Battle of the Servo Reefs 300 vs AGF-RC A81BHP vs AGF-RC SA33 in Redcat Racing SixtyFour Lowrider RC

[@kevinnkadeslowrideraddicti216]

Im new to the RC world.. I must say these cars are very addictive.. Not only did I buy the Red64.. I also bought a 1/10 skyline R34 drift car..Both amazing and Thanks for lessons..Keep it 100!

[@michaelcargillsr.8818]

I'm new as well I'm waiting on my 64 redcat to arrive

[@6ickness1]

get ready it gets worst🤣🤣🤣

[@kevinnkadeslowrideraddicti216]

@@6ickness1 - Indeed, just bought another one..the Redcat Monte

[@6ickness1]

@@kevinnkadeslowrideraddicti216 i got that baby its on my page can't wait to see what you do with it

[@small_bore]

I have a some reefs 300 servos that when hooked up to the reefs programmer the servo information identifies them as A81BHP and some identify as 300A. All of them were purchased directly from reefs or amain.

[@chatobalencian1504]

Nice vid bro any info on servo horns and rear shock s and part # are they internal spring and oiled or no thanks in advanced bro very nice setup

[@NorthSideCustomRC]

Thanks for the support :) Yesssir, got a vid coming up where Ill go though the lil details of the set up, servo horns in alloy for all servos, and alloy rod ends for all suspension links and steering arm + jumper arm. Next video on channel already for the shocks but a update is coming for more scale look but same style set up

[@chatobalencian1504]

@@NorthSideCustomRC oh ok great cant wait thanks for quick reply

[@servoagfrc6267]

Wow, such a awesome video.

[@RC_BASSBOY]

What Brushless motor setup you running ? You have a link or video about your setup ? Would like to get rid of this brushed stock setup lol

[@nicolasaispuro4895]

Do you need to run lipo battery with all these modifications

[@NorthSideCustomRC]

to really get the performance consistent yes

[@nicolasaispuro4895]

@@NorthSideCustomRC new to this ,learning as i watch 👍

[@NorthSideCustomRC]

@nicolas aispuro welcome to the RC lowrider game. Usually, FB groups trash, but Redcat Lowriders FB group has lots of peeps and can get a lot of ideas n inspiration. Also, see what people are doing. Worth a look at if you are new in the scene and want an idea what we up to

[@pontiacaztec917]

Nice thanks for share may you cruise with style!.

[@24Krawlers]

Do I need any BEC’s with these servos? Or Can I just plug n play to a stock sixtyfour?

[@NorthSideCustomRC]

I suggest a Castle BEC 10a minimum.. you don't need a BEC for basic operations but if you going to get on the servos hard they pops harder with a BEC

[@RickyTbo76]

What kind of shocks front and rear are you using and where did you buy them?

[@NorthSideCustomRC]

modified crawler shocks, there is a video about them on my channel, but update on them using this style set up on scale look coil overs, video coming soon, as well as a upgrade for the jumping servo, fastest servo I ever seen

[@B_Skeen]

what do you think of the A80BHP-H? Specs say .030 sec. at 8..4v, that is pretty quick and torgue is decent too.

[@NorthSideCustomRC]

in real world them numbers hocus pocus. I contacted AGF and they say they measure the Helly gears different and that 0.03 must be at like 30 degrees not 60.. The servo is a bust IMO and make me skeptic for any Helly servo specs, I have testing video with that servo

[@NorthSideCustomRC]

kzbin.info/www/bejne/gouQd3acrcuqbLc

[@EseSmokeysCustoms]

So the Monte carlos are different it has two front servos and then 1 steering servo then 2 servos in the back I know I should cange the 2 back but do I have replace the 1 in the front or both

[@NorthSideCustomRC]

The Monte needs all servo upgraded, it's just lethargic on stock servos

[@EseSmokeysCustoms]

@@NorthSideCustomRC do I use 23kg servos for 2 servos in the front then 2 33kgs for the back right?

[@NorthSideCustomRC]

@@EseSmokeysCustoms that's how I have mine A81BHP up front and then SA33 in the Rear. She hits hard.

[@EseSmokeysCustoms]

@@NorthSideCustomRC then ima gona have to save up for them because damn

[@NorthSideCustomRC]

@@EseSmokeysCustoms Gimme a week might have a 50$ option that close to Gold Reefs 300

[@jimmorrison5574]

I want to try the savox SB2291SG 0.042sec / 347oz @ 8.4V

[@NorthSideCustomRC]

That be worth a go man, sounds like its Banging least on paper

[@6ickness1]

ok ok ... great video

[@MrLazlness]

The reefs 300 aquivlle my shnizzle foshizzle my nizzle drizzle

[@michialjackson536]

Reffs 300 in black come on sivox ya can't polish a turd you can rub it from yellow to black

[@TheSpaceCoupe57Chevy]

Reefs 300 that comes with redcat is the same shit that he sells He told me the reefs that comes with redcat factory was not programmable and it is Hes a liar and sold me the same servo in a black case Thats a whole ripoff