Behringer Neutron oscillators through the TD-3

[@vasil3089]

I had no clue you could disable the TD3 OSCs that way. Amazing!

[@kevinwheeler8871]

Well, you 100% just sold me on getting a TD-3. Thanks!

[@Rik_bS]

Clever patching to make a frankensynth, I like it

[@dpinskey]

I own a red TD-3. Just learning how to do the whole synth game. It’s pretty neat but a lot to try to figure out. My passion is playing drums but I’ve been playing around with using the TD-3 to sequence an old CASIO WK-3000 and finding some really interesting timing patterns to play my drums against. It’s opened a whole knew area of interest for me that I have been enjoying tremendously - even if trying to program the TD-3 is absolutely mind boggling. But resulting in lots of happy accidents.

[@avrilcadabra]

Thats good to hear. Drummers know all about poly rhythms and polymeters. I guess you use shorter pattern lengths on the td3 to shake up your timing and using the triplets mode. This video is is a bit complicated but then again so is programming a td3 compared to any other sequencer.

[@kaydot6889]

YOU CAN DISABLE THE OSCILLATOR BY PUTTING IT IN THE MIDDLE? God forbid the manual say that anywhere God damn Thank you, my guy, you have no idea how pissed I was when I got it and couldn't figure out how to do exactly what you're doing there with my neutron. I was about to tear it apart and mod a switch to turn the vca to always on. This is a much better solution, all things considered.

[@nickolasyounker]

great reminder to everyone that you can trigger with sound! Nice work as always...glad you were thinking about that filter too

[@charlesneuzil5765]

Very Nice! And creative use of the TD-3. I love the sounds you created here, very cool. I like the yellow TD-3 you have. I've got a red one. Wanted the yellow, but back in March my wife wanted to buy me one for my birthday, and I didn't want to pass that up, hence the red one. Yellow wasn't available then. The way I am I just might buy a yellow one, then I'll have two. Which I really only need one. I like the TD-3 quite a bit, more than I thought I would. And have been using it a lot too, with my Drumbrute Impact. It's been a lot of fun. Thanks as always for the great videos, you are always giving me good ideas................

[@avrilcadabra]

Very simple fun with just the td3 and a drum machine. I totally forgot to turn the hi hats on this whole video. Look forward to using it more. Can get some nice soft tones out of too. Not just acid stuff. So you have mastered the sequencer? It is quite the adventure

[@charlesneuzil5765]

Avrilcadabra - oh man! Hardly mastered the sequencer yet, I put myself at the rudimentary level at best, but I’m determined. I have found the TD-3 more interesting and more fun than I originally anticipated, so that has been nice. I just need to focus and put more time into it, I keep letting myself get distracted on other stuff. I’ll keep at it! Thanks! 🙏🙏

[@chitlun]

Excellent stuff! I wanted a yellow one but I couldn’t find one in the UK for less than almost double the price of a normal one so I opted for a blue one... Wasn’t aware of disabling the TD-3 oscillators in this way, cool 😎 Great video as always, can’t wait to hear what you get up to with the new addition to the family, peace ✌️

[@avrilcadabra]

I'd only seen my first td3 for sale in Australia a couple weeks ago a silver one. I was pleasantly surprise to see the yellow ones. Thanks look forward to using it more.

[@nitelite78]

What's the difference between the yellow one and others?

[@chitlun]

@@nitelite78 purely cosmetic. It has the ‘Acid’ smiley face on it.

[@nathanielberners]

Welp, there's one more reason to stop delaying getting a TD3... Great video an really nice sounds 👌

[@avrilcadabra]

Thanks , this was probably my favourite thing I have have done with it

[@rubenbell9334]

No worries about my comment on your other vid about the reverb, answer found😎 also this is sick keep doing what ur doing 👽

[@flexliv]

from 3:00 with distortion is epic :D Now i am ashamed i havent really used my yellow one for something like this yet...

[@Tobes1100]

Holy cow! This is so cool!

[@zpinkLondonBelow]

Very clever patching and great result, nice one!

[@OldPsytrance]

great machine. behringer beast company. nice music man

[@glenesis]

I'm using the TD-3 to gate & filter the Neutron too! It's so awesome!!🤘

[@avrilcadabra]

Great combo!

[@spencermartin467]

Just did it, it's great!

[@expensivenotes]

Great stuff. I will have to try pumping different oscillators like this.

[@avrilcadabra]

Cam get such great sounds doing this. I'll have to get my hands on the new TD-3 and try it too

[@expensivenotes]

@@avrilcadabra Looks very promising!

[@djtechnothrash6234]

very nice

[@paul_rowley]

love this - thank you!

[@davidbetts2980]

I subscribed within seconds Absolutely amazing 🙏

[@avrilcadabra]

Thanks. Welcome aboard!

[@fincorrigan7139]

Always very useful and informative. You do great work, thank you :)

[@avrilcadabra]

Thanks Fin. Much appreciated

[@zoure]

At 2:10 sooooounds goooooood !!!!

