Bell UH-1 Huey | Plane Crazy - Tutorial

[@Kenedienz]

you builds are not to complex yet too simple they are perfect length for me and anyone else and they are perfect to add weapons or easily modify without turning it into your mo- they are perfect

[@nickeypickles1383]

It doesn't work and I know I did something wrong but I cant figure out what it is (whenever i try to go up only the front part of the helicopter goes up and then it just does a flip) it can only go down

[@89kboooh15]

For me it's working

[@vanessarosenbaum557]

Same

[@Reeling919]

Ive recommended this too many times before, and at this point it’s just an obvious candidate for a new change. So I can’t say it came from my desperate comments. Well done TMV.

[@burnt_cupcake]

Madvulpen is just coming with these insane epic builds

[@lalanikly1511]

fax

[@noob_kitten]

fax

[@HusaynRblx]

fax

[@cat_in_your_soul]

your builds are not to simple nor complex, just perfect

[@justNASCARguyYT]

Added hovers under since couldn’t fly. Now it does

[@Chessking678]

How do you only have 45K subs. You deserve way more for what you do!

[@Hxiall]

How do I fix a wobble when I start the engine and use the control surface in the propeller it wobble help

[@HippyHippo1]

Thanks! I love this tutorial because you spend the time to put what your'e placing on the screen. I find this super helpful as most other tutorials don't have this and it makes it hard to follow them. Good job!

[@FacuBX]

Even though I barely understand English this guy is the best at doing tutorials

[@SnepLeo]

Quick tip for any type of VTOL aircraft including spaceships! Take a hover thruster and put in these keybinds; Icrease thrust: (any button you will never use) Decrease thrust: (The same button you wont use) Speed: 1 Drag: 25 Make sure that they are symetrical! This will help you prevent it from rolling, and if that doesnt work make the material you use ice because it lighter than default. Edit: The hover thruster musr be upside down! Which means the 4 circles go up into the sky.

[@atom1kcreeper605]

Tip for vtol aircraft HELIUM TONS OF IT

[@Bill_Cipher-Theofficial]

amazing tut. i love how both the helis just takes off

[@jelly-lines3311]

Hello, while I was building and testing the doors, one of the doors wouldn't close properly.

[@Xav_Redd]

had a problem like that and it turned out to be the text block

[@USAsajs]

No, it wouldn’t move

[@elimanriquez]

Hey I ran into a problem where the top propeller doesn’t move at all. The motor moves but the blade doesn’t. I don’t know if its cuz theres a block connected to the top propellers that keep it anchored but it just doesn’t work. Can you reply if you can please?

[@AFatT34]

Check the keys

[@beratedbandit5196]

Thanks for this tutorial man! But when I press e and q the helicopter shakes and it doesn't really go up, why is this?

[@JoeMomma-sl1ni]

probably because the control surfaces on the rotor are going the opposite direction of the propellers

[@beratedbandit5196]

@@JoeMomma-sl1ni my god im dumb

[@arthurmorgan2679]

@@beratedbandit5196 my control surfaces dont affect going up

[@beratedbandit5196]

@@arthurmorgan2679 so how did it work for your huey?

[@arthurmorgan2679]

@@beratedbandit5196 it goes up very slow when i start the rotors but when i click e or q nothing happens doesnt go down or up faster

[@giovanesoares5589]

congratulations! in the end the helicopter was all bugged and it was shaking and I almost don't go

[@mrbingus3907]

how do you move forward when i press w it goes backward and down

[@legitllamalegend7232]

Same, I wish I knew how to fix this problem

[@marilynoliver-yx5ip]

Bruh because its using mouse

[@marilynoliver-yx5ip]

@mrbingus3907 turn on reverse thrust

[@nikoplanes774]

That doors are so satisfying

[@caloew7982]

I haven’t been here for awhile but I’m glad to see you’re doing heli tutorials now, I will use this for a vietnam rp. Thanks for your tutorials, your tutorials helped me get better at building and I hope I can build like you someday.

[@yeetking9656]

I salute this man done this comment about this you tuber he actually helps me with his tutorials I watch him and I made his helicopter right now and it’s gonna be like Kidz Bop it’s going to be on iPad

[@Plane_Person]

@@yeetking9656 wtf

[@idontevenknowwhattoput-y8d]

finally one of them who made it easy to follow, thanks! :D btw the only hard thing is, getting the ballast block density to exactly 9

[@bend-oof]

just click the part where it shows the density number to change it manually by typing

[@azariahazariah4493]

Nice to see you switching to making helicopters, I mean you’ve made almost every single popular/known military plane out there, it’s like you hit rock-bottom

[@hannahrumsby8164]

hhahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahhah

[@javiermuchut98]

mm...

