Holzkajak selber bauen - Das Yura Kajak als Bootsbausatz in Stitch & Glue Bauweise

[@termite7790]

I've watched a pretty good amount of kayak builds I think this guy is the best. the way he puts extra strength where it needs it. pretty cool. thanks.

[@ogival9738]

Eine wahre Wohltat hier zuzusehen. Ein exelentes Anschaungsvideo und hier kann der/ die Kunde/in sehen, welch hochwertiges Produkt bei Ihnen entsteht. Danke für den Einblick. 👍

[@christiansteininger4066]

Tolle Arbeit👍Hab vor 2 Jahren einen Ripovesi Kanadier Bausatz von euch gekauft und zusammengebaut. War eine tolle Erfahrung wie aus ein paar Planken ein so schönes Boot entsteht. Wenn ich an den heimischen Seen paddeln werde ich immer wieder angesprochen was ich für ein schönes Boot besitze. 😀 Liebe Grüße aus Österreich...

[@alvaroolea9857]

Awesome, nice job! I would like subtitles in English, so that many more people could understand them. Thanks for your video.

[@schaari99]

Klasse Video. Für das Verrödeln der Drähte gibt es extra Rödelzangen, die in der Floristik, auf dem Bau (Bau-Stahlkörbe flechten), und im Flugzeugbau (Schraubensicherung gegen verdrehen) angewendet werden - könnte hier Erleichterung gegenüber der "Kombizange" bringen.

[@ilan690]

Excellent work! Thanks for sharing! I wish it had English subtitles.

[@PetraBorina]

was für ein tolles Video und ein wirklich schöne Webseite!

[@SuperBardley]

WOW! The attention to detail is excellent and yields great results and saves work down the road.

[@guntherpommer6433]

Sehr schön. Danke fürs Zeigen....Grüße aus Chile

[@nickgeorgie1957]

Structurally speaking, the fiberglass cloth stripes applied at the joints from the inside, are not as important as placing them in the outside of the kayak. Said this, it would have been way better to apply them in the outside as well. Thank you for the video. Great workmanship.

[@martindornhofer1591]

Schönes, anschauliches Video….. meine Frau wünscht sich so ein Kajak und ich habe die Absicht, ihr eines zu bauen….zwischendurch kommen mir aber Zweifel, ob ic das so hinbringe, wie euer Protagonist…😬😄

[@eugeniosolari]

yes, great job, not missing a single detail...

[@UlrikeFranziska]

Perfekt! Da schlagen Bootsbauer-Herzen höher.

[@WoodBrothersNDS]

Veramente un video completo, hai fatto un ottimo lavoro. progetto bellissimo. complimenti

[@scratchcardshadreck3631]

Thank you for sharing this video. Excellent craftsmanship.

[@traktorworks3200]

astonishing workmanship and ability. go and have a beer. you deserve it.

[@larsluder9783]

sehr schön hab schon darauf gespannt gewartet, jetzt werden es zwei boote

[@russellesimonetta3835]

Very nice. Gap filling super glue to weld parts as you go.

[@ПавелПавел-л1м]

Schöne Arbeit, Kajaks sind einfach super. Sagen Sie mir nicht, wo Sie die Zeichnungen bekommen können? Um das gleiche zu tun. Vielen Dank für das schöne Video.

[@khelben1979]

I'm very skeptical about the strength of this kayak when it comes to impacts, but it seems pretty light weight, and I would think that's where it shines!

[@bernhardtammen4463]

Dankeschön fürs Zeigen Grüße aus den Saterland

[@marcionekaite5113]

Sou muito seu fan .seu trabalho top das galáxias. Abc do marcione kaite

[@tomthompson7400]

very fine boat , but how on earth do you work on something thats always moving , think id have a solid stand , but the results are great.

[@sanifmalik5389]

nice work and loving music background

[@كريمكريم-ت8ش4غ]

كنت رائع ولقد ابدعت

[@protonyneutrony5738]

Schöne Arbeit!

[@Fabio66nelblu]

Bellissimo lavoro e bel kayak!!

[@renatorojassandoval]

Una joya...Hermoso...

[@janiopimenta3207]

Hi I like to buy a pdf for this Kayak?

[@klausstoll9431]

....... wunderbar......

[@geraldhaller9906]

Wo kann Ich so ein Boot selber Bauen ? Ich habe keine Werkstatt oder Garage für so ein Boot und Werkzeug ist auch nur teilweise vorhanden und das in Kleinformat weil Modellbauer , habe aber Erfahrung mit Bootbau da ich schon etliche Holzboote gebaut habe allerdings im Masstab 1:6 - 1:12 also zwischen 0,5 m und etwas über einem meter groß . Da ich schon immer ein Kayak haben wollte aber kein schönes finden konnte ausser die Selbstbausätze denke ich das sollte das richtige Boot für mich sein und auch handwerklich machbar

[@bergerboote]

In unseren Workshops kann dieses und andere Boote unter Anleitung in unserer Werkstatt bauen: www.bergerboote.de/bootsbau-workshop

[@deanmacka4975]

Great stuff mate 👍👏

[@fundacionalanis5536]

Es un trabajo fantàstico. Lo pueden traducir al español. Saludos

[@haguigazouhir2920]

I admire your beautiful and elaborate science and i would like to build such a boat if it is possible sir to obtain the scheme for this boat this will help and motivate me to embark on this achievement ,please accept my greetings and the highest appreciation and respect

[@Freeride304]

Великолепно !!!! )

[@jonasdiniz4182]

Parabéns! belo trabalho...

[@vovapukin2621]

sehr schön!!!

[@stegle5607]

Lindo seu trabalho, parabéns, bonita trilha sonora. De qual país??

