Best Handheld Portable Printer! MBrush (PrinCube) vs Evebot PrintPen

[@pp-jh4ig]

I'm a print technician, the "eco solvent" cartridge what they call "permanent" prints only on heated plastic surfaces (PVC/PET), DTG ink could print onto garments but needs different printhead which is way too expensive for a toy (piezoelectric instead of thermal). UV is the only type of ink that could print on surfaces that one would expect from this gadget but a UV pritnhead alone costs $2000 so it won't happen anytime soon.

[@farisdewanto6281]

Did work at glass ?

[@movingforward9555]

I can't deal with typewriters any more, but unfortunately I need them for the specific work I have, do you think this could replace a typewriter? I need to be precise and it will be used for small spaces. Thank you.

[@Tangowastaken]

I subbed the moment you started the splitscreen unboxing and assembly. Everyone should do this!

[@chitowntexan]

Thank you for this video! I purchased the mbrush a couple of weeks ago & this video was very helpful.

[@carriebishop8568]

This is so interesting you're thinking of all kinds of different technologies to share with us

[@AuthenTech]

Thanks Carrie

[@jakewipp3257]

The quality of the print is surprisingly good. I am going to look into getting this!

[@AuthenTech]

It surprisingly is! If only the multi-line gets better that'll be the game changer

[@visualhunting5192]

Ink waterproof

[@chrisdavis3055]

Thanks for the review Ben! I just ordered an MBrush. I want to use it to print info on packages I ship for my ecommerce store, but I'm sure I'll come up with plenty of other uses.

[@evebotofficial]

A wonderful video. We are developing a new PrintPen right now. It would be smaller, lighter, and cheaper! And we will fix the wifi connection issue! Please stay with us!

[@AuthenTech]

Sounds great, thanks for the update

[@WillFyeTV]

How long until I can buy one? I really want this but reviews are bad

[@agoogleuser6937]

Please confirm as soon as you have fixed these issues. Thanks!

[@PowerScissor]

If you go to Kickstarter, everyone who backed this new model "Print Pod" is complaining that Evebot has scammed them. No response from Evebot since August and NO shipped product. Be very careful with Evebot.

[@mikechiesa]

@@PowerScissor Took months to get product (Print Pod) worked once, connect and try to print, says uploaded but doesn't print. I give up on these Dream Products. Should have known better

[@PhLo-Mix]

The original prototype of the printbrush was next level. I wish they would have made it like that. It could swipe any direction sloppily and connect all the swipes to print an entire page. All these single line devices are so "weak" feeling after seeing that original demo. But I'm not sure the creator will ever make his original vision into a product. Weird that a working prototype can't be converted into a real product in over 10 years :\ I *might* get a MBrush, but it's definitely not where I want the tech to be. I want to be able to print large graphics in my journals, not single lines. It would be a killer product to be able to print larger graphics in several swipes, connecting all the "pixels" with no overlap via censors.

[@HINDITECH007]

Nice, Interesting Product, I want to buy one

[@njdiamonds]

Thank you so much for this and I was wondering in the year that's past have you found anything better than the mbrush? I'm looking to get one of these and want to order the mbrush but before I do I want to make sure this is the best one. I plan on using it on our cardboard outer jewelry box and shopping bags and repair envelopes. Any further info would be great and if none I will go with the mbrush.

[@quentingaudard7280]

Hello Ben, does it work well on plastic/PVC ? (Mbrush)

[@brettyg76]

Whoa!!.. what a brilliant tech idea.... it's only a new idea, but give it 10 more years of development and this will be a must-have gadget for every household

[@PEKOKOTECHNOLOGY]

agee,

[@olivegod]

@@PEKOKOTECHNOLOGYagee

[@farisdewanto6281]

Did work at glass ?

[@ntnweb]

Amazing review, I'm just wondering if the Tri-color 62XL ink cartridge is permanent ink or not? Thank you!

