Beginner's Guide to Starting a Woodworking Shop for under $1,000

  Рет қаралды 71,980

731 Woodworks

731 Woodworks

Күн бұрын

Пікірлер: 197
@731Woodworks
@731Woodworks Жыл бұрын
▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next = Top 10 Woodworking Tools I Bought on Amazon - kzbin.info/www/bejne/ZmbboYSJjKabeM0 Tools In This Video: Lefty/Righty Tape Measure - amzn.to/3O6eT1K Fastcap Old Standby Tape Measure - amzn.to/3O4CHmJ Swanson Speed Square - amzn.to/43Dcd1i Framing Square - amzn.to/44ADliZ DeWALT Drill / Driver - amzn.to/44TD36C Skil Circular Saw - amzn.to/470dSRp Upgraded Circular Saw Blade I Recommend - amzn.to/43CNA4M DeWALT Sander - amzn.to/3rIMFTu Craftsman Sander - amzn.to/43wt5qA Bessey Pipe Clamps - amzn.to/3Dqc6vy 3/4" Pipe 4-Pack = amzn.to/3Do7G8j Irwin Quick Clamp Set - amzn.to/3DvOhlP Makita Trim Router (Amazon) - amzn.to/44BvEZU Makita Trim Router (Acme Toos) - acmetools.pxf.io/Y9oKZO Bosch Trim Router - amzn.to/3q3rWJp DeWALT Table Saw - amzn.to/44HH8ew Skil Table Saw - amzn.to/3KbaUjs Skil Table Saw (Tool Nut if sold out on Amazon) thetoolnut.sjv.io/VmZZEj Sun Joe Shop Vac - amzn.to/3Q83Yra DeWALT Shop Vac - amzn.to/3rM6uZK DeWALT Miter Saw - amzn.to/3O2EMj8 WEN Miter Saw - amzn.to/3DvP06x If you have More budget, these are the Upgrades I would buy over the tools above: DeWALT Cordless Router - amzn.to/3Do8dqP Festool Dust Extractor - amzn.to/3Y1pfES DeWALT Dust Extractor - amzn.to/3Ka7ltA Bessey Parallel Clamps - amzn.to/3Dm8Y3Q SawStop Table Saw - amzn.to/44yF5JF Bosch Miter Saw - amzn.to/3K8XtAA Makita Miter Saw - amzn.to/44ClpUX Festool Miter Saw - amzn.to/3Oqiut5 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
@veritylarson114
@veritylarson114 11 ай бұрын
The link posted for the Makita trim router is bad. Is there a model # you could share?
@731Woodworks
@731Woodworks 11 ай бұрын
@@veritylarson114 thanks for letting me know. I added a link to Acme Tools for it. You can get the info there. Thanks again!
@BroRiv
@BroRiv Жыл бұрын
How to become a MILLIONAIRE being a woodworker? Start out as a BILLIONAIRE🤣
@731Woodworks
@731Woodworks Жыл бұрын
🤣
@thesawwdustshop
@thesawwdustshop Жыл бұрын
#Truth
@harisjaved1379
@harisjaved1379 Жыл бұрын
Lol , pretty true! Tools can get expensive! Especially buying new or going with Makita or festool
@joelkinstle381
@joelkinstle381 Жыл бұрын
You know how to make a small fortune in [insert industry here]? Start with a large fortune, and... It's a classic. 😂
@j10001
@j10001 Жыл бұрын
There’s another way to become a millionaire as a woodworker: Just work a million hours.
@alanray10818
@alanray10818 Жыл бұрын
Some sort of hammer, a carpenters chisel, a cheap block plane. Those would have made my list.
@kyle.goslin
@kyle.goslin Жыл бұрын
0:25 Tape measure 1:16 Square 1:59 Drill/Driver 3:40 Circular Saw 5:21 Sander 6:18 Clamps 7:28 Quick Clamps 7:49 Router 8:26 Table Saw 11:48 (BONUS) Mitre Saw
@AABlindSquirrel
@AABlindSquirrel Жыл бұрын
A jig saw is a great addition. Works for breaking down lumber as well as cutting curved parts. You can’t underestimate the ability of curves to step up the appeal of a project!
@tom.coomes
@tom.coomes Жыл бұрын
Great video as always and a very good list of suggestions. Only thing I would add would be PPE, which is always important, first and foremost.
@Galdnieks
@Galdnieks Жыл бұрын
Bought the skill tablesaw after your review and never regreted it. Now it's the main tool in my workshop.
@fun149
@fun149 Жыл бұрын
The full size rigid table saw at Home Depot on sale for $399.99 is a great alternative option for a nice inexpensive full size table saw.
