Check out this video to see how to pump ghost shrimp! kzbin.info/www/bejne/h5qaaYiXjNynp9E
@edwindaxton1753 жыл бұрын
I dont mean to be so offtopic but does anyone know a trick to get back into an Instagram account? I stupidly lost my password. I would appreciate any tips you can give me
@jerrykayson91983 жыл бұрын
@Edwin Daxton instablaster :)
@edwindaxton1753 жыл бұрын
@Jerry Kayson thanks so much for your reply. I got to the site thru google and I'm trying it out now. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@edwindaxton1753 жыл бұрын
@Jerry Kayson It worked and I actually got access to my account again. I'm so happy! Thank you so much, you saved my account :D
@jerrykayson91983 жыл бұрын
@Edwin Daxton happy to help xD
@jamespinckney730427 күн бұрын
Thumbs up for suggesting the washer. It’s just easier.
@jeffreymuscat4598Ай бұрын
my son and I build one this morning after watching your chip , thanks ☺️
@danthebeeman Жыл бұрын
I added a t at the top 2 inch pipe, 2 x 2 x 3/4 to have a handle to hold the 2 inch, really helps. Thanks for the rest of the info👍🇺🇸🙏
@Trophybearer6 ай бұрын
Best video I’ve seen on this build. Easiest with least amount of parts well done brother
@FloridaEastCoastSurfFishing4 жыл бұрын
Gulf Coast Fishing DIY! 🐟🎣👍😎 Nice easy to follow build!
@BeardedBrad924 жыл бұрын
Thank you!🤙
@williamcox31205 жыл бұрын
2 inch washer... excellent idea. Enjoyed the video, looking forward to more.
@BeardedBrad925 жыл бұрын
Thank you! I appreciate it!!
@FishingFoolsOutdoors5 жыл бұрын
that's awesome. great job on the tutorial. ingenuity. necessity is the mother of invention.
@BeardedBrad925 жыл бұрын
Fishing Fools thank you! I appreciate that!
@johnmarschalk19772 жыл бұрын
Pretty sure this is 2nd time I've watched this video. Must not have hit the LIKE button 1st time. :( Hint that I haven't tried yet. Saw a guy putting holes in 5 gallon buckets with spade bit. He ran drill in reverse. Seemed to go through plastic easier. Getting ready to make one of these. Let you know if reverse was easier. His didn't grab as hard
@kennethlaibson65062 жыл бұрын
Hey Brad , try using a Clear Pipe. For that, Exposed look. You see inside when you gather your Ghost Shrimp 🦐.
@hooked44 ай бұрын
clear pipe ust as cheap? 👀I dont see them in the stores
@marioreyes27013 жыл бұрын
A good subsitute for the plug is one of those small blue handball balls. You don't need to cut it. You just drill holes for the bolt and that's it.
@BeardedBrad923 жыл бұрын
That’s a good idea!
@rogerwhitcher8260Ай бұрын
Awesome video. Thank you🔥
@pathoffman65373 жыл бұрын
Nice demo on DIY pump....thanks
@BeardedBrad923 жыл бұрын
Thanks dude!
@jimlowe20153 ай бұрын
Brad thanks I have been talking to Julie and Brent about the shrimp and then found your pump vid just thanks for the info bro JLowe
@ComeOnRedsFishing4 жыл бұрын
This is very cool and simple. I'll be trying this out! Thanks so much!
@BeardedBrad924 жыл бұрын
Yes sir. Thanks for checking it out
@hooked44 ай бұрын
If youre like me & dont have power tools. measuring & cutting with a hot (stove) knife works too
@glennbrown34203 жыл бұрын
Thanks loads , I’ll be making one before I go to the beach again
@BeardedBrad923 жыл бұрын
Yes sir! Definitely a must have when going after big pompano!
