Behringer WING - A complete overview

In this video:
a close look at the hardware
- the software
- the capabilities
IO
More infos:
www.behringer....|en)
WING has 16 analog channels IO including 8 Midas Pro series mic preamps - that could be even enough for a small club gig
and for anything bigger you’re using a digital stage box
it connects to all the microphones on stage
it send’s all the monitoring to the stage
and it does everything over a regular network cable, so no more expensive and heavy multi-core cables anymore
now to manage all of these 374 inputs and 374 outputs WING uses a new concept, the so called sources

[@behringer]

We answered a lot of question in the live chat - if you don't see it, you can open the chat in the top right ("SHOW CHAT REPLAY" on desktop).

[@NeonPLotus]

I would like to use this as a replacement For an audio interface, on a Mac, for my daw, which would also allow it to be a daw controller. Can you address that as well?

[@gregwhite6811]

You did not answer the delay compensation question. When using the standard plugins/FX in the wing, does the wing have the ability to handle the potential latency issues associated with using heavy dsp processing.

[@hixrat]

Can you cross fade snippets/snapshots?

[@KingpinRonin]

@@NeonPLotus all the x32/m32 mixers could be used as sound cards and DAW controllers, though your mileage may vary depending on DAW. I've been able to use them as 32 channel I/O to Tracks Live, Ableton, and Reason. So this new mixer shouldn't be any different in that regard, if not better.

[@KingpinRonin]

@@gregwhite6811 the x32/m32 mixers have manual 'delay compensation' for distances to physical live PA speakers in a venue. There isn't a need for manual 'delay compensation' for internal FX within the unit, seeing as they make all the internal plugins and DSP. Kinda like using the stock plugins in a DAW, they just work. I'm guessing the Wing would be similar, as it is primarily meant for live mixing, with DAW/studio production as a secondary goal. It isn't like the 'wild west' of VSTs, there isn't third party plugins available for them (other than through an external Waves solution, for which they have a card to interface to that). There will probably be ASIO-type driver latency settings if you use it as a sound card for your PC/Mac. But not 'delay compensation' like in a DAW for dodgy/slow/poorly coded VSTs (which I think your referring to?). I hope that answers your question? I mean, I don't work for them, but, from using the other mixers I hope that is close to explaining what the Wing will do.

[@amberd6942]

I just received my wing and SD..OMG the wing and the SD are amazing...This has change my recording and workflow for the better particularly when it comes to recording. I have four rooms that are used for recording. I have all the rooms attached to a patchbay that is mounted in my hallway wall. I put my sd on a rolling rack. now I just roll the rack in the hallway to plug up all rooms or just one. In the future Im sure there will be many updates making this mixer even better. I cant wait!!! Thanks Behringer!!!

[@AndrewLeSynt]

nice to see that behringer went from a „most hated“ to „most wanted“ company! you guys are exploding the market and our budgets 😂😂😂 awesome synths and products .......

[@robfriedrich2822]

They go back. Have 1990's stuff that works perfectly today

[@deanivan3951]

I always loved them it's just the snobs that didn't.

[@erictidmore8047]

You guys have come such a long way since the X32 & Air Series. Only a great company would continue supporting older products while innovating new ones. This setup looks killer.

[@365expressions5]

1:06 “yea” “Yea” “Yeah” “Yah” “Yeuh” ..... ...“Yea” These guys are awesome lol

[@NameNaameNameeNaamee]

Their English probably is better than your German ;)

[@365expressions5]

NameNaameNameeNaamee lol definitely not a knock on their accent, they just seem like really polite gents

[@ManoChannelTuNelysk]

They are obviously jizzing their heads out for their new product XDD

[@silverben8495]

Yea

[@solidtv1988]

Same thoughts hahahaha

[@marcpinion]

This takes Behringer to the next level

[@joejeffery8581]

MIDAS did that. Such a huge leap. Nice to see the next iteration look so good. The X32 is super capable, but clunky to work with.

[@IgnacioMadero]

This changes the game totally. Amazing.

[@SimillionMedia]

Behringer has really been stepping it up lately!

