Behringer WING Routing, Sources, Effects

[@rolihaeusermann]

Thank you Drew for your practical explanations. It's fun to follow your explanations and implement them in parallel on the console. We have learned a lot.

[@KGTv123]

I think one of the biggest workflow things that I think needs tweaked is you almost work right to left instead of left to right. So you’re taking input sources (on the right) and applying them to the channels (on the left). I would rather take them from left to right and not right to left. I think those being flipped would make it so much easier visually to follow. Since we read left to right it just is the natural way for our eyes to flow. At least to me. Still super excited to get my compact. Had the full sized Wing and it was way too cumbersome to maneuver myself for gigs, and I so just wanted a more compact version. And here we are now lol

[@vilddyr]

Agree. Complete design fail :)

[@botelucian]

We’ve been using the pro 6 , patching/routing is left to right. The corect way lol

[@Rafael_Figueroa]

I agree with you this is the most confusing part of this mixer if they flip that around it would be more intuitive.

[@alexanderbesemer5684]

Great video to better understand this wonderful beast. Very helpful. Keep it up!

[@gatlinproduction]

Great Video. You should do a basic video on how to set up a click track for drummers and in ear monitoring just using wing compact and drums.

[@starclassic71]

Can you please do a video on how to connect two or more Behringer Wings together like in a FOH/Monitor/Broadcast environment?

[@randymusik]

I'm doing this with the AES50 ports on the back and I use an ethernet switch to connect them both to my cpmputer so I can use the Edit software and also go wireless.

[@markallen4127]

inserting fx on busses instead of having fx returns makes a lot of sense..... we'll see if I can remember it though :)

[@felicianomontoya]

I am considering getting one of these for use in marching band, as our mixer has been problematic. The only issue I have with the WING is with total channel count. 48 channels is not enough for us, but since it does 48 channels of stereo, does that mean that I can route things like drumset overheads L/R and essentially have two mic inputs taking up one channel? They could share EQ/FX. I would like to do similar things for two synths and some sample pads that will all be in stereo. If this is possible, then the 48 channels would be enough for us. Right now, we use 54 channels of our 64-channel mixer, but 8 of those are extra channels for stereo, and we only actually use 46 faders.

[@morteensrock]

Yep, it works exactly as you said!

[@felicianomontoya]

@@morteensrock thanks!

[@morteensrock]

@@felicianomontoya also each processing channel can accept one main input and one alternate input (aasignable), which if you have two inputs that does not need to be used simultaneously, and require similar processing, that channel can just switch between those two inputs without much hassle!

[@gatlinproduction]

I am a newbie and I have a question. What’s a wedge?

[@gatlinproduction]

I’m trying to follow along with you, but I don’t have the same connections. Do i just skip setting up my AES50A and stay local? I’m a drummer All i have is two main JBL SPEAKERS ALSO My Overheads ended up on 13/14. Is there something special using 7/8 that the other inputs wont do?

[@Pkay-xx7bf]

Is there a way to connect the P16 directly to the wing without using stage boxes? Can Behringer make that possible via any of the Ethernet ports at the back of the wing?

[@brian.m89]

What about the dp48?

[@juukoisaac9421]

I get that the channels can be stereo but how are mics or instruments plugged in to make them stereo. It still is abit puzzling to me

[@DanielEdwards-]

Slap a Midas label on it to make it rider friendly and you’ve got a sale! 💰

[@immersiveaudionft2203]

update to firmware 3.0 you get fx Spill,

[@Pkay-xx7bf]

Wow! How did you get version 3.0 I don’t see it on their website under the firmware updates

[@immersiveaudionft2203]

@@Pkay-xx7bf go to the new wing page

[@gatlinproduction]

How about a basic video? Like a really really getting started video dealing with one channel. I am so so lost. Basic like just getting 1 Mic to work. Just the Mic and the wing. I cannot get my microphone to work or no reading single is coming out. And everything is new. Or just connecting your phone to hear audio play back. I’ve watched over 5 videos and still cannot get a single. Because everything I’ve watched y’all everywhere. Please. A simple getting started tutorial. You don’t say what kinda cards you need to record what’s recommended Please.

[@rusinjeff5959]

I tried doing a few basic videos you’ll find them on KZbin I’m just like you but I found out the best way is just to push buttons but on this video for example when He gets to user signal I’m completely lost. The problem is he never listens he just keeps on making the videos the way he sees fit. He is a great asset but he doesn’t understand basic videos like you’re talking about. He assumes everybody knows more than what they really do

[@vilddyr]

This patching workflow is of course deeply flawed. Completely confusing and mixing terminologies and GUI elements across differing features that does not correlate. A channel input should of course NEVER be referred to as an output destination. And patching windows should always be from -> to from left to right. You are unnecessarily confusing users, and yourselves. Nothing wrong with the functionality, so we will let this one slide 😂

[@coolceeofficialmusic7608]

Would be great to mix with automation on source channel so us musicians can just feed audio from a daw and do all our mixing and mastering on the console with fx and also do not mind paying for the tc finaliser plug-in on the 2 track recorder to offer Ai mastering and referencing eq match. Live mixers do not need this but us musician producer need it.

[@rusinjeff5959]

Stereo overheads doesn’t make any sense in routing or ouput

[@RichieRich-StudioHostOne]

Why don’t they just make this thing easy?