Best $145 RC car on the planet? MJX Hyper Go 14301 vs 14302 vs H14MK

[@-xirx-]

Ive just bought one of these as my first rc car. Ive watched a ton of reviews, unboxings, bashings etc and i just wanted to say yours was the most helpful, most comprehensive, most detailed, most considered, most honest and most excellent advice one i have seen on this car. So thank you very much, its an instant subscribe from me. Will you be doing the rlaarlo omni terminator carbon fiber please? I've just got one on presale and would be most eager to hear your advoce and thorough breakdown/review. Cheers, a complete newbie ✌️🙂👍

[@hyperc5249]

Thank you very much. That is the reason I started doing this in the first place. I'm on the fence with the rlaarlo. But you just might have convinced me to do it. Cheers bro!

[@unloveableandre]

12:40 The rally part was sick, I just wish you had a longer footage and a higher mounted camera.

[@hyperc5249]

Same I bought a different tripod after this video. The Rally car is a blast.

[@gillian9178]

Absolutely love these MJX cars, I have been running both the 14301 & 14302. You wont find better cars than these for so little money & so much fun. Beside 43mph stock out the box for a 1/14 car on 3s isnt to shabby at all, they are also pretty stable at those speeds as well. Unlike a lot of other cheaper brand 1/14 cars that would be all over the place at those speeds, I think the MJX cars are the best budget cars on the market right now. I also have the MJX 1/16 Hyper Go MT with the clipless body which is a total blast to drive, factor in the toughness of this brand as well.

[@hyperc5249]

Well said.I couldn't agree with you more. I'm definitely a big MJX fan now. The electronics, chassis, and suspension are all high quality. All that for only $150ish, nothing else is even close. Wait until you see what is in my next video. Thanks for watching. Bash,Crawl, Repeat!

[@lyricofwise6894]

​@@hyperc5249 Does the any of the transmitters have the dead zone (where the rc doesnt go forward) in the initial throttle press of the trigger? It was that way in the first mjx rc car, and wondering how to avoid it.

[@hyperc5249]

@myrnav2837 A small amount. You can always switch to a better transmitter and receiver.

[@t3floz]

Are they waterproof?

[@hyperc5249]

@eric04110411 yes

[@kenselleck2414]

The 1/12 vintage bodies from Team Blue Groove fit nicely. I bought the Street Beetle and with minor trimming it fits great! I ordered another Street Beetle and also a Green Wood Corvette body. The ProLine VTA wheels fit well as well as their aluminum slot wheels. I ordered Tamiya 50683 tires for the slots for the vette.

[@hyperc5249]

Awesome. Thanks for sharing that info.

[@kenselleck2414]

Anytime! The MJX HAS A 190mm wheelbase and is 165mm wide @ the tires for the guys that haven't gotten the car yet. Team Blue Groove puts that info with most of their bodies on the website.

[@sashair]

I accidentally saw one of these models and now I’m thinking of ordering one for myself, a very interesting and fast model

[@SeekingTheVerdants]

I totally agree with your point. MJX should not have used phillips head screws on the bottom of the chsssis. I dont understand why some RC manufacturers continue doing that.

[@hashimrahman51]

It’s easier to machine an “x” than a hexagon. Probably also let’s them get away with using softer metal too. Saves them 1/1000 of a penny on every sale. 😂😂😂

[@Boogie_the_cat]

Because MJX designed their cars for a certain budget, and started with 16th scale trucks at $99 so they had to cut every corner, and they bought one million Philips head screws in bulk so they're not gonna change to hex screws until they use up their whole supply of Philips screws. People always get this super puzzled question like yours, and the answer is obvious: they're selling the cheapest hobby grade RCs and they have to cut every corner possible, especially since their first trucks were SO budget, they cut the corner with Philips instead of hex, and they buy in bulk to save the most $. So it comes off as really stupid when people like you ask that question about Philips screws. It's not like they can justify paying more for hexes, when they can't advertise it on the effing box. Nobody's gonna put a bullet point on the product description that says: "now with hex screws" Baby's first RC buyer isn't gonna jizz their pants over hex screws.

