Before applying the chain lubricant you need to clean your chain thoroughly. Once clean apply a wax based lubricant for best performance. Reference charts.... 559782270843...
Пікірлер: 798
@HooxNZ6 жыл бұрын
chains already looked clean...perhaps that says something about my bike maintenance
@joaotakayama3 жыл бұрын
A true legend, one of the most down to earth cycling REAL TIPS channel. Kudos!
@Rikitocker7 жыл бұрын
One of the most informative and well made Cycling tech tip vids on the Tube ... outstanding info and presentation - thanks mate and bless good old Aussie know how.
@goncaloferreira97465 жыл бұрын
Rikitocker que os
@WalrusRiderEntertainment7 жыл бұрын
Ok. Serious question. What chain link do you use? I was looking at a KMC one for my Campagnolo 11 speed but they suggest to replace them after 2 breaks. What is your experience with master links and what do u recommend? I always use a brush cleaner as Campagnolo don't recommend the Master link..
@stevenleffanue7 жыл бұрын
+WalrusRider Wipperman connex make the best removable link,Jon. All stainless,removable with just your fingers and last longest. Im still using same links after about 15,000km. Compatable with all chains too.
@LighthawkZ652 жыл бұрын
I was looking coal, but I found diamonds, your explanation it is an absolute best on the way you explain things through all the video. I was making a decision on what to buy, and I was about to buy the ultrasonic cleaner but, then you came with the results. I'll definitely will buy the chain cleaner because of you. I saw different opinions through Amazon and KZbin, you know, usual stuff that makes you think. But you came up with a solution so clear, very detailed and explained that I have to say thank you and God bless you man. You've saved me thousands of dollars for the next years
@stevenleffanue2 жыл бұрын
Good to hear Carlo.
@jonniemadsen74243 жыл бұрын
Hi just tried Your waxing on my hometrainer bike. it is sooo great. I started the chain in gasoline, then my ecological degreaser, then cellulose thinner, acetone, and a 1 hour cleansing in my ultrasonic cleaner with all the good stuff in. Ended up by boiling the chain for 10 minutes in water, the dried it. Man it was so clean you could use it for medical purposes. Put it in the hot wax for 1 hour, with lots of stirring, and just mounted it. Runs like a charm. Thanx for your great videos and always new ideas how to get the best cheapest. Keep up the good work. :-)
@chrismaddox155 жыл бұрын
Oz... I've learned so much from watching your videos. Thanks for taking the time to be objective with products and showing us cost effective ways to fully enjoy the sport. Cheers from the US!
@stevenleffanue5 жыл бұрын
Thanx Chris. Greetings from Australia too 😎
@garyhildebrandt7 жыл бұрын
looks like I'm going to save a bunch of money and have a cleaner chain. sounds like a win to me. thanks for the great videos.
@tiptopstuff7 жыл бұрын
Hello from England, great video, thorough testing, I'm convinced. Please keep up the good work. Cheers👍
@stevenleffanue7 жыл бұрын
+tiptopstuff Giday tiptopstuff from Australia :)
@RobPennefather7 жыл бұрын
Hello from Brisbane! Love your videos - some of the best bicycling advice around, I reckon. I've been using your degreasing and paraffin wax method on a chain since new, and it is way better than the previous chain, so smooth. I degrease and wax the chain when it needs it, which is after about 250 kilometres. There's no black build up ever, and the cassette always stays shiny, though I do degrease it every 500 km's because I feel like it, not that it needs it. Thanks for all of your thorough experiments and good advice - great work mate!
@stevenleffanue7 жыл бұрын
+Rob Pennefather Thank you Rob,glad you like the vids. Yes the liquid wax method is good but if you can do the wax bath method (next video coming) its even better in all aspects.
@vdammfra7 жыл бұрын
Greetings from Belgium, Europe. Your videos really opened my eyes, from now on, I'll do it your way! Thanks for sharing your know-how!
@stevenleffanue7 жыл бұрын
+Frank Van Damme Hi Frank from Australia. Glad you find the vids helpful. Cheers.
@alejandrobadillo6137 жыл бұрын
I found your videos very helpful. This has been definitely one of my favorite. I like your style, pretty straight forward and friendly to the every cyclist. I can't wait to share your channel with my friends. Keep it up! Greetings from México!
@stevenleffanue7 жыл бұрын
+Alejandro Badillo Thanx Alejandro. G'day mate from Australia :)
@stevegleason66747 жыл бұрын
oz cycl
@blackswann95 жыл бұрын
The petro chain clean is the way to go for sure! I let mine sit for 12-24 hours, rinsed it in MS, then waxed the chain using the DIY method and it worked perfectly. My wax barely gets dirty. The wax got dirty all of the time until I cleaned my chain with the petro. It worked so well I did the same thing to my husband's chain. we get asked all the time what we do to our chain. Yes, it's a bit of work up font, but once you have your set up going its fast and really simple. Thanks for this video OZ cycle. I have saved so much money using wax over buying oil and washing my bike all of the time.
