Battery Management Using Active Cell Balancing MATLAB/SIMULINK

[@HigherMeditations2007plus8]

File/code available for purchase. Contact me on ig instagram.com/hm2007plus8/

[@ratinaamalaapselvaraja5376]

"The voltage source block 'Battery/Controlled Voltage Source' cannot be connected in parallel with the capacitive element defined in the block 'Series RLC Branch'. Add a small resistor in series with the voltage source block, or with the capacitive element" Hi, sir..I don't get it why I'm getting this error? I followed exactly on how u did.

[@mamo2652]

if this is active balancing why an external dc source is used? please correct me if i am wrong only the batteries should be connected in such a way that they equalize their SOC

[@shiwangisonowal2531]

Why do we use the capacitors if we are using the inductor as energy storage element

[@aryamotegaonkar7978]

how do we get this battery model? I cannot see it in my simscape library

[@kshitijapatil5552]

can you tell which connections made here are parallel and which are series. and, is capacitor connected across diode?

[@HigherMeditations2007plus8]

only the cells are connected in series. D1,C1, and S1 are parallel to the top cell while D2,C2 and S2 are parallel to the bottom cell,

[@annelizabethbabu1733]

can you please make videos on soc estimation methods

[@HigherMeditations2007plus8]

I'll check see about that

[@HigherMeditations2007plus8]

I'll see about that,

[@Eeraj_123]

Which is better for Mtech project? Two cell or Four cell? Please reply bro. Love from Hyd❤

[@HigherMeditations2007plus8]

Depends on how far you want to go

[@greeshmagurana4550]

I'm getting an error in bus selector at pwm that"2nd port us not connected"

[@nimeshjadhav4859]

Where we have to connect the demux output port 2? Because of that one output port error occurred

[@HigherMeditations2007plus8]

Don't connect the port to anything

[@HigherMeditations2007plus8]

If you're getting an error it's probably due to a different cause,

[@nimeshjadhav4859]

@@HigherMeditations2007plus8 but there it's showing its because of output port 2 is not connected

[@nimeshjadhav4859]

@@HigherMeditations2007plus8 & if the port is not connected to anything the output is not coming...

[@HigherMeditations2007plus8]

@@nimeshjadhav4859 Not really, you can connect the output of the demux to a scope and you'll still get the error.

[@mugeghaleb8631]

thank you for your help

[@HigherMeditations2007plus8]

You're welcome

[@akshaydeshmukh760]

Please give the research paper which you followed for this by today.

[@Farwa-u1w]

How can we make the same simulation for three cells? Please let me know.

[@HigherMeditations2007plus8]

Contact me on ig

[@naturebeauty5731]

Can you please explain how S1 & S2 gate pulse are working..?

[@HigherMeditations2007plus8]

Please check the video description section.

[@naturebeauty5731]

@@HigherMeditations2007plus8 I mean through waveform what is happening and detail analysis of how the circuit is working internally.

[@naturebeauty5731]

When we keep Soc1=90% and Soc2=80% ; both the batteries are balancing at 82.5% instead of settling at 85%. Where is 2.5% energy is getting loss...?

[@pratyaymaity5809]

have you got the ans ? if so please share the reasonj

[@ranjithkumarv8186]

0

[@akifkacar93]

How can I implement this system for a 4-cell simulation, how should I place the diodes? Thanks.

[@HigherMeditations2007plus8]

Contact me on Ig for more info

[@maheshmelage5481]

Thanks sir

[@Iamvysh02]

I'm getting an error in s1 and matlab function.. 🙂 what should I do

[@naturebeauty5731]

why resistor is used in active cell balancing?

[@HigherMeditations2007plus8]

The resistor acts as a load to simulate cell discharging,

[@mogahed2013]

How we can make the same simulation for 4 cell or 8 cell,,,, please help 🙏🙏🙏

[@HigherMeditations2007plus8]

Check kzbin.info/www/bejne/rpuUdYGJg5JsfsU

[@pandu7820]

can you explain the diagram and working process pls

[@HigherMeditations2007plus8]

Hello, check the video description please

[@ranjithkumarv8186]

no way

[@prathmeshjadhav6777]

Can you make voltage based model instead of soc based model for active cell balancing. If yes then please make that model I will purchase that file for reference.

[@HigherMeditations2007plus8]

Sure