Benelli M4 Modifications Tutorial | Bolt Release, Magazine Tube, Safety, Bolt | Part 1

BENELLI M4 FULL TUTORIAL ON UPGRADES - PART 1
~This is my complete tutorial on how to upgrade the Benelli m4. I made this tutorial because I wanted a Benelli owner to be able to watch this video and be able to upgrade many things without watching many videos that take too long to explain everything. Also, I try to explain and go into as much detail as I could.
~For the record, in part 2, I will be removing the magazine tube in which a heat gun IS needed to melt the Loctite. I will be installing a full-length 7-round magazine tube, not just a +2 extension.
~I separated the video into separate parts just in case you're only here for one or two specific upgrades. Here is the breakdown:
00:02:35 - Disassembly
00:05:15 - Enlarged Saftey Button
00:09:12 - Larger Bolt Release
00:15:05 - Partial Assembly
00:16:18 - Large Bolt
Part 2 - Spring/Follower
Part 2 - Full Length (7-Round) Magazine Tube
~Enlarged Saftey Button
~Larger Bolt Release
~Large Bolt
~Follower
~7-Round Full-Length Magazine Tube
~Full Length Magazine Tube Spring
~This is not a review of the firearm. If you want to see my thorough review of it, click: • Benelli M4 Tactical | ...
~Link for Benelli M4 Upgrade Part 2: • Benelli M4 Modificatio...
~Link for Benelli M4 922(r) Upgrade Part 3: • Benelli M4 Modificatio...
~A major question people have regarding this gun is: is it worth the $2000 price tag? ABSOLUTELY YES. Don't buy a Mossberg 930 or Benelli M2 or something similar if you don't have enough money. Will you be satisfied with one of those other guns? Yes, but only satisfied. Save your money until you can buy the M4. The Benelli M4 is a top-notch shotgun designed to fire anytime, anywhere, with any ammo, in any condition.
~Unfortunately, due to KZbin's new, albeit biased, policies on what can and cannot be featured on their site with respect to firearms and ammunition, I have to revise my descriptions. So, I will be unable to put links in the description or video that lead to firearms, accessories, or ammunition. Of course, you can simply Google the name of the entity in which you are looking for. But, if truly can't find something by Googling it, just let me know in the comment section and I will do my best to get back to you.
~Thanks for watching and don't forget to LIKE and COMMENT on this video...especially if you've enjoyed it
~SUBSCRIBE if you want to stay updated on each new video of mine, or you just like what you see on my channel: / elitekickboxer
~You should definitely check out my other videos - which include ELECTRONIC MUSIC MIXES, AIRSOFT REVIEWS/WARS, FIREARMS, and many other INTERESTING MISCELLANEOUS things: / elitekickboxer
~If you're interested you can view my other channel: / elitekickboxer98

[@judymonk3672]

Dude you’re awesome. I followed all your instructions step by step and did all the upgrades plus installed a Hayl-Rail from Strike and a vertical folding grip from LWRC. Yes I fucked up a few steps and had redo lol, you live n learn Brutha..Thx.

[@adrianramirez3166]

How good Is the hayl rail ? I just purchased my benelli yesterday and I hate that stock look. I’m looking into the hayl rail, picatinni rail or m lok

[@dougwilliams44]

Indeed! Once ya dona few Trigger/Hammer swaps, it gets REAL fun..🤘🏼⚡️🦈

[@maxdoner3903]

Excellent video! Very helpful. Much appreciated!

[@cbowtie33]

Great vid man im interested to see if the new mag tube matches the original finish of the gun

[@tshanks1771]

cbowtie33 I just got this magazine tube from the same spot and the color is definitely different.

[@philly9957]

Great vid.👍.... thank you.

[@dougwilliams44]

Great Video! Things are changing under our noses, (and we arent being told). I would say: While at it, go for 922r COMPLIANCE. Buy these parts "Made in USA", When you go TO an adjustable stock, YOU MUST, have no more than 10 parts IMPORTED WITH the Weapon. So you need to make 3 parts NON-BENELLI!(Trigggers are for the VERY patient, But will count as 3 parts.) [The Follower #1] [The 7 round Mag Tube #2] The stock itself, can be found for little over $330. There is your compliance. I had MY channel "Suspended" for showing Benelli Lovers how to COMPLY. Not asking for "Clicks" and I don't sell anything. It's the world we live in now. Safe Shooting! 👍🏼🙏🏻💥

[@DRLA616]

Has anyone had trouble removing the pin for the bolt release button? Mine seems really jammed in there even after a lot of good hits... cant seem to take it out.

[@gunswnc]

thank you

[@AARRALX]

So all you gatta do is have 10 or less Italian parts all I gatta do is switch up is 3-4 parts to hold 7 and have an adjustable stock ?? That 922 law

[@yunassaxer7119]

great!

[@ylafla]

Where and what is the model of the bolt release?

[@RaysGoneFishing]

Does the larger charging handle interfere with the new mag release since it’s not sitting flush?

[@ELITEkickBOXER]

Not at all. In fact, having both the larger charging handle and slide release makes it even easier to operate the firearm. Plus it looks a bit spiffy not having tiny baby handles/buttons

[@ELITEkickBOXER]

In seriousness, it doesn't interfere at all. Not sitting flush enables it to be felt without looking with ease.

[@RaysGoneFishing]

EKB thank you!

[@JohnDoe-zg6fn]

👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@Kilo416]

What brand of enlarged safety is that? Hard to find one with the red indicator ring I find

[@ELITEkickBOXER]

Honestly, I'm not 100% sure. It might be Freedom Fighters Tactical, but I don't remember paying like $100 for it. But looking at the video, it could be a "ROTH Oversized Safety Button"

[@mashameri7019]

Where did you get the Benelli OEM magazine ?

[@ELITEkickBOXER]

www.benelliparts.net/store/p2/Benelli_M4_7_Round_Magazine_Tube_70052.html

[@mashameri7019]

EKB thanks, unfortunately they are sold out !

[@ELITEkickBOXER]

I know, I saw. I'm sorry. If you're okay waiting definitely recommended getting that. As I feel the full length looks better than the +2 extension. But that's a personal choice. Also, i know if you google it, other companies make their own version, maybe even better quality. Of course, it's your choice.

[@xjrob85]

I find it difficult to push shells past the factory shell catch into the magazine. Does the GG&G kit with the new shell catch make loading the magazine easier?

[@ELITEkickBOXER]

I haven't tried that with the factory shell catch because I immediately changed it to the GG&G one, but I can tell you that I don't have any problems like the one you're describing.

[@xjrob85]

Thanks. I ended up sanding and polishing the shell stop, and now it is much improved.

[@brandon01776]

It's a alot of testicular fortitude to push that tube in on the 5 shot tube with the 7 round factory spring that is in the 5 round tube lol

[@dmahe76]

compatible with the canuck operator?

[@ELITEkickBOXER]

Honestly, I'm not sure. You'd have to contact the business that makes that and ask them if benelli m4 parts can be used inside it.

[@MyShapeofmyHeart]

Where do you get those punches

[@ELITEkickBOXER]

Amazon: www.amazon.com/gp/aw/d/B01N1HXR7A?psc=1&ref=ppx_pop_mob_b_asin_image

[@nickhyslop5743]

922R compliant?

[@ELITEkickBOXER]

Of course.