IS THE CHEAPEST BALER IN THE COUNTRY FINALLY BEYOND REPAIR?!

[@tonygrisedale3787]

7:36 tonne! Great videos all year guys. Keep up the great expansion of BCB, your get there

[@martincunnington2154]

Great video, james john. I'm glad the gloves worked well for you, and the biscuits and cake went down well. Thanks for the shout-out ,the weight of the wiring I. going for 7.8 ton have a great week boys and zoe 👍

[@P4ULC71]

i really hope you taped up the exposed wires near the bed end of the truck after putting all that protective casing on them .)

[@almaxx9680]

It's only 3 ton keeping that yard operational 💪👍

[@thomasharikantra9893]

Hes worth 3 ton in gold

[@TheresOnlyOneKeebs]

3 Ton the man the myth the legend

[@Secdagmo25]

@@almaxx9680 you meen Chris.i understand .

[@davidhughes1634]

Well done 3Ton & Chris for fixing everything as normal,hopefully the new baler wks well,i say 9.2 ton.

[@davidlipski863]

Nathan and Chris are just as important to the business as John and James you don't realise how you struck gold with these lads.Your whole crew are a credit to your yard, i hope Johns wallet gave them a bonus this year. 7.8 ton wire

[@leefair9598]

@@davidlipski863 Chris is weak he has left before

[@peterelliott2882]

happy new year guys great vid again nice seeing 3 tonne on top of repairs ,big shout out too peeps for sending you prezzies shows your appreciated lets keep the yard on a roll lets see where iot goes in new year all the best guys and gals heeeeee

[@neilmccartney6573]

I met a few of the boys a couple years ago on a visit to blighty ,, just as they are on KZbin , top lads and a great team ,, and yeah 3 ton has got a bit grayer but that’s just normal when you are heading to fifty !, But I’ll tell you what and not in a gay way he’s got amazing wolf grey eyes ,,, happy new year to all you lot , the channel just get better and better ,, Neil from France .

[@ciderant]

6.79 tonne. I hope you manage to expand the way you want too next year👍

[@Secdagmo25]

Chris is the man .

[@shaun30-3-mg9zs]

Hi John + James, Nathan has done a good job welding the plate on the baler and that is genius idea to bend the metal, just put a Mercedes C class estate on it what else would you use. The weight of the scrap wire I think 7.87 tonne, the Sierra is of to Wrexham to get done, Wrexham is my home I might know the place I might go have a look, let me know and I'll keep you up to date on it. 2024 has been a great year of videos from your selves and may it continue in to the new year. Hope you all had a good Christmas and all the best for 2025, catch you all soon, take care BCB👍

[@86karl]

Great job as always 7.6tone in the wire bin , hopefully last time fixing the baler with the new one comming hope you had a good Xmas , hope Zoe's was a good one ❤

[@tractor453]

7.8tones of loom let me have one of them hats letsgooo how you doing boys hope your all okay 🎉

[@Neilcapri]

All the best for the new year .

[@lpalmer2606]

7.96 for the loom, ive really enjoyed watching your business grow good luck for 2025

[@M.R.C.]

7325kg for the loom. Great video, have a great new year.

[@Phuc_Yhou]

5.855 ton for the looms 👊

[@bubbadog9145]

morning crew hello im bubbadog, a massive shout out to 3 ton, that was a bloody good repair job on the baler especially how buckled it was. and obviously to my mate chris as well always good on the repairs and camera explaining whats going on. 5.75t on the wire.. thanks for my shout out at the end of the video lol... was hoping to see footage of the gifts i sent, maybe see them on Wednesdays vid..

[@BCB]

Yes we recorded opening the pressure don’t worry 😁 we are pretty ahead with videos we had to edit loads for the Christmas period etc so I would say be a week from now you see it !! Thanks again

[@NoelClince]

Great job 3ton ...fixing tat 👍👍👍.credit wer is due that was outa shape in a bad way .

[@davidirelande]

7.48 tonne in skip... good video boys hope you all had a good Christmas and all the best for the new year..watched the first video the other day... couldn't work out the giggling like a girl I thought Zoe was hiding then realised it was john.... haha... hope they've dropped now pal...😂

[@Bellamyatmidnight]

Enjoy the rest of Christmas and havea great new year all. Weight I think is 7.15 tonnes

[@gerryduffy6700]

7.85 tons ☺️🇬🇧👍. Love the videos guys

[@everestyeti]

Got to be about 8 ton in that skip, re the ram cover if you need a new one you could always speak to Ollie over at Snowball Engineering, would be a good co opt. Am going to have to get me some of those heated gloves. 👍

[@lemmy9996]

Definitely something that Ollie could help with. And his welding is immeasurably better than Steve Wonders 🤣

[@colinhodgkiss8467]

8.5 ton . Happy new year to you all.