[@AWTechTuesday]

- Will the Wing feature delay compensation for channels or busses with Premium effects applied to them?

[@gregwhite6811]

I hope it does.

[@AWTechTuesday]

- Do matrices on the Wing operate like on the X32 (a mix of mixes) or more like a Yamaha (able to receive mixes and individual channels too)?

[@patrickgohara]

Ascension Worship - #TechTuesday haha, looking back through these, we had literally the exact same questions.

[@AWTechTuesday]

Patrick OHara Great minds... 😉

[@cameronclarkhull]

We've just upgraded from the x32 compact to the wing at our local theatre. Looking forward to giving this a go 🙂

[@minimoog4236]

Talking of DAW control, how many faders can you use simultaneously? Is it just 8 like the X32, or can you configure 12 or even 20 faders? More importantly If you are using the X32 as a 'soundcard' the signal goes to the DAW post-gain but pre everything else. Is the Wing like this or can you feed the DAW post EQ/dynamics (post-fader) which would then make it a very powerful recording console too. (ps I know you could configure the X32 to give 16 analogue post fader outs - but then you'd need a seperate soundcard for your computer)

[@glennpowell7393]

Would like to see it in the studio working with Pro Tools / Logic Pro X , multi tracking bands or audio visuals for film Etc, number of AD,DA converters etc , sounds promising .

[@Bfredproduction]

We would like to see DAW integration demo with Logic Pro X . Especially as surface control device

[@longshotkdb]

absolutely!

[@QuaverloveStudio]

... and Cubase, please.

[@tvisionproduction5176]

And reason please

[@justmick3858]

Its main function is for LIVE applications....so who cares about daws...its probably not the right desk for you.

[@kevinobrien3888]

FL Studio please

[@jlwall]

Are the buses phases coherent and corrected when adding in an onboard plug in effect to one yet not the other.

[@_XoGuSi_]

Many thanks to the engineers of Behringer. You are defining new standards!

[@kwviewer]

I would love to see how the Wing could be used to record and mix with Logic Pro.

[@heikobo2130]

Big fail in the name... after the X32 this should be called the X-WING.

[@Skiffy1]

Hahahahaha!!!

[@supvertigo]

Can you set up the faders so that you could have 8 DCA faders on the right and if you select one of them for example drums, the faders on the left show all the members of that DCA?

[@kevinschmidt9082]

Pop groups would be excellent!!!

[@ScottWhatman]

Aventis has this feature .. absolutely awesome feature .. would love to see it on the Wing

[@ChrisDeJuanMusic]

Can it be used as a stand alone multitrack recorder with no computers nor DAWs involved!? Awesome, Behringer have changed the game!

[@feet57]

isnt that the reason it has the memory cards in the back?

[@skyocean9977]

Hello Behringer Team, what a great new console. The wing is as the successor of the X32 a FoH Live Console (function wise).My question is, will there be a Studioversion with just Functions wich are needed in a Studio? Like dedicated Monitoring and Transport section? with a knob on every channel (above every single Fader) for plugin parameters? With mirrored name and number of the particular parameter of the plugin? I know there will be a DAW mode based on the Mackie protocol. But I think if it comes to handling and workflow, there are more things that would be important and useful. Dedicated buttons for marker, undo/redo, plugins, automation, loop, cycle, save, cancel, touch, latch, write, trim , miditrack, audiotrack, busses, Mixer on/off, inserts and so on. Cubase for example gives you in it’s control room section 4 independent sets of monitors. Each of wich can have measurement plugins if needed of a limiter or something else. Beside of that it’s possible to trim the monitors to a equal level to avoid one pair of monitors will not be louder than the other. I absolutely believe that a studio only version would be a great success. Here is why: there are controllers by different manufacturers out there but no one is in the end a really good solution to me and so many others. There are the avid ones who work fine with protools and less good with other daws. There are smaller controllers wich are just too small, too limited, breaking a good workflow and in the end are useless, because customers turn back to working just with the mouse. There are just 2 competitors out there wich would have products in a identical format. There is the S3 wich is far more expensive and works better in protools and there is the even more expensive nucleus from ssl wich also uses the mackie protocol but with a good layout for working in a studio. There is no really useful controller/console in the format of the wing for cubase, ableton, logic, digital performer, reaper or even nuendo. I know there are the larger solution like nuage or s6 and now s4 but these are all way more expensive and in the Pro/High End area. The SD cards wouldn’t be needed in a studio and the StageConn interface is more a live sound thing (very useful by the way). 4 separate main outs is not a studio thing also. But connection wise there is no need to change a lot. It’s more the layout and workflow in a studio. If there is a company who can make this happen and bring it to the world in a stunning price range than its BEHRINGER ! 😉