[@m4ckncheeze]

it keeps turning to the left even when my hands are completely off of my keyboard, ive gone over the controls several times and even rebuilt it 3 times now and it still does it, help??

[@bend-oof]

same bruh idk

[@amonguswithyuru1727]

8:31 click the servo and toggle 1st so it will set the maxtorque to 30 so u dont have to set it to 30

[@areeanimteeaz9258]

laziness:

[@amonguswithyuru1727]

@@areeanimteeaz9258 yes

[@AsianMilsim]

OMG BRO THIS IS LIKE A DREAM COME TRUE!!!!!! I'VE ALWAYS WANTED THE HUEY! THANK YOU!

[@brandons_acc8664]

hey what are controls for it

[@AsianMilsim]

@@brandons_acc8664 It's in the description...

[@MrBearAsian]

Problems I had that can hopefully fix the problems your having: Helicopter spinning to the right/left and not getting lifted off the ground: Make sure the two motors on the centero (the rotor ones) keys are opposite for example the bottom one for forward is 1 and backward is 0 and for the top one is 0 for forward and backward is 1. This will stop the spinning and make it lift off, and note that pressing 1 and then 0 will make it fly for some reason. Helicopter not going backwards: Solution: In the front and back of the helicopter, place a small propeller engine in the back and front (facing upwards) with the settings (S for increase speed) (W for decrease speed) (Off/on only on with reverse thrust off) which will bring the nose of the helicopter back and make it go backwards. Also making sure that small propellers in the back with the same setting is removed. Helicopter when using w is unbalance from front to back: Solution: Place to small propellers in the back and (and the front!) (also making sure that its facing up) put these settings in both of them (E for increase speed) (Q to decrease speed) (Off/on only on with reverse thrust off) also making sure to remove exsisting propellers in the back. This is not garunteed to completly balance the helicopter but will help adjust the altitude of it more quicker. (to make it not go backwards just start flying it forward with w and press e/q) Helicopter might be a bit harder to make the nose point up and down So make the front control surface on the back bit forward and not into the back one and place 1 more control surface forward just infront of that one. (make sure you do it on both sides and do mistake back bit for tail because the tail rudder is ok)

[@cenawastaken]

BRUUUH

[@darthrevan5693]

It worked thanks

[@Red_09466]

[@NasPlays985]

It worked tysm

[@ryottminiex4157]

Question what's a control surface

[@georgescuadrian4102]

Love your tutorials. Sometimes i just watch them to waste time away.

[@GoldballIndustries]

Epic tutorial, one problem though, It might just be me on chroebook, but the doors seem to get stuck sometimes, maybe its the torque being so low, the torque increases the strength of the motor.

[@theuntamedoutdoors-1379]

I’m on windows with the same problem

[@Satraiascaromania]

just putting this out there, the UH-1 Iroquois wasnt actually a double bladed helicopter,since the Huey was one of the first helis,it didnt have the technology to stabilize with two blades,it had to use the sketchy little prop on the back which could be easily shot down sending the helo spiralling down.

[@supb1848]

Thanks for the tutorial! For the ones stuck on taking off this might help: On the settings of the upper blade motor, invert the keys (so that the forward button have a “One”) and enable reset

[@fisher7707]

didnt work

[@brandons_acc8664]

hey what are controls for it

[@supb1848]

@@brandons_acc8664 movement controls?

[@brandons_acc8664]

@@supb1848 yes

[@supb1848]

@@brandons_acc8664 they are on the video description

[@Cat-sj6tm]

Really the best of all tuts he did

[@prodblxssom4401]

Your content is fricking amazing and so much easier to follow than other tutorials thankyou keep making great content!

[@carmelsy4792]

Hola! i checked out your oldest vids ofc and nice tutorial!

