Enroll in course, don’t learn things the hard way! bathroomremodeling.teachable.com/p/tub-to-shower-course
@bobscaping2 жыл бұрын
Thanks for the drill bit advice, I was recently faced with a choice when buying a hammer drill bit for masonry, afraid I didn't keep it cool, but it lasted the job at least!
@juventusventuno9213 Жыл бұрын
is that ideal blocking for a 200 lb person? seems it would stress the tile & grout quite harshly
@taxicamel Жыл бұрын
I am only now investigating these folding seats for a shower application. The "blocking that you are asking about ....IN THIS VIDEO... is actually very poorly done because this is the most important part of this product and the entire success of the end result. It is very disturbing that whoever has done this video, has "fast-forwarded from 0:07 and at 0:10 ....three seconds later .....which is more like 15 minutes to 30 minutes of work ....TO PUT THE BLOCKING IN PROPERLY .........AND THERE IS NOTHING TO SHOW THIS VERY IMPORTANT STEP ........which is the point you are asking in your question .......hence the question. To make things even worse, this guy admits that the blocking that he put in was not high enough!!!!! WTF???? That one admission make this whole installation a 100% fail in my eyes. WHY WOULD ANYONE POST SUCH A COMPLETE FAILURE??? This guy is no "professional". If there are four screws per side .....YOU MAKE SURE THEY ARE USED. And the worst thing about his "blocking" is that it actually NOT blocking!!!!!!!!!!!!!!! It's just plywood!!!! HOW THE HELL WAS IT ATTACHED TO THE STUDS????? BLOCKING IS 1-1/2" SOLID WOOD. THIS INSTALLATION IS 100% COMPLETE GARBAGE. Over time, the tile will be either start micro cracking or the grout will start cracking and separating. .
@wilcoxtactical37162 ай бұрын
Doesn't this pull on the tile? Seems like it would pull the tile off the wall or break.
@jxtdenco69842 жыл бұрын
What size diamond bit do you use for a 1/4 screw? Same size as the screw or bigger? And how far into the blocking should the screw go? I'm not sure what length screws to use and the bench didn't come with the correct type of screw. Thank you.
@timknapp6388 Жыл бұрын
So, this is a video about how not to install a bench..... thanks for the tutorial
@Fixerofthings5552 жыл бұрын
Plywood isn't ideal for blocking. I say this as a professional bathroom remodeler. Blocking should be 2x4s. Don't even get me started on the goboard.
@BathroomRemodelingTeacher2 жыл бұрын
You ever use the 2 x4s at depot 😆
@taxicamel Жыл бұрын
YOU ARE 100% CORRECT. THIS GUY IS A COMPLETE CLOWN. .....PARTICULARLY AFTER READING HIS RESPONSE TO YOU. .
@Ticonderoga122 жыл бұрын
Question i wanna build a knee high wall and place the same foldup seat on that wall, how shud i build that wall so it can take the weight of someone seating on the chair?
@BathroomRemodelingTeacher2 жыл бұрын
A knee wall would be much tougher to support laterally. Definitely need to anchor wall to joists below to prevent movement. I unfortunately do not have a video on that one. Here’s one over concrete kzbin.info/www/bejne/lWmZip-sobCHntE
@Ticonderoga122 жыл бұрын
@@BathroomRemodelingTeacher thanks!
@taxicamel Жыл бұрын
@@BathroomRemodelingTeacher BULLSHIT to your answer. THE OPEN END OF THE KNEE WALL PROVIDES NOT SUPPORT FOR ANY KIND OF A SEAT ...SOLID OR FOLDABLE. If the wall was solidly attached to something at BOTH ENDS .....THEN .....IT WOULD BE SOLID AND DOABLE. YOU .....DON'T SEEM TO KNOW TOO MUCH ABOUT ANYTHING!!!!!!!!!!!!!!!!!! .
@francisf4175 Жыл бұрын
So I did a bathroom about 9 months ago customer tell me the paint peeling off the Bench
@marcodevries44816 ай бұрын
Thin sheet of plywood with a few finishing nails??? Good luck to the user
@BlueCollarZach Жыл бұрын
What happens if you only have blocking on the bottom screws and the rest only drywall?
@BathroomRemodelingTeacher Жыл бұрын
I’d say at least hit 3 out of the 4. Not sure how comfortable I’d feel for less than that
@BlueCollarZach Жыл бұрын
@@BathroomRemodelingTeacher I thought the same, just needed some reassurance from the pros, thanks!
@taxicamel Жыл бұрын
@@BlueCollarZach .....THIS GUY IS NO PRO!!! GO TO SOMEONE ELSE IF YOU REALLY NEED SOME ADVICE. .