@usablellc6735
@usablellc6735 Жыл бұрын
I'd definitely add a super accurate square of some sort to check the accuracy of the table saw and other tools. Also, a drill guide of some sort to ensure that holes are dead square to whatever you're drilling.
@FurrReal56
@FurrReal56 27 күн бұрын
I’d also add a drywall square as well. This is pretty cheap and can help cutting the bigger sheet goods with the circular saw easier before upgrading to a table saw.
@ryanrank3070
@ryanrank3070 Жыл бұрын
Something that always seems to get missed on these lists is bits. You have a drill and a driver, but no bits for it. Router, but no bits. You can get ones that are reasonably inexpensive (good for a beginner), but that will add to the cost.
@thesawwdustshop
@thesawwdustshop Жыл бұрын
It was thinking something similar, but this is a list of tools. Bits would be considered accessories. But that would be another great video for beginners.
@1steelcobra
@1steelcobra Жыл бұрын
For drill and drive bits DeWalt makes pretty solid ones at a low price. Project Farm's tests of their drill bits hasw them consistently come up pretty close in performance to really expensive ones. You can get a pretty comprehensive 30-piece impact bit set for $10 and a 21-piece drill bit set ranging 1/16th to 1/2" for $20. So $30 for a pretty good head start on your tools.
@chuckgrumble5440
@chuckgrumble5440 Жыл бұрын
snag some yonico router bits it your on a tight budget or you plan to abuse it, otherwise grab whiteside and support usa
@doomedwit1010
@doomedwit1010 3 ай бұрын
Yeah my bits cost 2-3x what my (cheap, corded) router cost.
@cynicallyskeptic4295
@cynicallyskeptic4295 Жыл бұрын
I would add a jigsaw into the mix. Also the first project for many people is a work bench/table. Include the cost of some materials for a basic work bench.
@thephilosopher5799
@thephilosopher5799 3 ай бұрын
Yeah jigsaw was one of the first things I bought after my circular saw. Making curved line cuts is in some beginner projects I look at.
@davidkantor7978
@davidkantor7978 Жыл бұрын
What about chisels, planes, hand saws (of which there are 100 types)? And, as one other commenter mentioned, a workbench, or tools and materials to make one. And it needs good work-holding features, including a planing stop. One more thing. I learned woodworking from an old master. I asked what tools I should get to start His advice was to get sharpening equipment. No one mentioned sharpening equipment yet. And what about a band saw? It was my third stationary tool, after a table saw and a drill press (oops; I neglected to mention the lathe, but that’s a separate matter).
@Deftallica9
@Deftallica9 Жыл бұрын
I would argue that a miter saw is essential for a beginning woodworker, more so than a table saw. Just speaking from my personal experience, while the table saw is unquestionably the more versatile and essential of the two, it’s also more intimidating and, again speaking for myself, I hesitated to use it quite a lot when I began a little over a year ago. During that time I leaned heavily on a little Craftsman sliding miter saw that ran on their V20 battery line (this was also because I’m in an apartment garage with only 1 outlet). With that saw I made several smaller scale projects and some shop furniture both for my home shop and for my boat shop parts room at work. I also recently became a student of Steve Ramsey’s Weekend Woodworker course, which doesn’t incorporate a table saw until the third project. My wife enjoys helping me build things but even now doesn’t use the table saw. Sorry to ramble on, but I guess the point I’m trying to make is that plenty can be made with a miter saw, and I view it as a workhorse, at least in my shop. And it is a great entry point for someone who wants to create but is hesitant to jump right in using a table saw.
@j10001
@j10001 Жыл бұрын
True. It’s easy to forget how intimidating these things can be when starting out! Even my Ryobi miter saw scared the b’jeebies out of me the first 20 times I pulled the power trigger button. It gave me a very healthy respect for the power and danger of these tools.
@richardseabright448
@richardseabright448 Жыл бұрын
Track saw, Band Saw, thickness planer. Add in a drill press and some quality hand tools and you've got a shop. A cheap table saw is not a good idea unless you are into carpentry. For fine woodwork it is pretty much useless. You don't need it until you need one and a portable is not going to do the job.
@doomedwit1010
@doomedwit1010 3 ай бұрын
I think the reason is everything you can do on a miter you could probably do on a tablesaw with a jig. But many things like straightening an edge cannot be done on a miter.
@joseescoto9069
@joseescoto9069 Жыл бұрын
Great video. I’d love to see if you have an upgrade video. Items that you decided to upgrade over time for better utility
@upnorth1955
@upnorth1955 Жыл бұрын
You nailed it! I wish I had seen a video like this when I started woodworking. It would have saved me a lot of money.