[@carstenkrone9525]

Wieviele Stunden muss man denn für so ein Boot kalkulieren? Und wieviele von den Leimklammern sollte man sich vorher zulegen? Irgendwann im näöchsten Jahr will ich auch so ein Boot bauen, bieten Sie nach wie vor Grundkurse an (1-Tages-Kurse?)?

[@bergerboote]

60-70 Stunden dürften realistisch sein. Klemmzwingen kann man nie genug haben - aber 15 St. sollten reichen, dazu ein paar Schraubzwingen. 1-Tages-Kurse bieten wir nicht an, aber es gibt einen Einführungskurs (1,5 h).

[@carstenkrone9525]

@@bergerboote vielen Dank für die Auskunft, dann werden wir uns bestimmt bald mal melden.

[@Bugdriver49]

Yep, it would be wonderful to know what was going on in this video....especially since I'm interested in a kit...

[@paulbergman8228]

Cheasapeake Light Craft has a video which follows the same process; they also have a variety of great kits, some simpler that others to build. Nick Schade has a You Tube series (under his name) building several custom kayaks which has great techniques to follow which I feel are the very best in quality for custom strip builds, and some of those very fine skills give added quality to kit builds. His website is GuillemotKayaks.com. This craftsman’s skills are also of a very high order following these details gives very good results. Working with epoxy takes patience and practice to give good results. One of the golden rules for epoxy, fiberglass and wood is...never epoxy anything when the temperature is rising as outgasing of the wood will leave air bubbles in fiberglass weave or in the clear coat over bare wood. After sanding always wash the epoxy with warm soapy water, rinse and dry with alcohol and paper towels. Frost time users should do some trial laminations on scrap wood or plywood to see how things work and how much epoxy is needed to just wet the weave, and not overdo it on the first coat and ‘float’ the fiberglass, squeegee off the excess for a very light coats; the same with second or third coats before sanding. Practice sanding on those practice scraps of wood or plywood to see how it works, then go to the kayak. Just a few lessons to help along with the examples on various build channels here. 🛶😎

[@Bugdriver49]

@@paulbergman8228 Thank you for the info....

[@pyroislove7823]

Sehr schön lg (:

[@parks2789]

😍😍👍👍👍

[@delsonmoraes3895]

Essa manta de fibra é 250?

[@womplestilskin]

It would be kind of you to do an English subbed version.

[@AlexandreBrasilis]

Onde posso comprar esse kit? Sou do Brasil. Desde já agradeço a atenção.

[@piratasdocaiaque.1910]

Perfect..

[@langlangbuana8103]

Halo saya dari Indonesia. Saya ingin bertanya bagaimana cara mengukur lebar triplek nya untuk alas???

[@maurofiscalini2257]

Awesome...👍☺

[@gregoryh4601]

Hello Sir: thanks for this video an I will watch more of them. Had you thought of making the super awesome Kayaks in a kit form to be able to send to people that would build these? Like me in the USA? I would love a 10’ or 12’ to build and the wood you use is very beautiful looking. Could you use Kevlar fiber for the bottom? Have you try Peel Ply over the fiberglass o keep the sanding down? I hope you like my ideal because you be so bussing.lol God Bless and Peace be with You. Greg from USA. PS. Could you please make your website in English for some of us. Thanks

[@varun009]

Chesapeake along with many other companies in America make kits ready to go. They're pricey though, I'd just buy the plans and cut my own plywood I already have.

[@xayitalinorquchqarov9536]

Кулиг гул гап йук ок

[@sjvche7675]

Like the drill press mixer

[@delsonmoraes3895]

Muito bom trabalho

[@SuperBardley]

What is the finished weight of the kayak?

[@bergerboote]

Without deckglass it's 15.6 kg - with deckglass a bit more.

[@joshlower1]

I want pounds dammit

[@blackz9058]

@@joshlower1 The metric system rulez!!!

[@delsonmoraes3895]

Alquem sabe o site para comprar esses projetos?

[@delsonmoraes3895]

Qual site posso comprar o projeto

[@LqR_AfK_Player]

do you share de cnc plans?

[@bergerboote]

Sorry, we don't.

[@piratasdocaiaque.1910]

Show

[@magnumoliveiravieira4077]

Olá amigo, trabalho top! Procuro projeto para fazer um para mim

[@rogeriocarvalhodossantos3525]

Veja aqui cnckayaks.com/

[@delsonmoraes3895]

Quais matériais usado?

[@trygvethomassen6393]

i like one olso ,hove much for one for me??

[@engr.shamimsarkar1543]

Amar akta petan lagbe kibabe nebo

[@maxfazza]

nice!!)

[@石川英世-j5r]

とても美しく見とれています。

[@Julianna1220]

nice, )

[@АлександрВаулин-ь5к]

OK. :-)

[@jonessantos6776]

Bom

[@biggbobish]

flush trim router

[@stefantwotimes]

To bad,,, no english so everybody all understand this,,,, :-)

[@oruam474]

alles toll, aber die Musik ist schlimm.. einfach die Geräusche laufen lassen, macht das Video um Welten besser ;)

[@MsEliasc]

Holz und doch Plastik! ,- bau doch mal ein Holzkajak komplett ohne Chemie.

[@raymondo162]

jolly well said, old chap

[@raymondo162]

don't seem to be massively watertight where the deck joins the hull, on the inside. that's where the rot will set in...………

[@axcs0119]

From the looks the deck is resin coated on the under side and the top fiber glass does wrap onto the hull. So there should not be any water intrusion. He also does fill any defects with epoxy prior to glassing the deck to hull joint.

[@joshlower1]

I pretty sure he knows how to build a kayak much better than you Raymond pos