Tap to unmute

Cura Slicer V4.9 plus Cura Arachne Engine Sneak Peek

  Рет қаралды 72,243

CHEP

CHEP

Күн бұрын

Пікірлер
@redrocket23
@redrocket23 3 жыл бұрын
I’d just like to thank you chuck. Your tips, guides, reviews, and everything in between is what has helped me come into this hobby. I absolutely love it and I wouldn’t be able to get into and enjoy 3D printing without the help of your videos.
@fractalengineering
@fractalengineering 3 жыл бұрын
That Arachne beta is outstanding; it's been my primary version since it came out. I print a lot of tiny functional parts with intricate features and this variable line width is doing a fantastic job at cleaning up the path. Works just as well as S3D in many cases. Very excited for the merge
@BenChilds
@BenChilds 3 жыл бұрын
As a guess, the odd infill pattern on the cylinder may be due to the old engine trying to solve the infill along either X or Y as much as possible (Sensible to only move one axis at a time as much as possible to prevent inaccuracies with material placement). It then looks like it's trying to approximate by "Squaring the circle" as much as it can instead of tracing the arc. If you look closely, one part of it has it doing parallel lines until it gets infeasible to continue due to the narrowness of the direction of travel (Possibly controlled by minimum infill length settings) then the less dominant axis takes over and it can more readily trace the curve until it reaches the other side and it goes back to it's funky ways. I see this as being a huge improvement: Time saved for more efficient tracing. Les vibration introduced on model because it's not doing so many direction changes - less chance for a tall model to work itself loose. More efficient use of material / less chance for blobbing from over extrusion. EDIT: Less retraction so less chance of extruder breakage of filament.
@JohnKlosner
@JohnKlosner 3 жыл бұрын
Resaving as a .3mf instead of .stl file has fixed the zigzag line issue for me as well. Just a handy tip for everyone on old versions.
@dadmezz4024
@dadmezz4024 3 жыл бұрын
Thank you Chuck. I like that you back illustrate some options for those of us who are reluctant to update to newest versions of Cura and have missed a few options. I have a V15 and a newer version 4.1 to play with if I need it. Your reviews help a lot for this reluctant user.
@mcorrade
@mcorrade 3 жыл бұрын
wow CHEP thanks a million. I just used the new beta engine and the difference is crazy good. Not only do the prints come out way better but also a bit faster at least the few tests and real world prints I've done! 4.9 with the new engine is the way to go!!!!
@toddcoello6461
@toddcoello6461 3 жыл бұрын
Thank you for renewing the infill thing..
@signalrk
@signalrk 3 жыл бұрын
The things I can do with per model settings has been amazing. Thanks for the original info and continuing to educate about it!
@TheRock-22
@TheRock-22 3 жыл бұрын
I have to say that I really like your video's , they are well displayed with the zoom so we can see properly and you get to the point with no long boring stories. Thanks
@MrBaskins2010
@MrBaskins2010 3 жыл бұрын
This new slicer engine which I have been using in alpha for almost two months on both my machines is incredible. Faster slice times and higher quality prints all around
@soggynode
@soggynode 3 жыл бұрын
Nice preview for the upcoming Cura. I like that new line type mode, especially the seams. I use the support blocker feature a lot when I'm testing new functional models. I change the blocks to a cutting mesh and adjust the settings so I can turn off features I don't want to print. Saves hours of printing and meters of filament when you're trying to fine tune the size or shape of a particular feature in a model. Great content as always.
@andrzejpolny3427
@andrzejpolny3427 3 жыл бұрын
6:50 woah, finally. I really hated that weird infill
@3rdpig
@3rdpig 3 жыл бұрын
Good info, thanks. The new engine should help. Try creating a flat disc say 25mm in diameter with a 5mm hole in the center, one layer high. Slice it in Cura with concentric lines and look at it. Then slightly change the outer diameter, say to 27mm and slice again. Cura has a lot of trouble getting this right, you have to tweak the line width each time you change the outer diameter if you want a nicely printed flat disk with no overlaps, zig zag lines or missing lines.
