Become a SOLIDWORKS Pro | Master the 'Leaf Pattern on Sphere' in Days | Ultimate CAD Mastery Guide

[@PASHKULI]

Figuring out the 6 to 5 polygonal split and both axis is the most difficult thing. It has existed for many centuries of course, and quite well presented in the classic ball in football (soccer): hexagons and pentagons. Thus can be done with large pentagons and small triangles as well, the patterns will be different. This is next level! Possibly the most complicated pattern.

[@EasyCADSolutions]

Thanks for your insights 👏

[@mazuk2281]

Spatial thinking is of the highest level.👍

[@EasyCADSolutions]

Thanks 🙏

[@junior.juniorrr]

I'm learning a lot from the videos and enjoying solidworks more and more for being able to reproduce the projects that are presented here. Thanks for sharing so much knowledge. A happy subscriber here from Brazil.

[@EasyCADSolutions]

Welcome 😇 Thanks for watching 🙏🏼

[@mukeshbadgal45]

I learn more features of solidwork by following your videos and these makes my mind to think creative CAD products in solidworks

[@EasyCADSolutions]

I am glad to hear this 🙏 Thanks for Watching Happy Modelling 😊

[@catkeys6911]

OK, finally got my earlier version (2015) to cooperate enough to finish this piece. My 2015 version had a couple of issues (it refused to delete & fill at 17:17, so I just used chamfer, and it looks ok). Anyway, the finished model looks great, so I'm a happy subscriber. :)

[@EasyCADSolutions]

Great 👌 I have used fillets then delete because it's easy and quick instead of 3 separate chamfers But i really like the way you do it Cheers Happy Modelling 😊

[@jeremydemarco8697]

Same here, it works on 2/3 but solidworks crashes

[@OnotoleWasser]

Beautiful exercise.

[@EasyCADSolutions]

Thanks for watching 🙏🏼

[@jeremydemarco8697]

i have years of solidworks usage and I still learnig features, I used to use Rhino to make this type of work but more fun on Solidworks Thanks !!!!!!

[@EasyCADSolutions]

Thanks for watching my tutorials Happy Modelling 😊

[@jeremydemarco8697]

@@EasyCADSolutions THANKS !!

[@jeremydemarco8697]

@@EasyCADSolutions just finished it, how this come to you ? Maths ? I'm a 3D designer for long time in jewelry, and I could not and still could not be able to realize such a design like this without a step by step tutorial !! Thanks again

[@ericsandro]

very good, show!!!

[@EasyCADSolutions]

Thanks 👍

[@Virus-yu6vu]

So cool design....you have no comparison over youtube ❤️❤️❤️ sir

[@EasyCADSolutions]

Thank you so much for watching my videos and supporting my channel Happy Modelling 😊

[@muhammadsaqib5420]

Nishant bhai app ki mehnat aik din zaroor rang lay gi . Flawless video bana nay ke liay kitni mehnat kerni padhti ho gi us ka andaza kam kernay waloon ko khoob hoga. Hamaisha ki trah app ki video se bohat kuch seekhnay ko milta hay. Keep sharing like this bhai. Apna khayal rakhiay ga. Allah hafiz 🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲 👌👌👌👌👌👌👌👌👌👌👌👌👌

[@EasyCADSolutions]

Bhaut Bhaut shukriya Saqib Bhai🙏🙏

[@AKAI2002]

while doing circular pattern, 20:50, I had space between each hexagonal pattern instance unlike yours what could've happened here, did it happen way at the beginning or do I have to toggle any settings in circular pattern?

[@EasyCADSolutions]

You need to make a new part from the beginning in a new part file with exact steps as shown in the video

[@AKAI2002]

@@EasyCADSolutions it's spaced as if I need the line at 2:16 to be longer to adjust the angle even though I put 100mm as you did, but I'll try it from the start since it's fun XD thanks btw :)

[@AlexAlex-go9hg]

Music is amazing, I was tired to listen the same classic music in every video. This music was great, the modeling is very advanced

[@EasyCADSolutions]

Thank You 🙏

[@leventgursen600]

Tebrik ederim. Harika ve eğitici bir video olmuş.

