Be sure to remember this trick! How to securely fasten a screw in aerated concrete

Be sure to remember this trick! How to securely fasten a screw in aerated concrete. Craftsman tips and hacks that really work
#shorts #diy #tips #tricks #howto #construction #skills #anchor

[@rodnyg7952]

the bracket is still loose & moves around, especially if you put weight on it. Just get some concrete screw anchors, and stop wasting everyone's time

[@fernyisable5]

Even a tapcon or mushroom head will do the job

[@rodnyg7952]

@@fernyisable5 a tapcon is a concrete screw anchor

[@luisonl1563]

@@rodnyg7952 xd xd

[@KevinFallows]

They think everyone is a dickhead 😂

[@deekayunited3445]

I thought he said tampon. I need new glasses.

[@HouseOfHam]

And with just a little more force, it comes out just as easy as the first two.

[@Денис-г8х8б]

🤣🤣🤣🤣🤣🤣

[@blacknight7280]

Agree with you!

[@ronaldopassos4271]

Pensei exatamente a msm coisa. Ideia bem idiota essa rsrsrs

[@zequiarce7413]

Entonces que hago

[@BajolalaskaXta]

Itu lucu

[@АлмасТусупбеков-ф3и]

Я знаю только два вида самой надёжной анкеровки. 1) Специальный крученный винтовой пластиковый дюбел GB преднозначенный для газоблока 2) Инъекционная химическая анкеровка, считается самым универсальным видом так как применяется практический в любой базовый материал. Имеет простой способ применения. Сверлится отверстие, далее расширяете отверстие внутри газоблока, заливаете химию. Далее фиксируете на химии нужный крепеж методом вращения. Данный способ анкеровки считается самым надёжным для газоблока.

[@germoshlem6744]

1 вариант говно

[@rorogos25]

Деревяшку вбиваешь в виде чопика и вкручиваешь

[@shazmodeus2795]

just for general knowledge, your local hardware store will have concrete / cement screws designed specifically for that type of material.

[@MrYam517]

its itung wall. have specific dibel

[@samgarcia6268]

Bra I don’t think some of these countries have a hardware store like we do in the USA these are probably 3 world countries where they make like a dollar or two per week so yeah for us is just a few dollars but for some a few dollars is a months worth of their salary

[@Sevenfold120]

@@samgarcia6268 What do you mean "some of these countries?" I live in Europe, we have large hardwood store chains across the EU.

[@getthere3229]

Just use the correct size bit for the plastic wall plug and thats it.

[@fidelgarcia5683]

And a thicker screw

[@Егор-б8й7т]

Это видео называется когда ты не хочешь купить специальное крепление для пористых материалов!!

[@ЛигаСправедливости-л2х]

Хм,не знал, например?

[@playz10n]

@@ЛигаСправедливости-л2х например винтовой дюбель для газоблока.

[@xeqyzable]

Металлические дюбеля для газобетона

[@ИванСлесарев-й8я]

Ну или хотя бы саморез по ДЕРЕВУ. Только самое главное не перетянуть.

[@xeqyzable]

@@ИванСлесарев-й8я ну не знаю... Саморез по дереву это самый самый крайний случай, и то без особой надежды на долгосрочное использование.

[@dtrialtorres354]

In the second case, the one with the plastic anchor, it would be better if you set the drill to turn to the right so that it screws in properly. You sped up the video so it wouldn’t be noticeable, but you were actually using it in reverse. That’s why the anchor isn’t expanding inside the wall.

[@davidturmo2020]

chat gpt

[@nimz1982]

100%

[@atilaflam5805]

Sharp eye 😊 salute

[@joeweatlu5169]

Most of these shorts seem to be shown flipped. That's why it looks like the drill is going in reverse. Just look at any other short where there is a drill or screwdriver shown. I don't know why it happens, but it does.

[@gregm2557]

Drill isn’t in reverse it’s to do with shutter speed of the camera that makes it look like it is. Google shutter speed video illusions. Theres a good one of slicer that looks like it’s spinning backwards but cuts a courgette and one of a helicopter flying and the rotors aren’t moving. It’s because the shutter speed matches the speed of the rotors.

[@ahbay-jy3ty]

Plastic plugs always ok so long as you use right size of holes & screws.

[@Blastfighters]

Nope, it dosent work in "aerated" concrete.

[@НиколайПрожерин-й1щ]

Строить надо из дерева кирпича а это говно пройден этап

[@ahbay-jy3ty]

@@Blastfighters I have been using it for years. Since aerated concrete is weaker, you can use larger diameter and longer plastic plugs and even more no. of screws depending on loadings.