[@AWTechTuesday]

- Will the Wing feature DCA Spill (pop groups)? - Also, would you be interested in some review videos for the Wing? Our channel currently has 90+ free videos for churches (many of which feature the X32), and I’m certain our audience would love to see how a Wing could be a useful upgrade for them :) -Chad

[@jacobhaynes691]

Ascension Worship - #TechTuesday I’m also waiting to hear about DCA spills

[@earlgriffith3592]

Oh, Drew Brashler!!!! Behringer is calling

[@maxmol22]

So basically what Behringer tried to do with this console is provide an option for Recording Studios, Stages and Radio broadcasting. If this will be half as impressive as this video says, I'm sold!

[@studio6productions277]

This looks to me like a complete game changer and looks like a really superb console. Will be looking to get one of these for the studio next year. How does this unit interface to the DAW for active controls. We would like to have our drum feeds coming into the 8 pre's on the wing and then we are looking at usingRME 2626 Firewire pre's for everything else. Can you assign the first 8 faders to control the internal pres and then the other faders to control the DAW.

[@robertsimpson5801]

Are there any plans for allowing higher sample rate operation by reducing the channel count?

[@KillahJamez114]

We would love to see a demo of integration with a some of the to DAW's out logic pro x. PT. Studio one Cubase ect.

[@StringerNews1]

All I want to know are the most important things: 1. Will there be a Midas version in proper matte black? 2. Will there be a Little Wing? As per the X32 Compact...

[@DekriteN09]

8:26 damn that was scary moment

[@northernstar190]

Its the new Behringer Ghost synth.

[@doncolga08]

Bahahahaha! Yeah!

[@neilloughran4437]

They should have played the Jaws music briefly just at that point... :D

[@pascalmerschaudio]

hahahahahahahahaha

[@Hermiel]

I know, right? He was totally coiling that cable over-over and and not over-under! 🙀

[@davidhoover2446]

Right now, I use a CL5 and I need matricies that are able to bring up individual channels plus the left/right mix. I use them for hallway and internet feeds where I need the main LR for the band, then, I need to turn up individuals for speaking, videos, and background music separately to get the volume to match the band. Can I send individual channels in addition to the main LR back to a matrix to turn them up more? Thank you! Question #2, is SoundGrid built into the console or does the interface have to be external on a separate computer? You said soundgrid was "native," but what does that mean?

[@AWTechTuesday]

- I see that the Wing features 16 stereo busses. Does that include 4 busses for effects like the X32 for reverbs and delays? Or are those accounted for separately?

[@tomkrause4165]

I follow...

[@mrbkeyz_]

Following

[@atech9020]

No, the aux busses are simply that. If you use Aux 16 for Reverb, you would INSERT the desired reverb onto that bus and you would set it for post-fader. The Aux bus would need to be configured as stereo and sent to the main mix or Matrix as desired. You would then use the Aux fader to control the send level to the FX. Muting the Aux would also allow the reverb and delay tails to bleed through still even though the input path is muted. There would be no need to have a return path now for the FX. The fundamental difference is that instead of controlling either the send or the return to an FX, you now only have to manipulate the feed to the FX. There is more still though...... You can place the FX level ( the actual level of the FX that we hear ) onto a custom fader and then utilize that as if it were an FX return fader. So you can utilize the mixer in a more conventional way if you wish.

[@tylergoswick4536]

Trying to compare the Midas m32, Behringer wing as well as the Allen & Heath SQ-7. Overall sound quality and workflow. Can anyone give any feedback with them?

