[@CorpseFreak]

@@joseordonez3422 I have no idea what you just said lol. It is on my car though and I use it Everytime I drive the car. Also other people had success with my video. This sounds like user error to me my guy