BBBs02e27 | Mikunioz.com Velocity Stacks & Crank Case Breather Install, Re-Jet & Test Ride | XVS650

[@jeffsinfield2085]

Not only has that made a difference to the way she runs but that really gives a great clean look. Thumbs up.

[@iRidetas]

Thank you! I liked the filter but not so much the big intake! I'm really please with this!

[@fredrikhllstrm349]

Just got my bike back from dealer. They hooked it up to a co2 gauge. With podkit 130 main jet 27.5 pilot jet and needle clip on lowest notch. It was still running a bit lean on full throttle. So if people go for this set up consider 135 or even 137.5 main jet....👍

[@iRidetas]

Good info mate! Thanks

[@Ekorslk]

I build a shadow 600 with alot of help from LNSPLTBLVD, I now own a vstar650 and I can’t find ANYTHING on it. This helped. Thanks man, I’m subscribed.

[@iRidetas]

Cheers mate, hope you enjoy the content!

[@TheTopCat650]

Love how your bikes turning out, keep up the great work and thanks for all the useful information 😇

[@iRidetas]

Thanks mate! 👍👍👍

[@owenbowman9275]

I like the look of a filter on the side of the engine. I put a 76mm spectre filter from autozone on mine. And made a nice support bracket for $50 total. That’s with the purchase of a 3“ hole saw bit.

[@iRidetas]

Yeah I liked my filter but not the intake piping! Cheers mate!

[@antw3565]

Looks and sounds great. My favourite of your builds.

[@iRidetas]

Thanks mate, I'm really happy with how this bike goes and looks!

[@GASSER1525]

Mate thanks for these videos I am going to get a vstar for my ls in October and build out a springer vstar thanks mate for these videos mate for information and knowledge so I can pass that on when I can get one

[@iRidetas]

Cheers, enjoy your bike!

[@MRTPR]

Hello Mate and greetings from South Australia, great channel and awesome bike. The roads look fabulous and the bike sounds great. Take care and stay well.

[@iRidetas]

Gday mate! Some amazing roads in Tasmania! And thsnks for the kind words!

[@meckkz387c]

I can’t believe how fast you got yours

[@LebaneseRed]

Great video , lots of information throughout 👍 wanted to to know if you experienced lots of noise or vibrations going over 120 kmph or about 4800 rpm on 5th gear ? Current setup : cobra slip ons , stock pilot jet , 130 main jet , pod kit air filters , 3.5 turns out. Im not happy with the performance on warm days and im switching to K&N clamp on as Im hoping it will breathe cooler. Im using your other video and setup when i switch from pods to the k&n

[@iRidetas]

Nope, the bike is smooth as silk right through the rev range and right up to make speed! Cheers

[@michaelpassionsgarage356]

Where did you buy the jets from? and what do I type in to find them mate?

[@iRidetas]

Mate, its the title of the video, it's in the video and the description!!

[@pellelongo2480]

. I have aftermarket vance and hines exhaust and have a bit of backfire popping but I want . My bike to sound like yours I'm just on ebay looking For the right jets and pilot. I know it's a BDS28 28MM TWIN CARBY or is there a series model /series number for this carby to get matching pilot a d mains .?

[@Moz42]

Just come over from Guvna 947. Cheers

[@iRidetas]

Thanks mate! Welcome

[@Viper6-MotoVlogger]

Looking good mate.

[@iRidetas]

Thanks, goes well too!

[@mullaway5746]

Hi mate i just got a 650 any idea why someone would disconnect the hose that goes to the bottom of the air filter bowl and block it off ?

[@iRidetas]

Sounds like the stock layout mate, if its straight down say 6 oclock from the dog bowl air cleaner

[@mullaway5746]

@@iRidetas yep but is it supposed to be connected to the bowl at 6 o'clock or blocked off at the hose ?

[@iRidetas]

Stock i.e the 6 oclock pipe is connected to the dog bowl the other end is blocked

[@mullaway5746]

@@iRidetas ok cheers mate

[@rodrocket8216]

Sounds great Cobber, looks cleaner too. Seems like you've gotta stop yaself from gettin on her alot more. Did you lose any bottom end? Have you been trying the digital tacho on her between mods, to see power band movement?

[@DannyRed-mq6lc]

Are they 125 pilot or #25 ? Your description says 25 but in the video you say 125

[@iRidetas]

#25 pilot and #130 main

[@DannyRed-mq6lc]

@@iRidetas thank you for your reply! I have an air leak somewhere in this air box or filter, I’m just gonna toss it all and get pods and new jets. Were your jets hexed or rounded with a flat head ?

[@iRidetas]

Dont remember mate, was a while ago and a few projects ago. It will be in the video

[@jamesbrooks6281]

Looking good mate, what did you do with your old tin wear. I just fitted 130s to my carbs makes a big difference

[@iRidetas]

Cheers! Its hanging up in the shed!

[@jamesbrooks6281]

@@iRidetas Cool, if you ever want to get ride of the rear guard let me know ..

[@DFPFTW]

Hey man I got a stack 2.5 inch off Amazon that looks like a cbr stack. I have little over a fingers width of space until top on inside tank. Is that enough space ? Or should I cut the stacks down a inch & I’ll be running 120 mains. About to install right now what should I look for in the tune for issues. Thanks man

[@iRidetas]

Mate I would be cutting a stack!!!

[@DFPFTW]

@@iRidetas hey buddy so I ended up cutting it in half, sanded down, looking great. Currently have 22.5 lows 120mains. Runs fine but Does not have a deep fuel rich sound. Ordered 25 lows and 130 mains about to install just like you. I do have VH short shots exhaust and I’m going to remove baffles. I’ll keep you posted

[@MrTrenooo]

@@DFPFTW what was the verdict?

[@chrisssergio]

Hey! Where exactly did you get your jets and pilots?

[@iRidetas]

mate its the title of the video and mentioned 3 times in the description... Mikunioz.com

[@ThatBikerDad]

It does look and sound like you have lost some low and mid range torque in place of high rpm power

[@iRidetas]

Having ridden the bike constantly from stock to this point, i gota say nope i feels like it pulls harder through all gears than it did!

[@xBryson666x]

Hey mate what was the part number on the jets if you don’t mind

[@iRidetas]

Googles ya friend mate! I just bought them as 130 main 25 pilot

[@TheMarcosdeo]

How much did this upgrade cost? Im keen to try it

[@iRidetas]

Costs are stated in the videos mate!

[@huntersepanio415]

Could you drop the links to them? Bout to to this to my Vstar as well!

[@iRidetas]

All the info you will need is in the video and description mate