[@aquatrax123]

Tapcons are the correct screws for this

[@КостедБурдед]

На термосопли конечно надежней чем на анкер

[@r.martin3494]

Thermal snot!? Where are you from?

[@Ebashu.hohlov]

​@@r.martin3494 russia😂

[@TheARLEK1N]

@@r.martin3494 "Thermosnot" (a play on "thermoglue") - here, it's used to sarcastically suggest that this method is about as effective as using snot as glue.

[@БелыйКвадрат-д3ш]

. . . канал зарегистрирован во франции. . . - самое популярное крепление - - (лягушачьи лапки) держат в секрете. . .

[@СемаКиров]

Ну ну! В газоблоке вообще ничего не держится😢

[@steveborgman9995]

Love the fact that you can see the screw moving at the end.

[@soberysamnsk]

Обязательно запомните этот трюк, из чего не надо строить дома 😅

[@АльваресФиллиник1]

Точно, салома и палки и то лучше

[@Kotopulta1993]

Саморез просто нужен по дереву, а не универсальный

[@Griff-gx4cr]

это газосиликат, для крепежа используется химический анкер

[@fantik3543]

Ты в психбольнице то давно был? Тут тебе дурь показывают даже при конечном результате, там дюбеля специальные в газобетон вбивают а не вот это вот!!!

[@ТалятАбибулаев-ж5к]

Мне кажется просто деревянный чопик был бы лучше😂

[@ЛешкинАлешкин-ы7р]

Есть интересная штука (сверло+шайба), которая делает внутри таких блоков отверстие, в виде обратного конуса. Потом туда шприцем вдавливается смесь из эпоксидной смолы и речного песка. В эту смесь помещается любой анкер. Вырвать конечно тоже можно, но уже с приличным куском стены.

[@alexk-dw7fw]

for this material normaly you use special nails in teh right size so the material around the hole gets more dense and holds the plastic plug

[@bongcrusha420]

even better trick. get the correct kind of screw

[@stephanebadol3842]

Wtf you are saying lmao you clearly have no idea to build anything

[@TheOscy1992]

@@stephanebadol3842he ain’t lying they do have tap cons for a reason 😂

[@K-rypto]

@@stephanebadol3842 Stephanie ask your husband... he knows better

[@Tramb21]

Et arrête KZbin, c'est trop cruel pour toi...

[@-.-MALPA]

Tak. Kołek nie rozprężył sie!!!

[@rusianalf]

Tapcons are a thing. They’re the blue color screws made for brick drilling.

[@andrewolson6731]

100%. Dumbest video ever

[@Tranzitorkg]

Actually, there are special anchors for aerated concrete, not like the ones in the video in the second version, but slightly wider and screw-shaped, many kitchen units have been hanging on them for more than 2 years in my experience of installation...

[@movavi3437]

Мен асхана гарнитурасын көтерiп тура алмайды газобетон деп ойлап едим.

[@КаныбекАлдакимов]

Ошондой бар экенда жакшы м

[@АнатолийАлександрович-ж9щ]

Сам гипсоблок слабый, туда на всю длину и система,, якорь,,

[@tommylee85]

I actually use "normal" screws pr plug, and it works just fine.

[@ScottA2345]

I would use the anchor slathered with a liquid bonding agent like Liquid Nails or something similar. better yet, the block looks hallow - then an anchor that grabs and tightens from the back.

[@Simple_Creative]

That's a good idea 👍🤝

[@chocolatechipcoochie3677]

Maybe if you bought anchors intended for block and concrete instead of a drywall anchor it would help you.

[@romistankist2407]

Саморезы по дереву всегда хорошо держат в газобетоне

[@Михаил-ф9ф]

В газобетонных блоках нихрена не держится, только химический анкер.

[@drmorphine4344]

По дереву нормально согласен. + можно еще их протереть воском

[@philippenoyeau5203]

absolutely

[@АлександрНезнамов-ь8и]

Капролоновые дюбель, держится норм и стоит копейки.

[@ЧеловекПароход-я2о]

@@Михаил-ф9ф ну ну

[@derrickknight4985]

Nah…. It was still loose. You need an anchor bolt.

[@RudaBesny]

Or simply buy an aerted concrete anchor

[@АндрейАльтов]

A brilliant idea for attaching a bracket to these hot snots. It will be as reliable as in the previous versions. There are special dowels and chemical anchors for this. In extreme cases, you can fill the hole with liquid glue and hammer in a regular dowel.😊

[@RichardsAutoAc]

What is he using in the block? Glue stick?

[@Evgen333]

Слабо дёргал в последнем варианте

[@parkermuews6033]

Ага как в видео, где чувак рекламирует розы своего магазина.

