This was extraordinarily welcoming and quite the demonstration of expertise with seeming ease. Thank you.
@axminsterАй бұрын
Thank you for your kind feedback and thanks for sharing 🙂
@KnTAdventures79116 күн бұрын
Thank you for including details like the lathe speed, position of the tool guide relative to center line, and the tool angle. Much appreciated and VERY helpful for a novice!!!
@axminster13 күн бұрын
Very welcome! Thanks for watching 🙂
@canardman1119 күн бұрын
Great video! I'm a new turner, I don't really have anyone to teach me. This was exactly what I was looking for!
@axminster17 күн бұрын
Thanks for your feedback and glad to hear you found it useful. Good luck with your turning 🙂
@MrMaddawggАй бұрын
This the best video I have seen so far that is geared towards the novice. Thank you for your help!
@axminsterАй бұрын
Thanks for watching and glad to hear you found our video helpful 🙂
@michaeldicerto626529 күн бұрын
THANK YOU! Newbie turner and that was very very educational.
@axminster26 күн бұрын
Glad it was helpful! Thanks for watching 🙂
@christined.37282 жыл бұрын
I'm not even done watching this video yet and this is by far the most excellent video explaining each tools' usage that I've seen yet. I'm brand new to turning so this is exactly what I needed--thanks!
@garychurchill36203 жыл бұрын
Why can't everything be this good. Loved the video, explained so clearly and the video'ing is just spot on. Well done and Thank you!!!
@bobpritz77803 жыл бұрын
I absolutely agree, Gary! So easy to understand and demonstrated, that it was very easy to go to my lathe and actually have confidence and success.
@mandardk2 ай бұрын
One of the best videos I have ever watched!! As a beginner, this video helped me clear a purpose of each tool. Extremely helpful. Thank you!!
@axminster2 ай бұрын
Glad to hear you found this tutorial helpful! And thank you for the kind feedback 😀
@povanator9 ай бұрын
wow, I'm bummed to only be finding this now! perfectly splendid editing and lessons! it's already sped up on the parts that need it. very concise info throughout. I've been turning for a few years off and on and never seen it broken down so properly. thank you!
@andrewr6848 Жыл бұрын
Lathe Tools 101 - This was an awesome and concise video. All my answers in 11 minutes.Thank you for the great and informative video!
@stuartovington3620 Жыл бұрын
excellent video
@honvun80024 ай бұрын
Best!! Thank you !
@patrickmuldowney94078 ай бұрын
Great video
@cinderellaslifeadventures72696 ай бұрын
Thank you i need this detailed video.
@58eltoro10 ай бұрын
Very informative i.ll be watching many more.
@axminster10 ай бұрын
Thanks for the feedback and thanks for watching!
@buddhagreene90103 ай бұрын
Impeccable detail, analysis, and information. Thank you lol. I went into this blind and definitely had my tools mixed up based on labeling
@axminster3 ай бұрын
Glad it was helpful! Thanks for watching
@karlnicholassachse82284 ай бұрын
This is a perfect demonstration for a beginner like me! So glad I came across this video. Thanks!
@lyndaowen2154 Жыл бұрын
Thank you for taking your time and explaining well. Having your camera at that angle, sure helped and seeing what you were saying at the same time. I’m hoping to get a lathe and I think I’ve almost got my husband talked into it.🤞🤞
@janusrokkjr4782 Жыл бұрын
Great video thanks
@milanjosejose99393 ай бұрын
Nice class for the beginners.
@axminster3 ай бұрын
Glad you liked it! Thanks for your feedback
@apachisa252 жыл бұрын
Nice presentation 👏 Lots of tips . Thanks 😊
@chillyspoon2 жыл бұрын
Solid tutorial from a good teacher - thank you
@Liquifly6 ай бұрын
Turned my first cylinder today. Thank you for the instruction.
@axminster6 ай бұрын
Glad you found the video useful. Hope your turning goes well. 🙂
@JoanneStorey-h2q Жыл бұрын
As a beginner I found this the best and most informative video, looking forward to watching more of collins videos 👍
@richardeljay2 жыл бұрын
What a fantastic video. Am interested in getting into Woodturning but a little perplexed by all the elements. This was packed with information, very clear, easy to understand and makes me think I might be able to have a crack at it.