@scruffysanta8442
@scruffysanta8442 Жыл бұрын
Nice setup... Great starter set and room to grow and improve as you find tools that you need for a specific project. Only thing I can think you missed is a pocket hole jig, Made my life much easier.
@731Woodworks
@731Woodworks Жыл бұрын
Ahhh! I did miss that one! Thanks Scruffy!
@RichM1967
@RichM1967 Жыл бұрын
Just picked a nice one up at Harbor Freight for $50. Drill Master Pocket Hole Jig.
@bret_Lambky
@bret_Lambky Жыл бұрын
I have the skill skill saw. It’s a really nice machine. For a beginner, novice or pro this is a good addition to anyone’s collection!
@MakeitZUPER
@MakeitZUPER Жыл бұрын
Having an oscillating multi tool is extremely handy. Other items I would add to the list are: Drill bits Driver bits Miter saw Vise Jigsaw Drill press Reciprocating saw, small or large Circular saw that is for the opposite side of the one you have so that you have a left & right. Hand held belt sander Hand held power planer Sanding station with a belt and disc Levels of all sizes Router table Plunge router Portable bandsaw Saw horses, metal & disposable/consumable plastic ones. Advanced tools: Wood Lathe and accessories Large Scroll saw Large bandsaw Sliding miter saw Kregg Jig and numerous other small setup tools Forstner bit set
@Luissanchezisunza
@Luissanchezisunza Жыл бұрын
You missed 1 VERY important tool for every shop.......a pick up truck to get the plywood and boards for whatever you're building!!!! You made me change my mind between miter saw and table saw. Thank you and god bless you and your beautiful family.
@DezRAT1990
@DezRAT1990 Жыл бұрын
I like the SpecOps brand....big printed numbers help on their tape measure
@greatgrandpaswoodworking
@greatgrandpaswoodworking Жыл бұрын
Combo Square and a pocket hole jig. Also a AWL to start the drill point from wandering.
@doomedwit1010
@doomedwit1010 3 ай бұрын
My advice would be figure your next project. Buy only what you need for that job. This video is still great for picking specifics
@JWimpy
@JWimpy Жыл бұрын
I am a big Milwaukee fan-boy and have thousands of dollars of Milwaukee corded and cordless power tools. But I have a DeWalt 1/4 sheet sander that is my favorite go-to sander for everything needing sanding. I have several other sanders that are just taking up space in my cabinet.
@freddyjoe0910
@freddyjoe0910 Жыл бұрын
The jig saw is a must!
@monteglover4133
@monteglover4133 Жыл бұрын
The Milwaukee M12 drill and impact driver set regularly goes on sale for $99 enough power for 99% of my fairly heavy use and they are small and lightweight I use in my shop the Fastcap Flat Back as it lays flat on your project In over 20 years I’ve do not recall ever using the variable speed on my Random orbit sanders
@deadtolove
@deadtolove Жыл бұрын
I actually bought that Skil Table Saw a few weeks ago based largely on your review video of it. I love it, it's absolutely an amazing saw for it's price. Thanks for the recommendation!
@johncoutret7353
@johncoutret7353 Жыл бұрын
I would recommend a Kreg AccuCut with the expansion pack. When you mate it with the circular saw, you get a very useful tool. Once I got one, I was able to make much more accurate cuts on larger pieces than I can trying to wrestle them through my contractor size table saw. Every time I use it, I think about the value to cost ratio. It is excellent.
@wr3ncher
@wr3ncher Жыл бұрын
Especially if you’re on a budget and not a seasoned wood worker, cordless brushed tools will destroy themselves if you push them. Brushless saws won’t cook themselves as you try to get the last bit out of that battery.
@JohnTurner313
@JohnTurner313 Жыл бұрын
Nice list! The only thing I would add is a good bit set for the driver and drill, and maybe the router. And PPE and marking tools like pencil or grease pencil but those probably aren't worth counting dollar-wise as they are inexpensive.
@jimh472
@jimh472 Жыл бұрын
Agreed, especially on the router. Routers with bad bits are just dangerous smoke machines.
@charles6762
@charles6762 Жыл бұрын
I would have compromised somewhere and got a track saw maybe the ridged you reviewed for breaking down sheet goods it would be one of my first buys.
@FixItFrench
@FixItFrench Жыл бұрын
What an awesome idea for a video! This would be a great starter pack for someone to start their woodworking journey. The best part is that you’ve used all of these tools. I’d add some chisels to this list, but if you want some good ones, you’ll have to spend a decent amount
@natepeterson7145
@natepeterson7145 Жыл бұрын
If you have the budget I recommend the Bosch that you can butt up against a wall for a miter saw. If you have minimal shop space, plus it has a laser.