@stevenleffanue5 жыл бұрын
Nice to hear its working for you guys 😁
@cliffhaston577 Жыл бұрын
Was surprised that the winner was not the ultrasonic cleaner. Great test and great video!
@patrickanandd7 жыл бұрын
Hi Oz , i have been watching DIY vdos on cycle maintenance , and specially the chain cleaning, and you have been by far the best in all the youtube channels that i have subscribed to ,i did make the chain cleaning container not exactly like yours but still made my own version for it , but what helped is the idea , the mesh was like a saving grace in the conatiner for cleaning smaller parts which can easily be lost or dropped, cut to the chase , i did it bought a 9 speed missing link, cleant the chain like you mentioned in your VDO and now my ridding is so smooth and effortless ..... A BIG BIG BIG THANK YOU > your the best teacher a double thumps up for you ...
@patrickanandd7 жыл бұрын
and yes the first step towards it was your VDO on wax lube , and my search for xylene ... thanks for everything
@esabaliauskas5 жыл бұрын
What a great video! Thanks for this in detail experiment and advice!
@sunnyhu48554 жыл бұрын
This is AWESOME video. Very detailed. Great comparison. I like this.
@MP486 жыл бұрын
Excellent video. I've been using various home made shakers to clean my chains for years. I just don't like using gasoline but I Do often use gasoline +two stroke oil mix left over from my chainsaws fuel supply. After cleaning the chain I filter the gasoline oil mix through coffee filter paper to remove the residue and then run it in the chain saw. There's two fuel filters between tank and carb so the gasoline is the easiest to get rid of for me. Keep up the great practical tips. Moe people should try your ideas because I've been doing many of these things for years including making my own chain lube :thumbsup:
@estebana.miralles36193 жыл бұрын
Excellent video; very much appreciated indeed. Cheers from snow covered Philadelphia
@paulbradford64753 жыл бұрын
Very scientifically done. Bravo. I thought the ultrasonic cleaner would be the hands down winner, but it's nice to know that good old gasoline will do the trick, followed by an IP alcohol soak.
@deldridg5 жыл бұрын
Lots of effort went into making this vid and regardless of some protestations about scientific method etc. (some people seem to default to whinging rather than showing gratitude), I got a lot out of it and appreciate your time and effort. My son and I do the maintenance for our family mtn bikes (4) + my roadie and are always looking for better ways to keep our bikes running well and lasting longer. So big thanks and cheers from Sydney - Dave & young Will
@stevenleffanue5 жыл бұрын
Hi Dave and family. Glad the vids are helpful for you's. There are always viewers who negatively comment before actually trying how its done in vid. See you at the Tour Down Under?
@deldridg5 жыл бұрын
@@stevenleffanue Just human nature at play I suppose. We'll be in Melbourne during the TDU but will get there one day. We spent last week cycling around Canberra - my daughter (6) did a couple of 22 kayers and a 42k around the city and my son (8) and I did some additional sessions around Stromlo where he really pushed himself to do the loops without stopping, including a number of full climbs of Stromlo and even ran over a brown snake across the track. We are now kitting up to do some self-supported bike camping trips. Love it that you're keen to share your hard earned wisdom with us amateurs and now we need it more than ever. Cheers - Dave
@stevenleffanue5 жыл бұрын
Well done! 😎 ...thats quite a big distance for your kids.
@deldridg5 жыл бұрын
@@stevenleffanue Thanks mate - no computer games, TV or iPads and you magically end up with fit, engaged kids who love being outside and can push themselves like you wouldn't believe [ ant]. Today I installed quick release links onto all our bikes so I can properly clean our chains, cassettes, rings etc. on the strength of your videos. Is it normal to get this excited about bike maintenance?? About to head to Port Macquarie for a week of riding, mountain biking etc. - can't wait. Cheers and thanks again big time, Dave
@stevenleffanue5 жыл бұрын
I agree....my kids were brought up on a farm,climbing trees,bonfires,up early milking goats,etc,etc. Kids learn so much more about life than a screen could ever give them. Nice you got the links,make cleaning so much easier. Have a good time at Pr Macquarie.
@patrickford96156 жыл бұрын
Ive been using the gasoline and paraffin method for this season, on your advice, and I love it. It repels dusty dirt and keeps the drive train very clean. It takes me a couple weeks to start hearing when it needs a redo. Good stuff. Thx
@stevenleffanue6 жыл бұрын
+Patrick Ford Glad to hear and thanx for your feedback Patrick. :)
@rterry27526 жыл бұрын
if you can hear chain wear, you have waited too long to lube.