@hooked44 ай бұрын
I know this was awhile ago but I just made one using your video. Everything looks great except the 2“ washer didn't work out for me. it's too loose inside the 2“ pipe tightening & loosening the wing does nothing on this model but I will go back to Lowe's get another test plug & try making it smaller like you did. This was an exceptional instructional vid. Super easy to follow
@Glory-Days-Fishing2 ай бұрын
1 1/8” hole saw is perfect for the hole on the 2” cap. Almost done with mine
@TheAssaultcraft4 жыл бұрын
Awesome...house quarantine going on ill make these this weekend
@BeardedBrad924 жыл бұрын
Awesome!! Super easy and worth every penny
@R0NE1002 жыл бұрын
Great video! I'm definitely making one when I get to Orange Beach
@BeardedBrad922 жыл бұрын
Awesome!
@brianrychetsky23772 жыл бұрын
Instead of a test plug you can also use a racquet ball. That’s what we used to use on the west coast
@brianrychetsky23772 жыл бұрын
I think you have to use a larger outer PVC if you use that…been a while…28 years to be exact
@SoundFishingTV2 жыл бұрын
Thanks, gonna try to make one
@EddieMathis2 жыл бұрын
Thanks, Brad I need one of these up here in NC. Saw you on the Bama Beach Bums channel, really enjoy both of yalls channels.
@kenson67255 жыл бұрын
Just finished mine, thanks for the vid.
@BeardedBrad925 жыл бұрын
Awesome! Glad it helped!
@gentryandjill Жыл бұрын
Thanks for the video. Great work bench!
@lidlnutz2 жыл бұрын
found ya through a FB vid. The one that has most views btw. And I dig your content. I am inland in MN (land of 10,000 lakes) So i am familiar with fishing. but ALL saltwater is new to me. I love seeing this stuff dude! If I were to race to an ocean, I wouldn't know to go east or west (North to the frozen one maybe?). I am as far from an ocean as ya get. So this stuff is very cool for me to see
@BeardedBrad922 жыл бұрын
Thanks!! Hope you get the chance to do some saltwater fishing soon!
@koaakahumblek2666 ай бұрын
Always wanted one so following your video I made it Mahalo
@ParkDari Жыл бұрын
Making one this weekend!!!
@tevaheimau97513 жыл бұрын
MERCI Bien nous avons des mantis aussi chez nous et la peche traditionnelle c'est un peu long, Bravo
@TeamTibbett4 жыл бұрын
Bloody good idea mate.
@BeardedBrad924 жыл бұрын
Thanks!
@danfish4life2495 ай бұрын
Making one of these. Makes me think of what wise men say....keep it simple stupid. Great video thanks.
@mullisoutdoors5 жыл бұрын
Great diy Video Brad!!
@BeardedBrad925 жыл бұрын
Mullis's Outside Again thanks dude! 🤙🤙
@wilsonflanders878 Жыл бұрын
Thanks for sharing, greatly appreciate it
@SaltyMcCroryFishing5 жыл бұрын
Great video.
@BeardedBrad925 жыл бұрын
Salty McCrory thanks man! You got a shout out coming in the next one! Stay tuned!!🤣🤣
@SaltyMcCroryFishing5 жыл бұрын
Let’s fish Saturday.
@davidstokes9253 жыл бұрын
When the small end of the spade bit starts coming through, turn the cap over to finish the hole!
@rider660r2 жыл бұрын
Or just do it right and use a hole saw and run it in reverse......HF has a hole saw kit for $18. There is a cheaper $13 kit but it goes from 1" to 1-1/4" as the $18 goes from 1" to 1-1/8" which would work better for 3/4" PVC where the cheaper kit would work better for 1" PVC.They also have brad point bit set for $6... If one can't afford those then one can't afford to fish... Also when gluing PVC one has to use the PVC cleaner or acetone (same but cheaper by volume) 1st then apply the glue.Just using glue and no cleaner will ensure the joint will come apart at some point,sometimes sooner than later. Also to reduce the size of the one side of the test cap just put your bolt through the cap,screw on your wingnut and chuck it into the drill you have to make the holes.Then just run it over sandpaper,concrete,asphalt,or anything of the like that is rough.This will make it near perfectly round.
