Bending techniques for square pipes and metal rods // Handmade pipe bending template || DIY

[@AntoniusBoerenbrink]

Honesty , i didn't expect the tube would hold it's square profile while bending it this way. This an is amazingly simple and cheap solution. Respect.

[@JustinPaul1st]

One year later... surely there are more modern ways to do this...but it's the creativity of making that template and the end result that makes the idea amazing...And am s new subscriber👍👍👍

[@AM-dn4lk]

Very nice work. I particularly liked drawing the circle with the square. Thanks for sharing.

[@ironwelder1001]

Glad you liked the idea 👍

[@elalacran37]

How is that kept steady?

[@buffalobob7172]

I bent twice as large and thicker square tube had problems with it kinking some solved the problem with plain sand pored inside it kept the shape then pour out and weld as you did.

[@ironwelder1001]

Estoy asombrado por tu fuerza 😁

[@workonitm8]

Great ! I never would have believed that square tube could have been bent that easy.

[@restorerestoration4705]

Nice job you did on restoring the old jack

[@degeneratewelderznation]

Super sick!! I concur with the circle using the Square. Thanks a lot!! Now time for me to try it. Let's go!

[@juanpabloserranoquispe48]

Buen trabajo y siempre dando las medidas gracias maestro desde lima peru

[@leslieedgardlindop7202]

Great .comes in handy cheers les from Adelaide south Australia

[@marvinwilson-dq8ec]

Great craftsmanship, I like that bending tool 👍💯

[@zalayeta007]

Perfection yet very simple, thank you, true genius

[@marperf]

Thanks. It's nice to see someone actually weldinstead of tacking

[@JohnVHLife]

Cool tool, people still use stick welders?

[@LuisFernandoHernandezP]

ME GUSTA 👍 MUCHO LO QUE HACES, PERO TE SGUIERO QUE PONGAS UNA GRAN EXPLICACIÓN DE TODO LO QUE HACES O QUE LO HABLES, DIOS TE BENDIGA Y TE CUIDE.

[@JackieJackson-w1z]

Great video. Do you have a list of materials and thicknesses?

[@robsonrobsonlmatias4210]

Very very good!!!! 👏👏👏👏👏👏

[@juanjoseblanco1872]

Realmente me sorprendió por la simplicidad y efectividad de la herramienta , mis más sinceras felicitaciones por su altruismo , saludos cordiales desde Catamarca Argentina

[@ironwelder1001]

Muchas gracias ✌

[@roneydeoliveirayoneda8933]

🎉🎊👍👍👍 Nice. Thank you 🙏

[@guillermonieri4203]

Great tool. Thank you.

[@southern0949]

Nice and simple. Thanks for sharing. What size and wall thickness square tube can you bend this way?

[@ironwelder1001]

I bent a maximum thickness of 2 mm

[@SultánMehned]

Great. 🙋🏻‍♂️ Cusco 🇵🇪.

[@whathappened2230]

Thank you for this video! I really like your way, simple and effective!

[@ironwelder1001]

Muchas gracias ✌

[@GranPrime-ul4cy]

@@ironwelder1001 bbb

[@GranPrime-ul4cy]

@@ironwelder1001 b

[@fromthepeanutgallery1084]

Pro's always have the best skills, tools, protective gear and workbenches. Learned a lot thanks;.

[@hemtet5500]

What were those used for?

[@carloshenrymayorga893]

Thank you for sharing this video and teaching this technique to bend square tubes, excellent work!

[@ironwelder1001]

Thank you friend!🤝

[@technicware]

What size and thickness of tube you blended in the video?

[@tiredoldman5329]

Great idea! Going to have to try that! Thank you for sharing!

[@tortaotalk]

Very good idea, I've been following.

[@ironwelder1001]

Thanks 👍🏻

[@danielsaavedra69]

Great Idea!

[@MJKarangkobar]

thanks for sharing, very nice and excellent work.

[@percivalscott6636]

Wow wow wow wow wasn't expecting that

[@kentdixon5716]

Thats really cool, I have to make one, thanks for posting !!