[@Top-Jimmy]

Just found your channel mate..Awesome presentation, Thorough, Accurate and no pissin around. Thanks man, I'd love one of these in a WRX Subaru body.. Maybe something will fit one. Cheers from Australia. *Subbed* 👍

[@hyperc5249]

Thanks, mate. I want to see a WRX body from MJX. These rides are awesome. I have more content coming soon. Bash, Crawl, Repeat!

[@Top-Jimmy]

@@hyperc5249 Yeah man, A WRX body on one of these or an EVO could set MJX right up for their future releases...Even Talbot would have a hard time breaking one hahahh. Great channel mate, will be sure to let our RC club know about it down here. I'll get around to watching all your content... Keep up the great work, Its a lot better than most the content out there. You're onto it bro! Take care eh!

[@coltenlooney5811]

Looking forward to the 14301! Ordering soon, seems like all of these are very customizable? So they are hobby grade to be a good beginner rc to get to customize?

[@167switchback]

I order one yesterday cant wait to try it.....all review and video are positive so can't go wrong 😊😊😊

[@hyperc5249]

MJX is an awesome RC company. Best 14th scale RCs on the Market IMO.

[@167switchback]

I cant wait to get it!

[@benstotil9677]

​@@167switchbackand ?? Do you like it ?? Do you got 14301 or 14302 ?

[@167switchback]

14301

[@chuckwalters4759]

I have 3 and waiting for my 4th to come! These things are INSANE on 3s! They are now an addiction!

[@hyperc5249]

LOL, I just got my 5th. These are some of the best RCs on the market. MJX has outdone themselves. I have a new video on another new release from MJX coming soon.

[@chuckwalters4759]

@@hyperc5249 AWESOME I will watch for sure!

[@mikestrong3910]

Hi any chance you can tell me what 3s batteries I can buy for the 14302 please?

[@chuckwalters4759]

@mikestrong3910 I like using their pripitary 3S They lock right in with no issues

[@hyperc5249]

@@mikestrong3910 Here is what I run. OVONIC 3s Lipo Battery 35C... www.amazon.com/dp/B08R6V9FGW?ref=ppx_pop_mob_ap_share

[@THEDENDIECASTRACING]

I purchased the lancia. I don’t know anything about RC cars. I want to film them. I want to go with the stock battery. However, I want a very good remote and a mounting cam.

[@hyperc5249]

@@THEDENDIECASTRACING Flysky makes a lot of good remotes.

[@felipezafani]

Great video, I am into this hyper gos for sure. They are amazing, I just subscribed great job on this video. I will look for more of your videos soon. I have my own channel as a hobby only but I am having a lot of fun.

[@hyperc5249]

Cool, what is your Channel name?

[@felipezafani]

@@hyperc5249 Felipe zafani is the channel name and also my name, I have done all things in the past, lately I have focused on RCs which I always loved since years ago! Let me know if you can find! Thank you love your videos

[@unloveableandre]

The 14302 has the nice transparent windows shell

[@fishycomics]

thank you: finally a review that is top notch, and i may opt for one. any word if they are waterproof on the electronics I may lean the Black momba you mention, best bang for the Buck. great job

[@hyperc5249]

Thanks. I can't find where MJX states they are waterproof. Water resistant, yes. Black Mamba is definitely my favorite street basher.

[@fishycomics]

thank you,@@hyperc5249 researching will defiantly put on Santas wish list

[@tripyramidpictures9224]

I WAS SO HOPING TO SEE THE WHITE CAR!

[@hyperc5249]

Other than the body, it is exactly the same under the hood as the 14301. It is an awesome flat dirt rally car.

[@soaringkhaled]

Hi, at10:26 .... the brakes is awesome... but I wonder if this sudden stop of the motor could damage the gearbox ?? from helicopter experience we used to program soft start to avoid damaging the gears from abrupt motor start... so I think same thing applies to the gearbox of the car .... I want to enable brakes in some of my cars, but I'm afraid to ruin the gears ... so I thought I should ask you about this .... Thank you

[@hyperc5249]

This is not an issue in cars. You will flat spot a tire before breaking gears.