@mcmathwoodworks
@mcmathwoodworks Жыл бұрын
No pocket hole jig?! lol I agree with your list, thanks for putting this resource together Matt!
@michaelvandyke6658
@michaelvandyke6658 Жыл бұрын
I got the Craftsman aat Lowes for 99.00 apair drill driver and i had to redeck 3 48 foot tractor trailer flatbed trailers i did all 3 and they held up good and i am still using them 6 month later for the price they are good
@RichM1967
@RichM1967 Жыл бұрын
MANY times you can find the power tools at pawn shops, facebook marketplace, thrift stores. I bought a Porter Cable buscuit jointer for $25 at goodwill, 6 hp Shop Vac brand shopvac for $25 at Habitat for Humanity Store. Shop vacs are common to thrift stores, I've picked up several and use them for dust collection. At a Pawn Shop I picked up that Dewalt / drill impact with charger and 2 batteries for $80. I also picked up a craftsman 10 inch table saw with a cast iron top $60 off of Facebook marketplace. I spotted a Dewalt 735 planer for $200 from a 2nd hand tool shop. Ryobi Drill press for $80. Just last week I saw a craftsman table saw in Habitat For Humanity store for $100, and a craftsman router table (with router) for $40. Shop around before you buy new.
@kamelsr
@kamelsr Жыл бұрын
I have a very small shop and when I started out I had everything corded even the drills/drivers. You can shave about $100 or more (depending on the deals) just on a corded drill system.
@scottbionicnerf8727
@scottbionicnerf8727 Жыл бұрын
Thanks for another great video Matt. Im sure this will be a huge help to many wanting to become more than just Wood Working Fans.
@731Woodworks
@731Woodworks Жыл бұрын
I hope so!
@am2dan
@am2dan Жыл бұрын
There are probably some hand tools that should be considered, like a flush cut pull saw and a basic chisel set.
@TenRooster
@TenRooster Жыл бұрын
hey id actually recommend the bessey quick clamps over the irwin ones, as they come in a set of 4 like the irwin, (2x6inch, 2x12inch) but can also be used as a spreader. the spreader is useful for glue ups if u don't have a lot of longer clamps, because you can take a 2x4, attach a small block to one end with some screws, then about 5-6 inches longer that your glue up, add another block. make a few of these and then place your glue up on them, then use your spreaders to apply the clamping force. I probably wouldnt recommend this for higher end woodworking, but in a pinch it will probably do. you could also use the 2x4 clamp things to hold longer pieces together. Great video man!
@RJSDZNS
@RJSDZNS Жыл бұрын
If I may be so bold as to add one thing...... My wife talked me into picking up some decent corner clamps. I don't know how I've been a wood worker and not used these. They are only about 40 bucks and now I think they are essential!! Great video Matt!!
@731Woodworks
@731Woodworks Жыл бұрын
That's a great idea!
@buckypayton486
@buckypayton486 Жыл бұрын
I agree with your list, but I'm surprised that the self-proclaimed "pocket-hole king" didn't mention a pocket-hole system. Just saying :) I TOTALLY agree with putting the table saw ahead of the miter saw. The first thing I bought was a miter saw. I gave it away within a month of getting my table saw. Never used it any more. Also, haven't missed it since I got rid of it. Table saw does it all and I can use the space that the miter saw was occupying for other stuff now. I've been a subscriber and big fan for over a year; keep on keeping on!!
@danalaniz7314
@danalaniz7314 Жыл бұрын
Excellent video. I regularly watch your videos and reviews and I'm really glad you put this together. Thanks!
@731Woodworks
@731Woodworks Жыл бұрын
thanks! Glad it was helpful!
@Kreacher1974
@Kreacher1974 5 ай бұрын
I bought the craftsman after watching your video. Can't wait to use it. Have you ever tried the Herules miter saw or can you review one? Please and thank you!
@shanemelville
@shanemelville Жыл бұрын
You should put a jig saw on there. You need the ability to make curves easily and inexpensive.
@TehDrewsus
@TehDrewsus Жыл бұрын
Love this video. I have most everything (and more) except the table saw. Just not space for it. Thankfully my uncle lives 12 minutes away and has a 600 sq ft shop 😅 Ran into a weird thing with my ryobi OnePlus circular saw today... It did not want to cut all the way through a 2x4, left just a little bit of material underneath despite being adjusted all the way. I wonder if the OEM blade is THAT bad. I'll be getting a diablo soon anyway.
@Raequest
@Raequest Жыл бұрын
Excellent timing for this video. I had bought a hercules tablesaw three weeks ago and I had been struggling to get straight cuts. I just returned it today and was checking around for a better one and was eyeing the dewalt one, but I was worried about having the same issue again and decided to check youtube for reviews. Well your video popped right up and after watching this I ordered my new tablesaw, thank you so much. I hope to get back to my project soon!