[@Luisppk2812]

Very good. But, how to do with a circle 5 or 6 times bigger?

[@jerrylewis7702]

there is a thing called "elementary school"

[@citronmetalworks2220]

Beautiful work!

[@jackies8538]

my question is why didn't yours dimple on the inside of the outside I see some of these experts saying you got to do this and do that they all say they bend and put dimples on the inside and the outside why didn't yours it looks like it's thick.

[@tano1747]

Depends on the bend radius

[@ironwelder1001]

Whether there are dimples or not, it depends on the diameter of the metal being bent

[@franklinduarte9379]

Con esta herramienta Puedo doblar un tubo rectangular de 1.5* 3 pulgadas ???

[@joserubiogonzalez2526]

¡Genial excelente! Gran máster felicitaciones

[@letteriogallico1931]

Complimenti ottimo lavoro !

[@onesmusengineer6768]

Great job ,,,

[@leopoldsaroyan3439]

Very good ! You save my life !

[@ironwelder1001]

✌👌

[@idekreatifofficial]

Idenya mantap bos qu 👍👍👍👍

[@ironwelder1001]

✌🤝

[@romancatabay917]

Can you bend unistrut framing with this design?

[@ironwelder1001]

No! I'm not strong enough to overcome

[@ricardojimenezescobar5438]

No conocía su canal, me gusto mucho su trabajo. Quedo suscrito con campana y like. Saludos desde Veracruz. México.

[@ironwelder1001]

Muchas gracias ✌

[@adeyeraoluwaseun5288]

Awesome video!! Pls do the uneven stresses that occur as a result of that bending matter/affect the strength of the rod?

[@ironwelder1001]

No. A circle is always stronger than a straight line

[@mervynfriesling2384]

Great idea, but the music is irritating.

[@jaystone766]

Volume button?

[@joelongstaff7601]

Great video Sir thank you. What was the wall thickness of that tubing? I am now a subscriber looking forward to more.

[@AbdullahHernandez]

Wow, that one handed cut on an angle grinder was simultaneously incredibly impressive and horrifying to watch.

[@estelamedina7941]

pocas manos blancas se ven trabajando .solo veo manos negras trabajando hasta el momento .victor

[@ironwelder1001]

la forma en que es

[@gokilchannel6485]

tehnik menabjubkan...

[@argenisuceta]

ESO ES UN PERFIL (PTR) CUADRADRO DE 1'' X 1'' PERO PODRIAS DOBLAR TAMBIEN 2X2 O RECTANGULAR 3X2, 4X2, ETC???

[@sayedirfanurrahman8787]

10/10 Great Job

[@manuelantoniovargas2121]

Estas matrices solo sirven para trabajos en serie Pero mi taller recibe trabajos muy variados

[@randallmccorquodale3290]

Great video. Thanks for posting!

[@ironwelder1001]

Thanks bro

[@manuelfuentes4693]

EXCELENTE VIDEO. PEROOOO CUANTO ES LA MEDIDA DE CADA DETALLE. MI HNO XFAAA

[@orionasociados1565]

Buenos días quien me dice qu calibre ti n que s r el tubo para que no se aplaste y sea tan fácil de Aser 5:35 5:35

[@delipambaram3392]

What size tubing you bending

[@GUSTAVO-i3r5f]

Exelente!!!👌🏻

[@AdiLas-my3xb]

Sungguh kreatif sangat membantu dan menambah wawasan

[@JagathPalitha-f8b]

Very nice thank you

[@aliorr9356]

To make the mandrel I have seen people use a cars rear brake disc. It’s a good solid handy instant perfect circle

[@zapa1pnt]

That could, certainly, be good. You just have to make sure whatever you use will fully support the material you will be bending, to avoid possible distortion. 😁✌🖖

[@CraigHollabaugh]

That's impressive. Thanks, I have some new ideas now.

[@SurenderSingh-lp4cp]

can we bend flat bar also ?