[@avrilcadabra]

Me too. Has such a nice sound with the filter turned down

[@andrewlnguyen]

you do awesome things. that's all.

[@dmhrpr756]

when controlling the neutron oscs via cv, will it slide in the same way that the td3 does? also, have you tried using different audio sources for the filter in? I want to try sequencing my reface dx in reaper and running it through the td3 filter. would love to hear some more examples of what you've done with this technique :)

[@avrilcadabra]

Good question about the slide I'd think it would since its just legato portamento but I'd have to try. Honestly have not plugged anything into the td3 filter since. I will get around to making a proper video now I have some longer cv cables. Would love to hear the dx through the filter

[@KoolteethDeBlog]

Actually very neat and nice! This was a track allready! Bad cat, btw...

[@avrilcadabra]

All healed now. Bad cat is good cat again

[@KoolteethDeBlog]

@@avrilcadabra bad cats won't stay bad cats all the time... they are too cute :D

[@dreamtekeuphoric1327]

Really nice!

[@patansy3455]

I have almost the same set up. I have a yellow Td-3 , a Red Neutron and a collider reverb / delay effects pedal. I have a different keyboard and delay pedal but comparable. I have a Reface DX keyboard. The only part of your set up I don't understand is after hooking audio out from the TD-3 to the reverb pedal. Where does the audio from the reverb pedal feed into ?

[@avrilcadabra]

Hi Patrick. I have a 12 channel behringer mixer I plug all the audio cables into that. Then mixers out going into an akai force so I can sample or sidechain / add effects. Then akai out to zoom h6 which I record audio on

[@patansy3455]

@@avrilcadabra thanks for the advice. I have a 16 channel Mackie 1604 mixer. I will see what I can come up with it.

[@patansy3455]

@@avrilcadabra in this video you have all the different machines ,keyboard, Neutron and TD-3 to the mixer?

[@patansy3455]

@@avrilcadabra i have an akai 2000 xl. Sampler. The Akai force seems quite different but. I am gonna see what I can create.

[@avrilcadabra]

@@patansy3455 yes all my synths currently go into mixer. I think the most recent video I did of how everythings set up was the akai force midi multi video. But I have older tiny studio videos when it was a bit more straight forward

[@collignonchristophe]

The shapes of the oscillators are going up and down ... how do you get this done please : synch them but how ? I know ... noob question probably

[@avrilcadabra]

Hi lfo out into shape1 in, you can send the LFO to invert also and then into shape2 in, if you want them to go in opposite directions

[@Expectaz]

Nice experiment!

[@avrilcadabra]

Cheers Expectaz look forward to using it in a track!

[@andespenser3017]

If the Digitakt is controlling the TD-3, what's the midi on the Neutron for? Thanks for such amazing content. I have gotten into analogue and vintage synths over the past couple years and your videos always help me learn things it might have taken me years to discover, if I ever found them at all. I really appreciate the straightforward way you teach these patches and setups. I learn not only how to use or stretch the synths I already have as well as learn about new ones to look out for. :P

[@avrilcadabra]

Thanks Ande. The answer is simply they were all set up to work. So I would just choose a different midi number on the digitakt and it would sequence a different synth. The neutron has a led to the left of the midi cable that flashes when it receives midi data. So you can tell its not receiving any midi In this video.

[@kdrkeadjras7996]

Dope!!!!!

[@synthsproblems3475]

Hey did u notice the crave is extremly louder than the td3 ? This is normal ?

[@avrilcadabra]

I don't have a crave but the td-3 output is trs +8dbu which is not the hottest output. I have to lower everything else down to match the td-3 or run it through a pedal.

[@bor.is.coffee]

🔝🖤💫

[@adam8sixty133]

?can you do td3, rd6 ,nuetron,arturia keystep 32 ?

[@avrilcadabra]

I don't have an rd6 sorry

[@adam8sixty133]

@@avrilcadabra fair enough, thnx for the content!

[@kleinaberdoktor2835]

What happened to your hand? :O

[@avrilcadabra]

Think the kitten had scratched me, its ok long since healed and she is grown up and sleeping on the chair

[@aounms]

How do you disable the td3 oscillator ?

[@avrilcadabra]

Move the shape switch to centre. It cuts out between the shapes

[@DJbace1]

@@avrilcadabra ? Where is the shape switch lol

[@JH-lo9ut]

@@DJbace1 on the left, labelled "waveform"

[@70zenboy]

Great patching setup. Non intuitive but very effective. 👍🏼🙏

[@avrilcadabra]

Thanks you could send the midi sequence to the neutron also and then just run a single cable to the td3 filter and forgo the cv one.

[@davidbetts2980]

Well you just sold Behringer a Neutron and TD-3.

[@avrilcadabra]

They are good synths. The neutron has given me years of use. The td-3 is bit more versatile than it gets credit for.

[@davidbetts2980]

@@avrilcadabra You've definitely shown that in this video. The versatility I mean.

[@zambariciosul]

Stupid slider don`t work.