Beef up your Jeep Steering, Rundown on the PSC Big Bore Box

I get asked all the time, "What kind of steering should I add to my Jeep?" The PSC Big Bore Box is not new product to anyone, but it's our opinion from a Jeep Shop that see's the PSC box all the time.
Who are we? A custom Jeep shop in central Texas. We build Bad-Ass Jeeps. Each episode I take you to work with me. Enjoy our Builds, Tips and Off-Road Adventures.
Our website is exodus4x4.com
Contact me at 830-629-0057 or [e-mail] for a build quote.
For general questions post below, I always try to answer.
Follow Us @
Instagram: / exodus4x4
Facebook Page: / exodus4x4
This video was edited by the talented Gabe Hodge.
For the Legal Loons: This video was independently filmed and produced by Exodus 4x4. The opinions and actions of the individuals featured are in no way affiliated with or attributable to the products shown.

[@apexpredator_jku]

NOBODY packs their product better than PSC! When I got my Big Bore it was the hardest unboxing I ever did...50 industrial staples, nested between heavy duty molded foam. I went with the Big Bore XD w/ high vol pump,resi and cooler etc. I had no intentions of going bigger than 37s and thought I didn't have the need for ram assist. Initially, everything was great. Turned my 37x13.50 STT Pros with a finger, even with lockers engaged...til you're pinned up against the rocks on the more technical stuff. 1st trip wheeling with the Big Bore, half way through the 1st rock garden I immediately regretted not going with the XDII-R. If you're going that far, a couple more hundred for the ported box won't kill you. Even if you don't initially want to run ram assist then you can just keep it capped and if ever in the future you want to upgrade you're a couple of hoses away. In the end, I ended upgrading and luckily recouped and offset the cost from selling the Big Bore XD. Not saying the XD doesn't have it's place, just depends on what you plan on doing and terrain you're wheeling. Techy rock crawling stuff, go ported.

[@stevetabor4447]

I’m dying here lol ahhh to funny good stuff bubba definitely a major difference can’t stop laughing on the cavitation had a good joke butt would get hell for it as always be safe 👍👍

[@cgscprspecialist3937]

Your whole team are so honest about products do's and don'ts best custom service

[@Exodus4x4]

Thanks! We do our best to provide the most unbiased, unsponsored product reviews on KZbin!

[@mikehoffman3690]

Not an inexpensive part, but definitely needed if you plan to run large tires.

[@Chris-sd4ri]

Same sector shaft as a dodge 3500 diesel just beefy I did the big box and the pump kit from psc it’s great steers 35” with one finger

[@djtoo7]

AGR has had and its a beefer one aswell. And they are made here in. USA.

[@xMikeDx]

Ya dropped a letter Kenny!!

[@kentaylor6870]

Great video. Had no idea you could run 37” with just the big bore. Thanks for the heads up

[@jkustockaphobia2421]

I plan to take you my jk to do this install when I go to 40s

[@Exodus4x4]

🤘😎

[@rolandpena27]

As you can see it has a huge sector shaft! .... That’s what she said. 😂🤣😂

[@RLewis-yz4yd]

Been running the Big Bore Steering Box for about a week now and I have 38x15x20's Nitto Muds and it turns the wheel with ease very noticeable difference, best mod I've done

[@nightlighton]

Are you running stock pump or did you upgrade the steering pump. About to buy a big bore and curious if I can stick with stock pump

[@JohnnyMcFLY100]

How has your set up help up after 2 years, I have 38x13.50x20 Toyo Open Countries. I’m wondering if I can grab this kit now and upgrade to full hydro when I upgrade my front Axel. Or should I just break the bank now.

[@RLewis-yz4yd]

@@JohnnyMcFLY100 What's up man... My setup has been flawless absolutely no issues at all. I did upgrade the steering pump at the same time, only bcuz I knew it would eventually go out....

[@ElevatedVehicles]

How are things today, 4 years since your comment? @@RLewis-yz4yd

[@tradiesupastar4539]

Could you just add the box on a gladiator jt without the hydraulics too?