@cspower72597 жыл бұрын
love the dummy bike idea. i knew there was a use for them old bikes. will be giving that a try as soon a possible. thanx
@salkdjfasldkfjsdlk6 жыл бұрын
Agreed. I just cleaned my chain in my ultrasonic cleaner and the 2nd 15 minute cleaning still had a lot of grease left behind. I kind of wish I had done it a 3rd time to see what would happen. Thanks for the video.
@casualguy3935 жыл бұрын
Excellent video. It's very thorough, and I love the attention to detail. If I had the room to doo all of that, then I would, and I just might after getting my new chain in a week or so. However, and this of course doesn't clean and lube as well as the steps done here. Hello everyone. My name is Andrew, and I use WD40 on my chain. I tried to stop, but it is just so damn convenient. I spray it only on the chain and let it sit to loosen up the grime while I give the whole bike a good scrubbing after a ride. Once I dry the bike I power wash the chain with the highest setting on the water hose to blast out the majority of gunk while rotating the chain backwards. With a dry towel, I wrap the chain, and dry it by rotating the chain backwards again. After the chain is dry, I spray a light coat of WD40 on it again. Then wrap the dry towel around the chain to remove most of the WD40 from outside of the chain, leaving it as dry as possible. The pins will have WD40 on the inside where it is important, but the outside won't, leaving my cycling clothes spiffy cuz that is what's important ;)
@bobstevens90407 жыл бұрын
Enjoyed your informative video Sir. Greetings from the UK
@jodyhodge21295 жыл бұрын
Wish I saw this a day ago. Just ordered one of the park tool chain cleaner and solution combo. ..
@MrGichinfunakoshi7 жыл бұрын
Nice ORBEA bike!! Greetings from Spain.
@Tearstank6 жыл бұрын
Have to agree with the lubricant statement, paraffin is great, I just started use pure paraffin although Oz means some paraffin oil should be added, in any case the friction is among the lowest you can get and above all the drivetrain stays clean! No more oil/dirt mix gunking up the drivetrain and the bike cleaning is easier than ever!
@dsonyay7 жыл бұрын
a good way to do additional cleaning... when you have the chain hanging, spray it heavily with brake cleaner spray... that will blast out any remaining crud. it also drys quickly with no film.
@Chitown3887 жыл бұрын
Greeting from the US of A! Very nice video. I have been using WD40 to degrease the chain and then use the clip-on brush cleaner with dish soap to clean the chain. Despite all that I will still have black stain on my finger by touching the chain. I am going to try the homemade method now; that seems to be highly effective and simple enough.
@slavojalois16392 жыл бұрын
Love your work, Ozzy Mate!
@bobcatt22946 жыл бұрын
It's people like you which has the potential to drive property value up, simply because of the value you bring. What a contribution.
@Emperor-Of-Karma2 жыл бұрын
He has taken great effort. Thanks
@sixtysecondsofstephens23865 жыл бұрын
Great video, shock result. Old style wins !!
@nluisa2 жыл бұрын
I really liked the thorough comparison of different methods and their effectiveness. I have stopped using petrochemicals however, even though they do the job very well. I just don't think the cleanest/most efficient bike is worth the environmental cost of having pollutants leached into the soil, streams and organisms. As there are biodegradable options now availabe, I've been sticking to those instead. I don't run top of the range components and I just make sure everything is cleaned when needed.
@LighthawkZ652 жыл бұрын
Exactly, I'm with ya
@scuba453 Жыл бұрын
Could you please share what these options are? Thanks
@nluisa Жыл бұрын
@@scuba453 I use citrus degreaser for the chain. Weldite and other brands make it. It derives from citrus peels. Other products like the muc off degreaser work slightly better and claim to be biodegradable, however, they have hydrocarbons. Many products with volatile hydrocarbons are labelled as inherently biodegradable in the SDS, but that is very different from being readily biodegradable... Muc off boasts about being green, but looking at the ingredients list and their SDS shows a different picture... I've asked them to clarify the SDS against their marketing claims, but got not reply... I've tried a few lubes and green oil is one of the best which is not petrochemical based. Both wet and dry. I also tried the WPL dry lube, but it lasts next to nothing no matter how it's applied. I want to check Peatys (some of their range claims to be readily bio)and Kingud eventually...
@scuba453 Жыл бұрын
@@nluisa thanks for the detailed reply. much appreciated. happy biking!
@bryaneditiontv6002 жыл бұрын
First time watching your content and i gotta say, you got an entertaining bodylanguage
@josephiturra25167 жыл бұрын
Excellent video Mate thanks
@Praveen87374 жыл бұрын
you are amazing!! thanks for all the videos...
@user-jh8no1zb9e Жыл бұрын
ANOTHER BRILLIANT VIDEO -Thanks
@mixchief5 жыл бұрын
oz cycle: How about combining the ultrasonic machine AND homemade cleaner?
@jonvdveen2 жыл бұрын
I love it when the best approach is also the easiest one!
@aazesm6 жыл бұрын
You are The Best !
