Be REALLY careful with Limestone - ft PWSAS

pressurewashersalesandservice...
01386 860032
[e-mail]
🔐 Click JOIN to get access to our members only Private Discord, downloadable image packs, guides & one to one advice 👉🏼 / @smout_
📝 SMOUT's Quoting tool - smout.club/
⚠️ Here's where I buy all my chemicals and sealers 👇🏼
Training Course (Chemical application, cleaning & sealing) -
puresealservices.co.uk/produc...
Hypo -
puresealservices.co.uk/produc...
Surfactant -
puresealservices.co.uk/produc...
Biocide -
puresealservices.co.uk/produc...
Gutters, fascias & soffits, Cladding, Oil removal, Degreaser -
puresealservices.co.uk/produc...
Tarmac Restoration -
puresealservices.co.uk/produc...
Jointing Compound -
puresealservices.co.uk/produc...
Decking -
puresealservices.co.uk/produc...
Rust remover -
puresealservices.co.uk/produc...
Concrete & grout remover -
puresealservices.co.uk/concre...
Graffiti removal -
puresealservices.co.uk/produc...
Vehicle cleaning products -
puresealservices.co.uk/produc...
🛒 Find all my current equipment below 👇
Pressure washer - Honda GX630 30LPM 200BAR
Surface cleaner - Kiam 18” Steel
ST2600 Trigger - www.acpressurewashers.co.uk/p...
900mm lance - www.acpressurewashers.co.uk/p...
1200mm bent lance - pwsce.co.uk/product/spares-ac...
Panther Gutter Vac - guttervacuumsystems.co.uk/pro...
Gardiner WFP - gardinerpolesystems.co.uk/clx...
Gardiner Backpack - gardinerpolesystems.co.uk/gar...
Broom - www.diy.com/departments/magnu...
Dustpan - www.diy.com/departments/magnu...
Sacks - www.screwfix.com/p/site-heavy...
Water tank - www.tanks-direct.co.uk/250-li...
Ball valve - www.amazon.co.uk/Tool-Daily-P...
Tank Fill valve - www.amazon.co.uk/dp/B09X2VGVR...
Low pressure hose 3/4" (19mm) - www.toolstation.com/reinforce...
Rinse nozzle - / 1752975708490054
Turbo nozzle - pwsce.co.uk/product/spares-ac...
High pressure hose: pwsce.co.uk/product/alpha-equ...

[@ched999uk]

For fixed PW in van you can get through the floor rollers for the hose but you still have to route the exhaust out somehow (maybe extra long flexihose and route out of through floor rollers after pw hose is reeled out and protected from exhaust temp). PW looks very good, with gear driven pump and decent fittings.

[@squeakycleandave1]

loverly job 👍

[@JCWExteriorCleaning]

Pls🙏 do an updated bin build your new one looks so cool and Im going to be building my own soon🥹

[@traceyrogers5125]

Great vidio... Thanks

[@SMOUT_]

Thanks for watching!

[@traceyrogers5125]

Yes... it is very cool

[@Mantra1988]

Why Do you usw a buffer tank for that? The tap with 17 liters is enough. Whats the reason?

[@SMOUT_]

You're right, it would have been enough, I should have tested it before setting up really

[@mightyboosh1982]

Is there anyway to test the customers tap pressure? Thanks

[@firetv5030]

Another informative video, just wondering, did you mean to put a different honda model as your recommendation here. Its the Honda GX630 30LPM 200BAR, and you have a 390?. Anyhoo , great work..cheers.

[@SMOUT_]

Sorry just updated the description with supplier links

[@chefsorrell9326]

Silly question but have u added blue, some the vans including mine comes up with a warning like that rather then a refill light, normally just adding blue can fix this

[@darrinperkins2110]

Great video, I need some guidance, I have a 20 inch disc , triple spray , machine runs on 4000psi and flow is 15 litres a min what size tips do I need to use ??

[@Phill1923]

Hi mate, good content, quick question if your water has 17l per m could you have just gone directly to your machine or was you just filling the water bin up to show off their products, great little water bin by the way I will look to get one, thanks

[@Lighthouse_Rides]

What if the customer puts washing on or dishwasher would it not drop?

[@Reign1]

Hi mate did you keep the revs at full doing this and lower the unloader? Just wondering how I would lower the pressure

[@SMOUT_]

Revs were at about 50%, you can adjust pressure with the unloader, and flow with the revs. It's trial and error, have a play around with both while holding the trigger

[@PromptPeakServices]

Considered a insta 360 go 3 at all?? For clip to shirt or cap freeing hands to film🤷🏼‍♂️🤷🏼‍♂️🤔🤔🤔👍🏼👍🏼

[@newnsy19]

Hi mate lv you videos I started out a few years ago with just a Amazon petrol washer I got a few jobs under my belt but then went bk to full time employment I’m now looking at buying a new washer from equip2clean just a couple of questions (for now) What do you think of there business start up bundles and what kind of price sqm do you charge in Leeds based Thanks Craig

[@gavynpope6190]

Nice machine mate , I’ve got a 21 lpm at 200 bar , my last machine was 250 bar 15lpm and I don’t really notice much difference between the two in all honesty

[@conradhaigh2500]

It’s funny not seeing you in a small van, at least with this van you won’t flood the footwells 😂😂😂😂

[@Mantra1988]

Which telescopic lance Do you recommend for roof cleaning? Btw great Videos.

[@SMOUT_]

Thanks, I like my Pro 35 power pole from GVS

[@micheal877H]

U need a ramp for that washer . U will do ur back in lifting it like that !!

[@SMOUT_]

I know 🙈

[@lesdodds6491]

Are you using a turbo nozzle on the roof?

[@gavynpope6190]

Refuse to clean limestone for ts a nightmare

[@traceyrogers5125]

Good old ollie

[@bazrat69]

Oioiiii lad

[@PromptPeakServices]

Like that 80L bin… soz, 120L

[@mattmartin4244]

More adverts than actual content

[@SMOUT_]

Go watch someone else if you don't like it, sorry that I like making money 💰

[@monkeyonthebranch]

It is content as well though mate, these videos are still very informative

[@mattmartin4244]

Fair enough. Most other pressure washing you tubers don't hammer the ads as much . They probably put more videos out so don't need to put as many adverts on each video. I'm not a rude person so nothing personal but it's defo off putting. Constructive criticism shouldn't cause you to show your true colours .

[@SMOUT_]

I don't compare myself to others, I'm doing my own thing here, you either dig it or you don't 🤷‍♂️ thanks for watching though

[@tr4kerz24]

@@mattmartin4244I think this video was great, it was a bit of both. Yes it was advertising a few product but Jake helps a lot of newcomers so it makes sense for him to show what kits needed. One video like this every now and then ain’t hurting no one. 😊

[@YuriPeriotto]

I thought it was recommended to always run the engine at 100%. Is this false?