[@johntray1462]

what a bright world you make this

[@djlerno7457]

did yes ever think about getting a combi lift i think one would benefit for yet. best wishes for 2025 keep it up

[@RichCroote]

7.234 keep up the good work lads an happy new year…

[@Toddy_68]

Another great video keep it up lads all the best for 2025 looking forward to your next chapter and watching your business grow even more well done..

[@johnberry2498]

4.4 tons Keep up the great work 🦊🦊❤️

[@SpeedyB79]

7754kg for the loom, hope you all had a great Christmas guys

[@williamholt-oj3hr]

7.8 ton keep ur the great work lads

[@jeffwass8268]

8.39 Ton Happy New Year Guys & Girl

[@alanreeves459]

Another great video 👍 We know James and Jon manage the yard well but thank goodness 3ton and Chris keep it running 😂😂

[@philglover2973]

Awesome video thanks lads six ,3 ton's 😊

[@mickwilson6852]

Great video, james john and happy new year guys💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯

[@andrewlockett4915]

9.4 ton wishing you all a great new year and a wonderful year

[@paddyici6629]

for the loom, ya can normally fit 2-2.5 ton in a 8 yarder so 3/4 of a 40 yarder should be about 9220kg

[@andywalters7300]

At 13m15 seconds 3 tonne takes good off. I always thought he had that nickname. For only quarter filling a bin now I stand corrected….. 3000shades of grey hair

[@waynehammerton5698]

Well done Nathan on getting the baler block sorted and another superb video once again team

[@leefair9598]

@@waynehammerton5698 bummers

[@mikerom9958]

7.375 ton... Happy new year to you all at Baxenden.

[@johnhaydon4055]

7Great vid as always, blimey big plans for 2025 with John talking about maybe getting rid of some buildings. I always thought the layout of the yard is tricky for deliveries and collections, can't be easy reversing those artics around so much. How about posting up the footprint plan of the yard and the buildings you are definitely keeping and inviting the viewers for suggestions for a new more efficient layout?? Always worth bouncing ideas around before getting stuck in IMHO . Great team and work as always, if I were thirty years younger I'd be bashing on your door asking for a job. ATB from J and H Builders PS 6.76 tonnes!

[@OzaniAntonia]

Thanks for the analysis! A bit off-topic, but I wanted to ask: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?

[@markspreadbury104]

Hope you all had a well deserved great Christmas. Loom 7.65 tonne. Thanks for the laughs here's to a prosperous new year.👍

[@itsgrimupnorth.6651]

7.1 for the loom bin guys and happy new year to all.

[@MartinBall-v6y]

Great video guys Thank you for all the videos this year guys and Happy New Year to you all. Three ton needs a pay rise for fixing the baler block he's saved you shed loads of cash, I bet Baz welder fabber was sat at home crying laughing watching the welding on the block 🤣🤣🤣 Your editor made a bit of a boo boo with this video you guys were talking about going to look at the new baler and you went and looked at it on the video before this one whoops. pluggy loom weight 6.1 ton. Catch you on the next one guys.

[@andywalters7300]

Great video

[@laurencerussell3947]

Hi guys 7.2 tonof wiring in skip, hope that’s correct.enjoyed the video. Regards👍

[@TheTorkerman]

I like when Chris is running the show, he explains things well without all the quirky ‘Jamesisms’ and prompting people to say stuff. #TeamChris, mate, BCB are so lucky to have gotten you back my man!

[@TheresOnlyOneKeebs]

You trying to say James is shit lad 🤣🤣🤣🤣

[@TheresOnlyOneKeebs]

Are you trying to say James is a Messer lad ? 🤣🤣🤣🤣

[@glynluff2595]

Your pipe cable support has substantial weight bearing down from top. If you can give initial support you will extend the life of the support system. These,are used in industry and have similar weight problems.

[@scotty6346]

I love this Channel, Happy new year Fella's and Fellettes at BCB from me in North devon 👍

[@georgepaterson4825]

Big shout out for 3ton and Chris looking forward to seeing the next one 👍

[@leefair9598]

@@georgepaterson4825 Zoe the laughing donkey

[@TheresOnlyOneKeebs]

@@leefair9598oi leave my future wife alone ya messer

[@MichaelPitman-n6o]

The weight in the in the lorry is 7 out of 10

[@Mark...]

7.75 ton 👍

[@joestiff3689]

8460 on the bin of wire great video as usual guys

[@keithbrueton]

Merry christmas to you all 7.7 in the bin

[@landroverlandyman]

When you found Chris and 3 ton your prayers were answered. Could you not bring John Astley in to weld the baler 😂and give welder fabber a good laugh at Christmas time.