[@ironwelder1001]

Yes, sure

[@norcoatomik1]

Sick jig man ill def use this to make many things . Thank you haha

[@dennynugrahanatajaya6665]

wow verry amazing you are so genius sir. good luck

[@ironwelder1001]

Thanks 🤝

[@narrowroadtransport8318]

Badass 🎥 I had no choice but to subscribe after lol great work

[@ironwelder1001]

Thank you friend 👍🤝

[@jorgegabaldon5069]

Que calibre es ? Y mesida del perfil !!

[@ricosalditos4570]

Perfect 👍

[@cddvdbluerai]

Top das galáxias...

[@bengkellasndeso4913]

Sangat kreatif 👍

[@marcossuelos5883]

Parabéns perfeito 👏👏👏👏

[@ironwelder1001]

Obrigado 👍

[@luisguerra3644]

​ 😅😅😅😅😅buenos

[@johnjohnson6196]

Why does this work? Why don’t the sides crimp or collapse?

[@ironwelder1001]

Because bending occurs in a smooth circle

[@brianb-p6586]

It will crimp, depending on the combination of bend radius, tubing size, wall thickness, and metal alloy and temper.

[@Ponimancp]

Sangat bagus hasil nya ...

[@codingchewie]

What’s the spec on the square tubing?

[@dellamphear9367]

Outstanding!!!

[@jacquesmartin9370]

Perfect bon bagay much Bueno great

[@ironwelder1001]

Thanks 🤝

[@manuelfonsec3631]

Me gusta su técnica de doblado May gracias

[@jaimesaavedrap9437]

exclente un saludo,, y para un circulo de 40 cms de radio

[@odenkediri]

Apakah bisa untuk pipa besi yang lebih tipis ??

[@ironwelder1001]

Tentu saja

[@JustJereInCalif]

Really well documented by your video; and, nicely executed fabrication. Kudos!

[@tracollgreg78]

Simple tool but great results

[@j4junaid917]

Good job bro

[@wimdekoker9153]

Brilliant!!!

[@juancortez4726]

Awesome! Thank you!!

[@ironwelder1001]

Thanks

[@mariooddoero2389]

Que espesor es el caño que usa

[@ironwelder1001]

1,5 mm

[@pintobengkel8112]

Hadir nyimak boss

[@davefuzzforrow6627]

Nice idea👍but easier to get some old wheel rims and modify them so you get different diameters 😉😉

[@ironwelder1001]

With rims, everything is much more precise.

[@felipeaca]

Mi bro tiene todo un taller pero no tiene compas

[@martinwahyudi3081]

Amazing.... Thank a lot...

[@dnyaneshwarlolge7011]

Best 👍sri🔨🔧📎⛓️

[@ironwelder1001]

Thanks 👍

[@ferwinrodrigo7480]

Anu poh size limit Nyan s square pipes?

[@diyrunprods]

It's a pity that the radius cannot be adjusted, but it's a very cool device.

[@ironwelder1001]

Sí, para cada radio necesitas hacer un conductor separado

[@Elcartel_24]

Nice🎉

[@juanzimbron5202]

Very good video...thanks for sharing

[@ironwelder1001]

I'm glad you liked it 🤝

[@JoseLopez-ci9gg]

Excelente maestro gracias por compartir

[@ironwelder1001]

✌🤝

[@davidmstein1149]

Perfeito 🇧🇷👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👏👏

[@ironwelder1001]

Obrigado 🤝🤝🤝🤝🤝🤝🤝

[@joetigwelder]

What is the arc rod that you are using?

[@chrishill6276]

Shitcraft. Look at the crappy welding.

[@jorgearturofonsecahidalgo5875]

i love it

[@jimrt1738]

Nice jig 👍

[@ironwelder1001]

Thanks 👍

[@nationalwelding9463]

Nice work bro

[@ironwelder1001]

thanks bro

[@GMetalArt]

Nice ideas

[@ironwelder1001]

Thanks 👍

[@sawargijayalas]

Kerja bagus mantap