[@xkeepersvk]

I would need something like this. But with a full pc app or pc print functionality. We need to fill information into book pages for customs inport. The book pages are numbered and certified by the customs office

[@heathergerber9699]

Can you use the MBrush and print on tissue paper, or will it bleed through?

[@hibaelchaki8574]

Reiner from Germany has printers that stick very well on glass, plastic and metals.

[@AlexLopez-pi4ef]

Not tricolor options:(

[@NicoHF]

Hi! Do you think one of those would print on rubber?

[@JolanXBL]

MBrush ships from China @ 45 days and $116 cdn, if in stock

[@MegaGreens123]

Just I want to know wheather it will print of plastic with permanently

[@Mechcondrid]

funny that the indiegogo for this printer under the name princube has still yet to deliver a single unit to any of the people that paid the just shy of $5m USD to bring this to market.....

[@MegaGreens123]

Hi I am from India , it will print on plastics?

[@DRN]

I have the same problem with the ink drying out in my princube, and it is really hard to get the ink to flow right again :-(

[@analaughlin1071]

Thanks for your review, I'll look into getting it. We are memory keepers just started selling a version called Emark Create, but the price is high, waiting on reviews.

[@MissChelle]

Did you manage to try a permanent ink cartridge yet? Thanks for an awesome review ❤️🇦🇺 new sub.

[@luciavalencia8821]

Have you tried the selpic or the princube model?trying to choose thank you

[@matnibo6033]

Jag vill köpa vad som har och var köper man den ?

[@versosabeautyvlog4501]

Very helpful, I just received the Mbrush and couldn't figure it all out but watching your video answered some of my questions. Also, there is a curing agent I saw advertised with this printer that is used to make the ink permanent on aliexpress. Are you aware of a curing agent? Does the HP 62XL permanent ink work well with this printer. I've only had mine a couple of days but can't get the printer to print properly, not even a simple test text in black. It did print on glass but wiped off because not permanent ink.

[@handyservice8930]

is increible your video but what is the app

[@TheSupertecnology]

I would think adding a stamp pad on the MBrush in the same fashion as the PrintPen, would avoid the constant dry-out. I revieved my MBrush (rather Mark Jet, same hardware different branding) today and it seems to be a common issue. According to HP's official website, the solution is to soak the cartrige in water and wipe it with a paper towel. Storage should be done in a humid, hermetic environment, such as a plastic bowl or, as the Print Pen, with a damped stamp pad. I'll try such solution and hope it works. HP's cartriges are known to have that issue, so I wouldn't put it on the MBrush, rather, the cartrige choice. Still better than the PrintPen though.

[@TheSupertecnology]

Followup: it totally works. The MBrush/Mark Jet has a gasket around the cartridge nozzles, but the volume of air it traps is too much, and water from the ink just vaporizes into it. Hence, a stamp pad cut to the size of that gasket area, about half the height of the total space, drastically reduces such volume. Dampening it with just a bit of water keeps the nozzles wet. In my tests, it lasted for over a day without use, and when printing, it came out as if I had cleaned the nozzles fresh. It is VERY important not to let the nozzles touch the pad, otherwise ink will leak into it due to capillary action, and that will become wasted ink.

[@bertyforshaw]

Any Tri Permanent Ink cartridges yet?

[@renzyndrome]

I love your thumbnail!

[@AuthenTech]

Thanks Laurence!

[@matnibo6033]

Vem säljer den?

[@lynxavr]

Did you try it on glass? How about a test tube? Would you please?

[@monfry2675]

Doesn't work on coated material, glass, plastic

[@jimhuang5182]

There is the latest generation of printing pens on my homepage, which are smaller and cheaper. Can be printed on glass and metal surfaces.

[@versosabeautyvlog4501]

I tried it on glass and it worked but it rubs right off, need permanent ink or curing agent

[@AltMarc]

REFILL ? Does it work with refilled cartridge, because of low ink error?

[@Cluless02]

Great vid - well done!

[@mjngltn]

Are MBrush and PrinCube the same?

[@siriusblack-ws7jn]

What’s the largest size prints the M brush can print?