[@tomwinter465]

4 ton of loom 👌

[@allanmcintosh8455]

7.128 kg in the skip good plans for next year look forward to following the progress

[@leefair9598]

@@allanmcintosh8455 sure you are bummer

[@jimginn7163]

7.35 in skip great news on new baler and happy new year to all at Baxenden 😎

[@leefair9598]

@@jimginn7163 bummer

[@phet1969]

8.88 tonne in skip..HNY to you all

[@NatNewstead-uk2nm]

Hello from Australia.. with regards to the baler repair.. top notch job that (remember: 'grinder & paint makes the welder you ain't' 😉).. I love the videos.. Happy New Year to the crew at BCB 👍..

[@ryanphillips1388]

Nice welding job

[@davidfoster7346]

All the best for new year, how was the whisk for the crappucino 7.97

[@SardarKhan-g2w]

It’s about 6.5 you should get the next door land. It will make you more easy for the business.

[@jonbird8303]

7.3 ton in the bin

[@bobwilkinson4377]

8.55 for the looms

[@CurtainFlapper]

It's not grey hair Nathan, it's go faster stripes

[@gasrite.]

I’m going 7.72 tonnes for the loom scrap 👍🏼 Chris

[@matthewc.419]

@15.05 .....still in shock " no welding screens up " AND , lad " never ever ever ever chip SLAG , without eye protection!!!!!!!! Ever 🙈

[@robertpower6695]

Thanks for all the videos, Happy New Year all. Plugggy loooom 9.165kg

[@reubenleveridge5175]

6,75 pluggy loam

[@lawrenceedwards7344]

Great video again boys good luck for the new year

[@leefair9598]

@@lawrenceedwards7344 love you bummers

[@stuartturley6002]

Guys! You really need to get a MIG Welder, so much better than Arc, just sayin 😅

[@SamanthaGlover-oy5st]

Lad um 9 and I do scrap

[@carlwarren1219]

Wire 7.5

[@davec1704]

Happy New Year Guys . Plugey loom 7.65 t

[@ARCHSTANTON61]

GREAT VIDEO LADS, KEEP UP THE GOOD WORK...

[@leefair9598]

@@ARCHSTANTON61 I fancy James

[@Billzer-in9dj]

i`d say around 7275kg

[@garysides636]

*Good afternoon Baxenden team* That baler had made more comebacks than *Elvis* and always comes better and stronger. However when one of the most important parts of the yard needs constant TLC and Chris's magic touch im glad you're trying to source another ... *Is the idea to have the old one available (as a standby) to cover servicing / down time of the newer one or is there not enough room* ? Hope you've all had a great xmas break *Gary Sulek* 🙏

[@CurtainFlapper]

7.3 tonnes wiring loom

[@briansweeney2291]

Looking like 6.85 ton

[@MickStorey-sb3eu]

Love the videos Happy New year

[@johngell4842]

Sunday morning treat that video Top job fixing the baler boys well done Maybe 8356 kg on loom ?

[@davidneil1452]

7.140 loom weight

[@bertalexbytheway3419]

6.250kg in the loom bin I reckon

[@joenewman6939]

7 ton of wire loom in the bin 😊

[@markvandelft8092]

9.28 tonns 💪 Shoutout and double thumbss up to the humble hornet👍👍

[@Bigdave1963]

Happy New Year all, when’s new baler coming from DW Martin in Scotland as you have already shown the purchasing of the baler. 8.1 ton in skip 👍

[@chrishammond1241]

For a total guess 8.1t on pluggy loom. I mean if we was going into granular numbers I would say 8.16t But then again I don't know if tons actually goes to two decimal places. As far as I know a 40yd bin is supposed to be able to take 15t of material. Obviously depending on what it is copper being relatively heavy and would knock down the total weight he could carry legally

[@RichardPlaice]

Keep Good job James and John 😊

[@leefair9598]

@@RichardPlaice 🤮🤮🤮🤮 get a room

[@8rich8]

Tell the editor to mix the audio better either the normal voice volume is too low or the b roll music is wayyyyyyy too loud

[@guttis1690]

6.730 in the skip

[@Thermopylae2024]

BCB make's Sunday mornings great again 8.15 tonnes in scrap loom Heee 👍

[@bentaylor3786]

#TeamChris 🎉

[@neilwharton720]

You needed Barry from Welderfabber for this job 😂😂😂

[@andywalters7300]

8365kg cable

[@craig8992]

8 ton 756kg

[@markmatthews1569]

Crush side in with DUSON Good Thinking

[@mattludlow8991]

7.8 tonne is my guess . Love watching the videos. Keep up the good work

[@seanbatty5107]

6.85 tonne of pluggy loom

[@ROY-ps2ql]

hi boys 8.1 ton