@havenview
@havenview 3 жыл бұрын
The crushed inner walls issue is often caused by the mathematical discrepancies that processors have with floating point numbers. When you code with floating point you cannot properly use the "equals" operator, you use programming techniques to effectively ask "near enough equal to" The work around is often to drop the inner line width by a really small value, say to 0.39 or 0.38 instead of 0.4 This will make near zero difference to the amount of filament extruded for each section (and they are inner walls anyway) but it will spoof the slicer into thinking the final inner wall is "near enough equal to" the available space in the model
@sysghost
@sysghost 3 жыл бұрын
Just tested Cura's Arachne Engine version. It's a huge improvement on walls. It also finds better spots for the seam
@JohnSmith-gt7tg
@JohnSmith-gt7tg 3 жыл бұрын
Great video, thanks! Those messed up inner walls are the main cause for stringing when I print with TPU, so I'm really looking forward to the new engine.
@kendokaaa
@kendokaaa 3 жыл бұрын
Being able to see the seams will be really useful. I normally have to enable coasting to have a visual representation of it
@TYGAMatt
@TYGAMatt 3 жыл бұрын
That's exactly what I do, so yes, being able to see the seams will be great
@ScottLeslie
@ScottLeslie 3 жыл бұрын
Any very detailed, yet quick video! Thanks
@dbcrypto6142
@dbcrypto6142 3 жыл бұрын
Ive been using 4.9 for a month or so and no issues yet
@s8nlx661
@s8nlx661 3 жыл бұрын
Apparently alot of the reason for this new release was because of the large request for Mingda profiles, rightfully so. The rock 3 pro is hands down the best printer on the market. I was blown away by how good it was. I've got every great budget printer (ender5 plus, cr10s pro v2, artillery x1 v4, cr6 se etc) and it absolutely blows them all away. Super impressive machine and glad to see it getting a well deserved spot in Cura. Can't wait for the new cura 4.9 cus the 4.8 was packed full of bugs. Thanks Chep for another great video!......and P.S. Chuck please give the Mingda Rock 3 Pro a review. You'll definitely love the printer, truly top notch.
@ProgrammerEA
@ProgrammerEA 3 жыл бұрын
I think this will be best version on of CURA Slicer.
@dave_strada
@dave_strada 3 жыл бұрын
Awesome! We waited for these features for soo long...
@aarondavalon8985
@aarondavalon8985 3 жыл бұрын
Deeply appreciate this informative video, cura is my go-to slicer.
@ubergeeknz
@ubergeeknz 3 жыл бұрын
That's interesting. I've definitely had problems printing thin walls (1 line width) on Cura due to this behavior and could not figure it out. Other slicers didn't have the same problem. Trying to make the wall a bit thicker always resulted in other strangeness. I'll have to try the same prints with arachne engine and see how it goes 👍
@KarriKoivusalo
@KarriKoivusalo 3 жыл бұрын
I once had that issue line width more than double the print time of a piece, good thing it seems to be sorted out.
@ThysaniaAg
@ThysaniaAg 3 жыл бұрын
Thanks for the review and observations! Really interesting and useful!
@cam-joh
@cam-joh 3 жыл бұрын
great video! The new slicer engine Arachne is actually pronounced "A-rack-knee" like the Greek myth about the spider seamstress; pretty fitting name for a slicer that weaves filament together to create a finished piece.
@avejst
@avejst 3 жыл бұрын
Great news Thanks for sharing your experience with all of us👍😁
@housinit
@housinit 3 жыл бұрын
Thanks CHEP! Was wondering what had changed in 4.9 Beta. So funny how people can only say the name Arachne right about half the time. Really interested to see if you make any changes to your Magic settings for Creality. I use the CR-10 v1, modified a bit, but your settings are an awesome starting point.
@omniderb8563
@omniderb8563 3 жыл бұрын
I’ve been using Cura 4.9 for a few days. Very happy with it so far. However, I find problems with Custom Supports, Cylinder. Cannot change support pattern or density. When I choose custom supports, the support menu opens up so that I can make changes, but the changes don’t have any effect on the supports.