[@IanHind]

Tyler Goswick there’s not a chance this will sound as good as the SQ series, I haven’t heard anything in the sub $10k mark sound anywhere near as good as those consoles.

[@bradleyhenady2032]

We just upgraded to an SQ series and I can’t imagine anything made by behringer/Midas sounding remotely as good. It’s like we took a blanket off our speakers.

[@AWTechTuesday]

- STAGECONNECT seems incredibly interesting. Are there any specific products that you can share that will incorporate that feature in the near future?

[@hohofool]

Hello, after you mentioned to prompt ideas about "wing" in your video, I will do so. In the past I tried several ways to get in contact to the people who are developing the product, but no way worked. I'm an Audio- Pro and doing life-sound since 1979. I find your product very interesting in several ways. But there are some questions in my mind that I could find no answers for. A lot of life-stuff I do is mixing bigger groups of musician (orchestra, big-band and so on) Therefore I find it very interesting that your mixing board can handle stereo- channels. I have to notes/questions for particular applications which we are very important to me. Number one is about "delay" Because I use delays to do "runtime-paning", I have the problem that most of the digital mixing board could not, even if they have stereo-channels, put delay after a channel in direction to the buses, only post fade, with different numbers for the delay to the odd and to the even side. But that is important to do such a kind of panning. What about the "Wing", is or will it be able to do this with this mixing board. Number two is about "scenes" Because I sometimes have to deal with shows who had a lot of snapshots, I often come along with the fact to exchange just a few settings for the whole show(gain, EQ, level and so on) and just for some selected channels. What about the "Wing", is or will it be possible to do such changes for the whole show is just one click (global paste) I would appreciate you getting some answers. And if you would like to hear more from my experiences with mixing boards just contact me. Yours

[@AWTechTuesday]

Good video guys. Excited to learn more as the Wing becomes available to the public. -Chad

[@BryanWilson08]

Something that I feel is lacking from the X32/M32 and now this WING console: I'd like to have at least one HDMI or DisplayPort output with a special menu in the touch interface to customize what is shown on an external monitor. Example: I'd like to have my meters page visible constantly on an external monitor while simultaneously being able to view/control FX on the touch interface. If this external display could be connected as an additional touch-enabled monitor via USB, then I could have FX interfaces, recording control, etc. on external display(s) while keeping other pages in view on the console itself.

[@Tigerex966]

yes, how this was overlooked is beyond me maybe they can make an ipad app, but ios has sp many new bugs each update

[@delaytea7455]

just get a laptop, raspberry pi, or tablet n use the app, the utility menu in there is exactly what u are talking about, i have my meter page & rta fixed on 2 monitors via laptop

[@BryanWilson08]

@@delaytea7455Definitely.. I have multiple iPads and monitors usually. Would just be nice to have it built in is all. :)

[@jaredkoopman2116]

1. Any plans for a "rack" size version either without faders like the X32rack, or with faders like the M32r? I need compact yet still have the processing power of the WING. 2. Waves integration, does it pull the plugin information into the console and you can manipulate there or would that still be an external control? 3. Offline editor, when will that be released so we can get familiar with the OS? 4. External monitor? 5. Very interested in the stage connect options. When will those start showing up? Will that only be Behringer products or will third parties be able to create their own stage connect devices? 6. Will there be new stage racks that will have more IO than 32x16? 64x32? 48x24? etc

[@mrosenblatt]

I have my doubts that there would be more stage racks, although it is a possibility. Between the existing AES50 stage racks that they offer with both Behringer and Midas, and there's a massive amount of Dante and Madi racks available already. I think the only new stuff will end up being that Stage Connect gear.

[@Douglas-jr2pf]

When will BIGWING 48 Fader be released? Will wing get backplane Master and Slave Wing "joiner" super buss (linking sends & phones?) Will it get 96K support or not planned only Heritage D?

[@ActionlessLoveless]

19:37 such sort of thing i always wanted from like 12 or 13 years old :D

[@keysbythenumbers]

Signal chain signal chain signal chain..! With only 5 FX slots. It would be great to view the sonic tools; eq, compression, gate, saturation that are built into a classic analog desk. Giving room to setup a proper fx chain without sharing resources with mod type fx. Can I step up fx on the channel, then setup a fx chain in the group, and add additional processing on a DCA?

