Beginner's Guide to CLO Part 1 Foundations: Simulation & Particle Distance (Lesson 7)

[@clairejago5469]

This whole Part 1 Foundations module has been amazing, so well explained, and a really nice progression through the functions. Great for taking notes as well. Thank you!

[@CLO3D]

So nice to hear. Thank you for your feedback

[@niyatisingh3852]

Hi, I have a laptop with a NVIDIA GeForce GTX 1050 (4 GB GDDR5) graphics card and I am using Clo 6.0, but the gpu simulation option is still not supported in my device. Why is that ?

[@CLO3D]

Please visit our Support Forums and provide all the details of your hardware there. Include Screenshots of the Render Properties Options. support.clo3d.com/hc/en-us

[@allanamcgowan786]

I only have two options for the simulation - Normal and fitting (accurate fabric) which Isn't in the drop down on this video. Is this due to the graphics issue you mention in video that some of the options won't be there if your computer doesn't have the necessary graphics card? I'm just wondering about the fitting (accurate fabric option too then). Also I have the hi-res garment icon but I'm missing the low-res option. Would there be any reason for that?

[@CLO3D]

Yes, if you are missing GPU simulation it is because you do not have a dedicated graphics card. The low resolution button is grouped into the high resolution button in 5.2. Hold the tool down and the other options will appear as a drop down menu.

[@PINK_DESIGNER]

Thanks for your great tutorial, I have a question, could you please tell me how to set up the notch?

[@CLO3D]

You can add a notch anywhere you want by using the Notch Tool. Or by using the Walk Pattern Tool. kzbin.info/www/bejne/a33WqaOXZ7eeopY

[@ah2247]

Is there a "Tool" Cheat Sheet available for reference?

[@CLO3D]

support.clo3d.com/hc/en-us/community/posts/14538717208089-Keyboard-Shortcuts-and-Tool-Hotkeys

[@marvinphan5877]

After stimulate, why my garment didn't move while im using X-ray joints to change avatar posing ? Thank you!

[@CLO3D]

To move the garment while using the XRay joints, leave simulate running as you edit the joints.

[@marvinphan5877]

@@CLO3D Thank you for your support.

[@CLO3D]

@@marvinphan5877 Sure!!

[@_Shinique]

Hello. I am using a newer version. Is "Complete" the same as "Fitting (Accurate Fabric)?"

[@CLO3D]

Yes it is.

[@РузаннаАбраамян-я4ч]

Hello! Thank you for amazing video. Tell me please, I have a version 7.0.480 and I can't find 4 types of simulation, I have there only normal and fitting. Where I can find the rest? Thank you!

[@CLO3D]

If you are on a Mac you will only have 2. On a PC there is 3.

[@АнастасияАляева-ш6о]

Hi there! I have trial Clo 5.2 and my property editor doesn't show any info. I tried to follow this lesson, but when I click on a detail, editor is blank. What can be the problem?

[@CLO3D]

Sorry for the late response. Were you able to solve your issue?

[@gunnarnygren51]

Hi, these lessons are amazing! I'm curious about what hardware the device the tutorial is being conducted on has?

[@CLO3D]

👆🏻

[@mercedesworllld]

why is the volume so low?!

[@CLO3D]

Check the volume in the KZbin controls; recorded volume is good.

[@ceesh5311]

Please give the practice files a chronological order and turn up the volume next time. Otherwise nice tutorial thanks

[@CLO3D]

Noted

[@Tomas-py7vh]

Hi! On my simulate button I have only two options: Normal and Fitting, why does on the video shows 4 options? Also on the Hi-res properties > Simulation quality I have two options: Normal and Fitting, but on the tutorial shows Normal and Complete, why's that difference? Amazing tutorials, thanks so much :)

[@CLO3D]

This is because as of 5.2 the Simulation names were changed - below is a link to page that explains all these differences. If you do not have Fast(GPU) it is because your computer may not meet the minimum spec requirements to run this. GPU requires a dedicated GPU graphics card. support.clo3d.com/hc/en-us/articles/115000304968-Simulation System requirements can be found at the bottom of this page: www.clo3d.com/pricing

[@Tomas-py7vh]

@@CLO3D Thanks for the answer :) I'm using a laptop with a AMD Radeon Pro 5500M 4GB Intel UHD Graphics 630 1536 MB graphic card. Is it posible that I don't see the other two simulation options because I'm using a MacBook Pro (2020) ? Thanks ✌🏼

[@CLO3D]

@@Tomas-py7vh Oh yes, this is also not available on MAC or with AMD Graphics cards. Sorry :(

[@Tomas-py7vh]

@@CLO3D no problem, still a great software! Let's hope for a 5.3 compatible version for Mac users. Thanks a lot :)

[@mosartsus1898]

Hi, I can't click the "download" , Can't download the files.

[@CLO3D]

Sorry about that! It should work now.

[@yauheni3547]

When will be the next part of the lessons?

[@CLO3D]

By tomorrow!

[@yauheni3547]

@@CLO3D Guys, we are sitting at home and waiting)

[@peterlange9664]

How to reset the simulation?

[@CLO3D]

To set the garment back to the position prior to simulating, you can simply undo [CTRL-CMD-Z]. To reset the patterns to their Arranged position you can use the Reset 3D Arrangement [All] tool or Right-Click on the Pattern Piece and Select Reset 3D Arrangement [Selected}

[@lahcenebouabid2375]

S il vous plait est ce que vous avez des vidéo en français

[@CLO3D]

We are working on making sure our videos can be enjoyed by everyone. We apologize for this inconvenience are working to rectify. Thank you for your patience.

[@inter.esting]

does clo support radeon on just nvida because I have a good graphics card that can run black ops cold war but not simulate gpu in clo :( so i'm just wondering if they'll ever update that? :)

[@CLO3D]

CLO is optimized for Nvidia.

[@alinadianastefanescu3869]

Why is the quality of the video this bad? Most of them are blurry. Make no sense.

[@CLO3D]

Our apologies, but the video views fine. Is it possible it is your internet connection?

[@katharinaschwander66]

quality of the video is totally fine. with1080p it's great to watch.

[@CLO3D]

@@katharinaschwander66 Thanks.