[@johnkelly6888]

Dude where are u getting those gadgets from? I want in too.

[@AuthenTech]

Haha, lots of scrolling through the interwebs :)

[@Bobw324]

Indiegogo and Kickstarter

[@GiselleMonae]

AuthenTech - Ben Schmanke is it worth the $99.99?

[@iblackfeathers]

you might be able to put the print pen in a small faraday “cage” just to connect it, like a galvanized garbage can or aluminum foil lined cardboard box or faraday bag. not a real solution but probably better than physically moving to a more wifi-solitary location.

[@AuthenTech]

Haha, yea I'll have to experiment with that. Not ideal though, I wish it had better wifi or even bluetooth maybe

[@noahokas6520]

Are there any differences between the prin cube and the m brush??

[@pinkyhotmessx69]

Omfg u serious

[@MrHamibaloochi]

Does the ink erase in paper ?

[@jasonzoller5369]

Will the Mbrush print onto plastic?

[@AuthenTech]

Might rub off

[@nicerides2399]

Can it print White Ink onto darker surfaces like black plastic?

[@Maxdaqgroup]

Price??

[@tokonibo4936]

Det är färg printer ?

[@mdshajib1621]

Where can I find this?

[@ExpertDjs]

Have you tried the Mbrush printing on plastic or evan plastic pockets this is what i will be using it for mostly?

[@عليمحمد-ض7ظ7س]

How much the price

[@tinaqin8231]

Would you like to test WAINLUX K6 laser engraver, this is a portable engraver for wood DIY project！thanks！

[@paulmarin6380]

Can the Mbrush print on guitar picks?

[@scratchknudsen1]

Pretty awesome little devices

[@AuthenTech]

They're super awesome 👌

[@jimhuang5182]

There is the latest generation of printing pens on my homepage, which are smaller and cheaper.

[@doomo]

@@AuthenTech super awesome? You are such a shill.

[@haljabri7059]

There is program for Princube in Android store? It's work in Huawei phones?

[@brieflyflesh4917]

Haha I had a feeling you were a christ follower when you printed the fish symbol on you! God bless Great review tysm!!

[@kamilanhaimi2111]

Ur voice just awesome

[@Stealther]

I find his intonations very annoying and unnatural personally. 🤷🏻‍♂️

[@jimhuang5182]

It's so cool, But the second generation already exists.

[@FunFitandWell]

“Pinch the pen between your legs” sounds like a lot of work 😬 thank you for your patience

[@swimwithcoachraven1532]

Can it do curves

[@islamminingofcool7685]

how to the price in printpen???

[@AuthenTech]

Currently MBrush is $99, PrintPen is $249

[@islamminingofcool7685]

@@AuthenTech us dollar??????

[@djmips]

The ink won't last you a "very long time" because unless you use it continuously it will dry up... All inkjets seem to do that. I have an HP and if you leave it for a month it's no good.

[@aiwilyas15]

Permanent ink available?

[@jimhuang5182]

Almost done。There is the latest generation of printing pens on my homepage, which are smaller and cheaper. Can be printed on glass and metal surfaces.

[@salmaali2016]

Does the print disappear after U wash it?!!!!

[@jimhuang5182]

We have developed a permanent ink, which will not fade on any surface.

[@persiphoneisadude4547]

I need permanent version so I can print *_butthead_* on my brothers head

[@akansara3881]

Can I use metal print

[@jimhuang5182]

There is the latest generation of printing pens on my homepage, which are smaller and cheaper. Can be printed on glass and metal surfaces.

[@kotnapromke]

А на шерсти кошки можно напечатать как ее зовут и телефон хозяина?

[@MrsSummerSong]

Не легче ли нацепить на нее ошейник с мини табличкой?

[@annayize]

Quando lavar não sai o desenho???

[@Gloria-prayerparadise]

Just checking. ❤😊

[@arizonerufaidrufaid9800]

How to change colour green to black

[@ask_Dr_Lin]

Great!!!

[@vidkocjanc]

Very cool👍

[@jimhuang5182]

There is the latest generation of printing pens on my homepage, which are smaller and cheaper.

