Bendix Fuel Pumps! Original VS Modern/Plus Bonus Podcast video link!!

In this video we will take apart and restore and original bendix file pump.
Comparing original with new modern options.
Plus included is a recent video Podcast link with Mike's Restoration and Der or Die Porsche Podcast channel.
• Another Nerd Builds Re...
www.hardtclassics.com.au
For recommended restoration supplies: www.amazon.com/shop/mikesrest...
Music by KZbin Audio library:
Freeling by Lauren Duski
Sonic Pogo by Vons in Japan
#porsche #classiccars #aircooled #barnfinds

[@27jpski]

Amazing job again Mike! I hope you can keep it as original as possible as long as it doesn’t affect the fuel flow or leaks. If anyone can do this it’s you 👌🏻

[@MikesRestorations]

Thanks JP I appreciate your vote of confidence=) Cheers!

[@albertbione7638]

Great video

[@MikesRestorations]

Thanks Albert!

[@Anti-Static_Matt]

Hi Mike, another great video. Could you put a fuel filter in the original pump and then, as you said, make the new pump look like a filter. Then it won't look like it's got two filters. Have a great week.

[@MikesRestorations]

Hi Matthew A good idea but the inside of the pump is too small..I think it will be possible to hide or camouflage in some way where as its not visually an issue.. Still going through lots of test though. Will keep you posted on the outcome! Cheers

[@restoblastrestoblast154]

Hey Mike, looking good, I'm just thinking, with the amount of effort you have put in to getting this car correct. I honestly think that you are better off buying another new bendix pump & making the banjo's ect look oem, that new pump looks more kia, the porsche to me. It's the last piece in the puzzle.

[@MikesRestorations]

Thanks Resto Verdict is still out on how things play out.. More testing and careful observation. Will let you know what I decide! Cheers

[@Andrew-vx2ls]

Interesting video. Thank you Mike. I may reach out to Mr Hardt as some manufacturers used Bendix pumps as external oil pumps for differential cooling I believe (Lotus for example). Does anyone reading this know if it was this model?

[@MikesRestorations]

Hello Andrew seasons greetings Ive not heard of that but Lotus was pioneer in many many ways! Mr Hardy would definitely know more on that Cheers!

[@Andrew-vx2ls]

@@MikesRestorations Hi Mike, in period, there were very few pumps available (SU, Bendix in Europe and possibly Holley and Mikuni (?),). In the official "racing" spec for the Elan included a Bendix pump (without a precise reference). The photos I have seen tend to confirm my suspicions!

[@jeffhammond8969]

Any possibility that if you gutted the original that you could fit small aftermarket pump inside the original housing and hook up inlet and outlet of original to the ports on the aftermarket pump?

[@MikesRestorations]

Hello Jeff It's not likely as the piston differs in specs, Also the main reason the original pump can't be reused would be the counter wear inside the cylinder. The tolerance is critical to make them work. Not sure I'll even be able to get the newer pumps going again for the same reason. They are sensitive. Thats mainly the reason I'm leaning more toward a modern style antiback flow pump. The Bendix pumps original and newer style do not prevent drain back. This will eventually prematurely over work them on start ups and eventually early failure. More testing in the mean time though Great question !

[@jeffhammond8969]

@@MikesRestorations I was actually thinking if you could just use the Bendix housing with literally nothing inside it and fit the new style pump in it's entirety inside the Bendix housing. Fuel in to the input flange on the Bendix and a stub line on the interior to intake on the new style pump and same for output. Then it looks original and has performance of the new pump. But I fear that new style pump might not have a small enough diameter to fit fully inside.

[@MikesRestorations]

Good Thought Jeff! The problem with the Bendix pumps it that the space inside the housing is extremely small. Nothing can be removed other than the filter and piston. If we could hollow it out you would defiantly be on to something!@@jeffhammond8969

[@sylvainhelie9275]

Can you restore mine? I got similarly one. The ground is negative, installed for 12volts and 4-5.5 psi performance. Thks. Let me know.

[@MikesRestorations]

Sylvain Can you send me some detailed photos.. I will have a look and see what's possible. send to: [e-mail]