[@soaringkhaled]

@@hyperc5249 You mean the metal gears can handle abrupt stop just fine unlike helicopter plastic gears ??

[@hyperc5249]

@@soaringkhaled yep. No problem. Huge rpm difference. Laughing or bound up is where they have issues.

[@SeekingTheVerdants]

I think that you could have squeezed out a couple more MPH if you had brought the toe back on. What do you think?

[@hyperc5249]

Absolutely. I'm going to do some upgrades and tuning, then hit it again.

[@unloveableandre]

8:30 The first thing I had to do was to remove the steering wheel foam, that remote has an issue, and the foam will get stuck. Annoying, but easy to solve. I had the MJX Hyper Go H14BM that uses the same remote as the V1, same issue, had to remove the foam.

[@hyperc5249]

Good to know thanks.

[@JUSTHAVEFUNRC]

I’m eyeballing the black one. I’m going into the airforce in a few months so ordering one’s gonna be on hold for a bit.

[@hyperc5249]

Awesome. Thank you for your service. When you do order one, you won't be disappointed.

[@tripyramidpictures9224]

Hex ALWAYS strips!

[@jasonh8470]

Not if you use the right tools. I only use MIP or Arrowmax.

[@tripyramidpictures9224]

@@jasonh8470 i use the Tamiya, but some manufacturers overtighten.

[@gjreynolds9598]

Love your videos. Just got one of these for my son and it's awesome. Need help tho, after a couple of days running the steering is now backwards. Left goes right! Do you know if there is a button sequence on the controller to get it back?

[@hyperc5249]

Thanks. I'll take a look at it and get back to you.

[@FarmerFpv]

I just saw on eBay they were selling the black Mamba version for $125 with one battery and free shipping. I ordered 2 of them. l have a disease I know. As long as I take the wife on vacations once in a while she won't say a word, lol.

[@hyperc5249]

Welcome to the club, my man. That rigs is a ton of fun. So fast on 3S.

[@rocmacgeorge5910]

Just got mine yesterday looks amazing can't wait to run it battery tray is Velcro straps which I like better

[@hyperc5249]

Me to. Allows you to use different size batteries. Awesome rigs.

[@driftr6068]

This video helped me with my choice, much appreciated sir Went with V2✌

[@hyperc5249]

Awesome. You won't be disappointed. These rigs are absolutely some of my favorite bashers.

[@bladeblade8443]

I have the exact same but its from Amewi. I was going 47 kmh = 29 mph with 2s.

[@hyperc5249]

Super fun rig.

[@naptime43x]

was there a speed test for Lance? imagine it would be more or less the same as the others but curious to know.

[@hyperc5249]

@naptime43x Yes, he runs in the mid 40s as well. He doesn't see pavement very often. He is a dirt dog.

[@naptime43x]

@@hyperc5249 right on, that is probably what i would be doing the most. i was looking at these and saw there is a new hatchback style, makes it even harder to decide which one is best haha

[@hyperc5249]

@naptime43x I have a review on that one to.

[@naptime43x]

nice, i will have to watch that one. is there really any noticeable difference in performance in the 4 models? they look about identical from what i can tell aside from maybe a couple difference accessories like battery and wheels.

[@hyperc5249]

@naptime43x no not really

[@Subtle_Outfiting]

Is it still worth it to buy them? Love your content btw

[@hyperc5249]

@Subtle_Outfiting Absolutely. My 2 boys and I run these more than any of my other RCs.

[@stefan-norge]

Fully agree, love them 👍🏻😃

[@hyperc5249]

Absolutely some of the best RCs out there. Bash, Crawl, Repeat!

[@BroZachD7]

Can the 14301 be used on dirt as well or only pavement? Thanks for the reviews man!

[@hyperc5249]

Yes. They are all exactly the same under the hood. Just different bodies. There is not a lot of ground clearance, so it needs to be somewhat flat terrain.

[@lacofd13]

Fun car. My son loves the speed. Too bad the trans blew up the first week. Not worth the money. Black Mamba.

[@hyperc5249]

Really. I have run mine hard and no problems. Replacements are cheap.