@fierceflyer5
@fierceflyer5 3 жыл бұрын
Very helpful video as usual. Thanks
@MCsCreations
@MCsCreations 3 жыл бұрын
Pretty interesting indeed, Chuck! Thanks a lot! 😊 Stay safe there with your family! 🖖😊
@ronm6585
@ronm6585 3 жыл бұрын
Great info. Thanks for sharing.
@sfrskz
@sfrskz 3 жыл бұрын
That solid layer will leave a mark i think
@Chrissi33004
@Chrissi33004 3 жыл бұрын
Finally a new engine for Cura! I really hate the quirks of the current one Like the zigzag you showed Or the non-printing of thin (sacrificial) layers And similar
@colinfielder6695
@colinfielder6695 3 жыл бұрын
Great review Chuck, does Cura have a profile for the new Naomi 3D Print Mill?
@stevemay4180
@stevemay4180 3 жыл бұрын
Tried out Cura 4.9, was ok with it till I noticed something out of the ordinary. Was setting up after installing Micro-Swiss direct drive. What I noticed was when printing my extruder temperature was changing. My PETG runs at 240C, that's how I set it. About 2 minutes into the print it went to 260C then after awhile to 255C. I thought I had wxtruder problems. I changed... hotend, main logic board. to no avail. Out of the clear blue I edited the gcode, guess what... it was changing my temperature. So I edited out the changes and its ok. How Come? This was on the Cura XYZ Cube. Any ideas>
@Chriss_Workshop
@Chriss_Workshop 3 жыл бұрын
Does the beta also add more printers to their supported list? Like the slew of ender 3 types that have popped up lately, or the cr-30?
@smorris12
@smorris12 3 жыл бұрын
I wonder if the new engine is rendering in G-code curve commands to lose the stuttered inner lines? I've been using ArcWelder (thanks for the heads up on that one, Chuck!) and it's been noticeably strimming out a lot of straight line G-code.
@JelleSpijker
@JelleSpijker 3 жыл бұрын
No, we don't generate G2 and G3 commands with Arachne. All paths generated by Arachne are still G0 and G1. They're are now only positioned differently and they can vary in line width along a path, so these fill the shape more efficiently.
@smorris12
@smorris12 3 жыл бұрын
@@JelleSpijker Fascinating. Thankyou for the insight. As a software engineer I've often wondered how Cura deals with such downscaling
@macEboy
@macEboy 3 жыл бұрын
Thanks Chep!
@omniderb8563
@omniderb8563 3 жыл бұрын
Thank you for the great informational video. How can I make Cura 4.9 open with the same front view everytime? Pulldown menu/view/front view.
@mannybhogal
@mannybhogal 3 жыл бұрын
Is their an option to select ender 3 v2 as printer now.
@mattlogue1300
@mattlogue1300 3 жыл бұрын
You didn't talk about the two new buttons under support blocker
@JelleSpijker
@JelleSpijker 3 жыл бұрын
Those are plugins and not distributed with Cura.
@marcofranzini8610
@marcofranzini8610 3 жыл бұрын
Dear "CHEP", I have tried the arachne alpha edition, and I appreciate the afforts Ultimaker team made. Specifically the inner walls are clean, without zig-zag. But there is another point: THE SKIN IS ABSORBED IN INNER WALLS IN THE time info preview. Generally is a much better engine because require less acceleration, and less retraction, and the quality and time of the printer are highly impacted. It will not implemented in the 4.9
@williamhargraves8813
@williamhargraves8813 3 жыл бұрын
I've been using cura 4.9.1 for the last few weeks and is pretty simple to use I have only had a few failed prints and most of the time it was machine error, like the plastic extruder breaking and or poor quality filament
@hydromakers
@hydromakers 3 жыл бұрын
In Ideamaker! and in per-layer setting you can set the (top surface wall line count to 1, regardless of the previous wall line count). How can i do the same thing in Cura? Thank in advance.
@Burak0015
@Burak0015 3 жыл бұрын
Hey Chep, I am using an ender 3 pro for a while I upgraded extruder, board and bed however I have a problem and I cannot fix it. I calibrated everything filament, extruder, esteps however none of them could fix my problem my problem is whenever I try to print something with a moving part. parts always fuse together. I made tolarance test but it could only pass 0,5, 0,4 and stuck at 0.3 any suggestion what I can do to fix this? When I decrease extruder multiplier it makes it possible to move 0.3 however it also makes the print weaker so I do not think that is a solution.