[@cezons8759]

That is so cool!!!

[@AuthenTech]

It's so fun!

[@SuburbanBeard]

this is amazing as a reseller i can put my logo on everything i ship out

[@MeenjetInkjetPrinter]

Pekoko Mobile Color Printer 2020 Newest DIY Gift. Delivery time in 7 days, good price reliable quality.

[@yomango35]

Its nice ..but it needs some improvement I think.

[@AuthenTech]

In what area would you like to see?

[@yomango35]

@@AuthenTech South East Asia for sure....I am open minded.

[@jimhuang5182]

There is the latest generation of printing pens on my homepage, which are smaller and cheaper. Can be printed on glass and metal surfaces.

[@mbtgamer3211]

🔥🔥

[@AuthenTech]

Lit

[@Hydraulix-em7jm]

Only ink printers that wont alert you on low ink and stop rolling when you hit low any color. Anyway i use industrial one and i bought transparent refillable cartridges.

[@VaupellGaming]

you know mbrush is a princube knockoff :D right? :D Similar to Polex is a cheap Rolex knockoff.

[@ritawong2994]

How come when I connect my printer to the laptop via USB, nothing happens.

[@rhonar7090]

I found you have to press the print button on top and then your laptop will find the MBrush. Also note, you have to have the MBrush connected via USB or WIFI or the app does not load through their website.

[@eddyflo2978]

08.58 ... that's what she says after round one

[@sherryperkins531]

I just received my MBrush which won’t print. How do I get it to print.

[@doomo]

You wont. It is just as bad as the Eve product. Total crapo.

[@IraQNid]

Tri color inks are wasteful. When you run out of just 1 color you have to throw out the other remaining colors. You also don't get true black. Composite black is created by blending all 3 colors (CMY) to almost create a dark brown.

[@anshulbindal2006]

Hi sir....i bought princube...but still not getting any shipping info....anyway to contact these guys....email also not answered by them....any other way

[@rollupbreezymac2406]

Anshul Agarwal I had to contact PayPal and request a refund after that they sent it I finally g ok t a tracking number

[@jimhuang5182]

There is the latest generation of printing pens on my homepage, which are smaller and cheaper. Can be printed on glass and metal surfaces.

[@DJJAW11]

... I would wont one, that can print on abs black plastic, and have some ability to not be done in via Uv!.

[@MrThe1234guy]

Can't wait until they are giving these away like normal under printers.

[@navkarzerox329]

I WANT TO BY M BRUSH WHERE TO BY

[@raspberrypiploy771]

you guys you guys guys all in monotone great !

[@kaviarkicks840]

The repetitive end of sentence inflections are dreadful boss...

[@jmez927]

Nahh....not ready yet

[@videos40058]

hei i can help you with that. Next time you experiencing interference issues. Put your devices in the microwave oven But not turn them on!. When the door is shut there are no electromagnetic waves in your oven, because its a faraday cage.

[@sakshamjain9244]

Shoutout

[@thehatman3089]

Will washing your clothes take out the ink.

[@PEKOKOTECHNOLOGY]

yes,it will be washed away by simple water

[@MrGTAmodsgerman]

Did you tried to get cancer by printing on your skin so many times?

[@kubectlgetpo]

Yeah, proprietary cartridges is LAME

[@sakshamjain9244]

2nd

[@nicklockard]

This printer uses your wifi-direct connection and an awful web page. It's beyond useless. When you're connected to it via wifi, you can not access the internet! How stupid. Do not waste your money on this garbage. Shame on you AuthenTech for pushing this garbage.

[@porvoonosho]

Great for public toilets.

[@jimhuang5182]

There is the latest generation of printing pens on my homepage, which are smaller and cheaper. Can be printed on glass and metal surfaces.

[@esbalon7779]

1st

[@AuthenTech]

Fast!

[@pinoyabroadloan]

Not long lasting easy faded ink

[@remiremillard8419]

sounds like the print pen sucks!