@MaddogFishing5 жыл бұрын
Great diy video Brad🤙🏼
@BeardedBrad925 жыл бұрын
Maddog Fishing thanks man!
@scottphillips24203 жыл бұрын
I love your workbench where did U get it?
@angelcampano899011 ай бұрын
Thanks for sharing a great idea and a simple design that obviously works you're good dude
@PureLivingForOutdoors5 жыл бұрын
Thank you for making me one man! 😝
@BeardedBrad925 жыл бұрын
Come back to visit and we’ll get ya one!
@PureLivingForOutdoors5 жыл бұрын
Bearded Brad I come every year! Our friend owns that condo so it makes it hard to go anywhere else! Lol
@BeardedBrad925 жыл бұрын
Pure Living For Outdoors that’s awesome! Well see ya next year then!
@PureLivingForOutdoors5 жыл бұрын
Bearded Brad to be honest I’m hoping this fall 😂😂😂
@BeardedBrad925 жыл бұрын
Well be here! Bull red fishing is on fire in the fall!
@pompeyo73 жыл бұрын
Brilliant video thank you for sharing
@BeardedBrad923 жыл бұрын
Thanks for checking it out!🤙
@pompeyo73 жыл бұрын
@@BeardedBrad92 would this work if you replaced the plastic pipe with stainless steel, only asking as where i live we pump for lugworm.
@BeardedBrad923 жыл бұрын
I’m sure it would work just as good
@pompeyo73 жыл бұрын
Thanks Brad
@michaeleverton48823 жыл бұрын
@@pompeyo7, - Alvey Reels, Australia, make bait suction pumps with s.s. pipes. Alvey fishing reels etc are imported into USA, - maybe their s.s. pumps too. I have two of them. These pumps need a handle fitted in, just under the top cap! It makes it So Much Easier to pump with! 🦐 I am in SA. 🇿🇦
@dannyharageonesjr.2024 Жыл бұрын
Great Job great video
@davidfuentes7855 Жыл бұрын
Great job
@alexadamko6848 Жыл бұрын
Thank You! Nice and easy…
@ryanbray78125 ай бұрын
Namaste Batman!
@xRamZx4 жыл бұрын
Where's your PPE bruh? Lol great vid, came over from the fwb fishing page. Subbed!
@BeardedBrad924 жыл бұрын
Haha thanks dude!! I appreciate it!
@glennnilson4983 жыл бұрын
Thank you very much
@BeardedBrad923 жыл бұрын
You got it!
@Goooog237 Жыл бұрын
Thank you much 🙏
@andrewtruong959714 күн бұрын
@BeardedBrad92 Thanks for tutorial! Quick question, does the inner diameter of the washer matter?
@markthomasstopani8516 Жыл бұрын
Great video!! Now that you have two are you going to sell or give one away?
@jackriley774 ай бұрын
If. Only I had a drill
@chekfakarm2713 Жыл бұрын
Thanks
@wesleyhackney5 жыл бұрын
Looks simple to build but I have a dumb question what is a test plug and where do I get one. Are they in the same section as pvc parts in store or another section. Looks good though
@BeardedBrad925 жыл бұрын
They will be in the same plumbing section. They will be with the fittings. Sometimes it’s tough to find everything because there’s so many different sizes and whatnot, so you could always just show the guy the list and they could get everything pretty quick for you!
@ronaldcormier52584 жыл бұрын
Hey Brad, Great video!!! Do we get ghost shrimp on the east coast? Flagler or Ormond Beach? Orlando Ron
@BeardedBrad924 жыл бұрын
They’re over that way, best to go out at low tide
@blakewarren6585 жыл бұрын
Very nice
@BeardedBrad925 жыл бұрын
Thanks!