[@БакытжанЕлекеев]

Это точно показуха

[@doktorwho75]

боялся что опять видео не получится

[@dednsayd]

​@@parkermuews6033😂

[@vania-g3t]

When the wall is no good, there's no point in trying.

[@muratpolat3761]

Yutong dubeli kullanabilir

[@johnbarone8948]

A Power's lok-bolt fastener would work great on that material.

[@gtopnotch6012]

Love how he didnt try as hard on the last one like he did the first two which makes it seem like it works

[@DadiszFekete]

Well he just put a ✅ never said ut works 😂.

[@TheGSI3]

Arts and crafts guy thinks he knows more than a real tradesman!!!😂 The drill looks like he bought it at 7-eleven!!

[@ernestogarcia7947]

That’s why anchor bolts are made!!

[@РусланОрехов-й3з]

Всё равно не держит, люди давно используют химический анкер

[@grogan2]

Не нужно там хим анкер никакой, это все равно что банкноты в дырку совать. Просто делается высверловка на конус (на входе 1см, в глубине 3..4см), и туда любой цементный раствор с песком затолкать, и сразу в него шпильку с гайкой, пока не застыл (от 3мм диаметра до 10мм, в зависимости от планируемой нагрузки). До 100кг выдержит. В статике и до 300кг, но там уже блок развалится.

[@VaclavMasny]

just use the correct dowel.. nothing else :/

[@leongallagher6792]

Yea 😂

[@sohelnadaf3191]

But he slept in infinity war 😂😂😂

[@hugog271]

The issue isn't the screw. It's the block made of sand. They must have substandard construction codes there

[@СергейКнязев-ъ4з]

Тссс,никому не рассказывай,но можно в пластиковый дюбель жидкие гвозди зарядить ,а потом саморез вкрутить с твоей херовиной и через сутки вообще хорошо держаться будет)

[@terrranova]

а можно просто шуруп подлиннее и с резьбой по дереву. Главное не перекрутить. А так, херня все это - чопики, жидкие гвозди и пр.

[@Эдельс]

Чтобы на запоминать ерунду, нужно не строить из ерунды.

[@whynxmvd]

Пеноблоки и прочие материалы используют не только для стройки. В квартире перегородки из них делают. Беток в квартире лить? Или из чего строить? Гипсокартон? Такая же ерунда. Дерево? Бред

[@mikeyensen3688]

​@@whynxmvdничего против газоблока, но есть ещё обычные кирпичи, кроме тех материалов, что упомянули

[@r.martin3494]

That's nonsense!

[@muratpolat3761]

Yutong dubeli kullanabilir

[@patriziopetacco2882]

Esistono i tasselli per gas beton...da anni😂😂😂😂😂😂😂😂😂

[@briantolley854]

Theres these cool things called tapcons, they're blue....and the red devils come in a box with red writing on them

[@Chris._P._Bacon]

Funny, the drill stopped when the screw was all the way in.......suddenly there is room to wiggle.

[@jo_se]

No hay nada mejor que un buen tarugo de Madera dura

[@hronomasterlogos3267]

Не в этом случае

[@r.martin3494]

My ex girlfriend said the same thing. She was a big fan of D.I.Y.

[@xTolichx]

Саморез по дереву 100. Закрутить наискось.

[@terrranova]

совершенно верно. А то начинают придумывать всякое, только время и деньги терять.

[@SousaLourenzo]

Quando a parede não presta, não adianta ficar tentando.

[@HanyMoh2017yt]

This is the content that only benefits its owner

[@Sevenfold120]

What are you drilling into? Sand? The first plug was clearly the wrong one to use.

[@luiscastillo2832]

Has anyone noticed how soft that block is , you see the bracket dig into it as he rotates it , anchors don’t cont out that easy in real cinder blocks ,

[@JuamsWeeb]

It's clear that you didn't use any force at the end.

[@TheNuckinFoob]

1) That'll last about 3 seconds longer than the first two. 2) Get a concrete anchor, genius.

[@m0dezer0]

what if it gets hot enough one day? won't it loosen up?

[@focQO0oIll000o0]

The stupidest idea is to stop thinking.

[@sambro1737]

Wow amazing work! Can you put my tv up so I can watch that film 🍿 the falling down 2

[@artfx9]

Use metal anchor inserts you hammer in. No other option.

[@Scorpion-vengeance]

Yes, and it still wobbles and will come out easily The only reliable way to fix something in foam block, aerated concrete, is a chemical anchor. Yes, it is expensive, but very reliable

[@RusHersWolF928]

Put wood incide the concrete for best grip

[@JR-o7d]

I will remember this next time I want to install a shelf bracket upside down.

[@HussainAlrashid]

Is that concrete or flour?