[@farmoboy83]

i have to decide between on of these for 120eur or an used arrma typhoon 3s with some extra parts and 2 3s batteries for 250eur...never had a top brand rc but have 2 hbx 16890 (one modded capable of 60kmh speeds on 3s), a fyltx ravine, axyal scx 24 and mn128.

[@hyperc5249]

Offroad typhon on road mjx.

[@farmoboy83]

@@hyperc5249 at the end bought a 1/10 touring absima (same hsp flying fish) brushed and found out how relaxing it is to drift and a big amount of upgrades, bodies and so on for this 1/10 scale cars.

[@josegarcia-bz8ct]

Mine comes in today I’m so happy

[@hyperc5249]

Awesome. Absolutely my favorite 14th scale road bashers.

[@philpowell1162]

I have owned these RC on 3S. There uncontrollable on 3S. I don't understand you are saying there best RC for $145.

[@hyperc5249]

Not to be rude, but maybe it's your driving skills. You can see that I am more than capable of ripping them on 3S. My 10 year old boys bash these around all the time with no problem. Do you have a better $145 RC suggestion?

[@philpowell1162]

@hyperc5249 Witoys 124016 or the 124017 put metal parts on them same price as you put those metal parts. They handle better! That's from my experience! And I wasn't trying to be rude I was being honest. Thank you for your video .

[@jakenefsey9228]

I just got mine did a little drifting with it and after the first run the rear diff is making a clicking noise I'm NGL I'm super bummed

[@hyperc5249]

That stinks. I like to check my diffs before I run them. To make sure they are properly lubed and assembled.

[@Lukas_911]

Hi! Newbie here in RC world. Just saw your video and I have had a crush on this model. I would run it indoor since I have around 600 sqft of available space with smooth surface (ceramic). Max length of room is about 33 ft. I am mostly interested in having fun with drift. Do you think this model would be OK or it's too powerful? Thank you for your input

[@hyperc5249]

Super fun rig. 4 wheel is power slide rear wheel is drift. That's just the technical aspect. Is this rig fun to slide around? 💯 That's plenty of space to enjoy this RC.

[@Lukas_911]

@@hyperc5249 thanks 🙏🙏🙏🙏🙏

[@Tubelok7]

Can the 14302 body fit on the 14301? Thank you!

[@hyperc5249]

Yes

[@DarcyFreshwater]

is there a lancia in the V2?

[@hyperc5249]

Yes. I haven't seen it for sale yet.

[@arobyte]

Can you get different bodies on these chasis. Very new to RC. Ordered one. On its way. Would love a 2004 WRX STi body for it if possible 😍

[@hyperc5249]

Not that I have found. I definitely want a WRX too. I had the same discussion 2 weeks ago. Lancer, WRX, or another WRC would be awesome.

[@arobyte]

@@hyperc5249 ah.. that sucks. Thx anyway!

[@mikesholty]

I noticed when going full speed it starts to wobble. Should I turn my gyro down a bit?. I’m new to the whole gyro tech.

[@hyperc5249]

Yes. Turn it down in 10% increments.

[@workingclassperson2124]

I’m getting one later today or tomorrow from Amazon

[@hyperc5249]

You will definitely not be disappointed. Best bang for the buck in bashers.

[@todd92371]

Was wondering how you raised the body up on the rally car?

[@hyperc5249]

Raise the rear body post up a notch on the shock tower. Put a few washers as spacers underneath the front body post mount.

[@todd92371]

Thanks so much!!!!@@hyperc5249

[@ec1lpz]

Will the original controller work with the new car, I like the throttle controls

[@hyperc5249]

Yes it should bind up.

[@paulbiado9014]

Great review!!

[@hyperc5249]

Thanks. Awesome rig. Sub and like.

[@rerunracing]

Only one of these are made by hyper go is that correct. Are the parts interchangeable???

[@hyperc5249]

They are all made by MJX Hyper Go. All the parts are interchangeable. Awesome little rigs.

[@moraesmarcobsb]

I just got mine, the CITROEN....

[@hyperc5249]

Awesome. It's definitely one of my favorite RCs.

[@goldenmanuever1176]

That is actually a nice Delta HF Integrale Martini body. Like others, seems you are having some body fitment concerns. Any solutions to that?