@nicholaskemp2246 Жыл бұрын
I've just bought a lathe. This is the site I needed. Thank you so much.
@robertdunnett50222 жыл бұрын
So impressed with Axminster can’t wait to start my new hobby/ pastime 👍🏻
@ZorinZato Жыл бұрын
This was so clearly and expertly done. Appreciate it!
@axminster Жыл бұрын
Thank you :) Glad to hear you enjoyed this video
@markdinmore97662 жыл бұрын
Great video my wife brought me a Axminster craft AC305WL woodturning lathe now looking for wood turning chisels. I found this video very helpful thank you
@EminHocha3 жыл бұрын
Best and useful video i have ever seen. Ty.
@quirkygreece11 ай бұрын
I haven’t used a lathe since I was at school back in the 1960s, but I’ve recently purchased a very cheap “hobby” lathe from Lidl and I want to start making small stuff, mostly just for fun . . . I like making sawdust! This is a great guide to what chisels I need and how to start using them. Thank you for an excellent, interesting and informative guide to get me started.
@virgiltoepfer70878 ай бұрын
Thanks, 74 yrs old and just getting into wood turning. Bought an old craftsman metal lathe and converting into wood. Haven't turned wood since 6th grade. My new hobby, I hope lol. Appreciate your teaching.
@axminster8 ай бұрын
Hope it all goes well and don't forget our channel features lots of helpful tutorials and project ideas to help you on your journey. Good luck!
@roberthayes2236 Жыл бұрын
Very good demo simple and straight forward
@indianatone21810 ай бұрын
Thanks for putting this vid up ,it really helps as a newbie to this hobby .
@axminster10 ай бұрын
Glad to help and that you found our video useful.
@SandyObradovic10 ай бұрын
great video
@patriotwoodworker60922 ай бұрын
Sir by far the best video out there explaining what each tool does and how to do it. I’m gonna save this and run out to my rockler store and get some new tools. I’ve been using carbide scrapper and round head? Tools and I’m feeling limited.
@axminster2 ай бұрын
You are very welcome, thanks for watching!
@pedalman130 Жыл бұрын
Superb video ! Explains what each tool can be used for, I now know what to buy.
@TimothySensney9 ай бұрын
Yes this is the most amazing video ever thank you so very much for all the great information
@aliparvini21142 жыл бұрын
Absolutely brilliant sir straight to the point ,specially the explanation on the tools and their use, thank you.👍
@rickschuman29269 ай бұрын
I like making skews and chisels for the lathe from vintage firmer chisels.
@anneber1804 Жыл бұрын
Brilliant video. I understand a lot more now. Ill be putting it into practice tomorrow. Thank you
@jamesfisher8194 Жыл бұрын
I teach woods in a High School and I use this video to help the student understand the difference in the tools. Great job.
@axminster Жыл бұрын
Hi James, that's great to hear our videos are helping teach the next generation of woodworkers. Thanks for sharing.
@coatsiecoatsie3 жыл бұрын
Fantastic video.....so clear and very well explained.....thank you
@dlynnhicks2 жыл бұрын
Thanks. I just can't get past the feeling that I am a beginner. Been a little over a year since power and a cleaned up bench. Hoping to get back out and play with my lathe again. Thank you very much!
@paulwest358310 ай бұрын
Thanks, I'm just beginning and any tips or help is much appreciated.
@evanhovorka3 жыл бұрын
Great job! You are quick to get to the point but explain things brilliantly.
@markwoodcock013 жыл бұрын
Fantastic, these videos are a real boost, I am new to Woodturning and thought I would have to wait until COVID had gone before I could buy a lathe and get on a training course, now I can buy my lathe and train on line. Thanks Axminster…
@davidrobinson44349 ай бұрын
Great video. I’m new to lathe turning and this was very helpful information!!
@dianahenderson3777 Жыл бұрын
Fabulous video. Learned so much.
@axminster Жыл бұрын
Glad it was helpful!