[@matthewbenton5048]

Are those bricks made out of sandstone? That bracket ate right into it

[@chuckdapug]

Maybe it will work better if you wrap The screw with wire 😂

[@Simple_Creative]

That's a good idea 🤔🤝👍

[@zzzubmno2755]

What is that brick made of, chalk?

[@ыыы-ф1ю]

the dowel turns out to be very expensive. There are spirals for aerated concrete

[@Rikyzgaming]

So one glue stick in every hole, that's gonna be expensive asf.😅

[@atanasboykov1117]

That's complete nonsense - just don't over-tighten the screw. In aerated concrete, a wood screw goes in directly and holds firm, no problem.

[@brm7469]

How the hell did he put a sheet metal screw straight into concrete

[@albertosa5132]

Where do you get the plastic

[@urbanturbine]

Tapcons were invented in 1976. People before 1976:

[@lipevolcom2]

Just use the nylon bushing and get a longer screw bro

[@darrinpatterson2764]

If you you must really fix to these blocks ( thermalite ) the best solid method i found was to drill a 5mm hole and use a torx frame fixing. inject polyurathane wood glue and then puty the fixing in by hand and let it go off. makes for a solid fixing as those blocks are a nighmare

[@jeramiahhinkle336]

A single Tapcom screw costs about the same as that anchor and sheet metal screw and you should screw those in by hand, at least the last 1/4 inch. Dont over tighten them with your drill. Follow this video, and you will eventually head back to the hw store for help. Ignore everything in this video, including that drilling in reverse!!!! 😆

[@ElDell]

2 pieces of cable tie work even better...

[@MattH-l3i]

It's called a masonry anchor. They're cheap and they work better than whatever this guy was doing.

[@club23world]

Surely the wall plug is to big for the screw as it hasnt expanded at all.

[@thumbi3104]

Why is the bracket upside down?

[@elim5353]

Put copper wire in there. Ground tail or some soild copper conducter holds everytime

[@tabacodepipa7344]

I don't see the point. Screws are used to be unscrewd some day, sooner or later.

[@ImJarenWard]

SERIOUSLY no one realized he was screwing it backwards?

[@charlespaluha1247]

What are you screwing into styrofoam😂😂😂

[@sunlightie]

Moral - check the brick before you 😂😂

[@user-dr8ej9ii1h]

Потянул бы чуть посильнее, всё и вывалился.

[@Deendayal2]

When you put working drill bit with wrong plastic holder size 😂😂😂😊

[@PhilEstevez]

On my way to my mothers house to fix a problem 😂

[@TheBraptist]

this is silly, use resin fixings for really soft stuff like breeze blocks, frame / concrete fixings for brick, harder concrete etc

[@mjpm2409]

Yeh, im definitely burning my fingers rather than using concrete rawl plugs next time I need to do this.

[@Sound_Spark]

literally after you started pulling on the last one it was already coming loose.

[@mertcanylmaz6005]

dont ever try something like this, its dangerous. these blocks are not for screws

[@puppytooth.v6502]

Hammer pin?

[@ikimoko17]

Fisher aac screw anchor

[@Scratch_DeezCutz94]

Why not just use tapcon screws or anchors

[@jonh_wick777]

For this there is a special fastener, a dowel in the blocks)

[@TUSK4America]

A tapcon or a wooden dowel would’ve been better. I’ve used a no. 2 pencil before and worked better than anything I just saw

[@covid1655]

Yeah or just use the right tools for the job. I swear this shot only impresses fast food and retail workers

[@РусланЧернолуцкий-в3ь]

the only way to secure anything in aerated concrete is with a chemical anchor. and you are doing the same thing as a dog does when it has nothing to do.

[@cincai677]

Mampuih laa nak kena bawak api plak hahahaha

[@Sanguine_Sno]

Or buy concrete anchors and your wife won’t be pissed you wasted an entire stick of hot glue. No way that glue will stay secure, all that dust is gonna make it loosen quickly, especially with weight on it

[@fajarwahidan9351]

The clay bricks are better.

[@AlbertvsMagnvs]

jamming a thin stake of wood should work

[@GJGAMERYT]

Yaha ek wicket milega ki do ???😅

[@RemoteTrooper]

Gorilla glue expands, I use it on anchors.

[@re.rafael]

If you use the appropriate anchor and screw, it will hold. An alternative to the plastic anchor would be the use of an anchor bolt (metalic), but this is generally done only when the load is high, which does not seem to be the case. Yet another video teaching nonsense that unsuspecting people will fall for

[@normford3721]

Just put a piece of stove wire in the hole then screw the screw in it won't move

[@NadXah]

Glue stick??