@realJohnJohn
@realJohnJohn 2 ай бұрын
I know this a yr ago but would still chose the DeWalt or Milwaukee drll / screwdriver set
@leeslegacywoodworking5405
@leeslegacywoodworking5405 Жыл бұрын
Some sort of hammer. It could be a mallet or claw hammer. To me, this is a must.
@donbrunodelamancha1927
@donbrunodelamancha1927 Жыл бұрын
731 Matt, brilliant show as always. Of course it is Sunday, so I expect nothing less from you. May I say, your production value has gotten exquisite. Much L🫶🏻VE and God Bless Y🫶🏻U and Miss Amy‼️🫶🏻🫶🏻🫶🏻✝️✝️✝️✊🏼✊🏼✊🏼
@731Woodworks
@731Woodworks Жыл бұрын
Wow, thanks!
@elijahbonner4398
@elijahbonner4398 Жыл бұрын
I started with a drill and impact as my first a skill saw 2nd jig saw 3rd plainer 4th sander 5th and I got a tape after that I make counter tops so I wouldn’t change the order I did stuff in
@rub-d4l
@rub-d4l Жыл бұрын
Thank you for the video 👍
@likeskittys
@likeskittys Жыл бұрын
Love the video, I would just add a short fallow up video how to pick safety equipment ( hearing, mask, and glasses), drill bits, also glue, and screws. But I guess that's more of personal choice as to what you are working on. As those are still needed things for wood working.
@731Woodworks
@731Woodworks Жыл бұрын
Thanks. Good idea.
@robertast.esprit7679
@robertast.esprit7679 Жыл бұрын
I'd take a jig saw over a skill saw. But the rest is good. Add the safety gear also
@MrOmelianchuk
@MrOmelianchuk Жыл бұрын
This was SO helpful. Thank you!
@731Woodworks
@731Woodworks Жыл бұрын
Glad it was helpful!
@simonr6793
@simonr6793 Жыл бұрын
The only tool that scares the bejesus out of me and alway's has is the circularsaw, its possibly one of the most dangerous things I've ever owned and honestly if and whenever I need to use it i alway's opt for using my tracksaw i find it way way safer to use!!! Matt you had me laughing at the comment about you getting old and the colours of the T-square im 50yrs old and my hearing and eyesight is spot on it's just the darn rest of me that's falling apart😮
@joebeaton1101
@joebeaton1101 Жыл бұрын
Some good info there... And, totally agree on drill / driver combo > My most used tools!!
@jimrosson6702
@jimrosson6702 Жыл бұрын
Great tips Matt thanks for sharing
@731Woodworks
@731Woodworks Жыл бұрын
Thanks for watching!
@michaelfairchild
@michaelfairchild Жыл бұрын
You should do segments where you compile random tool/workshop fails with commentary.
@731Woodworks
@731Woodworks Жыл бұрын
That would be a good series.
@MissCarty
@MissCarty Ай бұрын
thank you sooooo much!
@gnic76
@gnic76 Жыл бұрын
Advantage of pipe clamps is that if you get pipe that is threaded on both ends, you can add another length of pipe if you need longer clamps for something.
@bbest8
@bbest8 Жыл бұрын
@9:28...Were you puckering up when that piece fell inside? lol👊👊
@ttgautam21
@ttgautam21 Жыл бұрын
I have 3 tape measures and I am not a wood worker but still enjoy ur videos.. and all 3 tape measures have loose hoke slot somehow.. so I would fail on the first step itself 😂
@davegravel3740
@davegravel3740 Жыл бұрын
One subject you completely missed. Shop safety. Beginners often don't know or realize what protections they should have. Safety glasses, ear muffs and dust mask are required PPE if anyone ever does work with me.
@phantomviewer
@phantomviewer Жыл бұрын
Hold off on the table saw and get a mittersaw. The circular saw cam do the same as table saw for the most part. Also you dont need an impact for woodworking. Get a drill/driver. I have several Milwaukees but i go to the skill drill 90% of the time it is lighter and strong enough for most things cabinet woodworking.
@AngadSodhi
@AngadSodhi Жыл бұрын
The DWE7485 comes at a great price but there are two problems with it - the knob to adjust blade height does not stay put throughout the cut. The knob rotates as the saw vibrates and settles with the habdle in the downward position causing blade height to change during dado cuts. The other problem is that the saw can't be put into an outfeed table because of the way DeWalt has designed the handles
@Damon_Barber
@Damon_Barber Жыл бұрын
I agree, pocket hole jig… and a jig saw for curved cuts. Maybe downgrade the clamps to the HF clamps to save some $$ for a jig saw.