[@robertsimpson5801]

Is there any plan for a rack version of the Wing?

[@newrockaudioproduction8319]

Please

[@newrockaudioproduction8319]

Let's make a poll.. My rack has made my life so easy

[@robertsimpson5801]

@@newrockaudioproduction8319 I watched through the live chat from the live video stream, and the question about a compact or rack version was asked several times, and Behringer refused to even acknowledge the question. What the means to me is that they don't want to say yes, because if they do, they will hurt their launch sales, because guys like you and I will just hold out for the compact version. On the flip side, if they wait, and we buy a full-sized Wing, then when they release a rack version in two years, they will sell another Wing to each of us who wanted the rack model to begin with! So long story short, yes, they are planning on a making a rack version, but it won't be released anytime soon.

[@emersonvella]

The surface is big because of how the faders are set up. If you look closely, the centre section at the bottom is already rackmountable in size. It will be a while but it will come out eventually.

[@dongwarrenmusic]

Yes, after these all solds out. Lols

[@merlynscave]

I am interested in using this desk in a recording studio with a Mac and Logic. I am ok with the recording capabilities but could I mix with it ?

[@Vibekilla]

Yes.

[@andyhamm6389]

The x32 has a pretty solid standing as the standard club level console, it looks like Behringer is setting its sights a little higher with this model, and basically leaving the club setting out if it by not having enough built in I/O to actually work with. However, the X32 and M32, although very capable consoles, are not rider friendly so I see this as being what this class of consoles will need to overcome. I have 2 X32's at a club, with digital stage boxes which don't see much use at all, based on nothing other than the name on the console itself. We had to purchase a used SC48 to meet rider demands, and it's very debatable that it is 'better' than the M32. I think Behringer needs to work on their Rider acceptance and start endorsing some of the up and coming acts with this line to see if they can get the standard "No Behringer" removed from Tech Riders.

[@Metasfera]

Behringer did them all) Did you hire a new engineers or a conceptual director? I am blown away about products you do last year! Keep up.

[@helldotsin]

This is awesome! So happy to see Behringer's direction!

[@basmeyer22]

Regarding hardware I miss any words on new outboard gear, read digital I/O rack mountable equipment of stand alone stage boxes, that include Midas Pro preamps just like in this console, and the new StageCONNECT (SC). Please make proper PowerCon sockets on these, not IEC.

[@ManOfDoodle]

will there be a midas version with like better faders and potis? or did you melt the x and m series together?

[@verticatv.1248]

all i need to know is does it control daw software

[@JamesWestbrookdop]

Will a wing core be coming soon ?

[@KDBAO]

Is there an ability to connect extra screens to the console? Aside from an iPad with the app.

[@markrodriguez7031]

Behringer just keeps coming out with things that I want...is it a coincidence that this premiered the same day as the Tesla Cybertruck was announced?

[@VenVile]

Can you guys do a video about its DAW control functionality and features? You guys haven't really covered this yet.

[@alicespages7998]

This video is probably going to get taken down, KZbin doesn't usually allow porn

[@Felix-303]

You have never had sex - right? Ha ha

[@gojdartamas34]

Do You recomend thi mixer electronic music production studio useas DAW controll surfacestudio mixing or only live mixing?

[@grevestudiotv1755]

Gute Präsentation - nettes Team - großartiges Pult für den Preis ! - Aber .... warum sind die Aux Kanäle keine vollwertigen Kanäle? 40 Kanäle ist keine wirklich große Verbesserung zum x32, wenn man nicht mit vielen Stereosignalen zu tun hat. Das ist Live bei der Abnahme größerer akustischer Ensembles aber der Fall. Durch die fehlenden 8 FX Returns, die es beim X32 gibt, benötigt man zumindest einige der AUX Kanäle als Returns, wenn man diese mit EQ bearbeiten will und/oder als Fader in der Hand haben will. Leider läßt sich auch der Send Anteil eines Busses in die Master Busse nicht auf die Encoder in der Assign Section legen. Damit könnte man zumindest den fehlenden Return Fader ersetzen. Wenn schon keine vollständigen AUX Kanäle.... bitte einen COMPRESSOR in die Liste der STANDARD FX aufnehmen. So könnte man über den INSERT Slot die AUX Kanäle zumindest halbwegs sinnvoll für Instrumenten-Inputs verwenden. Danke für Eure bisherigen Verbesserungen des WING OS .... weiter so!

