Bedini Generator, Free Energy, Perpetual Motion, Overunity, Radiant Energy. Open System!!!

First look at Advanced Bedini motor with high level overview of coming tests and proof of excess energy being produced. Demonstrating an open system machine that uses high voltage impulse function to charge a battery with radiant energy. Like and subscribe to help change the world!
#science #electricalengineering #tesla #prototype #building #imagination #overunity #powergenerator #engineering

[@tonyrebeiro]

Thanks for sharing. Battery swapping could be made automatic, using a mechanical holding relay. I made my 2 coil Bedini Energizer, for the first time in 2014. But I noticed that BJT's were not as efficient as Mosfets and also to use Mosfets, the timing arrangement had to be modified, using a hall sensor. This also allowed me to use the trigger coil for energy retrieval. My coil was only 5 strands plus trigger. By using just 3 strands for the motoring part and the other three for power extraction, I noticed that the overall energy gain was much higher and there was enough energy on board, to self run the machine and also charge LA batteries for external power draw.

[@nexpro6985]

How did this over-unity device pan out? Have you published your proof yet?

[@jensbuchholz5766]

Super 💥 Experimente 👌

[@raloed.363]

Have you heard about impulse power secrets and impulse energy secrets by kanarev. The papers claim self running generators are real and they have a picture of one. They also explain to some extent the theory behind it and create a new law called the inertial increase of electrical power. From my understanding: So a flywheel cannot do work if its speed is constant. However if the flywheel resieve periodical impulses that increase its speed, the flywheel speed now increases and decreases so its never constant. Thus it will provide real torque propertional to the change in speed. Once it is kept over a certain speed then its torque can be theroetically really high due to its inertia. This torque can then make a generator self run, especially if its a low drag generator.

[@MadscienceLPTECH]

stay tuned

[@hoofheartedicemelted296]

"Air Core vs Iron Core - They Are All The Same" by Paul Babcock. Purchase the full version of this presentation. It will reduce your learning curve by 30-40 years or so. Bedini passed on an Over Unity system. NOT an Over Unity device. The pulse motor is not very efficient and it's only one part of an Over Unity system. It is 20% efficient at best. So why or how could a pulse motor produce Over Unity, or Infinite COP? Let Mr Babcock tell you.

[@MadscienceLPTECH]

much higher then 20%, i believe the SG is over-unity with the correct fine tuning. Appreciate the info though, ill be sure to implement it

[@MadscienceLPTECH]

Thanks again for this information, I'm going to take this to the next level!!!!!

[@danielfeyerabend904]

Very impressive RPM. Looking forward to your performance numbers. Will you show a parts list and schematic also?

[@MadscienceLPTECH]

sure ill go over the parts and schematic in an upcoming video

[@danielfeyerabend904]

@@MadscienceLPTECH Great!!

[@burneye]

awesome work Brother! you said perpetual Motion in your title. can you do a demonstration of a livestream of it running for 24hrs or 7 days

[@QuantumEnergySearch]

Nice work.

[@MadscienceLPTECH]

thank you, ill be showing the excess energy produced this weekend, stay tuned!

[@pauldent3059]

I'm working on something similar but I'm not an electronics expert and I've been more focused on getting the wheel to turn using zero energy so all power out is pure free energy

[@MadscienceLPTECH]

Cool! I'm creating a fb page so we can share things like that.... stay tuned Paul!

[@gstorm1491]

Thank's for video! On your wheel is it ceramic or neodymium magnets?

[@MadscienceLPTECH]

im using both, one of each stacked on top of each other.

[@StringfellowHawke197]

As long as your using batteries, most people will be skeptical and un-impressed.

[@User2718218]

How are you measuring the input power and the output power?

[@MadscienceLPTECH]

Currently im measuring the work i can do form the batteries i charge.... just switching the batteries from charge to run positions give >95% efficiency, and bedini said that wasnt the way to overunity, you need to do conventional electrical work with the radiant energy charge battery...

[@User2718218]

@@MadscienceLPTECH How do you measure the work you can do from the batteries you charge?