@alangreen2774 Жыл бұрын
as a total beginner I found this very informative, well done and thank you and because of this have now subscribed
@axminster Жыл бұрын
Hi Alan, glad you found this video useful and thanks for subscribing 🙂
@LarryDMitchell2 жыл бұрын
Excellent. I especially like the close-up of the business end of the tool and your concise narrative throughout the video. Wish I could give you a 👍👍👍👍👍 on the like button. Greetings from Kentucky!
@stevenmcdaniel17972 жыл бұрын
Literally the perfect video!!
@noiamhippyman2 жыл бұрын
I already know it's not going to be nearly as easy as you make it seem but I'm looking forward to following along once I have my lathe setup. Great video!
@benjaminnorman71512 жыл бұрын
Wonderful instruction. Thank you for the tips and advice!
@kennyc6177 Жыл бұрын
Thanks. Great example of how to use each of the tools.
@duanes6478 Жыл бұрын
Great Job! I purchased a lath a few years ago and finally got around to using it. While purchasing other used tools I acquired about a dozen old lath tools. I have ordered the sharpening equipment for the tools and now I have an understanding of what each tool does. Great job on your video.
@axminster Жыл бұрын
Glad to hear you found this video useful. Thanks for watching :)
@193therman6 ай бұрын
Very informative. I just started turning and to know how and when to use the right gouges was just what I needed.
@axminster6 ай бұрын
Glad it was helpful! Thanks for watching
@ianwoods1384 Жыл бұрын
Hello Sir. Thankyou for sparing us some of your valuable time and showing us great footage, of the things we'll need to know, going forward. You have great skills, thankyou.
@axminster Жыл бұрын
Hi Ian, thank you for your comments, I hope you found the video useful.
@allenperkins7571 Жыл бұрын
Such a great video. I learned more about my tools with this than any other.
@axminster Жыл бұрын
Thank you for your lovely comments. Glad to hear you have found it useful :)
@canbakr56025 ай бұрын
Amazingly informative. Thank you!
@axminster5 ай бұрын
Glad it was helpful! Thanks for watching
@mattparks744710 ай бұрын
Great video. Perfect beginner info thanks
@axminster10 ай бұрын
Glad you enjoyed it! Thanks for the feedback
@lorriebuxton20418 ай бұрын
Been fighting with the skew mine were straight resharpened with an arc works better for me thank you for great video
@paulspencer74013 жыл бұрын
As always so exlanatory, this is really helping my woodturning effort, very grateful, many thanks
@cristinamerritt96973 жыл бұрын
Thanks really helpful video for a beginner like myself!
@theofarmmanager2675 ай бұрын
I’ve been woodworking for over 45 years and turning for the last 20 (?). So, I’m experienced and reasonably skilled. For any newcomers, I can vouch that this is an excellent video with all that you need to know to get good results quickly. If only, it had been around when I started. I’ve downsized my lathe now to an Axminster machine. Looks very much like the one on the video - perhaps a little smaller. Having had a large, much more expensive lathe, I can say that the Axminster does not represent a step down in quality. I have no connection with Axminster other than as a customer of many years.
@axminster5 ай бұрын
Great to hear you enjoyed our video and thank you for your kind words
@capti4433 жыл бұрын
A really excellent demonstration and explanation. Bravo!
@hankvana2149 Жыл бұрын
Thanks very much - this is exactly what I was looking for! I'm not into wood turning but I've bought a set of these chisels and made a tool rest for my metal lathe so I can make small pieces like tool handles. Your explanations of which tool to choose and how to use it are excellent! Learned more in 11 minutes than in watching hours of other videos. Bookmarked for future reference! You've encouraged me subscribe and explore wood turning in more detail. I've too many hobbies as is, so I don't know if I should thank you for that ;) Cheers!
@axminster Жыл бұрын
Hi Hank, Thanks for subscribing and glad you have found our videos useful 😊
@grahamprice3230 Жыл бұрын
Good instructional video .For beginner a bit on mountindpg blanks,centre finding,punching etc.would be good .When using roughing gouge having your left thumb clear of the tool will result in loosing your nail or your thumb .Take care
@bensonmaso484211 ай бұрын
Thanks mate... M subscribing.. I always wanted to do this
@jettkeyser99093 жыл бұрын
Just exactly what I need as a novice…
@derekpercy77873 жыл бұрын
Brilliant Video! You make it look so easy - Thank you so much for sharing
@meealan2 жыл бұрын
Great video, simple clear instructions. Tha ks
@alecjames6476 Жыл бұрын
brilliant tutorial
@AlfamanGarageServices2 жыл бұрын
Got a very expensive s hand wood lathe …not used one since woodwork classes 50 years ago. Your video…very clear….thank you will be watching more of your videos …very instructive. Now looking for a corse to go on.