@FilamentFriday
@FilamentFriday 3 жыл бұрын
Sounds like overextending but you calibrated so I’m not sure.
@johngrossnickle8874
@johngrossnickle8874 3 жыл бұрын
How do you get the toolbar on the left of cura? Only had my ender 3 pro and cura a week so still learning....Love your video content.
@aaronsteers
@aaronsteers 3 жыл бұрын
I don't see the option to add the support blocker? Is there a setting that hides/unhides that?
@drxym
@drxym 3 жыл бұрын
I've always thought Cura was more powerful than Prusa Slicer and a bit more organized but god is it slow. Slow to start, slow to slice and memory heavy. I find myself using Prusa simply because is so much quicker to do something. The main thing I like Cura for is tree supports so it has that going for it.
@oimate3
@oimate3 3 жыл бұрын
Do these newer versions support the sidewinder? I got cura 4.6 working well with mine and not sure if I want to change things up
@drew899
@drew899 3 жыл бұрын
Hey chep, is there any reason that the tolerances in my prints got messed up when I switched to a .6mm nozzle, I set cura to .6mm nozzle but it was like it was still printing through a .4mm
@cache4pat
@cache4pat 3 жыл бұрын
Awesome Video
@mcorrade
@mcorrade 3 жыл бұрын
Chep hi, don't know if this is a bug or a setting in the new Cura Beta engine, but when I eject the flash card after completing the slice it shuts down the program where the version 4.8 simply ejects the card.
@remcoburema7001
@remcoburema7001 3 жыл бұрын
This is indeed a known issue, should be fixed for 4.9.0-final (maybe 4.9-beta as well, but I'm not in a position to look that up easily right now).
@siddhesh_bhogle
@siddhesh_bhogle 3 жыл бұрын
hey my CURA 4.8 version not showing simulation preview at bottom, how to enable this setting? I already tried to reinstalling it but problem still persists.
@ToastbackWhale
@ToastbackWhale 3 жыл бұрын
"It automatically goes into line type" What has yours been going into? Mine has done that for a long time now...
@JelleSpijker
@JelleSpijker 3 жыл бұрын
The default was material. But it remembers the last one you visited. It is really more to help us developers. wlwe got a bit tired of asking to switch to line type, when someone reported or asked something. A lot of new user's didn't know you could switch and often shared screenshot that were a bit harder to comprehend, because you didn't see the type of lines.
@vansrvaccessoriesinc.9817
@vansrvaccessoriesinc.9817 3 жыл бұрын
I have two file that I print with a ender 3 pro I was wondering if I could send you my files to look at an see why it take so long to print. I have watch most of your video and it help some, Am i using the right printer, pla , temp....Thank you
@rc4625
@rc4625 3 жыл бұрын
I have an issue when i change the infill for certain parts of the print. The part that doesn’t have the support block is fine. But the part where the support block is. There is a gap between the walls and the infill. I saw in your preview in cura that you have the same issue. Has anyone over come this?
@HumbleSaltFarmer
@HumbleSaltFarmer 3 жыл бұрын
Did it fix the issues that 4.8 had? Like layer inconsistency/gaps?
@javelinexile
@javelinexile 3 жыл бұрын
This version popped up as an update and I installed it. The line type selection for Starts isn't there in fact where the drop-down where it says line type instead is it says compatibility mode. Maybe because this file was sliced in Cura 4.8 Before?
@FilamentFriday
@FilamentFriday 3 жыл бұрын
Under preferences > general. Check if compatibility mode is enabled.
@javelinexile
@javelinexile 3 жыл бұрын
@@FilamentFriday yes thank you it is. This is an older machine and my Quatro video card doesn't support the right flavor of OpenGL
@AndrewAHayes
@AndrewAHayes 3 жыл бұрын
Chuck when I start a print my BL Touch probing starts but the nozzle is in the position where the probe should be, is this because I have the APPLY EXTRUDER OFFSETS TO GCODE set to positive on the page where you set your start and end Gcode in Cura or is it the firmware that has been set incorrectly?