@Mark_T_902
@Mark_T_902 Жыл бұрын
Love the list except the table saw. My reasoning for that is you can get some very inexpensive clamps and track from Amazon and make several jigs for the circular saw that will be just as good as a table saw and a bit safer as you can clamp most pieces and not have your hands near anything. Once you have an understanding of tools and how to use them then I would step up to a table saw. Just my opinion as that is basically what I did as I didn’t have the budget or space for a table saw and the jigs can be hung on a wall out of the way.
@KyleHarrisonRedacted
@KyleHarrisonRedacted Жыл бұрын
I started off with a Ryobi combo kit that came with 2 1.5mah batteries and a charger, a tote bag, a 5 1/2 circular and driver and drill, and included a free tool only pick from a limited selection which I chose a jig saw with (I regret this choice, I’d have been much happier with the multi tool had I had any idea what that thing did). Anyways I walked away with all that for less than $300CAD. I grabbed my old Stanley tape measure and 12” level from when my wife and I were hanging pictures. My next purchase was a speed square with scribe helpers, I went “big budget” with this one knowing it’d last forever and got a beautiful Milwaukee one, a set of carpenter pencils, a set of calipers, and a right edge all for about $70CAD together After building a Saw horse and knowing I was going to be building exterior structures and garden ties, I opted to run out and grab a miter saw next and walked away with a corded Ryobi 10” sliding compound which I really love ❤️ I then took the opportunity to grab a combo square and a set of bessey trigger clamps. Got all that for $250CAD Friend of mine donated to me a 48” empire straight edge 🙏 Just yesterday my first Kreg purchase arrived, which is a rip cut guide for circular saws. Though I hope to grab that DeWalt Table Saw one day, I checked out the Ryobi one and I agree that that fence is trash :( Anyways I’m about $750CAD into this new hobby and I need to start justifying it by building a $35 night stand my wife found on Amazon 😂 Next up on my list of things to get is a proper orbital sander. And I’m thinking the corded Milwaukee has my name on it
@LinoBarraza
@LinoBarraza Жыл бұрын
😂, That $35 nightstand will end up costing you more by building it! My wife has been asking me to buy a new dining room table years ago. Last year I finally got around to building it since it's cheaper than buying it.... Although it was cheaper, it did cost more as I bought more tools I "needed" for the project. Now I will be building a Corona Coffee Table next. That is whenever I have the actual time to buy the materials.
@KyleHarrisonRedacted
@KyleHarrisonRedacted Жыл бұрын
@@LinoBarraza man I hear ya on that haha Trying to find the sheet goods to replicate will almost put me about even But I also find the tools to be a fun investment into opening doors of possibilities, so I don’t count that towards the “building the nightstand” “cost” as it were (if I did, I’d drive myself insane 😂)
@davegravel3740
@davegravel3740 Жыл бұрын
​@@LinoBarrazamaybe cheaper to just buy it made already. But you can make it your own and get much more enjoyment from it. Look up Steve Ramsey's drawer organizer build for the perfect example.
@LinoBarraza
@LinoBarraza Жыл бұрын
@@davegravel3740 I definitely did get that enjoyment. It was a farm table. For the base of the table I did a full char and scraped it off then sealed it. The bottom of the table top, I did the full char as well. The top and sides of the table top I just burned the grain. I did everything similar for the benches.
@KyleHarrisonRedacted
@KyleHarrisonRedacted Жыл бұрын
@@davegravel3740 I agree, and exactly. I can sit here and try all day long to compete with the prices of Amazon, or I can build my family hand made custom stuff that you can't just buy off the shelf made by machines with no love or care. The value is in the sentiment that hopefully outlives me.
@joehanika
@joehanika Жыл бұрын
Don't sleep on the 12v Skil combo kit! My only complaint is that their stand alone tools should be in the 60-80 dollar range. Hope they continue this line.
@DerokLee
@DerokLee Жыл бұрын
Now you just need the wood. That’s another $1000
@bread-gz3rl
@bread-gz3rl Жыл бұрын
11:13 i had one of those, lasted a week before it went up in smoke
@731Woodworks
@731Woodworks Жыл бұрын
Yikes! Thanks for sharing!
@Kilroy72
@Kilroy72 Жыл бұрын
I recently got the Skil table saw. Some KZbin reviews mention that the fence has some play in it. Mine doesn't. It clamps down tight. I'm thinking Skil fixed the problem or those reviewers got bad fences.
@RepTalez
@RepTalez Жыл бұрын
For just starting out, they could save $50 - $100 by just getting a cordless drill without the impact driver. When I started out impact drivers weren't a thing yet and I got by just fine. Spend that $100 on a better saw blade, some drill and driver bits, and sandpaper.