[@elilloyd7900]

Good tutorial, quite glitchy, and it’s hard to fly up

[@jojofan12345-h]

ig

[@somerandomdude3769]

It's prob because u did tut wrong I did the same thing

[@elilloyd7900]

@@somerandomdude3769 yeah probs

[@anggichyntiaa9760]

prob

[@aeonuwu]

Same

[@Dominic-di6nr]

Bet he's making a Osprey tutorial next

[@Guycotguy3653]

On the back propeller I recommend replace the control surfaces with a giant propeller

[@Jammy_slugling]

Extremely bad recommendation, the giant propeller only will assist turning to one side

[@Exore.]

The tutorial is great, the helicopter looked nice, everything seems fine although I have no idea how the other buttons worked and my door for some reason won't close idk how u use the Q & E the Q buttons too strong and it flips my heli and the E is too strong too and my heli will end up crashing down im in mobile too so its quite hard to control I build it for 2 hours 7/10 would've been 10/10 without the bugs (or maybe its not a bug I just did something wrong thats why my heli bugs)

[@Exore.]

Turn out i actually did something wrong the max angle is set to 45° not 90°😅😂

[@USAsajs]

Is no one gonna talk about the doors?

[@Maksimsz]

10:24 The control surface can't be placed next to the other one. Solution: Move the whole helicopter some studs left/right.

[@funnycommenter6969]

yes it can

[@ferretblox2167]

they can just press R then there connected

[@amonguswithyuru1727]

its not for everyone its just a bugged spot but yeah if this happens just move it

[@USAsajs]

Yes it can

[@Maksimsz]

@@USAsajs read the replies

[@caleb6323]

when i press ´e´ and ´q´ the plane goes crazy what do i do?

[@bradsmith9031]

It flies very well, but the doors glitch a lot.

[@notjustinyeetroblox9928]

This is a terrible tutorial

[@aroundme6198]

u r right !

[@nikoplanes774]

U just press p ONE time then it doesn't glitches, not hold it, then it glitches

[@USAsajs]

@@nikoplanes774 no the door won’t move

[@schoolisapain]

OH MY GOD LOOK AT THAT BEAUTY KEEP IT UP MY MAN

[@bizzare_guy2315]

I made a really cool upgrade to this, I removed the doors and added fireworks for attacking runs

[@yonk9808]

its lovely when your mouse dies at 1 am in the middle of an awesome plane crazy tutorial, mousepad is really easy and fun to use

[@petrotall5624]

no

[@yonk9808]

@@petrotall5624 how did you find my year old comment

[@andrewkoziol5701]

It looks so cool! Every time I want to make something in plane crazy I immediately go to your channel!!!

[@CPLZ69]

For me the propeller below the top main one isn't moving and I've been having trouble while having the one below the top not spinning

[@Kenzazaashajaa]

Epic build, thank for the tutorial :D

[@JaxsonSchreiner-fs8yc]

I’m building this in the latest version of plane crazy it has a stability update and now the helicopter works perfectly

[@charlesjburner8126]

I love this just a true master piece, helps when I’m just getting started in plane crazy because I’m able to learn new techniques while making cool things!

[@daboyrivas0408]

mine kept flying but also going down idk how to make it fly do but ist ginda cool ill make an way out to make it fly

[@miro2282]

Thank you for this building! its very good and the most of all I like the doors, its opening and dclosing so good

[@FantasyGaming-2023]

controls don't work for me and even rewatched the vid

[@PuppetOneFnaf]

My Huey works fine but it goes forward on S how do I make it go forward on W EDIT: I fixed it by switching the moters

[@flapjackwastaken8500]

He starts at 0:57 Your welcome :) If you see this comment Beans

[@avg.mapper]

haha huey go brr- anyways, this is a good tutorial good thing you are making helicopters, cause i suck at building them

[@Z3ninZ]

So i have one issue. Ik you said don't complain but when you placed the propeller blades i placed them the exact same you did and my helicopter wobbled and spun out of control every time.

[@noobmanager4748]

I built it and my keeps spinning in circles and I can’t get it off the ground

[@CPLZ69]

Ok so I watched the tut again and yes I made a mistake with the helium part but now the main top propellers ain't workin :(

[@REFUT_EDITS]

2:15 i cant help with the density of the ballast block because when i put density 9 it wont stay on the helicopter

[@mariadelrefugioaguilarzapa2722]

I love your's tutorials and one thing more I like the jet the tanks the helicopters yours videos is so awesome

[@paavi530]

Themadvulpens tutorials are the beat

[@TomatoGaming2]

why is my heli moving in circles idk maybe i followed some step wrong

[@USS_Texas]

Can you do a king stallion tut (if you can) ive been looking for one of those and i found one but i had trouble following it.