[@behringer]

Danke für dein Ausführliches Feedback - hab ich gerade 1:1 in unsere Entwicklungsabteilung weitergegeben! :-)

[@grevestudiotv1755]

@@behringer Danke für die schnelle Antwort!

[@radulica]

Is there a decent multiband compressor on this thing? X32 and M32 both have an unusable multi compressor.

[@SayoSpine]

We all hope that you guys are going to prepare some advanced daw integration. Not only Mackie 8 fader protocol

[@acidjack]

I want to integrate a lot of external Outboard , like MultiFX , System 500 FX, compressors etc. In the video you explain that there is a lot of flexebility witch looks awsome. is it posible to integrate my external gear also so easy? Can i use my gear as inserts like on a Analoge console. Or how many FX returns for external FX can i route to one Chanel ? I know that i use for that more external inputs witch is fine.. Last Question, will there also an I/O box /19"" with just 16 i/o non XLR Jacks or combijack XLR/Klinke?

[@theriddimkingz]

have the same question @BEHRINGER

[@grahamshaw6085]

Will the Wing be able to compensate for latency if I want to run a parallel plugin on a bus? For example say I wanted to do a parallel drum squash with an 1176 plugin, from what I understand the x32 doesn't really do this.

[@soundtechnigeria866]

This console is very intuitive and fluid, however i was expecting to see an improved insert chain that can use any of the io/card slot as it route bus, like in the x32 where we could insert from auxes, but to be able to use AES, USB etc as our insert bus alongside the physical auxes

[@rodneybates2135]

Please discuss the scene management in detail. Needs fully flexible inclusions/exclusions like the ilive or sc48, and timed cross fades

[@starclassic71]

Also are you going to make different versions of this mixer like the X32? I am specifically just wondering if you are going to bring out a Wing Core. I would love to talk to a product specialist or engineer to present my idea and the reason why.

[@iampuesa]

Can you have a button that purchases a new synth you release?

[@secretelitemusic]

Call me a grumpy old cuss if you want, but I'd like to hear some sound being processed from an outlying stage box, through the gamut of source assignment, into the processing and grouping arena, and being controlled by a fader. Possibly with some automation occurring. I'd also like to see multiple channels being bounced to a multi-Xeon DAW Workstation to show how solidly and painlessly the recording of 48 simultaneous tracks of 96 or 192 works out in terms of buffering.. And I'd also like the moon on a stick, please. In your own good time. I do realise that the Wing is still in dev/beta, but those aforementioned minor details will probably be the USP for something as "not cheap" as the Wing. :P The theory looks good. I hope the practice is even better.

[@dzod]

Any chance of a studio i/o box (as opposed to a rugged stage box) with jack inputs?

[@adrianfiddy2161]

Please add a time index to this video so we can skip to different sections. +1 to all of those requesting daw integration demo. Logic / Cubase / Studio One etc. With competition offering DAW modes, showing the cohesion of your latest offering with DAW software would be marvellous.

[@NameNaameNameeNaamee]

What ways of actual channel navigation are supported (in a sense of DCA spill, Pop Groups (->Tags?))...?

[@Ducklakestudio]

I bought a X-WSG card for my X32 and would like to know if i could use it in the Wing. And whats about the „native“ Soundgrid on the Wing? Is this an option to by later, or have i to order it that way? Thanks

[@pantheraus]

What is the config for the output eq's for live use? The one thing that i was turned off on the x32 was the limitations on the output graphic eq per output. I ended up purchasing another brand as every output had a dedicated 31 band on it (17 outputs). Cheers.