@meanodustino95636 жыл бұрын
I always used to think a brand new chain that was greased was fine to leave however i was told to get that sticky crap off! Everything stuck on your new chain. Soak it gas or thinner over night shake it and make sure its good. Then apply the lube you want
@ShermanSitter7 жыл бұрын
the one HUGE advantage for the plastic chain cleaner...you can leave it on your bicycle! ...i'm not sure i'm strong enough to worry about the 5 watts! :) however, this was a very interesting video and enjoyed it from start to finish!
@stevenleffanue7 жыл бұрын
+DFTA (Don't Feed The Animals) Your right,most people dont take their chain off to clean so the clip on chain cleaner is so convienient.
@rrrandommman7 жыл бұрын
I use a clip on cleaner, the Parktools CM 5.2 is amazing, you can eat off the chain before you re-oil it and it took me 50 minutes from start to finish.
@djeondj7 жыл бұрын
DFTA (Don't Feed The Animals) in my experience, you get all the chain residue in your jockey wheels, rear cassette/fw from the plastic chain cleaner. Just me though lol
@ShermanSitter7 жыл бұрын
djeondj - I agree 100%, I spend a good amount of time cleaning those as well. I like how into this discussion we all are. Of course, all of our methods are still better than those poor neglected bicycles you hear squeaking down the street! :)
@jompfish7 жыл бұрын
Splendid !'😊👍 Truly amazing ! Thanks for the test !
@Demon09-_-7 жыл бұрын
I ussaly use mineral spirits to clean mine . and a coffee filter after the junk settles and poor it back in the big bottle
@dan1100247 жыл бұрын
I use a chain cleaner device thing and it does great.. Although you seem to barely use any chemical in it. I fill it until it overflows and then run it through, and repeat a few times when it all splashes out of the holes. I can run it through a soapy cloth without any black being left on the cloth.
@stevenleffanue7 жыл бұрын
+dan110024 I tried filling it up more,dan,but same thing...it spilled out,so for the video I put the recomended level.
@dan1100247 жыл бұрын
oz cycle yeah they tend to do that. Mine is larger so it takes longer to empty itself, but messy nonetheless. Does a good job though after a few cycles of it and after a rinse with soapy water.
@TheCrossroads097 жыл бұрын
I'm going to climb Norton with a giant helium balloon attached and go for the KOM.😑 Made a batch of the paraffin lube and I cannot believe how clean it has remained and that I can change the viscosity so it doesn't spray or drip...thank you very much for your tutorial....
@stevenleffanue7 жыл бұрын
+TheCrossroads09 Give Harley a run for his money up Nortons :)
@alantaylor66916 жыл бұрын
Harley is a vile human being.
@michaelallan1087 жыл бұрын
interesting video if you're interested in this type of thing. I can only imagine that it took a bunch of time in setup, filming and editing. given the effort weighing the chains pre and post clean would be worthwhile imo, also identifying the # links in each (I assume the same?). measuring the terps and standardised shaking... maybe too much. thanks
@BPoweredLove5 жыл бұрын
Have you gone mad, sir? You think if one has two more links than another that it will make a difference in the cleaning results?
@makantahi37312 жыл бұрын
@@BPoweredLove chain does not need to be ultra/super/hiper clean, for first cleaning if switch from oil to wax, gaseline/petrol is good to remove all important dirts that matters, when chain is on wax, no need for that deep cleaning, just rewax 2 times and all dirt will go out of chain, i need 8 minutes to make 2 passes of wax on chain installed on bike by useing inductive heater that heats up chain in few seconds and then can be aplied wax
@slavojalois16392 жыл бұрын
@@BPoweredLove The chains looked the same length whilst they were hanging to dry, to me.
@Tethysmeer2 жыл бұрын
You may be the most serious but funny bike cleaner ever!
@kennethwise71086 жыл бұрын
AWESOME THANKS FOR THE VIDEO!!!
@towerhillbilly6 жыл бұрын
Great job!
@OkieBobby5 жыл бұрын
Thanks mate! Very helpful!
@Fincher1237 жыл бұрын
Build myself the Homemade Cleaner and clean it it "Bremsenreiniger" in German ;) also mean Brake Cleaner. There is kind of Petrol and another thing´s in it. But i choose for 1€ a Pencil Holder with a small Grid outside, (so i can clean another Part´s) and a thin can for 2€. My wax is made out of Tealights (8 of it) and Mineral Lamp Oil. It is on my Bike at Monday 13.2.17 and the Condition are dry and cold. My chain look´s very clean and all the other Part´s on it =) To Friday we maybe get wet condition and im exited how the chain will look like =) Ride ~6km it isnt much but the chain can get very dirty even on this short distance. Oh and it is really a much smoother ride and gear change... absolute love it. Happy to see you next time =P
@MrMartinSchou6 жыл бұрын
If you're paying AU$150+ for an ultra sonic cleaner, you're buying a rather expensive one. Additionally, you're getting one that allows you to put every single piece of your chain equipment into it at that. And your pedals, crank set and probably everything else you'd want cleaned, including your entire tool set. And there's nothing stopping you from using a different mix of chemicals either. However, the main advantage of the ultra sonic cleaner over the homemade cleaner, is that you're not left inhaling unhealthy fumes, polluting your lot or accidentally leaving something around that your kids will decide to either sniff or drink.