@SolBro2
@SolBro2 3 жыл бұрын
That would be in your firmware. I just upgraded to a bl touch and that's where I had to adjust for the x y probe distance in marlin.
@LenordeFPV
@LenordeFPV 3 жыл бұрын
This new engine looks really promising! Did they optimize the printing order to reduce travels ? I feel like I see some nonsense travels sometimes...
@Crazyates11
@Crazyates11 3 жыл бұрын
There are two options you can search for: “Optimize wall printing order” and “Infill travel optimization”
@LenordeFPV
@LenordeFPV 3 жыл бұрын
@@Crazyates11 Thank you! I already use both options. But when slicing a cylinder for example, it will start the skirt from one side, then it will travel to another side for the cylinder walls, and finally a third travel for a feature next to the cylinder. All of these travels could be greatly reduced if it starteed from the same point of the circle everytime. On more complex shapes, it is even more obvious to see the nozzle travel from one side to the opposite, then coming back almost next to the first point...
@JelleSpijker
@JelleSpijker 3 жыл бұрын
We worked on the algorithms for generating and placing walls with variable line widths. A side result is that these might now be open lines and not closed loops. That could mean that you will see a slight increase in the number of travels. But keep it mind that the total time a printer travels is nothing compared to the time it actually print. So optimizing these moves won't bring that much time reduction. While optimizing wall line placement will bring greater print time reductions.
@LenordeFPV
@LenordeFPV 3 жыл бұрын
​@@JelleSpijker Thank you for this explanation! I just tried Arachne, and it is awesome for cylindrical parts. Even with these additional travels for open lines, the print time is reduced because the infill is much more efficient. I was pointing out the starting point of a closed loop that is sometimes far away from the last printing head position. The goal would not be to reduce the printing time but rather the impact of oozing/stringing. When it crosses the whole print, it can leave material at an undesired location. My example is very specific, and I'm still not an expert in 3D printing, so I don't know if this case is really an issue. Also, if I understand correctly, it is not possible to "see in the future" and look at the next feature to print before deciding where to start a loop.
@JelleSpijker
@JelleSpijker 3 жыл бұрын
Yes, absolutely correct there are more benefits then just a print time reduction. But unfortunately we have to prioritize what we work on and since there are already measures in place to reduce oozing, travel optimization is a bit lower on our backlog. Especially since these types of problems are hard to solve for all scenarios. But these are also the interesting math problems to solve, so no worries we developers will ofcourse try to optimize them anyway.
@qwer.ty.
@qwer.ty. 3 жыл бұрын
Thanks !!
@angelinajoy3084
@angelinajoy3084 3 жыл бұрын
Where I can send some picture with my 3D printing for a model. I am not sure what I do wrong on Cura but the model is not looking good.
@jameswiz
@jameswiz 3 жыл бұрын
Would you be willing to look at a Marlin config for me please? Im trying to help someone else and their BLtouch doesnt seem to be working. I don't see an issue and would like another set of eyes.
@gadjetsvideo
@gadjetsvideo 3 жыл бұрын
Great video but unfortunately 4.9 just crashes on my PC whenever I open a file..... back to 4.8 I suppose!
@alanloosley3262
@alanloosley3262 3 жыл бұрын
Would you recommend Ender three max for beginner thank you.
@13FPV
@13FPV 3 жыл бұрын
Hey Chep! I am trying to port my cura profiles from 4.6.1 to 4.8 but the profiles only work when I click on a higher nozzle size. This happens with all versions higher than 4.6.1. I would like to update but I need to port my profiles! Any idea?
@FilamentFriday
@FilamentFriday 3 жыл бұрын
Never heard of that. My transferred fine.
@13FPV
@13FPV 3 жыл бұрын
@@FilamentFriday When I import the profile, I get this warning. Warning: The profile is not visible because its quality type 'draft' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type.
@hydromakers
@hydromakers 3 жыл бұрын
Why do you haft search for seams
@eduardobarros6562
@eduardobarros6562 3 жыл бұрын
Is it just with me or people are also having a problem which is right at the start of the print, cura sets the temperature back to 0 for both extruder and heatbed. Also I dont have proof but I think it might be causing my printer to jam, the fillament melts up the heatbreak and solidifies there. I didnt have this after I started printing with the SD card and lubricated the fan. Idk if its related yet.
