Absolutely an excellent pistol, VERY reliable, honestly better then my G17. Scary accurate as well. Fun thing too, when the slide is locked back from running out of ammo, when you slam in a new magazine the slide automatically returns placing a fresh round into the tube. Have had mine for about 2 years, daily carry 100%. Got mine new from a dealer, yeah it was close to $500. And still worth every dollar.
@theoriginalOSOK23 күн бұрын
Came back to watch again. Pushing the takedown lever too much prevents the slide from releasing - something I've figured out. So you push in just enough to allow the lever to drop - too much and it locks up. Good thorough review. Thanks!
@BrowncoatNerd23 күн бұрын
@@theoriginalOSOK thank you!
@loadingwifi2943 ай бұрын
I got an aim surplus APX as well, and I love it. Mine also has those black marks on the sights.
@BrowncoatNerd3 ай бұрын
I’ve been very happy with mine. But I do need to do something about those sights.
@loadingwifi2943 ай бұрын
@@BrowncoatNerd A different firearm of mine had a similar issue. Actually the whole white insert in the sight fell out so it was even more extreme. I took some white citadel paint that I use to paint warhammer figures and put one dab on with a tiny brush and it fixed the issue. I don’t mind the black dots so I’m leaving my APX but if I was to remove them without getting new sights that’s what I’d do.
@theoriginalOSOK3 ай бұрын
The four digit marking does in fact denote the manuf date. And the mark under the ejection port is a LE marking. I just got one of these about 3 weeks ago. I like it.
@MidwestPicker3 күн бұрын
Did I miss why Brazil changed their minds on these?
@BrowncoatNerd2 күн бұрын
@@MidwestPicker I don’t know if these are over runs or if Brazil just decided they didn’t need the rest of the order.
@mausercal654 ай бұрын
Just got one of these and I’m very impressed with it .
@BrowncoatNerd4 ай бұрын
After getting it in my hands I was very happy with my purchase. And just the other day a finally got some range time. 100 rounds went by very fast and zero regrets!
@jacobmoore43802 ай бұрын
Thank you for this review and information. I purchased one from AIM Surplus and am very pleased with it. The information that you provided in your video was spectacular and really interesting and informative. I would like to respond to your comments on the white dot rear sights. Just to let you know, I can see indents in the center of the white dots but they remained intact unlike yours which had a black hole in the center. Mine are solid but I do like the way that yours turned out. Thanks again for your very informative review.
@BrowncoatNerd2 ай бұрын
@@jacobmoore4380 thank you very much!
@harpsitardo2 ай бұрын
Wow - what a great and informative video! It's rare to see someone give an accurate appraisal of an APX online. I believe it was the plethora of ignorant American Guntubers who - not understanding (or caring) that it was designed to be a pure LE/Military combat pistol - incessantly whined that the trigger wasn't a CZ Shadow trigger, the takedown was too difficult (they didn't bother reading the manual), it didn't have a red dot, etc etc that caused Beretta to dumb it down with the A1. Just as an aside concerning the rear sights: I'm viewing this on a phone so I can't see details, but they have the same appearance that the 1st gen Tritium sights from Beretta have, which gives the appearance of a black dot in the middle of a white circle in daylight (not the same style as the A1 tritium fronts, which has no white outline from what I've been told?). They were made by Ameriglo. Do the rear sights have any branding on them from Ameriglo? Or is it just a painted black dot on them? Anyways, great video - good job on showing how easy it is to take down an APX. I've noticed a few videos online where they have difficulty, but the recoil spring looks all gnarly and messed up - which might be what's giving them issues.
@BrowncoatNerdАй бұрын
@@harpsitardo thank you! Unfortunately the sights aren’t Ameriglo sights. It’s almost as if the white paint caved in in the center. Most from this batch do not have this issue but a few others have reported this same problem. Not a huge deal to me as I plan on changing them to night sights.
@nicklausmisiti520412 күн бұрын
Why did brazil buy these and get rid of them, likely for pennies on the dollar, almost right away?
@BrowncoatNerd8 күн бұрын
@@nicklausmisiti5204 these may be over runs from Beretta. But I’m not positive on that. One thing I find interesting is they were imported into the US by Beretta USA. So it’s not like Brazil just sold them off to a random US importer. Also maybe Brazil realized they didn’t need as many as they ordered so returned some of these back to Beretta? Ether way it’s a good question and I’d like to find out why.