@Clorophylle2 жыл бұрын
Wear a mask?
@rezganger7 жыл бұрын
I think u missed a spot! Please do them all again.
@ilovephotography1254 Жыл бұрын
Thanks for making and sharing this video comparison... They all do a great job of cleaning. I do feel that the brush system is half baked. You still need to clean the cassette and the chain ring. With the chain on, not so easy. The homemade cleaner you can also use a jar to clean the cassette. The disadvantage with the homemade cleaner is the responsible disposal of the gas. Both the homemade method and the ultrasonic bath also allows for cleaning multiply parts including the cassette and easily access the chainring and jockey wheels. I feel that the ultrasonic cleaner allows for that drivetrain maintenance to be performed easily at the same time with less of an environmental concern.
@antoniosanillan21557 жыл бұрын
sos un genio!! gracias!!!
@pavanatanaya5 жыл бұрын
I use a whiskey bottle with 8 oz mineral spirits. Tie a loop of string through chain, guide chain into the bottle,leaving the tail of the string outside the bottle, cork the bottle. Gently swirl bottle, and let it soak for an hour. Remove chain, hang vertically and spray with rubbing alcohol. Dry. Follow with lube on inner rollers, let gravity distribute.wipe down, install
@darcyfoster88807 жыл бұрын
I would use the second one because you can keep it on your bike and it does just the same as all the others
@xswat9976 жыл бұрын
Personally I use lighter fluid like for a grill to clean the chain. Also it works great at cleaning brushes that are saturated with grease and metal bits
@Desertduleler_884 жыл бұрын
Great video I liked your methodical way of doing this chain exercise, would had thought the ultra sonic cleaner would had trumped the other two methods first time around.
@stevenleffanue4 жыл бұрын
I thought so too,thats why I bought one....now it sits on my bench collecting dust.
@gleenlobos78475 жыл бұрын
¡Excelent video!
@SinnerSince19624 жыл бұрын
I use Simple Green in my 120 degree (F) ultrasonic bath. Then soak it in hot water followed by a good rinse and dry. If I am still getting residue when wiping dry, it goes into the ultrasonic cleaner again to repeat the process. Then, I simply soak the chain overnight with Liquid Wrench Cable and Chain Lube. I let it hang and drip for a couple of hours and then wipe it off before installing it. It's worked for me as long as I can remember. And I ALWAYS clean my cassette and chain rings each time. No point in contaminating my clean chain with those being dirty.
@D.Eldon_6 жыл бұрын
The faulty logic in this test is amazing. An unsafe degreaser/cleaner (gasoline) is used in the homemade cleaning device. It leaves a film and so a second degreaser is required to remove the film left by the gasoline. And yet the author concludes the homemade method works better than the ultrasonic cleaner when the ultrasonic cleaner was used improperly and yet it still equaled the effectiveness of the homemade method when the ultrasonic cleaning time was doubled. How much extra time was required to use a secondary degreaser to remove the gasoline film from the chain? That increase in time and cost of the homemade method was never factored into the comparison. The ultrasonic cleaner may require a little more time (but we can't be sure because the author did not appear to use the correct fluid level -- with the correct level it may not have required any more time). But, in the end (after the extra time) the ultrasonic cleaner achieved just as good a result as the homemade device yet offered a HUGE advantage: It achieved its good results with a safe degreaser and cleaner. No risk to health. No fire hazard. No risk to the environment. No requirement to use a second degreaser to clean the film left by the gasoline. I appreciate Oz Cycling. The author has produced some very insightful and helpful videos. My favorite videos address composite frames and components. Kudos and thanks to Oz Cycling for the great content. Sadly, this video is not among the good ones. And the original Oz video demonstrating the homemade cleaning device is even worse. In that video we see the author splashing gasoline on his ungloved hands. Imagine if he had splashed the gasoline in his eyes as he shook his homemade device! He never cautions the users to the risks of gasoline. Nor does he explain that gasoline will melt some plastics, therefore the user must be careful that the container they select for their homemade cleaning device is approved for gasoline. My advice: Remove those videos. Modify the homemade method so it works with a "safe" degreaser/cleaner that does not require a secondary degreasing. Then shoot new videos with the improved method. This will serve your viewers much better. The homemade method may truly be the "winner" if it is modified for safe use at home by do-it-yourselfers.
