Beretta 92FS Brigadier Inox Review

[@coll3595]

They still make them just made my 1st gun purchase was calling everywhere for that exact 1 and luckily enough I found it and purchased it love it such a beautiful and nice shooting pistol

[@Slavinatorski]

They really are awesome pistols. Amazing finish and super accurate. Congrats on your first purchase, your first one is one of the best!

[@vernievuitton]

Also I got a complete nickel 92fs parts kit to swap onto my inox brigadier and It look so nice!

[@gdonnally1]

Your reset test was incorrect. Your reset was full trigger travel. Had you cocked it, pulled the trigger, then racked the slide, "as like normal operation" the reset is quite good.

[@Slavinatorski]

Yeah I realized that far too late after recording the video. Luckily I've made it a point since then to take my time on the records to be sure I do everything correctly and don't miss anything. It's a sweet pistol!!!

[@TheRealChrisShades]

Shot one yesterday, I can see why everyone likes it so much. Deadly accurate! 💀 👍🏽

[@ricohorton]

I would like an Inox Brigadier.

[@Slavinatorski]

They are great pistols!!

[@jaex26]

I just picked up a new 92fs Brigadier and the entire rounds failed to feed on my factory magazine. I've tried 4 different ammo and all same result. I was left speechless knowing the reputation that Beretta have. I called Beretta and they're sending me a new spring and magazine but it left a terrible taste in my mouth as my first ever Beretta. Once the parts arrive I really hope this solves the issues.

[@nonyabiz9487]

I had an old worn out looser than a old 5 dollar hooker M9 Beretta in the military... I loved the thing! One of the most accurate pistols I ever shot in 9mm.

[@Slavinatorski]

Lmao!!! They are amazing pistols! I will always have, at the very least, one in the collection.

[@bmwrider-nl8in]

Love those grips I have never shot one but they look sweet ,

[@anthonylinzalone3935]

Outstanding Firearm

[@jesse8721]

“Nice … I like … “ (as Borat would say). It almost looks 2 tone in some angles - not sure if it’s the lighting or what, but frame looks slightly gray from the slide ?? Do you notice that? Did you make the video of all “SS” yet ??

[@ryanbaggott4940]

I have one. Couldn't ask for better quality or smoother operation. Only downside is it takes a pretty big hand to grip it and squeeze the trigger with "correct" form. And not aware of any after-market grips or mods to really fix that issue.

[@Slavinatorski]

I love mine, its a great pistol and very comfortable to shoot. You aren't joking that the grip is huge, it feels comfortable for me but I also use an XL glove size lol

[@louie111887]

Buying this next Feb ! Can't wait!

[@Slavinatorski]

You will be incredibly happy with it, such a great pistol!

[@louie111887]

@@Slavinatorski already looking at grips haha

[@Slavinatorski]

@@louie111887 Nice!! Haha there are so many good options for grips its hard to choose.

[@anthonylinzalone3935]

Number one safe Queen

[@mariorazo6186]

Beautiful pistol. I owned CZ and Glock and I’m looking to get myself that beretta.

[@Slavinatorski]

Thank you, I highly suggest it. Its an awesome pistol!

[@dg8676]

I pick mine up Thursday

[@dg8676]

They still make them just made in USA 😩 I pick mine up thursdsy

[@nicholascohen852]

Hi from Australia, I have just ordered my Blue Brigadier as a supplement to my CZ Shadow 2 which is great, but very heavy. One thing I really don't like about the Beretta is loading the mags by hand. After one 6 round shoot my fingers were buggered and bleeding. It was a real struggle. Nothing like the CZ. Thanks for the review. Did your gun have an aftermarket steel guide rod and spring? Is one required?

[@zenonayala9557]

I noticed that the serial number on the slide and frame are different. Can you explain the compatibility of frame and barrel. Theses days one can buy a frame and later when their finances improve, that person’s can buy what they are missing

[@cam-inf-4w5]

Do you have the stainless parts yet? Im thinking about doing exactly this id like to see the vid

[@djames6043]

Can you change the grips on the brigadier? I want to buy a Beretta 92 or M9 and customize it to look like the samurai edge from Resident Evil

[@Slavinatorski]

For sure, I've seen some really nice red wood grips online that will look great on it. I was thinking of going the samurai edge as well, those were cool looking guns in those games.