@jasonsosa11333 ай бұрын
I have bought one great price for a firearm very simple for anyone looking for a gun
@matthewcarlson55053 ай бұрын
On the right side of the apx underneath the ejection port, it also can say "ascensus". Minus the quotation marks of course.
@UrbicideАй бұрын
Mine also has that marking. The serial # of mine is over 12,000 lower than the one in the video. I haven't been able to separate the slide from the frame, & the trigger pull leaves a lot to be desired. I'd be happy with an 8 pound trigger.
@UrbicideАй бұрын
I found that I was pushing in too far on the slide take down lever. Push it in all of the way, the lever will still pivot, but the slide isn't going to release. The recoil spring is the flat wire type, & the striker spring in mine is the super stiff original with the black plastic guide rod.
@Bob-gl6cg17 күн бұрын
OK I looked again, mine says ascensus my bad, still do not know what it stands for.
@wesleysmith11412 ай бұрын
Good video. Love my APX A1.
@BrowncoatNerd2 ай бұрын
@@wesleysmith1141 thank you! I think I’ll probably end up getting an A1 as well.
@magdump73803 ай бұрын
On the A1 the loaded chamber indicator is on the extractor.
@mattr918Ай бұрын
The bad things is after rebate I can get the a1 cheaper. Aim is a bit high on surplus. Surplus used to be way cheaper
@BrowncoatNerdАй бұрын
@@mattr918 who’s selling an A1 for less than 300 (after rebate)?
@UrbicideАй бұрын
Isn't Bidenomics great?
@mattr918Ай бұрын
@Urbicide surplus was over priced before biden... not every thing has to be political.
@budgetguncinema77772 ай бұрын
Unissued but someone played with it long enoigh to put a scratch on the slide. Left side below the Beretta logo.
@BrowncoatNerd2 ай бұрын
@@budgetguncinema7777 that’s just an oil smear. If you go to the beginning of the video it’s not there.
@budgetguncinema77772 ай бұрын
@@BrowncoatNerd oh, nice! I have been contemplating buying one of these. I'm kind of an M&P fanboy though so I'm going back and forth between these APX's and the LEO M&P trade ins. I bought one of the M&P 45's last year and found it to be a great value but the APX is a spanking new gun for $20 more???🤔 decisions decisions.😅
@BrowncoatNerd2 ай бұрын
@@budgetguncinema7777 that’s funny because I’ve been looking at the LEO M&Ps. Trying to decide between the gen 1 9mm or gen 2 40 S&W.
@Bob-gl6cg29 күн бұрын
does anyone know what the markings under the ejection port stand for. He has AS/BR I have "concensus" on mine.
@BrowncoatNerd29 күн бұрын
@@Bob-gl6cg very interesting! Is yours one of the Brazilian contracts from AIM?
@Bob-gl6cg29 күн бұрын
@@BrowncoatNerd yes just got it
@BrowncoatNerd29 күн бұрын
@@Bob-gl6cg I’ve seen two other videos on these and they both had the same mark as mine. Perhaps yours was made for a different Brazilian police department than mine.
@Bob-gl6cg29 күн бұрын
@@BrowncoatNerd I googled the word consensus and it translates to ascend, to go up. I wonder how that fits into the Brazilian Police?
@BrowncoatNerd29 күн бұрын
@@Bob-gl6cg interesting. The mystery continues.
@Pavia15254 ай бұрын
They’re almost free… lol.
@BrowncoatNerd4 ай бұрын
300 for a full size new in box Beretta, you really can’t go wrong!
@PaulKersey5.563 ай бұрын
I will NEVER order anything from AIm again. They burned me on a 1201 a few ago!
@BrowncoatNerd3 ай бұрын
@@PaulKersey5.56 that sucks. What was wrong with it?
@bwat052 ай бұрын
Have you contacted them, I am sure they will make it right.
@BrowncoatNerd2 ай бұрын
@@bwat05 I just would like to know what happened.
@bwat052 ай бұрын
@@BrowncoatNerd they are good dudes in there, I hope they can help. They are local for me and have always been accommodating, so I doubt they intentionally wronged you.
@BrowncoatNerd2 ай бұрын
I’ve had nothing but good experiences with them. Unless you’re referring to the rear sights on my APX. That doesn’t matter to me because I was planning on changing those out anyways.