@stevenleffanue6 жыл бұрын
+D.Eldon Petrol still cleans way better than my ultrasonic cleaner...tried and tested over at least six months. Try it for yourself...pull the chain apart after the clean and you will see which leaves cleaner pins and rollers.
@D.Eldon_6 жыл бұрын
Sure, gasoline dissolves grease and oil faster than the "safe" degreaser you used in the ultrasonic cleaner. No dispute there. The problem is: gasoline use presents risks to health, safety and the environment. If you base your degreaser selection only on effectiveness as a degreaser, then why limit yourself to gasoline? Why not use acetone or MEK or toluene? They are each more effective than gasoline. I think the reason you're using gasoline is because it's cheap, plentiful and it's the "easy" choice if you don't care about your health, safety or the environment. I'd hate to think what you'd use if acetone, MEK or toluene were cheaper and more plentiful than gasoline! I respectfully recommend that you not advocate the use of strong, unsafe degreasers like gasoline for degreasing bike parts. So far, this video has illustrated the opposite of what you intended. It shows that the Oz Cycling homemade cleaning device works so poorly that it requires a strong, unsafe degreaser.
@stevenleffanue6 жыл бұрын
+D.Eldon The petrol used in the 'Homemade cleaner is about 300mL. It is reused 4-6 times before needing to be discarded. So 50mL - 60mL per use...quite conservative. Yes Petrol is cheap and available worldwide,unlike a lot of other cleaners.
@stevenleffanue6 жыл бұрын
+D.Eldon The petrol used in the 'Homemade cleaner is about 300mL. It is reused 4-6 times before needing to be discarded. So 50mL - 60mL per use...quite conservative. Yes Petrol is cheap and available worldwide,unlike a lot of other cleaners.
@Celisar15 жыл бұрын
Michael Smedley Typical whataboutism. The main commentary was making a good point: always use as best method not only the most effective but also the least environmentally harmful one.
@HughDWallace6 жыл бұрын
Nice. I've used the chain brush thing in the past and wasn't impressed at all so binned it. I came up with my own solution rather similar to your homemade one but use paraffin/kerosene as my solvent rather than petrol but hadn't realised about the waxy film it leaves behind. Best thing I've found in recent months is a can of pressurised degreaser, but it isn't as thorough as your methods and gets expensive fast. I've just bought several litres of aqueous degreaser to experiment with.
@stevenleffanue6 жыл бұрын
+Hugh Wallace Automotive shops often sell degreaser cheaper than anywhere else Hugh.
@lornespry Жыл бұрын
THANKS! I've been clean chains the 'homemade" method for decades, but I never knew it was as good as you have shown. Well I don't do quite your method. I use paraffin. I used to use gasoline when a was a kid. Paraffin (kerosene) is less volatile. Sediment settles on the bottom of the tank, and I can recycle an almost clear jar of the stuff by decanting into a second jar. (I guess you could to the same with gasoline, but, but one has to apply more caution.)
@BrandXsps4 жыл бұрын
Just use Dawn dish soap and hit it with compressed air to dry. Works great.
@ShinyArjunSingh2 жыл бұрын
Nice one, Subscribed. Please keep it comin...
@allanmaureenmacintyre44745 жыл бұрын
Super vid.
@jimmetan70314 жыл бұрын
This is the best chain lubricant because my bike chain is well lubricated and silent. The chain is also very clean compared with the previous wet lubricant I used. Therefore I do not have to clean the chain after every 60-kilometre ride. In fact, I do not clean the chain anymore. I do not mind to tell you I never wash my bike. This lubricant is easy and cheap to make. The only thing I do not like is my wife will give me a shelling when I make the chain wax lubricant because the kitchen will smell of wax. Now I would make it when she is not around. Thank You so much, oz cycle.
@jimmetan70314 жыл бұрын
Oh, I post the above remarks in the wrong section. It should in the section where you oz cycle show how to make this chain waz lubricant. Tk.
@deutscheklassiker56777 жыл бұрын
Great video 👍❤️
@HaveAGoodHeart4 жыл бұрын
Great video
@docles5 жыл бұрын
Hi Oz. I would like you to elaborate on the chain links. You are recommanding the Connext links. For 11 speeds they are definitely more expensive than other brands links just like shimano. Shimano seems to recommand to change the link each time you're operning the chain. What is your opinion on that ? Do you think that the Connext links can be opened more times ? What is your recommandation on how many times those links can be opened? Thanks your videos helping a lot amateurs to take care of their bike efficiently.
@Zobsk15 жыл бұрын
Regarding the magnet, stainless steel is almost entirely non-magnetic so any steel particles at the bottom probably got there by gravity.
@soundninja995 жыл бұрын
Depends on the steel. Most stainless steel pans work with induction stoves
@jocrp64 жыл бұрын
i have never in my life seen so many so concerned about their bike chain and the extra watt's it takes when a chain gets dirty! just my opinion on seeing how much a great problem this is turning out to be? Does no one make a thin ribbed or cogged drive belt to use instead of a chain? Or better yet,, A drive shaft?