@neillandscape1376
@neillandscape1376 3 жыл бұрын
Installed 4.9.1 a while ago and now it decided it wont run, cx_Freezes:Python error message. Deleted all folders after uninstalling and still does the same after new install.
@mikepowers9486
@mikepowers9486 3 жыл бұрын
Anyone know how to make the raft bigger? I can't seem to figure it out with 4.9.1
@bortasha
@bortasha 3 жыл бұрын
Do you mean wider? I thing "raft extra margin" will do it. After you click on "raft", it is the first option.
@Spyderman500
@Spyderman500 3 жыл бұрын
Hey Chuck, have you heard anything about Ultimaker making Cura a subscription slicer? I guess Jurgen Von Hollen made this comment during a press conference a few months back.
@remcoburema7001
@remcoburema7001 3 жыл бұрын
Can't say much more than 'don't worry' at the moment. Cura itself is going to remain open source, free, and usable without an account.
@israelSalles
@israelSalles 3 жыл бұрын
Já tem a confirmação da Two trees bluer, imprimi usando o novo cura mesmo com o perfil deles, não ficou bom.
@mkuebbeler
@mkuebbeler 3 жыл бұрын
Looks like Prusaslicer now
@crashlaw
@crashlaw 3 жыл бұрын
Keep Wall Thickness, Wall Line Count and Top/Bottom Thicknes.. and add infill...
@stevenm1954
@stevenm1954 3 жыл бұрын
This question is unrelated to the video but thought someone here might know the answer. My ender 3 max has been working great but when I try to print any new or existing projects it will not go to center of bed it wants to print in the home corner. I am not sure if clicked on wrong button or reset something I shouldn't have. Any suggestions would be great.
@FilamentFriday
@FilamentFriday 3 жыл бұрын
Did you set the dimensions of the bed in the machine profile of your slicer to match the Max bed?
@stevenm1954
@stevenm1954 3 жыл бұрын
@@FilamentFriday I figured it out I somehow clicked on origin of center in my printer profile. I unchecked it and now it works. New at this 3d printing stuff so still learning but thanks for the reply.
@CanadianJedi
@CanadianJedi 3 жыл бұрын
Just updated to 4.9 but I am still getting these little jagged zig zag sections. Any other solutions?
@brunodherrera
@brunodherrera 3 жыл бұрын
yeah me too, change "Wall Line Count" for a higher number, I tested this with a part just like the one he shown, and I had that setting with 2 lines, when I changed it to 3 like he has in the video, it got fixed, so add wall lines until you don't have that issue anymore I guess, he also mentioned line width, so try that too
@CanadianJedi
@CanadianJedi 3 жыл бұрын
@@brunodherrera worth a shot. Cheers
@yvesinformel221
@yvesinformel221 3 жыл бұрын
the fix is not with version 4.9, but with the new Arachne engine that will probably be included in version 5.0
@mikin.6595
@mikin.6595 3 жыл бұрын
Tha man! :)
@bruceyoung1343
@bruceyoung1343 3 жыл бұрын
Hmmmm. Thank You
@Rebar77_real
@Rebar77_real 3 жыл бұрын
DM's will have fun scrutinizing die for thicker infilled sections with x-ray scanners.
@davidjohnson8474
@davidjohnson8474 3 жыл бұрын
I hope you can help....Im getting an ender 3 max and wondering what would be a good laptop? I have a Chromebook but dont know if it will work or should I get a another laptop? Im a HP person
@The_printer_guy
@The_printer_guy 3 жыл бұрын
how much $$ You have to spend?