[@hyperc5249]

Yes, I raise the body posts. I discussed that in the video. It works perfectly now.

[@goldenmanuever1176]

@@hyperc5249 sweet thx dude, sorry must have missed that part...

[@hyperc5249]

@goldenmanuever1176 Anytime. That's why I do this. It's absolutely one of my favorite rigs.

[@thepatternforms859]

What is the biggest/best 3s battery for the v2 truck?

[@hyperc5249]

Inise the iconic 3S in mine.

[@haizulzikri789]

Hye. How to put the esc fan on v1 ? It seems no screw hole on the esc to put the esc fan . 😅

[@hyperc5249]

It screws into the heatsink fins. Most esc fans mount up like in this way.

[@haizulzikri789]

@@hyperc5249 oo i see. I thought it should be a hole on the esc. Thanks for your answer 😁

[@hyperc5249]

@haizulzikri789 you're welcome

[@carlosgrdo]

Do you know if the lancia body fits on the truck chassis?

[@hyperc5249]

Yes with different body posts.

[@Themlpg73]

I’m about to order one of the v1. Which one would you say is better? Would the Lancia be worse off road than the other one?

[@hyperc5249]

They are exactly the same underneath. So I would go with whichever body appeals to you the most. If you get the lancia you will have to raise the body for tire clearance like in the video.

[@Themlpg73]

Ok thanks a lot. Yeah I do like the Lancia more actually.

[@froggyfresh5193]

PLEASE HELP!! i just got one of these for my brithday and i put the new drift tires and and it drifted perfectly for about 60 seconds and now i cannot use the car at all without the etire thing spinning out the second i pull the trigger ive tried to reset and mess with the gyro but the very vague settings provided by mjx do not tell me how to set it. I cant figure out whats wrong was having a blast and now i cant use it please help

[@hyperc5249]

Did you check the throttle trim on the remote? Also, try to remove the battery from the car and remote wait a little bit, then put the batteries back in. Could be the remote or ESC. The Gyro should just be set at 50 for this test. You can also unplug the Gyro completely.

[@froggyfresh5193]

@hyperc5249 I figured it out, one of my wheels was real loose so it was giving in on the one side which would explain why I only saw it spinning out in one direction. Thank you for the advice I really appreciate it

[@skyworth9v886]

Hello so far only this video has covered every thing about 14301. And i wanted to buy one of these. And i wanted to know what dimensions are they. If you can please measure it. (width and lenght from wheel to wheel)

[@hyperc5249]

Sure. I will.get back to you.

[@hyperc5249]

18cm x 20cm

[@skyworth9v886]

@@hyperc5249 thank you

[@giorgiotibaldo]

Can you give a link to buy a new set tyres for Lancia Delta ?? Thank you

[@hyperc5249]

HYPER GO 1415B1 1/14 Scale RC Car Accessories Rally Wheels, Suitable for Hex 12mm, Spare Parts RC Vehicle Wheels & Tire Sets for H14MK & 14301 & 14302 (Pair) a.co/d/9s9yVdu

[@giorgiotibaldo]

@@hyperc5249 thank you

[@A1trizzy]

I cant find the black mamba. The link takes me to sub zero. Which would anyone choose between the14301 or 14302 (blue truck or rally car)

[@hyperc5249]

On road 14301 off road 14302. Here is a link to the H14MK. HYPER GO 14301 1/14 RTR Brushless RC Drift Car with Gyro, Max 34 mph Fast RC Cars for Adults, All-Road Street Bash RC Truck, Electric Powered 4WD Remote Control Car for Drifting Rally a.co/d/7Pc8AmL

[@A1trizzy]

@hyperc5249 thanks for the fast reply bro u earned my sub! 💯🏎

[@MarcoL972]

These are actually the V2 and V3. V1 did not come with the gyro. I got sub zero and lance off AliE then a month later they added the gyro. Figures lol.

[@hyperc5249]

Wow. I didn't know that. Good info. Thanks.