[@videowatcher314]

You scored mad cool points for the letterkenny clip! Lol

[@Exodus4x4]

Thanks, that’s what I appreciates about ya!

[@austincableguy]

Yup

[@heathweeks1985]

LMAO with the jokes. My kind of people!

[@GulfVet213]

The stock steering box on the Jeeps are junk. If you have steering issues that can't seem to be corrected don't let the Jeep dealer, mechanic, or even other Jeep owners say" It's a Jeep thing...It's just how they drive"... I understand they do not handle like a sports car, but I see a lot of steering problems are being misdiagnosed. The steering box is sometimes the root of steering issues that is often overlooked.

[@JeepTJay6]

What would you say that big bore box weighs (ball park) just curios

[@klumsytone]

Did you have to adjust the steering gear box? I have this gearbox and there is play in my steering? All new steering components.

[@ati573]

Good info. Is something like this needed for the jlu

[@Exodus4x4]

Haven’t seen a need for it on the JL platform yet. The sector shaft is much larger on the newer platform

[@robottaway]

Whats a zj?

[@nismofan740]

just installed the on my jkur. anyone else have a dead zone? like when driving straight you can turn the steering wheel back and forth a bit before the jeep turns. my old box didn't have much play (if any at all). PSC is telling me this is normal.

[@Exodus4x4]

I’ve seen it, but not often.

[@weller-habits]

Do you have to run the high flow pump with just the big bore?

[@Exodus4x4]

Highly, highly recommended.

[@nelsontorres1235]

Can I do this install and keep the stock pump? I run 35s only.

[@Exodus4x4]

Yes

[@JWard2]

Would you recommend getting a sector shaft brace with the big bore box?

[@Exodus4x4]

Yes

[@JWard2]

@@Exodus4x4 which sector shaft brace fits the big bore that you recommend?

[@supersportimpalass]

@@Exodus4x4 which brand do you recommend?

[@edmondndrecaj4377]

Would this steering box work on a 01 xj

[@Exodus4x4]

No

[@rneerpat]

Does this system increase bump steer

[@Exodus4x4]

You need to correct the relationship between your drag link and track bar. This will not do that

[@patrickyi2527]

How far is the drop on the pittman arm?

[@Exodus4x4]

Same as stock

[@heartofthunder1440]

In other words if you aren’t planning on shelling out a bunch of money leave in factory, play hard takes all your money.

[@danialphaomega]

He said a couple hundred dollars lol More like $1,500 dollars!

[@greg1629]

Yeah f that!!

[@woodystubb686]

aswome box,do they offer this for the 2021 rubicon?

[@Exodus4x4]

They do!

[@woodystubb686]

@@Exodus4x4 aswome, I got 35's and when I'm wheeling and in a bind it doesn't want to turn until I'm rolling, so this will be put on the must have list,keep the videos coming I enjoy watching them 👍

[@Colorado4x4]

How have these been holding up? Any issues or leaks?

[@Exodus4x4]

Just fine

[@Colorado4x4]

Thanks! I’m running 35s and do a decent amount of wheeling. Do I need the cooler or new pump to go with it? I can give you a call too to get your opinion

[@shae7210]

Will this fit a RHD Jeep? asking for the Australians hahaha

[@Angl0sax0nknight]

When Girth matters......

[@jrsplace1]

What is the install time on this system?

[@Exodus4x4]

On a JL or JK?

[@jrsplace1]

Exodus 4x4 JK

[@jrsplace1]

JK 2013

[@Exodus4x4]

About 8 hours to change it all out and install the ram.

[@jrsplace1]

OK, thanks for the quick reply.

[@GDlover5555]

lmao

[@fredgraber5230]

"and epstein didnt kill himself" . Love it.

[@ricardolopezdevictoria1109]

Red Neck Ram is much better and a lower price.

[@Dave-vm7rg]

Epstein didn't kill himself! 🤣🤣🤣