[@scratchbuilder5952]

Hi…i liked and subscribed i love the whole overunity thing…and 100% support your efforts…but I think there is something here that’s not been considered What if you’re charging system is putting spikes into the batteries.. that is causing micro tunneling(or other effects) to occur on the battery plates… increasing the battery surface area by 10 times or more Keep in mind a sugar cube has the surface area of a tennis court if you could lay all the molecules out flat Maybe you have discovered a way to make batteries work better by burst charging you are doing The only way to be sure is to take the batteries out of the equation So it appears that you are overunity … when in reality you might be dealing with batteries on steroids I hope you’re overunity…

[@MadscienceLPTECH]

Thanks for the comment, I'm testing the work that can be done by the charged battery vs the work the run battery put into the machine.... we will find out shortly. Stay tuned, I'm.not stopping until bedini and kromrey are 100% demonstrated to be over unity and open systems

[@innovationsforall]

@@MadscienceLPTECH maybe supercapacitor instead, to remove possible chemical energy (magic) from the equation? Subscribed

[@cesarbaratas5612]

How long have you been working on these hobbies? Overunity,,

[@MadscienceLPTECH]

years, my main restriction is money... im about to invest another $2000 into the kromrey, hoping that will be enough to replicate john bedini's results

[@cesarbaratas5612]

Been through a lot of experiments before, its really hard to self run these kind of devices,, ,,, had tried to comnined it with "splitting the positive" configuration on battery really efficient while also collecting collapsing spike, ,,,,, Maybe if u can combine kromrey, splitting positve configuration, using bedini motor concept collecting backemf back to battery, maybe it will sustain self recharge and self run

[@daviddavids2884]

another, late, reality check the use of several magnetic poles on the rotor is good. but the use of single drive solenoid is still not adequate. this is so in part because, the forces in a rotary machine Should be Radially Symmetrical. so, your motor could/should be improved to have at least three drive solenoids. at link i demonstrate how to, without a DC clampmeter, Accurately Estimate the output current and volts coming from a tiny pm generator. yer motor is the alternator, i guess. facts: DC watts and AC watts are not 'equal'. wild AC is not the same as mains AC, even if the voltages are apparently equal. system output Must, therefore, be rectified before it's measured. in order to BE ABLE to say that a system is overunity, there MUST be a Comparison of watts-in and watts-out. a battery charging output circuit is NOT informative. in part, this is because the state of the battery being charged is Continuously changing. 'state' refers to resistance, impedance, electrical bias, etc. kzbin.info/www/bejne/n4CtlmWClNZ6ZtU

[@MadscienceLPTECH]

Haha I agree more coils are better, but that's about it... its not conventional electricity going into the battery Pure high voltage impulses, radiant energy

[@oliver1224]

Nice work there. Have you tried placing a Cap Dump across your output charge batteries? I couldn't see it in your video. Its better long term for the batteries as you'll notice eventually the Radiant Spike will make irreversible changes to the batteries.. I build my own Radiant systems & they are the future. Its good your getting the message out.

[@doubleooh7337]

Laws of induction? Do you know anything about it? I'm sure it was issac newtons work, be worth a read

[@MadscienceLPTECH]

I'm an electrical engineer and fully understand science... this would be operating in an open system vs a closed one... open systems break no laws

[@doubleooh7337]

@@MadscienceLPTECH I'm a qualified electrician went college but never did it as a job, they didn't teach us isaac newton law of induction but i did read it later on, you say in the video you don't know where the extra energy comes from, but its there ;)

[@MadscienceLPTECH]

@doubleooh7337 yes exactly, i belive it comes from somewhere that interacts with the high voltage gradient of the inductive collapse.... stay tuned, I've got lots more content coming up

[@doubleooh7337]

@@MadscienceLPTECH i will mate, i need some motivation before i finally wind my final aircore transformer motor, i got 10kg of copper wire 20 rolls of 500g wires winding 24awg, all 20 simultaneously wound together, i got 4 coils to make 2 for thd motor, 1x 20/1 transformer that can be 10/1 aswell for uk/usa output, what is left im making a giant pick up coil which I'm hoping will switch a transistor with just a turning magnet(no battery). Might not work but it might.

[@doubleooh7337]

@@MadscienceLPTECH I'll be putting it on here in a couple of months and gonna try to power a hydrogen cell from it and other stuff, n52 magnet spinning within a coil different way but years ago i did have a bedini ssg on it it span fast and chimmed, i wanna do more thsn charge a battery

[@WeighedWilson]

Brought to you by Charlatan Enterprises!

[@mahamudaakter2631]

Hello friend I'm Abdus Salam From Bangladesh 🇧🇩. Can i talk to YOU personally. WhatsApp and others

[@MadscienceLPTECH]

SURE, maybe this weekend ?

[@catchmeifyoucancatchmeifyo4215]

Could i have your email contact please. Thank you

[@MadscienceLPTECH]

[e-mail]