@RyanRoux
@RyanRoux Жыл бұрын
Good video. Out of curiosity, why did you recommend DeWalt cordless over Ridgid?
@MrJacobsHD
@MrJacobsHD Жыл бұрын
Here in the UK, its sad powertools are so more expensive, the dewalt tablesaw alone is around £470 😢
@MRG9280MRG
@MRG9280MRG Жыл бұрын
Yeah in UK we are charged ridiculous amounts for the virtually the same products! $299 is roughly £235 So double the price! It's scandalous!
@darryllozinski3086
@darryllozinski3086 Жыл бұрын
Do you ever use or do any review on Metabo Hpt? 36v line can be used with battery or corded
@conraddubois6150
@conraddubois6150 Жыл бұрын
Where is the recip saw? I started out woodworking cutting out shapes ditch the quick clamps for recip saw. Also one needs to finish the project smooth so a belt sander.
@The-Handsome-Devil
@The-Handsome-Devil Жыл бұрын
Great video as always. Last thing I need is the dust extractor. What do you know about the Wen, I have a small shop ( very small ) and saw one for about 140.00
@BretClements
@BretClements Жыл бұрын
Don't forget a router bit set for the trim router.
@ronswoodshack
@ronswoodshack Жыл бұрын
Another awesome and informative video. Thanks Mighty Matt!
@731Woodworks
@731Woodworks Жыл бұрын
Thank you Lloyd!
@ronswoodshack
@ronswoodshack Жыл бұрын
@@731Woodworks no problem brother.
@3NailsCreations
@3NailsCreations Жыл бұрын
Combination squares
@skatedeath2186
@skatedeath2186 Жыл бұрын
You forgot pencils or some way to mark your measurements... 👍 Great video
@roguejediwil
@roguejediwil Жыл бұрын
Flush cut hand saw
@jimh472
@jimh472 Жыл бұрын
Pro tip: read the manual on that Skil circular saw. I didn't and kept trying to change the depth by pushing the lever in the wrong direction. Thinking the new tool was just being stubborn I broke it. Stupid trumps stubborn every time. :P
@russmartin4189
@russmartin4189 Жыл бұрын
OK. The verdict is in. I got my five tools from Temu in China. Took about a week to get them. This is what I got and what I think. Five rolls of green tape. $5.84. I thought it would be like Frog Tape. It wasn't and the rolls were tiny. A rip off. Ten little flat brushes with blue handles. Smaller than expected, but they were OK for 83 cents. Combination Square, inches, yellow. $5.59. Excellent for the money. Red Aluminum Precision measuring ruler. 12". $7.98 Accurate. Good for the price. Carpenter's Speed Square, Aluminum. 3.99 Worth the money. So, my final verdict is, you have to be careful. Do not buy tape. The rest was fine and arrived in 6 days. They flew it direct to NJ, and then delivered it from there to my house by ground, about 100 miles away.
@russmartin4189
@russmartin4189 Жыл бұрын
Tonight, I got on the Temu site and contacted their customer service via chat. I asked for my money back for the tape, which they refunded to my PayPal account without questions. I will buy from them again.
@vikingroots6850
@vikingroots6850 Жыл бұрын
Jigsaw should be part of this.
@mysticswordsman
@mysticswordsman Жыл бұрын
What about a whole list of jigs that can be made from the tablesaw
@731Woodworks
@731Woodworks Жыл бұрын
Good idea
@strangetamer69x
@strangetamer69x Жыл бұрын
The GRR-RIPPER I think is %100 needed if you have a table saw.
@Sodisna
@Sodisna Жыл бұрын
Milwaukee has a Drill/Impact set for 159 right now. Down from 229.
@731Woodworks
@731Woodworks Жыл бұрын
That's a nice deal!
@juananguiano6396
@juananguiano6396 Жыл бұрын
i found ridgid sliding miter saw 12 duel the new one on clearance for 190 at home depot, is it any good?
@PatrickMatherne
@PatrickMatherne Жыл бұрын
Can you do for the Ryobi/Milwaukee Days? Or a video for the different saw blades? Is the DWS779 being phased out for the DWS780
@731Woodworks
@731Woodworks Жыл бұрын
DWS780 is an "upgraded" version of the 779. Basically you get a cut line with the 780 and not the 779.
@johnernst4171
@johnernst4171 Жыл бұрын
Need a drill bit set with drill bits and screwdriver bits (drills need bits 😁), basic router bit set, and a hammer or mallet.
@larrymartin4915
@larrymartin4915 Жыл бұрын
Matt a long time follower here that has enjoyed your videos. I have noticed that you have shifted from builds to tool reviews. Really miss the builds. Is there a reason for this transition?
