BeepSurvives The Moon EP5 Stationeers Solar Array

[@BayalinAlamain]

Nice power set up, and now you have a lot of power gen, I’d get some deep drills going before your atmospherics set up. This will give you passive ore gen for all those mats you will need for atmospherics and base building later. The easy route is electric centrifuges you will need 2.3 electric centis per deep drill. I personally run 3 deep 7 centis per section. It’s really easy to program them to auto dump when full too. Another game changer is the sensor lenses they are arguably the best tool in the game! All you need is an advanced furnace and some fuel gas. You dropped in with a 4MPa fuel tank. Make 50g of inconel. You can use the reminder inconel for nuclear batteries. You will need a GPR chip from the tool printer too. With these things resources will be simple

[@NoHypocrisy42]

All of this! Except I'd do 6 electric centrifuges (6 ports on an ic chip) to 3 deep miners with a silo and stacker for dirty ore. Which I usually double eventually. Then you need silos, sorters, stackers, etc for your ores. And I never put fuel gas into my advanced furnace until late game. 1 ice oxide and 2 ice volatiles per needed. Empty waste gases for best results.

[@BeepSurvives]

Hmm yes good idea. The next 2 episodes are lined up already but we will have to wait for gases to fill up so I think I will do deep mining there. We will need even more since I plan to set up the layout and design for the final base soon.

[@NoHypocrisy42]

@@BeepSurvives I would still do deep miners first. Then you don't have to mine as much.

[@BeepSurvives]

Should have been clearer in my reply, the next 2 episodes are pretty much recorded, im piecing together some cuts over the next couple days. I AM interested in doing them and we will tackle it in the next episode i record (e7 i think)

[@NoHypocrisy42]

The bread is a lie. 😂 -Also, it's easier to build pipes/cables/etc using only straight and curved pieces while having the tool in other hand. -Transformers also use 10w from output side. So I usually set to 4990. Similar for heavy Transformers set to 49990, and use 2 to max out a 100kw cable.

[@BeepSurvives]

You are correct. I start setting them correctly in the next episode, thanks for the reply and advice!