Battery powered DCW210 Dewalt orbital sander Review by DC Super Shine

Awesome little sander!
Battery powered DCW210 Dewalt orbital sander Review by DC Super Shine
Let me know that you guys think thanks for watching.
Video: Jack Sliter
Editing: Jack Sliter
Facebook: / dcsupershine
Instagram: / dcsupershineofficial
Tiktok: vm.tiktok.com/...

[@shauncason5235]

Already have other Dewalt 20 volt stuff, so the tool only was just over $100! Thanks for the heads up on this, Denis!👍🏻

[@DCSuperShine]

Np at all enjoy!!!

[@aerocam2]

Great review of the DeWalt sander. You convinced me to order one today. More importantly, I have a question I was hoping you could help me with that pertains to the small amount of non-commercial aluminum polishing I do here in my shop. I’ve been using the Zephyr system with the yellow/orange first cut wheel, followed by the green/purple, and finally the white. The three bars are the the ones that came with that kit.....more specifically the Tripoli, green joker i thinks it’s called and finally the blue moon last. My problem is that (especially the first cut and the color tend to leave a lot of residual spots of bar material on these motorcycle wheels (billet aluminum) that I can’t seem to get the wheel to cut off. I can remove it somewhat easily with a microfiber cloth but as soon as I get back on it with the polishing wheels it starts again. It’s as if the bars were too “greasy” of a compound maybe. I using a VS Dewalt polisher (600-3500rpm?) ive tried more pressure, less pressure, lower rpm, higher rpm, more frequent raking, more compound, less compound, etc and can’t seem to figure out what exactly I might be doing that I need to change to minimize this issue. If you have a minute sometime....I’d really appreciate, and be willing to try any suggestion(s) you might have to make things go smoother. I know you’re an incredibly busy man but if a quick call would be easier for you, I’d certainly be open to that as well. I promise to be brief. Thanking you in advance for any help you can offer. [phone]. Mack L.

[@DCSuperShine]

just saw this now... I'll give you a call soon! thanks for watching

[@vunit8213]

I got same one, and use to sand before polishing especially on tanks…just ordered the XR die grinder with 1/4” shank and…I also have my eye on the Milwaukee M18 rotary variable speed polisher for those quick jobs where you don’t want to drag everything out…no cords certainly makes things a lot easier and those 20V batteries sure came along way! 👍

[@DCSuperShine]

👍👍Thanks for watching! Much appreciated :)

[@bush600r2]

Nice. What diameter sized paper you running on it please? and what diameter size is the actual sander too. Thanks

[@DCSuperShine]

Sander is 5 inch and I always use 6 inch paper. Thanks for watching! Much appreciated :)

[@Er_polishing]

Hey brother do you sell your own sand paper ?

[@DCSuperShine]

I do yes but currently still on back order 🙄Thanks for watching!

[@danielkilpatrick5860]

Thanks for the info Denis! Bought the millwaukee one a few weeks ago. Hopefully it performs as well as the Dewalt!🤞🤞

[@DCSuperShine]

Cool 👍Thanks for watching! Much appreciated :)