BEST Bush Conversion - FMS Cessna 182

[@TailHeavyProductions]

Want a 182 of your own? Consider purchasing one via our affiliate link: www.fmshobby.com/products/fms-1500mm-cessna-182-pnp?_pos=1&_sid=c80c621f5&_ss=r&ref=Hm97_0xLEWLYuu

[@AbdullahNajib-b9z]

i looked at the link thats so expensive are there any rc trainers you can get for under £140?

[@kiastingz9924]

@@AbdullahNajib-b9zsadly there aren’t many trainers on the market for that price. Family makes a pa18 cub for 200$ usd. They also sell the ranger for 229$ But what I would reccomend is the Hobbyzone Aeroscout, ready to fly is 199$ and Without a battery and transmitter is 179$

[@jimmcdougall9973]

I can’t believe you plugged it into a TV 😂😂😂 The best RC entertainment on the Tube. Thank you!

[@AL-RCjunkie]

I'm pretty sure Jon would advise that you set all of the servo travels to 150% and shove the battery into the tail for perfect high alpha setup. Assuming you've already split the flaps, ailerons and elevators out, installed a 10+ channel Rx and use half a dozen mixes for gains, throttle and various wing configurations. Easy peezy! 👍 Jk, Jon! Brian made me do it 😊

[@TailHeavyProductions]

Sounds like a lot of work.

[@chillville5571]

Theres something called a wedge washer that will 100% fix your slanted wheel issue. Just add the washer to the side of the axle that doesnt sit flush and it will then be flush!! Nice project!!!

[@TailHeavyProductions]

There's something more entertaining about just letting the wheel wiggle, though. 😂

[@AbdullahNajib-b9z]

i think my rc plane scratch build may be too expensive to build. for now,i am just watching you.

[@RubyS.1]

The CGi is incredible I can't tell if it's crayon or colored pencil

[@SunriseRCAviator]

Nice experiment doing a tail dragger out of this plane. On the other hand a Bigfoot is already a tail dragger in a better size and flys great.

[@user-ry1jm9hw6w]

Been watching utube all day and found your channel, bloody marvellous and very funny cheers

[@morkshanmedia3998]

Hold up I’ve just had a light bulb moment. Put Uma Grip on the tail to slow down even faster. Also probably less likely to nose over. Also you guys r obsessed with uma grip so the more the better right?

[@TailHeavyProductions]

We didn't have issues with it nosing over for normal takeoff and landings. Trying to purposely fly the tail while holding down elevator is what did it in.

[@morkshanmedia3998]

@@TailHeavyProductions ye it looked pretty good for this one I was just thinking about it in general for other aircraft like the viper bush conversion. Also mainly just because it would make the plane slow down faster (more friction)

[@curtisvonderlippe]

Love it, you make me feel better about my repair ability. I'm better at flying into fences. Love the creativity. I would like to try PCBway for parts, but I don't have the ability to design them myself. Do they help with that?

[@AerialAcesRC13]

How many timbers will carry my surron???😅❤

[@JackJones-t7l]

That was funny, but why so long between videos? I get that new england is freezezing, its 30 degrees in texas, but you said to just get hand warmers and transmitter muffs and go fly anyway.

[@TailHeavyProductions]

Check out our community post from a month or two back. Life is busy for us these days - but we're doing our best to fit in what we can for uploads! Thanks for watching.

[@pippyquark]

@TailHeavyProductions why was this video late?

[@TailHeavyProductions]

Life is busy for us these days - but we're doing our best to fit in what we can for uploads! Thanks for watching.

[@pippyquark]

@@TailHeavyProductions OK! Try letting us know if a vid is late next time please

[@TG-ko1vt]

Tasty

[@pippyquark]

Also the gear looks like it should've been moutned further back and flipped around

[@TailHeavyProductions]

The idea was to mount it to an existing hard point on the fuselage. The location of the tires is where they should be on any tailwheel airplane: just ahead of the leading edge of the wing.

[@thecatofnineswords]

You guys are lunatics. I have a similar 182, but it's got a one-piece wing, so don't have to suffer through watching your mum through the damn ancient EGA connectors.

[@sawyerheslep8493]

This vid is mid.

[@Michael-j6s]

GET O-

[@bleudie173]

Your life is mid

[@waitemc]

The middle is mid

[@monchichis333]

Bryan Philipps your daddy? or RC Saylors your daddy?

[@TailHeavyProductions]

Your mom is mid.