@davidjohnson8474
@davidjohnson8474 3 жыл бұрын
@@The_printer_guy $500
@The_printer_guy
@The_printer_guy 3 жыл бұрын
@@davidjohnson8474 it would be hard to get something good in this kind of money, if you want only to slice the files i would look for dell laptops with quadro graphics + 8/16 GB of RAM and i5/i7 procesors but the used ones
@johnkemper1581
@johnkemper1581 3 жыл бұрын
Thanks for the 4.9 beta review. I have installed 4.9 and have a question about the Color Scheme menu. My Color Scheme menu does not show the "Starts" option plus it has two other options which are "Only show top layer" and " Show 5 detailed layers". (These two options are also shown in 4.8) Also, a header at the top of the Color Scheme list says " Compatibility Mode" Anyone have any idea why my Color Scheme menu is different? And if possible, I would like to find out why I only have the vertical scroll bar when I am in the Preview screen. I have never had the horizonal animation bar in 4.8 and now in 4.9 I have researched some threads on this subject but have not had any success. I thought it was because I only had a cpu chip based GPU, but I recently Installed a Nvidia GPU but Cura still doesn't give me the animation option. (Note, I have set up the Nvidia software so Cura uses the Nvidia GPU.)
@FilamentFriday
@FilamentFriday 3 жыл бұрын
Could be your graphics card is too old.
@johnkemper1581
@johnkemper1581 3 жыл бұрын
@@FilamentFriday Maybe. My son gave me the graphics card. It is fairly old, but as far as performance its pretty powerful and has 4 GB of onboard memory. However, it might not support what ever function Cura needs. Do you know what video card is in you system?
@FilamentFriday
@FilamentFriday 3 жыл бұрын
I use a Mac so not sure.
@johnkemper1581
@johnkemper1581 3 жыл бұрын
@@FilamentFriday I found the setting that was forcing the "Compatibility Mode" I referenced above. Under "Preferences" / "General" there was a setting called "Force layer view compatibility mode" . On my installs of Cura, that line item was selected. I unselected that item in both my 4.8 and 4.9 installs and now I have the horizonal animation bar and all the "Line Type" menus are correct. Yea!
@rainbow3d
@rainbow3d 3 жыл бұрын
Are you going to release new profiles for Cura 4.9? I lost mine changing versions....
@FilamentFriday
@FilamentFriday 3 жыл бұрын
I might. Still working on it. 4.8 should load.
@rainbow3d
@rainbow3d 3 жыл бұрын
@@FilamentFriday I'll see if it does, I'll update later.
@rainbow3d
@rainbow3d 3 жыл бұрын
It seems to have no problems, the files imported just as usual.
@חןביטון-צ1ד
@חןביטון-צ1ד 3 жыл бұрын
What to buy ender 3 v2 or cr 10 mini?
@FilamentFriday
@FilamentFriday 3 жыл бұрын
V2. Mini is a bit old.
@DarylKLR650
@DarylKLR650 3 жыл бұрын
Why does he have 2 extra selections on the left side of the Cura screen ?
@MechTechMax
@MechTechMax 3 жыл бұрын
Plugins. One of them might be custom supports, not sure on the other.
@FilamentFriday
@FilamentFriday 3 жыл бұрын
I explain them in previous videos. Their plugins. kzbin.info/www/bejne/pajKhqCHltRlg6c kzbin.info/www/bejne/emWYlnyepLyGr8k
@DarylKLR650
@DarylKLR650 3 жыл бұрын
@@FilamentFriday thanks man must have missed that vid
@bortasha
@bortasha 3 жыл бұрын
Since my upgrade to Cura 4.9.1 I have not been able to print anything - nada, zilch, nothing! I have leveled the bed very many times, even bringing the nozzle closer than I usually do. Nothing will stick! Cleaned print bed, used glue. Nothing will stick. It seems that the nozzle is to far above the bed on the first layer. I checked Z offset = 0. Any recommendations or settings I should check? Very frustrating because I was printing fine before.
@bortasha
@bortasha 3 жыл бұрын
After further investigation, my problem doesn't seem related to Cura. Just a coincidence that it started at the same time as the new Cura download. Can't print my old files either. It is a mystery to me.
@tristanmarquez1
@tristanmarquez1 3 жыл бұрын
Were you ever able to find what happened I'm having that same issue.
@FilamentFriday
@FilamentFriday 3 жыл бұрын
Are you using a filament that has absorbed too much moisture? Try another filament.
@MrBortxx
@MrBortxx 3 жыл бұрын
why the full layer at infill change?