[@MarcoL972]

@@hyperc5249 ya no problem. great video! I like how you compared all 3 side by side. I bought 14301 the beginning of the year and liked it so much I bought the 302. With or without gyro it’s an amazing little truck. Have you had to replace the wheels yet? They don’t last long on 3s 😂. Finding wheels and tires that fit is tough. They sell the OE wheels on AliE but their expensive

[@White000Crow]

Those things are rippers!

[@hyperc5249]

Right! MJX is setting the bar very high. I hope the come out with a 10th scale soon.

[@jearach]

PLEASE PLEASE Tell me the name of the song plaing in this video. around 12 min 42s. Thank you

[@hyperc5249]

I'll take a look and get back to you.

[@scaleworksRC]

I want to get one of these, but a local shop in my area has the Aarma Infraction for $160. It looks identical to these but maybe the radio is better quality. Which would you choose?

[@hyperc5249]

Both! LOL..... That's a tough one. These are brushless with a gyro. That is a 1/10, tho. That's is too close to call. I like both MJX and Arrma. So it will come down to a scale size vs. electronics decision. Let me know what you choose. Bash, Crawl, Repeat!

[@scaleworksRC]

@@hyperc5249 Thanks for your input. I'm getting back into the hobby and appreciate the breakdown. Way better than the stuff we had as kids. They look like a lot of fun!

[@unloveableandre]

Those are inspired by the Infraction models (6S, 3S) If you can get a Arrma Infraction 3S for $160, do it. But I believe it will be the brushed Infraction 1/8 Mega model

[@hyperc5249]

Get what you want. The infraction is brushed but you can upgrade over time. I like them both. Arrma does have a 2 year warranty on the stock parts. The MJX will be a lot faster out of the box.

[@scaleworksRC]

​@@hyperc5249 Well, I got a 14302 for Christmas and love it! Only issues are the servo getting stuck with dirt so I have to use a screen for rally, and the diffs are way too loose for my liking so I'll have to thicken them up some. Had to toe in the fronts as well.. I'm not sure why they are set so far out.

[@todd92371]

How do the tires hold up on these on pavement? Thanks

[@hyperc5249]

Great. It's better than any 10th scale I have. The replacement set is cheap as well. So when you finally need a new set, it's not costly to replace them.

[@jerryhermann7233]

Is the wheel base the same on the 14301, and 14302?

[@hyperc5249]

Yes

[@ecm0816]

How can you adjust the toe in and out?

[@hyperc5249]

The suspension links are threaded together. By turning them, you can adjust the length, which will adjust the toe in and out.

[@coopowski]

I’m new to the RC hobby and bought a 14302, how did you raise the body 1/4”? Can the stock posts used to achieve this?

[@hyperc5249]

Yes. Move the rear body post up a screw notch. Then, use some small washers underneath the front posts. You picked a great 1st RC car. It's one of my personal favorites.

[@coopowski]

Awesome! I’ll mod tonight! Was worried about tearing up my body, I know I’ll be ripping up the tires though 😂

[@-Astro--]

glad I found this as I'm also getting this to get me started and was just about to ask, so thanks 👍

[@-Astro--]

There's an option for a extra battery which is the same, would you recommend getting it?

[@hyperc5249]

No problem.

[@prob6999]

Hey man I need help, how do I raise the body on the rally car mine sits a little funky and I need to raise it up

[@hyperc5249]

Ok. So, remove the rear mount and cut the 2 top screw mount posts off with a pair of side cuts. This is so you can raise it up on the rear mounting by 1 set of holes. Next, get 6 washers and use 3 underneath each side on the front post mounts. This method worked perfectly on mine. Dont forget to like and subscribe.

[@prob6999]

@@hyperc5249 woo hoo thanks for the fast response, while it’s still sitting out I need to get some washers thanks

[@hyperc5249]

@prob6999 No problem.... problem. Pun intended. That's why I do this. That little rig is awesome. BCR!

[@chuckwalters4759]

The clear plastic covers are worthless tho. I just use the extra hood clips because YOU WILL lose them alot.

[@hyperc5249]

If you watch my 14210 video. I highly recommend the body clip retainers. I like the dust cover, but It does allow some rocks to get in.

[@unloveableandre]

3:50 English and... DOYTCHEE!