@anthonyvincent9990
@anthonyvincent9990 Жыл бұрын
I know ya'lls live stream is about to start so i need your help. The boss Lady told me sunday get your saw table so i did. the Dwe7491 but i can't calibrate the view finder on the tape for the fence. I need it to go an 1/8th to the right but, it's already as far as it will go. is there anyting i can do? never mind i'm stupid. when in doubt read the manual.
@carstenhilbert5472
@carstenhilbert5472 Жыл бұрын
Is it just me or am I the only one who has never used a tape measure in wood working?
@davidkantor7978
@davidkantor7978 Жыл бұрын
You’re not alone. I don’t use a tape measure for woodworking; I use various kinds of rulers, including a folding rule. A tape measure is for carpentry; woodwork is different. But a tape measure is good for other things, as I noted. Also, get a 16-foot tape. The standard that most people use us 25 feet. With that, you are lugging around extra bulk and weight that you hardly ever need. It may be good to have a25-foot tape for when you need it, but for 99% of the time, a smaller tape is much more convenient.
@theadventurebegins7039
@theadventurebegins7039 Жыл бұрын
The one question I have is should one get a 10” or 12” miter saw?
@731Woodworks
@731Woodworks Жыл бұрын
If you have the space and budget, get the 12 inch.
@gmoney1089
@gmoney1089 Жыл бұрын
Using Amazon so Matt can get his percent as an affiliate 😂
@TheCoffeeField
@TheCoffeeField 25 күн бұрын
It takes time and effort to make these videos and you don’t have to click the links or buy using them
@JeffreyMoon1974
@JeffreyMoon1974 Жыл бұрын
These are good recommendations, but if you are a beginning woodworker, then I do NOT recommend either a table saw or a trim router. I say this as someone who, for the first ten years or so of my woodworking adventure, did not own either tool, yet I was able to build some very nice, useful projects (to be clear, I'm not recommending that you wait as long as I did for these purchases). Both of these tools, honestly, can be very intimidating to a newbie. Forget the spinning blades and bits that appear to be coming for your fingers; the noise alone is enough to ruin a good pair of shorts. I would instead suggest, in addition to the circular saw, a jig saw; I know that many dislike them, but with the quality tool and good blades, they can be very useful. I would also point to the HomeMade Modern channel run by Ben Uyeda, who rarely uses a table saw and finds clever ways to cut with the grain, all while making eye-popping modern home furnishings.
@ZealousDragon
@ZealousDragon Жыл бұрын
Where are you getting these blades for $7-8 @4:12 ? And which tooth do you recommend for this? Thank you for what you do!
Tools every woodworker needs | Start Building for under $1000
24:08
Bourbon Moth Woodworking
Рет қаралды 1,2 МЛН
Why Doesn't Everyone Make These 10 Shop Upgrades?
21:14
731 Woodworks
Рет қаралды 275 М.
Running With Bigger And Bigger Lunchlys
00:18
MrBeast
Рет қаралды 121 МЛН
Please Help This Poor Boy 🙏
00:40
Alan Chikin Chow
Рет қаралды 23 МЛН
iPhone or Chocolate??
00:16
Hungry FAM
Рет қаралды 46 МЛН
The joker favorite#joker  #shorts
00:15
Untitled Joker
Рет қаралды 30 МЛН
The First 5 Power Tools Every Beginner Woodworker Should Buy
12:44
731 Woodworks
Рет қаралды 779 М.
I Found an INCREDIBLE Woodworking Tool with a Unique Feature!
15:04
731 Woodworks
Рет қаралды 75 М.
5 Beginner Woodworking Tools I Regret Buying
15:12
John Malecki
Рет қаралды 1,6 МЛН
99% of Beginners Don't Know Which Clamps to Buy and AVOID!
14:00
731 Woodworks
Рет қаралды 129 М.
Beginner Woodworking Tools to Avoid: Watch Before You Buy!
12:29
Biscuit Tree Woodworks
Рет қаралды 210 М.
The Haters Will Love These 5 RYOBI Tools!
12:34
731 Woodworks
Рет қаралды 506 М.
What Tools Do You Need to START Woodworking? Beginner Woodworking Tool List
19:27
99% of Beginners Don't Know These 5 Mistakes Ruin Wood!
12:21
731 Woodworks
Рет қаралды 1,3 МЛН
99% of Beginners Don't Know the Basics of Router Bits
22:13
731 Woodworks
Рет қаралды 986 М.
I Found the Best Table Saw for Beginner Woodworkers on a Budget!
13:06
Running With Bigger And Bigger Lunchlys
00:18
MrBeast
Рет қаралды 121 МЛН