[@EasyCADSolutions]

İzlediğiniz için çok teşekkürler

[@js740419]

thanks for sharing

[@EasyCADSolutions]

Welcome 🤗 Thanks for watching 🙏🏼

[@skrety9883]

As always, great modeling!!

[@EasyCADSolutions]

Thanks 👍

Đỉnh quá ạ

[@EasyCADSolutions]

Tôi vui mừng khi biết rằng cảm ơn đã xem

[@edwilliams9914]

Come for the incredible SolidWorks tutorial -- stay for the ultra-chill music!

[@EasyCADSolutions]

Thanks 👍

[@kaferbur]

Hello, I am working on each exercise that you propose and I am working in detail to understand how each process is carried out, however, when you make the correction to eliminate the faces in the last coating, I did not understand why this happens. At what point is the possible mistake made (time 13:57) of creating some surface that later leads us to the failure of not being able to do the coating, I really appreciate your kind time and explanation.

[@EasyCADSolutions]

Here i use the delete face tool with the delete and fill option because sometimes the loft surface fails to create the surface If the problem occurs then try to make the surface loft without delete and fill command

[@walterhuang5075]

Oh, gosh. You are SICK!

[@EasyCADSolutions]

Thanks for watching 🙏🏼

[@MrRaminder79]

Excellent

[@EasyCADSolutions]

Thank you 🙏

[@apprendrelacao5080]

very good father

[@EasyCADSolutions]

Thank you so much for watching 🙏🏼

[@vlogthanhdieu699]

Thank you so much master !

[@EasyCADSolutions]

Welcome 😇 And, Thanks for watching 🙏🏼 Happy Modelling 😊

[@shansultan1995]

sir you’re the best😘😘😘

[@EasyCADSolutions]

Thank you 🙏

[@shansultan1995]

@@EasyCADSolutions omg your replay to me

[@kamolhakim3688]

Thanks a lot

[@EasyCADSolutions]

Welcome 😇

[@bakerhaydarahmad1905]

Were i can find the link, i didn't find it

[@EasyCADSolutions]

Link of what, Boing 747 or Model?

[@boringbike6140]

Hallo...great tutorial... please make carbon bicycle frame with N power surfacing..

[@EasyCADSolutions]

Sure, I will try to make it But right now I don't have N power Surfacing extension in my Solidworks Thanks for watching 🙏🏼 Happy Modelling 😊

[@de4824]

sir, I am not able to find the command of (OFFSET ON SURFACE) in Solidworks 2015. can you suggest me where to find it or any alternate method to do this command

[@EasyCADSolutions]

Sorry, but there is no such command in Solidworks 2015 because offset on surface command is introduced in SW 2017 or later versions But you can make three individual planes on the faces by selecting any 3points of the curved diamond faces, Then sketch on the plane and make offset sketch on that plane and then perform the surface trim and similarly do it on other two faces Hope it will help you Happy Modelling 😊

[@pedroalvessantos78]

@@EasyCADSolutions please do a video on this subject, im stuck in this part.

[@davidarias2003]

MUY COMPLICADO . Me quedo difícil .

[@EasyCADSolutions]

Try my other tutorials similar to this

[@aravindhvijayanandan3010]

Is this even possible in nx cad ????

[@EasyCADSolutions]

It's also a good cad software So may be yes

[@nishantdhengre8569]

at time 12.49 , I am not able to surface loft .I followed the process.

[@EasyCADSolutions]

Delete and fill the fillets by using delete face tool and then make the loft Hope it will work for you Happy Modelling 😊

[@Чорний-и6ь]

Клас!

[@EasyCADSolutions]

Благодаря

[@catkeys6911]

Ah- the PatternMeister strikes again! I recognize this pattern - looks like an adaptation of your Leaf Pattern On A Ring model.

[@EasyCADSolutions]

Yes, it's similar to the pattern on the ring but modelled in different way

[@45zheka]

Пора бы уже covid-19 смоделировать It's time to model covid-19 already

[@EasyCADSolutions]

Sure, I will try to make it😅