[@stefanotappari5977]

It looks amazing ! Thinking of it in my studio (as I already use X32 and XR18 live) to replace my old in-line analog console, recording direct into Logic. How can I keep using some of my favorite analog outboards (valve comps, reverb, etc.)?

[@grumpyoldmen7034]

At what point (input or Post Fader) is the recording taken from.

[@djtecthreat]

@behringer We need a rack version of the Wing.

[@AdamGotheridge]

Does ulranet work with it, like can I still use by my p16 monitor boxes with it? Thanks

[@WholeHeartedPro]

Adam, The Wing does not have Ultranet, but the AES50 snake heads (DL32, S16, SD8 for example) do. It is just outputs 33-48 on that AES50 link. So yes. it might require a bit of programming, but your P16 monitors should still be usable. Personally, I would do my monitor mixing in the board with a remote app (which would theoretically give me access to 48-96 channels vs 16), and just use the P16s as headphone amps (two channels for each mix), but I digress.

[@AdamGotheridge]

@@WholeHeartedPro Thanks, makes sense.

[@manysounds]

Yea, definitely want a rack mount tiny version with X-Touch control???? Tell me it comes.

[@ps-pb9ld]

There will be WING in rack?

[@K.Psomiadis]

Very impressive mixing console ,amazing design and very compact for so much multiple channels !! the question i have is did the Wing Support Daw Controlling ?? I have for example the Reason 10.4 !! But ok its a Professional Device for live perfomances and not only,but i don't have a problem to fit this into my home studio procuction :)

[@napynap]

It's unlikely that Props errr Reason Studios would work that way with Wing. Check Reason Talk to get in the loop.

[@1rcproductions]

Does it have touch sensitive motorised faders?

[@BilemboYaBeton]

can i use this for Radio Stadio?

[@themusicofmikegoodwin]

I'd love to know what other versions will be released. For example a compact type version for smaller setups. I would hope in smaller versions that there might be more inputs given they may often be mixed side of stage. Have been researching smaller digital consoles and there doesn't seem to be much in the way of current technology. Most are 5, 6, 7 years old. I just know I'll get one of these older tech style mixers and then Behringer will release the next big thing in THAT market. Perhaps a 16 or 24.

[@okaudiopro7613]

Great and amazing mixer....too bad it would never be accepted in a rider of a professional level concert / event ....😟

[@georgemartinez2980]

@OK AUDIO PRO. I'm aware you are not without knowing that in the real-life touring world there are somewhat more stringent demands expected from audio consoles with regard to dependability, signal phase coherence, integration of Sound grid/Waves or other and first and foremost consistent dynamic range, particularly in terms of summing buss performance, to name just a few major criteria. It should therefore not come as a surprise that most touring engineers will carry show files for a standard universally accepted number of boards. (Midas Pro's, Digico SD's or Avid's Profiles and S6's to name just the most common ones), whenever being unable to having their own touring console. Of course this does not in any way lessen the amazing progression in development of the so-called "affordable" segment in compact digital audio consoles. Proof of this can be seen by the increasing number of artists touring with a minimal yet ingeniously comprehensive self-contained integrated audio package delivering as remarkable sonic performances as with the more "upmarket" gear, always bearing in mind that a band being autonomous with regard to owning the gear and therefore controlling their stage sound will potentially have an edge over those that don't, (unless they can afford a dedicated monitor engineer), and let's not forget the band's FOH guy who has got to make all those factors chime together.

[@documentingordinarythoughts]

Where is the copilot app ? Got our wing but no app ! Anywhere !

[@JanekLenin]

It's out now ;)

[@Gregsound1]

When will you release the offline editor for this mixer?

[@dasc81]

Great stuff !!! I want to have it. BUT: This video is viewed by really many sound engineers. Why are there always alignment problems when both guys talk at the same time? This does not seem very professional ... ;-)

[@antiphlex]

And high level background noise too.

[@alexhormann8931]

dasc81 and definitely de-essing the right guy's voice.

[@victormaxwellchannel]

Would like to see the wing in a concert setting. Live drums, rock guitar, and background vocals as a front of house solution

[@phunx747]

This is so close to the multitrack recorder that a lot of us older guys are looking for. Any word on any overdub or track editing capabilities for the onboard recording features?