@NLGeebee
@NLGeebee 3 жыл бұрын
Maybe to make sure that the new infill lines are supported?
@StumblingBumblingIdiot
@StumblingBumblingIdiot 3 жыл бұрын
When you select settings you can add the BOTTOM LAYERS option and set it to 0 and/or the TOP LAYERS also. Be careful that the lower or upper layers can support what you are doing though or it may fail, spectacularly ;)
@JelleSpijker
@JelleSpijker 3 жыл бұрын
Per default the wall and skin are set to 0 for the modifier. CHEP removed these from the modifier, so it generated them as specified in the global settings.
@volanel1129
@volanel1129 3 жыл бұрын
Ciao e possibile sapere Setting for tpu??
@remcoburema7001
@remcoburema7001 3 жыл бұрын
You'll have to change the material to TPU in the drop-down menu in the top middle of the screen in 'Prepare' mode. Once the material menu is open, go to 'Generic' and select TPU 95A, or something else applicable (if you know the brand for example). Materials for more specific brands can be downloaded from 'Marketplace' (the button in the top right corner, next to sign in ... you won't need to sign in. Menu may take a while to load. If it doesn't show up, check if it's the right diameter.).
@CollinBaillie
@CollinBaillie 3 жыл бұрын
Thumbs up, if you watched both videos!
@artineogda
@artineogda 3 жыл бұрын
Whether the project is no longer being developed?
@makewithmegma
@makewithmegma 3 жыл бұрын
❤👍
@mattlogue1300
@mattlogue1300 3 жыл бұрын
God I wish you could change those colors. Red is terrible eye strain
@1QKGLH
@1QKGLH 3 жыл бұрын
I downloaded 4.9 and man do I ever have serious zits all over my prints. inner wall, outer wall. Everywhere. Nothing I do gets rid of them.
@Clell65619
@Clell65619 3 жыл бұрын
Hmm. A goatee? Chep from a mirror universe?
@robbinkoot2154
@robbinkoot2154 3 жыл бұрын
The thing with the block, that you change (in this case changing infill in a specific area), that's not new. It's more than a year old
@JelleSpijker
@JelleSpijker 3 жыл бұрын
That functionality has atleast been present since 3.0 maybe even earlier
@FilamentFriday
@FilamentFriday 3 жыл бұрын
I never said it was new. I said a lot people asked where it was in v4.8 so I showed them in 4.9 since it’s the same. Watch again. I also included a pop up link to my original details on the feature in my video from 2 yes ago: kzbin.info/www/bejne/Z5-ln4mqhKp0n7s
@dennisdecoene
@dennisdecoene 3 жыл бұрын
Prusaslicer is always ahead.
@greektechftw1174
@greektechftw1174 3 жыл бұрын
Arachne means spider in Greek language
@shorb2289
@shorb2289 3 жыл бұрын
Arachnid
@remcoburema7001
@remcoburema7001 3 жыл бұрын
The naming scheme for Cura and libraries is moslty Greek/Roman mythology. Arachne is named after the myth, where a 'boastful' woman got turned into a spider by the godess of weaving (think it might be Athena) for daring to win(?) in a competition against her.
@3D_Printing
@3D_Printing 3 жыл бұрын
Soon A.I. to do some donkey work I hope
@Paul_______
@Paul_______ 3 жыл бұрын
More beard please
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Quick Fix to Eliminate Stringing on your 3D Prints
5:59
Faulty Ubiquiti POE Network Switch | Can I Fix It?
31:22
Buy it Fix it
Рет қаралды 51 М.
Stop Ender 3 Stringing with this One Weird Trick! (ok but seriously)
15:30
Cura Fuzzy Skin and Ironing on 3D Prints
6:19
CHEP
Рет қаралды 761 М.
(How) I finally got rid of these blobs!
7:47
CNC Kitchen
Рет қаралды 946 М.
Smoother 3D Prints in Cura Slicer 4.11 without Ironing!
5:34
Auto Generate 3D Prints using Tinkercad Code Blocks
10:40
Everything’s Gonna Be Fine!
7:59
TechLinked
Рет қаралды 291 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН