Benelli TnT 135 Yoshimura pipe install & remapping the fuel injection.

[@4N2IN0JA]

After watching this I can fly through an installation. I showed this bike to my wife and she is in love. She’s planning on getting one soon, so now I’m scouring KZbin for videos on the Benelli. Thank you for making this video. I respect your thorough technique and I learned quite a few things.

[@KrakensGarageandAdventures]

Thank you, putting out another harley video and then I'll get to the oil change video on the TnT. If you guys are near VA, hit me up for a test ride on mine. Eric

[@scpatriot4786]

Great job. Really enjoying your info on the Benelli. More ECU info would be great!

[@KrakensGarageandAdventures]

I'm glad these videos are helpful to you on your TnT. Thanks for the kind reply.

[@BikesBeardsAndBrews]

Love me a Yoshi pipe, when I had a ninja I always wanted one but couldn't afford it back in the day. Nice install and great pipe!

[@KrakensGarageandAdventures]

Man! What the heck are you doing looking at my old mini moto content?! 😂

[@ErKing-zj4pl]

I have a Yoshimura exhaust on my tnt135. Along with the Chimera intake. Still on stock ecu. No issues. I find the bike more responsive and seems more peppy 👍. You can disconnect both battery leads and just make them both touch for 60+ seconds. It'll reset the ecu that way. Thanks for sharing the video 😎

[@KrakensGarageandAdventures]

Right on! 😎 Thank you for watching and commenting. 🏍💨

[@SirkuloTV]

how to do it? should i turn on bike while doing it? pls teach me

[@boomerhgt]

It's just louder you just think it has more power it's all in your head

[@ramangeorge6229]

Did you have to get it tuned after? I put on the chimera exhaust header and will be putting in the chinera air intake as well.

[@Mariasbabyalive]

That pipe made the bike look so clean. Great video with good instructions I watched the whole video and I don't even own a Benelli.

[@KrakensGarageandAdventures]

Thank you for the kind words!

[@Jeremy_Behnken]

Same 😂

[@tshortbull8683]

Definitely a good vid. Is this the only pipe they make? What model? I wanna order. I did not know how to reset the ecu. I replaced the muffler on my scout but didn't reset. Gonna just do that quick.

[@muhammadsteinberg]

You really got that Wayne's World look down pretty good. Great install vid!

[@KrakensGarageandAdventures]

🤣🤣🤣 glad you enjoyed it. Eric

[@joeypavron7015]

In my personal observation, the stock pipe still sounds better, so I would still go with the original pipe

[@KrakensGarageandAdventures]

I have to agree Joey, the noise and vibrations thidnpipe caused were terrible. I sold it a month later and went back to the stock pipe. Happy New Year!

[@darydavid4270]

Wow yoshimura exzos in benelli 135 TNT looks beautiful

[@KrakensGarageandAdventures]

Dary David, I like them too! Wherever I go people come up to me to talk about this bike. Thanks for watching brother!

[@stevensalemi6395]

We need to know whether this upgrade was worth the effort and the expense.

[@KrakensGarageandAdventures]

I go into detail on this. Eric topic on my 1 year review. Check it out here. kzbin.info/www/bejne/qXrLn2iQapKMl68

[@akiraproject2424]

Can't find anyone who sells this exhaust. Been looking around for a week or so now. Taking notes on your Benelli videos. Just picked one up 2 weeks ago

[@KrakensGarageandAdventures]

Congratulations! The Yoshimura pipe was discontinued, so if you find one, it will be used. There's a lot of basic maintenance videos o made on this bike. I hope it helps you.

[@DoRC]

You actually need to make sure that the positive lead touches the negative lead. Just touching the positive lead to the negative post on the battery doesn't work if the negative lead isn't connected to the negative post of the battery.

[@KrakensGarageandAdventures]

That's a very good point. Thanks for sharing.

[@armdrop101]

How do you know it works?? Groms you can see the check engine light lash indicating the reset was a sucess.

[@DoRC]

@@armdrop101 it has to work. Basically what you're doing is draining the capacitors inside the ECU which prevents it from continuing to hold on to its memory.

[@jakespeed9419]

Looks so clean. I want to get a 135 and the same exhaust!!

[@KrakensGarageandAdventures]

Sadly, Yoshimura discontinued these pipes, and you'll have to find one used. Thanks for stopping by and commenting. Eric

[@albertollorca5249]

Removing the huge catalitic converter should have increased your ground clearance. Have you measured to see what your ground clearance is now with the new exhaust? Thanks

[@KrakensGarageandAdventures]

Yes it does by about an 1".

[@cathyn1033]

Great job Eric. Your editing is getting better and better each video. 👍

[@KrakensGarageandAdventures]

Thank you for watching and commenting.

[@boomerhgt]

Great videos I changed my TNT exhaust a year ago but it was way too loud and not a good loud like my VMax .back to stock a lot easier to live with plus it's not a great idea to get rid of the cat

[@KrakensGarageandAdventures]

Agreed, I'm going to pull mine and put the stock back on and sell the Yoshi. Thanks for watching.

[@603adventures9]

@@KrakensGarageandAdventures I'll buy it

[@marcd4778]

great video... love all the close in camera shots!!

[@KrakensGarageandAdventures]

Marc, thanks for the kind words and watching. Seriously, it means a lot to me. Ride swift, Ride safe. Eric

[@americandad4864]

Did you just chose that muffler because it was the most expensive one you could find ?

[@KrakensGarageandAdventures]

No. It was on closeout on Amazon and I purchased it for $250.

[@viciousviolet3783]

So what’s your thoughts on this exhaust? Any more power or top speed out of it?

[@KrakensGarageandAdventures]

Not really anymore speed but I will say it's faster to accelerate.

[@Gregs_World]

That really came out great fantastic video and audio you are really creating a wonderful channel here, Eric thanks, as always, for sharing with us

[@KrakensGarageandAdventures]

Thank you for watching.

[@jeremycubs8331]

I don't know why the 135cc isn't available in the UK 😞 we only get the 125.

[@KrakensGarageandAdventures]

Jeremy, I'm pretty sure it has to do with your motorcycle license level and the 125 fill a spot for beginner riders. It is a shame you don't get the 135. Tha KS for watching and ride swift, ride safe.

[@bakercompanygaming947]

I would love for you to do a video on a aracer mini 5 ECU. I almost want to buy you one and have you do a video

[@KrakensGarageandAdventures]

Ha! I appreciate your confidence in me. If you get one and do an install and have issues, just reach out to me and I'll do what I can to help. Eric

[@andrewwisneski2664]

Eric how do I reset my ecu the right way I put a kandN cold air intake in 2 days ago

[@KrakensGarageandAdventures]

Disconnect both terminals on your battery and ground out the positive (red) on bare metal on the bike.

[@MiniMoturd]

Hey Eric, was wondering if you noticed any gains in power after installing the exhaust? Kind of in the same boat as you, I like my quiet exhuast. But if there was some type of noticeable gain in power I might not be opposed to an exhuast.

[@KrakensGarageandAdventures]

I can't say there was any gains in power but I will say that it smoothed out the power band and got there a tad quicker. I've said I'm going to most likely take it off and sell it. Let me know if you're interested.

[@MiniMoturd]

@@KrakensGarageandAdventures Okay, thank you for the input....probably just leave it as is...its like being on stealth mode lol. thanks for offering the exhuast though👍🏍✌

[@richcaspar1300]

Eric, can you tell me the reason you would take it off and sell? To loud? Not enough performance difference? Thanks Rich

[@KrakensGarageandAdventures]

@@richcaspar1300 Rich, it's a little too loud for my taste. Astedically I love the look of the Yoshimura. Power deliver is necessarily "more", what it does do is flatten out the power curve so you have more usable rpm range.

[@boomerhgt]

Kraken's Garage & Adventures I had my new system on for 30 mins and reinstalled the stock way too loud ..ok if your 16 years old but not 64 like me a waste of my money I should know better....loving your videos though awesome

[@coopergregory249]

Where can I buy one?

[@KrakensGarageandAdventures]

These were discontinued 2 years ago. At best you might find a used one. Good luck.

[@nicholasventura4107]

Do you have video on rear license remove it

[@KrakensGarageandAdventures]

I don't and mist likely will not post one. If you remove the ugly rear plate and guard you have no rain protection and will get a strike up your back in wet conditions.

[@larrynorsworthy8582]

I just got a 2022 model in the same color. After the break in is done, and after the first service, if it will do maximum rpms in 5th gear, why change anything?

[@KrakensGarageandAdventures]

Larry, absolutely nothing to change, The bike is fit right out of the box. I sold that pipe after 100 miles. The noise and vibrations it caused were terrible. Thanks for commenting. Eric

[@importantstuffandothers4579]

Man extra detailed job!!!!And yoshimura exhaust looks exxelent, like from its mother.

[@KrakensGarageandAdventures]

Thank you much appreciated. Keep an eye out for a detailed "how to" on adjusting your valves.

[@importantstuffandothers4579]

Sure i will

[@RLTW6]

Sounded good before, but better after.

[@KrakensGarageandAdventures]

LOL for 135cc beast of a machine.

[@anip1259]

How long does it normally take for ecu to learn new pipe?

[@KrakensGarageandAdventures]

Usually 10 seconds of holding the wires to the battery. Thanks for watching.

[@robmcgregor8759]

Hi looks cool, just wondering did you not use paste or sealant when fixing the pipe to the engine?

[@KrakensGarageandAdventures]

Hi Rob, no I didn't. I did replace the exhaust gasket which you should do every time you remove it as it's a crush gasket. Thabks for watching and commenting. Eric

[@drumdriven5460]

I put a pipe werx on my tnt 135 but never unhooked the battery or reset anything cuz i didn't know about it. Can i still do? Been a couple hundred miles since i installed exhaust. Thanks luv the videos!

[@KrakensGarageandAdventures]

Drumdriven, you should no issues re-flashing your fuel mapping by grounding out. Good luck!

[@systemfile]

Check your spark plug color to see if you have a lean condition.

[@ahmedosmaan9176]

my dear please i need your help as my bike suddenly became hyperated and get heated very soon ..i need to reduce fuel injection?? ..how i contact with you

[@KrakensGarageandAdventures]

Ahmed, If it's over heating, check the oil levels fast! It doesn't hold much oil and losing a little will have a huge impact on the heat temps. I would also suggest you join and post your questions on the Benelli TnT forum on Facebook where you will get many replies quickly to get you some help. Eric facebook.com/groups/officialbenelligroup

[@LUKAS-RACING]

Mine lost power after the Decat :(

[@KrakensGarageandAdventures]

I didn't get any hp gain but got all the vibration and noise so I went back to stock and sold the pipe. I hope you get it sorted. Eric

[@toffeeavatar5011]

How about a 14s sets of wheels maybe? Cheers.

[@KrakensGarageandAdventures]

I've been kicking it around and may give it a shot. Ride swift, ride safe. Eric

[@benriding8678]

Great video's! Where did you find the black rim decals for the TNT? Thank you.

[@KrakensGarageandAdventures]

Ben, they came stock on the bike. Mines a 2020. Hit up your local dealer and I'm sure you can order them.

[@benriding8678]

@@KrakensGarageandAdventures will do, I just picked up the same bike & color today. Very excited to get the motor break in period over with!

[@KrakensGarageandAdventures]

@@benriding8678 congrats! Hit me up if you need help.

[@1time39]

Hey great Video!! I’m not sure if it’s available but I’m interested in purchasing your exhaust set up if it’s not already sold??

[@KrakensGarageandAdventures]

I'll pull it off in the next week or two. Thanks for watching and commenting.

[@1time39]

No problem.. Keep me updated when ready to sale.. Thanks!!

[@KrakensGarageandAdventures]

@@1time39 send me an email at [e-mail]

[@DaveCapamagian]

Hi, thanks so much for all the video's on the TNT 135, these are so helpful for doing the mods on my bike, just amazing. Would you happen to have a wire digram for the TNT 135, I am trying to install the ST2 brake modual and the turn modual and need a wiring digram to complete. Cheers in advance Dave

[@KrakensGarageandAdventures]

Hi Dave, Here's a link to my dropbox with the most current service manual (2021), around page 425(ish) should be the wiring for you bike. Let me know if that doesn't work for you. Thanks for stopping by! Eric. www.dropbox.com/s/j53yc6dukca60g5/Benelli%20TNT%20135cc%20Official%20Full%20Service%20Manual%20%282021%29%20.pdf?dl=0

[@owengune]

Great video🙂

[@KrakensGarageandAdventures]

Thanks for the visit!

[@CalvynLee]

Greeting from Benelli TNT 135 / TNT 125... great sharing 👍

[@KrakensGarageandAdventures]

Thanks so much for watching and commenting Calvin.

[@Evans1091]

I've had the Chimera air intake installed for some time on mine and the ARacer RCmini5 with no issues. I installed the Chimera exhaust header today and now the idle RPMs randomly go up to ~2krpm and back down to around 1.5krpm. What could be causing this? It will stay at around 1.5k like normal and then jump to 2k for a few seconds and go back down. Any suggestions? Only change was swapping the header that caused this.

[@KrakensGarageandAdventures]

I think the combination of the pipe and the air intake is most likely the culprit. I think you will need a fuel mapping pack to settle it down. The two changes you've made are out of the fuel mappings capabilities.

[@Evans1091]

@@KrakensGarageandAdventures do you have the Aracer ECU? If so are you able to send me the MAP or offer any suggestions on what to change?

[@KrakensGarageandAdventures]

@@Evans1091 I'm sorry but I do not have one. I'm running a stock air box and pipe. I sold the Yosh as it was way too loud for my taste.

[@lokaloka9065]

Hi Eric, I want to get that bike I'm 48 years old, and it's my first time to ride a bike, do you recommend it to me? The seat are comfy or not?

[@KrakensGarageandAdventures]

Loka, I turned 59 last week so I get it. It's ramped as it is a mini motorcycle. The seat is nothing to get excited about regarding comfort. That said to rip around at wide open throttle and not break any laws is a hoot. Would I reccomend it? Yes

[@lokaloka9065]

@@KrakensGarageandAdventures thanks a lot, and good luck on your channels, it's useful.

[@wearejungians]

Would this be the same for the 2021 version TNT 135?

[@KrakensGarageandAdventures]

Yes, they're identical so it will work on either year. Thanks for watching. Eric

[@eddies7778]

Thanks very helpful

[@KrakensGarageandAdventures]

I'm glad it helped.

[@603adventures9]

Do you have to remap if all's you do is change exhaust?

[@KrakensGarageandAdventures]

Yes you should and it's super easy. Pull the positive and negative battery cables and ground them out strategy on the frame somewhere.

[@603adventures9]

@@KrakensGarageandAdventures you wanna sell that exhaust buy it today

[@KrakensGarageandAdventures]

@@603adventures9 I'm sorry it's already sold.

[@EdwardZazzara]

Thanks!

[@KrakensGarageandAdventures]

Thank you, Edward. That's very kind of you, sir. Cheers. Eric

[@Sealteam556]

Where I can get my ECU FLASHED ?

[@KrakensGarageandAdventures]

You can take it to your local dealer and they should be able to do it. You can try to disconnect your battery cables, hold the positive cable to bare metal and reconnect them. Ride the bike 20 miles and it should learn the new fuel mixture. Eric

[@Sealteam556]

@@KrakensGarageandAdventures thank you

[@SGTDuckButter]

You got the last pipe, the links don’t work.

[@KrakensGarageandAdventures]

Yes, I think Yosh put the last of them on Amazon to blow them out. :(

[@Kris_P._Bey_Ken]

At the 7:55 mark, what is the purpose of that spring?

[@KrakensGarageandAdventures]

Kris, the actual muller can is only held on with 2 of those springs. Very common on m/c mufflers. It makes it east to remove the pipe to service either the bike, many bikes you have to remove the muffler to remove the rear wheel. (think duel pipes on a bigger bike, one on each side of the rear wheel. Thanks for watching.

[@Kris_P._Bey_Ken]

@@KrakensGarageandAdventures so the springs are holding the pipe together at the seam?

[@KrakensGarageandAdventures]

@@Kris_P._Bey_Ken Yes.

[@Kris_P._Bey_Ken]

@@KrakensGarageandAdventures got it, thanks. 👍

[@KrakensGarageandAdventures]

@@Kris_P._Bey_Ken anytime Kris, this is why I started my channel to help riders. Thanks for watching. Editing a "how to " adjust your valves on the TnT tonight.

[@SpikeyOfficial]

Brilliant vid mate. I just got my new full exhaust fitted and my bike has trouble starting cold. Hopefully this will reset my ECU

[@KrakensGarageandAdventures]

Thank you! I hope it helps you, post a comment when you get it installed.

[@SpikeyOfficial]

@@KrakensGarageandAdventures It didn't work for me but it could be something else. Just not sure what 😂

[@boomerhgt]

Spikey Its not worth the hassle man leave the stock exhaust on it's gonna run sweet

[@succubus1]

ヨシムラ排気音最高! 日本で売っているのかな🤔

[@KrakensGarageandAdventures]

彼らはここ米国ではそれを中止しました。私はZX4RRを購入したところですが、ヨシムラは私のバイクに適合するZX25R用のパイプを製造していますが、米国では販売されていません。ヨシムアの非常に奇妙なマーケティング。

[@cjstennett]

Just fyi they discontinued the muffler

[@KrakensGarageandAdventures]

Well damn... actually I'm thinking g of taking mine off and going back to stock.

[@KrakensGarageandAdventures]

@@drzpapi1234567890 Marcos I already sold it to a viewer last month. Sorry

[@MiniMoturd]

Awesome man!!!

[@KrakensGarageandAdventures]

Thanks for watching and commenting! Means a lot to me.

[@MiniMoturd]

@@KrakensGarageandAdventures Thank you for all the work you do on your videos...very informative and have helped me out a lot. Loving the "benelli tnt 135" and can't wait for the next vid!

[@joereed7326]

So has anyone seen a high milage tnt??i I ove em,,4v 5sp,just not geting one till i hear of one whith kms on it ,im in Australia ,very hot,,

[@KrakensGarageandAdventures]

There's a group on Facebook and a fellow asked that question. I guy replied 40,000 miles! That's not verified but damn!

[@joereed7326]

@@KrakensGarageandAdventures nice one,,,ive seen 15k kms on one at a dealers in Victoria aus,,,thay are a bonkers cool bikes,,,im looking at them,,one thing i hear in is owners of these units should get into rubber mounting every component,black silicone ,rubber washers,,🍀💪

[@KrakensGarageandAdventures]

@@joereed7326 i agree with the rubber mounting starting with the exhaust. Poke around the FB page and ask the members who has the highest mileage and you'll get answers globally. Good luck and hit me up if you need any help. 🏍💨🐙

[@tjridez6331]

your video started repeating at 9mins 40 sec

[@KrakensGarageandAdventures]

Yes, my editing was very bad when I was learning. Thanks for letting me know.

[@Chalto]

Great idea to play shitty music over the sound of the exhaust, which is the only reason I watched this video.

[@KrakensGarageandAdventures]

Sorry about that Gordon, I had just started my Yt channel and it is bad.

[@Chalto]

Ah ok, sorry I was ott , not normally quite such an asshat 😉 The Benelli is a great little bike though. My son has just got one as his first m/c 😎

[@KrakensGarageandAdventures]

@@Chalto Gordon here's a link of the sound bite I took with no music. I hope this helps but the camera never takes a good sound recording. vimeo.com/457570969

[@5oja11]

اسلم ارجوك ان الاسلام هو دين الحق

[@KrakensGarageandAdventures]

Nothing wrong with that.

[@kd7129]

Y M C A 🤣😂

[@KrakensGarageandAdventures]

You caught that! 😂😂😂