[@Mtaalas]

It's not a DAW... just get a computer.

[@richardloy5786]

Hey! Really considering this console as an option for a possible upgrade for my church. Love the point to point routing as opposed to dealing with banks of eight. Although, I would hope to see an update in the future that would offer a parametric/dynamic eq within the channel strip with the ability to sidechain...that would set this board way over the top in my book lol

[@TheAbominableDrVHiBEZ]

Wow , this is really amazing , what a powerful and intuitive console , bravo!

[@kyleparfait61]

Maybe this does not exactly replace the X32 since it is $1000 above, but wouldn't this totally make the $4999 Midas M32 obsolete? All you need are the MDL32 Stage Boxes and you have the nicer preamps that come with the Midas, plus all of this much expanded functionality.

[@NatLifeSounds]

alot of talk without showing a live work with a mixer

[@pakiw2]

Cables are fine, stage boxes cause way more problems, disconnecting and droping the signals with loud pops. They make something new and bunch of addons to it. Id rather choose local inputs.

[@adrianbila8906]

Can i mix like i mix on my logic pro daw? let's say i have 12 inputs for the drums and i want do send the shells on a separate bus, than the cymbals on a separate bus as well and apply eq an compression from there, without to affect physical buses on the console? also if i want to to some parallel compression as a send from the drum channel to a separate bus. is it capable of 96 khz samplerate?

[@zemawrllc524]

yes. what do u need 96khz for?

[@tonyleppanen8727]

When is Daw support coming for studio use , I’ve got my wing today... 3200 dollar and no support at release... you guys have been pretty wage with info regarding studio/daw support , not all people buying it and meant to use it for live... how long do we have to wait to get studio support ? Otherwise I’m thinking of returning it within my 30 day period! Thankful for answers!

[@TheMaddoxfam]

Will the console have the ability to solo in place?

[@AndrewKeithRussell]

Heard about the DAW Update, please more info and videos on that and integrating to Plugins in the DAW Native and using Behringer Plugins in the DAW (StudioOne)

[@ghghhuggg7029]

i'd buy 6 of these for my studio facility... daw support ?

[@msphawaii6444]

With the faders being in groups of 4 can we let say with 8 channels of drums on channels 1-4 can we group the 5-8 channels on the next layer BUT only switch that first 1-4 layer to the 5-8 drum channels leaving all of the other faders in their position? That would allow us to change the layers only in groups of the 4 faders in a bank with access the source of similar sources as in singers, tracks or what ever. Thanks

[@tobiasstolk7030]

I don't see any scene/cue function buttons...Is it programable as a x32? snippets? Cue's?Scene's? in what way? I am very interested!

[@jouebien]

Did the aes socket grounding issue get solved? The x32 aes ports have a tendency to kill themselves when not using correctly wired ether-con connecters and shielded Cat5.

[@georgegeorgio1751]

Would love to see a smaller easier to use format low cost digital mixer 8-12 channel that would finally introduce Digital to the average weekend musicians/small musical theatre etc that would break the sub $700 mark but with full moving fader functionality , it wouldn't need the sophistication of the larger models just basic like 4 sends with parametric/31 band graphic eq , compressor/limiters on all channels and stereo 31 band graphic and compressor/limiter on master/alt out , twin effects and parametric eq on all channels and say 50 memory locations for complete recalls, this should be rather easy with all the Behringer know how.

[@RobCoates1]

Totally agree. The Wing is just too complex and for my studio would be an enormous time wasting black hole

[@AlsamadCaldwell]

I am a HUGE fan of this and many other Behringer Products. Looking forward to purchasing this mixer!!

[@kosmikmusa]

Hi I am looking this to be used in theather. How many snapshots I can save and recall? Can I recall snapshots using midi note commands from example Qlab? Or can I fire sound cues from Wing using midi notes? Can I assing soft buttons to recall save snapshots? Does the recall work in away so when I used it to recall next snapshot so I could run the show linearly and not staring the menus and select manually next snapshot? Can I use sanpshots recall for just channel mutes and not efecting any other parameters faders etc? Many thanks in advance