[@baller7076]

Thx (btw I made it not shake and have 1 rotor)

[@Official_Zake]

Dude how even when i made this heli it still shakes

[@Funnyfrenchie28]

How do I fly it

[@thatshyguy5122]

The blades part was confusing, thankfully some guy helped me with it and it it fun to use

[@supergameryt1453]

i built mine 2 % bigger so on the doors i added extra so 4 :D

[@bend-oof]

Can somebody help me fix this? I dont know what I did wrong, but when i try to fly up it doesnt work and just spins in circles

[@lilbrodie40]

FUCK YEAH finally a tutorial on this

[@TUNETRAILMAKERS]

Emergency call to headquarters Complete blockade in the streets support comes via air we`re going to need the techno kopter

[@MclarenF1Tea]

Thank you so so so much for this, this helped alot with my plane crazy knowledge and i know have a giant Helicopter! U just got a new sub:)

[@chulpYa]

The doors do not move someone help me

[@USAsajs]

Same

[@jojosans5849]

help fortunate son wont stop playing

[@hungryhungarian1684]

This one looks better then the little bird

[@TheMadVulpen]

yes

[@USAsajs]

@@TheMadVulpenTELL ME WHY THE DOORS WONT MOVE

[@Poland-ballAnimations]

If you want it to go up press 1

[@joecraft9098]

Doors are amazing! i might use this door concept for something lol

[@Albunghi27]

As a call of duty player, this is the best fucking vehicle I have ever seen in my entire life of call of duty and military fucking vehicles

[@suze215]

I like the control surfaces idea

[@i_mog_kas]

THE DOORS DONT WOOOORKKK

[@USAsajs]

SAME HERE they’re getting stuck on nothing

[@BrexitEdit]

People who make tutorials are giga chads they teach ppl how to do it even tho they already built it so ppl who make tutorials only wants people to learn

[@peepstergamings3049]

I remember building this and finishing it, took me 3 hours to figure out how to make it go forward.

[@Cat_man1234]

How to hover the helicopter 🚁 and does it shake while pressing E and Q

[@GenevaMaeFelicilda]

the doors aint closing

[@Exore.]

Maybe u didn't set the max angle to 90°

[@semla11]

Themadvlupen can we add weapons if some people decides to make a vetnam war vid?

[@HP13mr_core]

14:42 is my checkpoint for my day

[@idiotincorproated]

"yo man whats your favorite block in plane crazy? mine is motor you?" "block" "what?" "block" "ok?" "block" "dude you're scaring me" "BLOCK" "AHHHHHHHHH!!!!!!!!!!!!!!"

[@kellyregan3180]

my half wedge triangle blocks aren't showing up

[@batterypacks]

add door: optional

[@krystalynplayz225]

How does your doors close correctly but mine likes bending before it closes

[@karsarel]

Can you help me out? The second main motor is moving but the things aren't moving

[@MobiledoPC]

E and Q not working maybe the heli is too heavy, if someone can help me.

[@The-JKQ]

For the doors to work just use for the motors instead of 45 degrees max, use 90 degrees max

[@dogenerd8801]

What button to close the doors

[@elizabethsavage2763]

to close the doors is P

[@dogenerd8801]

Thx but 0 and p wont work so I think o built it wrong

[@kakyn_online]

I made one recently but it was lagging my pc+it was slow and it wouldnt go down when I press the button for that, maybe at least this tutorial will improve my skills, thanks Vulpen.

[@weelieutenant]

probably do some modification on the setting will work?

[@kakyn_online]

@@weelieutenant tried though

[@Olimpelmo]

This is amazing bro! I love this doors!

[@TheMattlaurin]

I am confused at the first half wedge it will not be placed in the correct spot

[@moony890]

wow this is a really cool one

[@enesnente3258]

Look in my videos

[@alidoula4900]

I finally know how to control it btw this is a cool build i rate it a 100/10

[@Ivan-ow9ov]

the doors are stuck in either the opened position or the way it is in building mode and it keeps flying in circles

[@SPK_shorts]

I’m on mobile and I can’t even put the damn half wedge 1x2 it goes under or above

[@sancti3731]

Am having trouble with the doors

[@Sn1perBeen23]

mine for some reason goes slow (i dont think its supposed to do that) and it also goes down when i turn gravity slider gravity back to 180 (including when im pulling up)