@randysalmons63012 жыл бұрын
Thanks,new to turning,great help
@pegg1409 Жыл бұрын
Thanks
@knoell33 жыл бұрын
Excellent video! Explained very well without superfluous chatter.
@shaunmcnutt434 Жыл бұрын
Brilliant video on how to use each individual chisel. I hope you dont mind me asking what type of lathe would you recommend to buy ,thanks
@axminster Жыл бұрын
Thanks for your feedback. The are a few things to consider when buying a lathe, watch this video for more information on how to choose a lathe to suits your needs - kzbin.info/www/bejne/gaXUgaGoh8l3jaM hope this helps
@calevel2 жыл бұрын
Thanks! Great tutorial!
@joediberardino4419 Жыл бұрын
Awesome well explained thank you
@petterheim38073 жыл бұрын
Excellent teaching!
@scubadraig4725 Жыл бұрын
Brilliant easy to follow explanation, currently waiting for my aw370
@axminster Жыл бұрын
Glad you enjoyed it, and happy turning!
@waynecaissie9846 Жыл бұрын
That was worth the time👍
@MartynStubbsTBS2 жыл бұрын
Absolutely fantastic thankyou.
@joseluisvalencianotafaner51603 жыл бұрын
Muy buen vídeo, desde Teruel-España
@walkerjames4348 Жыл бұрын
Awesome
@JanWiewiora Жыл бұрын
This movie is verry help full my question how is the best speed lathe for beginners?
@axminster Жыл бұрын
Hi there, the speed of the lathe will be determined by the type of project and ability.
@Zachpathering Жыл бұрын
I’m in school right now and can’t turn up the volume but this video is still great without it
@terrylay60343 жыл бұрын
Thank's for the demo
@marcelrenaut55323 жыл бұрын
Bonjours l'exposé est magnifique dommage qu'il ne soient pas en Français ou sous-titrer, Merci MR.
@in2branding3 жыл бұрын
Good video, thank you.
@neilstubbs45753 жыл бұрын
Very good video. Question; I have a set of Record chisels that doesn't include a parting tool. Why would this be the case?
@MOHAMEDHASSAN-fk9jv2 жыл бұрын
Fantastic tutorial 👍👍👍
@amarghol31173 жыл бұрын
Thank you so much
@rdmilbourn2 жыл бұрын
Great stuff thanks bro
@terrycallow2979 Жыл бұрын
Just about to buy my first 15cm bench lathe do I need smaller bench tools for this lathe? Thank you.
@axminster Жыл бұрын
Hi Terry, here is Colwin's reply: "No, you can use the same size lathe, however, sometimes, especially when bowl turning, you will find the bed can get in the way of the longer handles on bowl gouges. Also the cut from a larger gouge can cause problems with lathes of smaller motors just not having the power to drive through the cut." I hope this helps.
@johnhaste71895 ай бұрын
So the spindle gouge & the skew chisel are the only tools in this set where the tool rest is above center?
@axminster5 ай бұрын
The skew will need to be higher for planning cuts and the spindle gouge can be used just above centre line.
@tonymiddlehurst8438 Жыл бұрын
Not yet got my lathe so please excuse the question. Does it matter which direction the lathe is turning the spindle? I notice you've got it running 'into' the tools, ie anti-clock, rather than 'away' from them.
@axminster Жыл бұрын
Hi Tony, the lathe has to run toward you in order to turn. Hope this helps
@tonymiddlehurst8438 Жыл бұрын
@@axminster Thanks yes I've read a bit more since then and now feel a bit stupid for thinking it could work the other way!
@jakkihambrook30413 жыл бұрын
I want to thank you all. X
@shikamaroii83932 жыл бұрын
Have a nice vid . Good job god bls u sir . From brmm