@nicholaslittle23123 жыл бұрын
Yes. A belt drive with internal hub gears is an option. They are very durable and low maintenance but cost 4 or 5 times as much. Good for world touring.
@HarmonicResearch4 жыл бұрын
WD-40 changes from a solvent that penetrates into a thick grease that lubricates after a couple weeks of the volatile components evaporating. This makes it ideal for a chain because it will penetrate down to the o-rings and be held there by it's surface tension until it changes to grease. Only the excess will fling off if the chain is used before the conversion process takes place. I spray it on my bike chains with cardboard under the chain to catch the over spray. This cleans the chain. Then, I wipe off the excess, leaving the small amount that penetrated. It, also, is an excellent anti-oxidant to prevent rubber cracking from oxidation. I use it on my motorcycle seat before winter storage and it prevents cracking. Salt spray testing in an environmental lab showed it to be the best at corrosion prevention.
@tingowealeans57124 жыл бұрын
i swear i read this comment on another chain vid lol, from what i've read inc. a few v helpful comments from other WD-40-onlyists I think I'm gna stick to simple regular frequent and liberal application of WD-40 for my new chain on my new bike too
@danshady093 жыл бұрын
bicycle chains don't have o rings motorcycle chains do. i believe wd-40 is petroleum based although its apparently safe on rubber i still would use it if anything it would promote cracking
@Tearstank7 жыл бұрын
These results can be debated. Different cleaning agents were used for the different methods. Also the ultra sonic can have made particles inside the chain loose and when "rinsing" the chains in the end it came out whereas those same particles were still sticking inside the chain in the other chains. I am not saying this is fact, it is speculation however the methods will depend on cleaning fluids used as well so I would not count out the ultrasonic cleaner so fast. I for one would NOT use petrol as a cleaner simply because it is environmentally unfriendly and my apartment would reek of petrol. By taking the chains apart and look at them under magnification after the first cleaning method you would have some more data.
@RasPutintheGreat5 жыл бұрын
Fabulous man.
@JayGee69967 жыл бұрын
Thanks for the video and the detailed way in which you went about the test. I wonder how effective it would be to do a quick 2min clean in the shaker and then a quick rinse under warm water and 10mins in the ultrasonic bath to get the last of the debris out of the chain? Maybe even a shake of the chain to move the links about half way through the 10mins?
@stevenleffanue7 жыл бұрын
+Jackson Gee Thanx Jackson. Yes,there must be a lot of ways to clean a chain....as long as its as clean as possible before waxing.
@JayGee69967 жыл бұрын
Well you've made it much easier to consider what the best method is, so thank you.
@cleancooking5 жыл бұрын
Boil up with shaving salt over 15 min. Works great with cleaning silver and gold after soldering.
@dereksomeda41987 жыл бұрын
used to do petrol clean in 1970. Obviously the chain clean tool is best. I have one and breaking a chain and reconnecting will take longer than the tool. also the author proved the stuff is from the middle is not touching the drivetrain. Also my chains have no holes. I can clean 5 times as often since it requires that much less time and not considering time to go and buy breaker links.
@dereksomeda41987 жыл бұрын
Use a tool and blow dry w 100psi air from compressor nozzle is what i do w mountain bike every long ride. Interesting to see how that stacks up as well.
@SR-fm1ft6 жыл бұрын
I use brake cleaner. Works awesome.
@bipedalame5 жыл бұрын
I now have to degrease my ultrasonic deep fat fryer fab degreaser with a paper towel?
@youeatpoo15 жыл бұрын
IMO the ultrasonic cleaner is the best route. After about 150-200 miles and definitely after a ride, I just take it off, throw it in the ultrasonic for an hour, do some light cleaning to the bike and take a shower. By the time I'm done with all of that I can take it out, let it dry, and paraffin wax it and slap it back on my bike.