[@djames6043]

@@Slavinatorski you should do it. I'm gonna do Weskers gun so its the inox beretta with a black slide. And if you're looking to buy the grips check out dsgrips.com they make legit samurai edge grips with the medallions and everything.

[@Slavinatorski]

@@djames6043 I think you just sold me on those, they look great on that site. Some cool Star Wars ones too. Wesker's was my favorite too. Those games are part of the reason I always wanted a Desert Eagle too lol

[@djames6043]

@@Slavinatorski lol ayy I've never bought a gun before but put my name down as a reference and tell someone to send me some cool shit. I'm doing the Samurai Edge and in the future I'd love to do the Lightning Hawk or one of the magnums in general from RE, they always have awesome guns.

[@djames6043]

I also want to try and do the Sentinel Nine Leons gun from the latest animated movie Resident Evil Vendetta it's basically a two tone Sig P226 with a muzzle break and extended clip, it looks pretty sick but its also a bit pricey

[@kevingriffin8854]

Is it normal texturing under the finger grooves? I want this pistol, w/ different grips

[@Slavinatorski]

It is, the grips just cover them up is all. A nice set of pearl, redwood, or silver grips would look great on it!

[@Whatisthis94]

Spectacular vid - thanks. Have you made all the mods? Because of your vid - got the 92FS Brig Inox as well!

[@Slavinatorski]

Thank you very much!! I haven't picked up all the stainless controls just yet. I have them all in my shopping cart waiting haha. They are great firearms and I love this model!

[@Whatisthis94]

Thx and please post when you get. I’ve also seen some grips from hogue and beretta which are aluminum but hard to tell which ones look best and match the color of the Brig Inox

[@Slavinatorski]

@@Whatisthis94 For sure, I've had my eyes on those aluminum grips as well. I think they will look great!

[@AlwaysProblematic]

How hard is it to find a Made in Italy version? I am eyeing this exact one but I wish it had a rail. Seems like I would have to find a used Vertec if I wanted a rail (for California compliant)

[@Slavinatorski]

It wasn't to hard a couple years ago but they are becoming more difficult to find. I would try your local gun forums online. That seems to be the best bet. The rail is the only thing missing from it but I do dig the classic look with out the rail too.

[@vernievuitton]

Is it just a standrad 92fs frame on the brigadier?? Im curious because I had the opportunity to buy a m9a3 slide the other day for my Brigadier frame and I was unsure.. thanks!

[@zenonayala9557]

I have acquired a 92 brigadier fs upper,slide and barrel. What frame do you suggest I also acquire. I have been looking for an appropriate replacement frame but I have no success. Even if I can an equivalent frame that will be helpful.

[@Whatisthis94]

Was looking at the Beretta 1301 Marine Tactical shotgun. Think it’s possible to convert into “ghost”?

[@Slavinatorski]

The shotgun I'm not sure, I'm going to have to take a look at it now lol. As far as the brigadier it definitely can. I have all the parts in my shopping cart on a couple sites waiting on a sale.

[@jalee6587]

Why would you care about the reset on double action. Once you shoot it will then be all single action therefore all single action resets.

[@Slavinatorski]

A good point, but if you get an FTF it never hurts to know what kind of reset you're dealing with to get the second strike on that primer.

[@averageguy2525]

Looks to need some lube on the slide contact rails.

[@YTvideow]

The black parts in this plastic or metal

[@BodhiSurfer1991]

what sights did you get?

[@johnmazzoni487]

Are the levers plastic or polymer coated metal?

[@Vinhnguyen-mv6py]

Why does mine come in a black box no cleaning kit?

[@theinfidel6301]

Where can you find stainless steel sights?

[@theinfidel6301]

What brand is your threaded barrel?

[@D1RealChannel]

Hammer bite?

[@SolomonSamson747]

You want to sell your OEM inox barrel by chance? Building a Samurai Edge.

[@w.rustylane5650]

If I had the $$, I'd take that black barrel off yer hands.

[@SolomonSamson747]

Blood Dragon!