@michaeleverton48823 жыл бұрын
Put a handle just under the top cap!.... It makes pumping So Much Easier!.... 🙂
@BeardedBrad923 жыл бұрын
I’ve seen some like that. Definitely a good idea!
@michaeleverton48823 жыл бұрын
@@BeardedBrad92, - In SA, 🇿🇦, we have plastic bait suction pumps, that we also refer to as prawn pumps, with handles on. I have two Australian Alvey, steel pumps, are made with handles on. Alvey reels etc are imported into USA. They are much more advanced with handles on them! 🦐
@michaeleverton48823 жыл бұрын
Also, on all of my pumps, I put a level end, pipe end cap, onto my washer system, facing down! I made a hole close to the level end, to get split pin thru the metal rod, as threads on my pump's rod are worn down! Or put washer in place, turn nut onto rod! This hollow shape increases suction power!...🦐🦐🦐 On my plastic pumps, I file a slight curve edge, from outside of bottom of plastic pipe, and on the shaft edge, below washers, sloping inwards, this makes it a little easier to push pump into sand or mud! !🎣_🦐-🦐-🦐-🦐_🎣!
@kylekarwowski2642 Жыл бұрын
Great video! Thanks for sharing that know how. I have been going down to Dauphin Island for the last 4 years, I'll be down there 3/25 - 4/7 this year. Do you think it would be worth it for me to make one and carry in the surf cart on the west end? Are there ghost shrimp there? Any info would be much appreciated. I live in the UP on south shore of Lake superior, I drive down every year with a chest freezer wired up to battery bank in the truck. Love Alabama especially the coast.
@TallThingy5 жыл бұрын
great video but who has cheaper prices? Lowes or Home depot? Thanks!
@BeardedBrad925 жыл бұрын
I didn’t compare prices, but they’re going to be pretty much the same on most these items.
@TallThingy5 жыл бұрын
Bearded Brad Okay thank you!
@ClayManJay3 жыл бұрын
Any way I can reduce the intake smaller for tiny crevices? I’m using for gold panning
@BeardedBrad923 жыл бұрын
You can use smaller PVC. You just put a reducer on the end, that would probably still work
@tisallc27982 жыл бұрын
Where did you get the test plug from?
@BeardedBrad922 жыл бұрын
Lowe’s
@ralphpratt96712 жыл бұрын
Will that work on fiddler crab holes?
@hooks4nooks9 ай бұрын
I'm confused. You used a 1" drill to drill into the 2" cap to accept the 3/4" PVC? It's the 3/4" PVC actually 1"?
@DanielPattersonBeekeeping7 ай бұрын
The 3/4 is interior dimensions. Exterior is 1"
@itsonlystef79617 ай бұрын
Inflation its now 24$ 😂😂😂
@tommyluke64074 ай бұрын
Bidenomics !! TRUMP 24 !!
@BloxyGuyRBLX2 ай бұрын
@@tommyluke6407Corporate greed is more of the problem though
@KingJonXVII7 ай бұрын
My wing nut and bolt started spinning less than an eighth before seated proper. 😑
@richgreen9093 Жыл бұрын
Whats the washer for?
@dreamaera Жыл бұрын
You can bet those plastic shavings went straight into the ecosystem -_-
@Dsoginventor4 жыл бұрын
When I use my drill with the spade bit, should I start and stop the drill a hundred times like you did, or can I just start it once and drill the hole?
@BeardedBrad924 жыл бұрын
You have to start and stop 100 times to get it just right!
@MelLocklear3 жыл бұрын
Where did you get the test plug
@BeardedBrad923 жыл бұрын
I got everything from Lowe’s
@BOTzerker4 жыл бұрын
$20 lol; not through Amazon and certainly not in California.
@BeardedBrad924 жыл бұрын
At lowe’s in Alabama you can get all parts for under $20. This assumes you already have drill bits glue lying around. But just the parts in the pump all together are under $20
@BOTzerker4 жыл бұрын
@@BeardedBrad92 Ok consider throwing Alabama in the title. lol