@carlosmartinezespinosa89107 жыл бұрын
gracias por hacer las pruebas. Saludos
@kenwebster50535 жыл бұрын
Petrochemical solvents like petrol, turps or kero, are very good at dissolving most oils and waxes but are no good at dissolving water and water is no good at dissolving oils and waxes. Degreaser and water is only a mediocre solvent for oils and waxes because water is a polar molecule and oil isn't. All the degreaser does is weaken the molecular polarization a little. Same issue with green cleaners as they are water based. Alcohol, is a petrochemical chain that has a hydroxyl on the hydro carbon chain. The hydroxyl part of the molecule is polarized. Therefore, alcohol will dissolve water and visa versa but alcohol can dissolve a small number of oils and waxes, usually only some vegetable or synthetic ones, not mineral. For example, caster oil is soluble in methanol but requires physical agitation to do so. If you think about this, it partly explains the results. Using petrol, degreaser and water steps, combines different solvent bases so will flush material that is impeded in these bases. If you were to then use alcohol to flush the water, the chain would then dry much faster due to alcohols higher evaporation rate. Yep, organic chemistry 1976. When I was young, I used kero as a 1st clean and degrease. It was cheap then but isn't now. Petrol is kind of dangerous, it doesn't take much to ignite the vapor and is pretty hazardous for the body. I generally take the chain off, soak and swirl it in turps these days as it's quicker than using cleaners that are ineffective oil and wax solvents. I would agree with using degreaser after that. The in line chain cleaner is largely ineffective because the small volume of solvent limits the dispersion of material cleaned off the chain and a lot of that material gets caught on the gears and jockey wheels to re-contaminate the chain. That makes a big job, uses a lot of rags, wipes etc and you still can't be sure you got it all. This is my main reason for taking the chain off the bike to clean. Thank goodness for quick links. I'm sure some people can point out exceptions, the principal of incompatibility between polar and non polar molecules is only a generalisation for the majority of cases.
@thomask8374 жыл бұрын
Thanks for that excellent comment ! Just to clarify. You soak in mineral turpentine then soak in degreaser as well?
@khalilrazak64864 жыл бұрын
Unfortunately not all of us have quick links on our chains so that they can be removed.
@makantahi37314 жыл бұрын
you complicate simple situation, if you use wax, you can clean chain with wax, take a look on my coment to Mr. Miss
@rcdogmanduh44404 жыл бұрын
@@khalilrazak6486 I never had a quick link on my chains 30 years, my bike I'm building will as I am embarrassed at my chain and cassette are black!
@thehandleiwantedwasntavailable4 жыл бұрын
Khalil Razak A quick link costs almost nothing and installs with ease. There’s no excuse for not having a quick link :)
@EllasPOSEiDON7 жыл бұрын
From the very first second I was cleaning all my parts with gasoline, of course with the best result. I wondering how else could be better, what else someone thought? It is just, so natural movement.
@rodneyletts93807 жыл бұрын
I thought cogs were mads out of wood and used in windmills but chains run on sprockets. Like chainring sprocket and cassette sprockets?
@MstrRo15 жыл бұрын
Why did you use "degreaser", soap and water on the first two chains and gasoline on the last chain? Will the degreaser, soap and water, remove all the wax? If the "Petrol"/gasoline was a better wax solvent than the degreaser, soap, water formula you used on the other chains, would there be more available wax to come off in the Metholated Spirits solution? And if there was more wax to come off, wouldn't the sonic cleaner chain and the blue chain cleaner contraption be more cloudy looking than the chain that you "degreased" in Petrol?
@timothybradek35606 жыл бұрын
That's right, and did you know petroleum never ever breaks down, because once the dirt and grime is removed, it's then returned to it's 'natural' lubricating state. The more dirt.. the more wear. Just think of all the oil we've discarded over the years, when it could've been centrifuged and re-used many times over; such as, aboard ships at sea (HELLO).
@FlowJunkee652 жыл бұрын
Excellent test, thank you Oz Cycle. Question: How do you safety/ecologically dispose of the used petro once you've used it to clean your chain?
@stevenleffanue2 жыл бұрын
Evaporation then wipe out dirt and grease with paper towel or tissues.
@ovidiurada7 жыл бұрын
is it ok to clean your derailleur with petrolium? I mean is it ok to submerge it in petrolium for a good clean
@aleksandardimitrijevic65757 жыл бұрын
How about we pour petroleum in the ultrasonic? And I also wanted to thank you for doing the work and testing stuff and share it so we don't have to. Great job!
@stevenleffanue7 жыл бұрын
+Aleksandar Dimitrijevic Too dangerous using petrol in USC.....otherwise good idea,Aleksander.
@aleksandardimitrijevic65757 жыл бұрын
Yeah I bet it might be dangerous :D I've been cleaning my chain with petroleum for years now and I wanted to try the USC, but after seeing this video, I kinda lost the interest.
@jameslindberg12734 жыл бұрын
Excellent videos and great effort on your part! Curious if paraffin oil is the same thing as paraffin lamp oil?
@sinill174 жыл бұрын
hi~~^^ I've seen it.~~ I have a question.... VEVOR Ultrasonic Cleaner ..Model....JPS-30A..?
@davidhochman45242 жыл бұрын
Thanks for the great video Oz. How did you determine and quantify that the more thorough chain cleaning is worth 5 watts over traditional "quick and dirty" chain cleaning?
@stevenleffanue2 жыл бұрын
"Zero friction cycling" tests and publishes stat's on chain cleaning and lubrication.
@davidhochman45242 жыл бұрын
@@stevenleffanue Got it, thank you for the quick response.
@dquin124 жыл бұрын
Are you adding washing liquid with the degreaser? Degreaser being the stronger acid..what is the point of adding the dishwashing soap?