[@marioromero1333]

I got one of these recently. Is it normal to have lag on the throttle response. When you pull the trigger. Like from a dead stop. Or does it take right off. I don’t hear anyone mentioning this in their videos. Or do I need to adjust something?. Like recalibrate? Great video too. Very informative!!!

[@hyperc5249]

Yes. There is a small amount in the V1 models. The H14MK ESC seems to have different programming. The throttle response and punch are more responsive. For $150 RTR it is still amazing. The fact that it has separate hobby grade electronis make it easy to change them out. I am going to change out the 14302 RX/TX for more responsive control.

[@bs0u0155]

With gentle throttle, it does cog slightly. This would explain a little throttle hesitation. Relatively high kv motors and budget ESCs do this. A better ESC or even further, a sensored set up would solve it. But, for the money it's great.

[@hyperc5249]

@bs0u0155 💯

[@nickhathaway4617]

Are the trucks and car the same length

[@hyperc5249]

Yes. They are all the same chassis. They have the same width and length wheelbase. They body is the only big difference.

[@nickhathaway4617]

@@hyperc5249 cool I kinda like the truck a little more but right now the car is cheaper so was thinking I could get the truck body down the road if they were the same. Nice video and thanks

[@hyperc5249]

@nickhathaway4617 Your welcome. That's why I do this. To help people make informed decisions with their hard earned money.

[@thekingandi1705]

Where did you get the 3s battery?

[@hyperc5249]

Some came with the car from aliexpress. The others I purchased ff of Amazon. OVONIC 3s Lipo Battery 35C (Burst 70C) 2200mAh 11.1V Lipo Battery with Dean-Style T Connector for Airplane RC Quadcopter Helicopter FPV Drone(2 Packs) a.co/d/5274mhG

[@currynuts8843]

@@hyperc5249I just bought the AliExpress 14301 with the 2 3s lipos from the link you gave. Do the included batteries perform speed and run time wise? Great video btw

[@hyperc5249]

@currynuts8843 yes. The 3S batteries I received with my 14302 are actually some.of the best 3S batteries I own.

[@currynuts8843]

@@hyperc5249 do you charge them using a balance charger or is it ok to usb charge, sorry for the dumb question, very new to Rc.

[@hiramrodriguez4323]

Do you have a part # for the esc fan?

[@hyperc5249]

16397B

[@hiramrodriguez4323]

@@hyperc5249 Thanks. I'm going to add one to my 1/16. It needs it on 3s

[@hyperc5249]

@hiramrodriguez4323 Any time bro.

[@fajarrevi9977]

Weltoys is the best in same price

[@hyperc5249]

WL toys make some good products, but they don't have anything close to as good as the 14302.

[@Jeff-fv9rk]

Tanks brother, that was a helpful vid

[@hyperc5249]

You're welcome. Awesome rigs.

[@Hannsom7]

i have the lancia how fast is it top speed? and how did you raise body post?

[@hyperc5249]

Move the rear body, post up one. Notch on the rear shot tower. Put a quarter inch spacer underneath the front body post. Top speed was around forty one miles per hour.

[@FarmerFpv]

They need to stop with the Philip head screws. The price for putting hex head screws is next to nothing difference. Or at least they can offer a stainless hex head screw upgrade kit for 10 bucks or something. It's hard to find a hexhead 2.5 mm self tapping threads in the US. In china they are abundant. Oh well this thing is definitely worth the price with or without the hex head screws 3:35 . Best RTR mini street basher on the market. I have the n ore expensive Team Associated mini street basher and its outdated compared to the MJX Hyper Go line up. The UDI RC Pro is garbage compared to the Hyper Go.

[@hyperc5249]

I am a fan hex head screws.

[@HoltJonathan-y9z]

Brown Karen Anderson Linda Perez Margaret

[@emjr114]

Been in limbo for the past few days about getting 1,,, this video sold me going on Amazon NOW🫡

[@hyperc5249]

I'm glad i could help. Great timing. They're on sale. MJX is awesome. You won't be disappointed. Bash, Crawl, Repeat!

[@emjr114]

@@hyperc5249 arrives today, ready to leave work early lmaoo. Thx again for the review bro💪🏼