Best CHEAP Garage Flooring DIY TIPS AND TRICKS | VEVOR GARAGE FLOORING

[@nixx1100]

For your cuts, i would flip the saw blade backwards, you just might be amazed at how easy and clean the blades go through soft/brittle material (plastics/aluminium/vinyl) with no snapping, chipping or bucking whatsoever. Also, for intricate detail cuts (corners, going around posts and stuff), investing 100$ on a dewalt 3" cutoff tool (with the included "multi-material blade") will totally blow your mind, it did mine, total game-changer. Keep up the good work, great vids!

[@JMC8415]

That transition is PERFECT

[@ivettenegron2624]

Hi Josh, when I first saw your video back in January 24' I started my research on the Vevor tiles. Bought them in February . It took me no time to lay them out but the cutting took time. I even bought the saw blade that cuts plastic (doesn't work well the heat damages the titles) did not like the outcome. So, I stuck with the regular saw, like the one you used in this video. I went with 3 color pattern Blue, Gray, and Black and it looks great. I even put the transition plastic at the entrance of the garage which, I unrolled to get the memory out for about 3day and it worked but getting it to fit on the tiles was hard. Since, it was a nice sunny day I put it in the sun for about 30 minutes and it was very easy to work with. I saved a lot of money on this project my time 10 hrs, tiles $300, rubber transitional ramps $110 one long, one short, your video PRICELESS! And as for cleaning blower or vacuum. It's now August 24' and I have no issues with this floor and everyone loves it.

[@dangsdunks]

I was able to rent a tile cutter from a tool library here in Portland and it made the cuts so easy! Roberts 18" MULTI-FLOOR CUTTER

[@archiepezek]

Thanks for the follow-up Josh, your floor looks great.

[@Turbo6Detail]

Not sure if it affects you, but others may want to only put the edging where the tires go up. Looks like this could block drainage going out the garage. But if you run this down the sides of the flooring (parallel to car) it could help prevent water seeping out the sides. Very cool!

[@iZaWrap]

Another helpful follow-up video would be how to remove / replace a broken tile along with best method at uninstalling an entire garage tile set. Nice job on the review. I went a head and ordered after watching your first video. I've started assembling 4x4 squares instead of installing individually and found that trying to take apart a 4x4 section by itself was quite a task. Especially since I had access to the bottom side to get to the locking tabs. I can't imagine how difficult it would be from the top...

[@dubmob151]

It's actually easier from the top if you just use a thin flat blade screwdriver, 1/4" width. Tuck it in between the tiles at the locking tabs and just lever sideways on the locking tab, moving the handle towards the semi circle. It'll release the locking tab and allow you to lift it and separate it. Go on down the line to get the whole section right out from the middle.

[@speeddemon6908]

Nice job on the floor. Just wondering if those transition strips would block the tiles from draining if there was a substantial amount of water? Thanks

[@RyanDaysSocks]

that was my concern also

[@coreymerritt7742]

Right on josh the shop is looking super nice 👍

[@davestewart9146]

The floor looks great and I like your edging idea, nicely done Josh 👍😁

[@KeanetheDream]

Thanks Josh, I ordered my flooring from vevor as well and the edging you spoke of. Love your content

[@vincentolo9271]

Josh, how is this floor doing?

[@patxx1167]

great your site I love it, I saw on several reviews that this brand vevor the tiles are very slippery when you think because in my case I do a lot of vehicle washing so a lot of water thank you again

[@jonathanvictory82]

Definitely need a follow up video after this great one. 😊

[@S_SAutoDetailing]

Im wanting to order this stuff asap. At this point how is the transition strip holding up and the floor overall since it has been atleast a month now?

[@JLamont_3PM]

Thanks for the update. I will be doing something similar to my garage too. Does this come in other colors? Always good content brotha! 🔥🔥🔥👍🏽

[@archiepezek]

They have black, gray, green and blue. When I looked at this a little while ago, some of the colors had limited availability.

[@JLamont_3PM]

Thanks man!

[@mr2hard2see]

Dude I’m buying these this week great video!

[@ivettenegron2624]

As usual nice demo. I watched the first video and your follow up was very helpful in demonstrating how to apply the rubber transition. If I may request, how about an update of your garage flooring to let us know how it's working out. Keep the videos coming.

[@NukeHunter6303]

So a tip/constructive criticism when you edit you can cut out the ok guys part in the sentence and you’ll have a smoother transition between cuts.

[@dscarsella1]

Hey I live in the south with a ton of pine trees..what would you use to remove it safely...high end cars..I use gogone on my truck not worried etc...I searched your videos and came back empty...trust your opinion..

[@seashackf1]

Love the work space in the garage. Man, you lucked out finding a place formerly owned by a car guy.

[@imjoshv]

Yeah I agree!!! Thanks

[@sigma9102]

I can't image over a short period of time the buildup of tiny rocks/sand/sawdust/bugs under that tile. Not to mention anything dropped that can pass thru those slots is gone until you lift up the tile to retrieve it.

[@dandezz]

RADGARAGE rick has a good video showing how to clean your floor.. Super simple

[@lonewolf4827]

Solid woukd definitely be best

[@davidortega7496]

Josh, Did you use the beveled edge ramp/trim that is low, high, or mega profile?

[@jebt2921]

Same question here. I just ordered these tiles directly from vevor and considering the threshold you used. How is that holding up?

[@semperfimsgt896]

I have the flooring and going to start soon. Could you please answer this question? Thank you. Great video!

[@semperfimsgt896]

He used the Mega profile as it is for 1/2" tiles and I just measured, and it is 1/2"

[@DauntaLong]

Turned out great

[@ronniepearson7192]

Hey I have a video idea for you I know you use the maxshine m15 pro polisher can you make a video on changing the carbon springs on them to maintain them

[@elvispjetrovic]

Hey @imjoshv did you try the actual Swiss trax edge ? Also are you making a video for one year update ? I just installed these myself and thinking about ordering both Swiss trax edge and the edge you ordered from Amazon.

[@TheKbarrentine]

How are these holding up? Are you driving a car over them or just using as a workshop?

[@ScottShirey-h2v]

Out on Amazon and out on the company website. Another great opportunity missed. Thanks for the suggestions though.

[@imjoshv]

Oh man… back out of stock??? Keep an eye on them and I’ll try to post an update when they are back in again

[@bigstickerperformance6670]

Good solution 👌

[@TonyMarschner-i4g]

do you have a link to order the rubber transition strip?

[@KnockTsuKow]

for the transition rubber strip, did you go with the 3/8 high profile or 1/2 mega profile?

[@RADMANLIFE]

Jack stand and Jack durability test?

[@JoeAndMattsDetailing0]

Use a heat gun put some heat into it and it works. I did that to mine.

[@tomxz1213]

Where you buy your entry transition ??

[@dtran22]

Looks nice! Are you in CA?

[@evangelistaalbertomercedes7905]

Nice, each pack brings 50 pieces. How many pieces you think I need to cover 460 square feet?

[@three90blue77]

460/50=9.2

[@scottmccauley1701]

How isitdriving a vehicle on top. Like when you turn the wheels

[@oneboltzfan]

Doesn't the transition create a dam, so water has nowhere to run out of the garage?

[@Carlos.Rivera]

Currently unavailable in amazon 🤷‍♂️

[@ReloadingRADIO]

Hell yeah. I like it

[@M3_86]

Hows the water going to drain past the rubber edge

[@imjoshv]

Yea if you are washing on top of it I would t recommend using that edge. I have a wash bay outside so it doesn’t get very wet inside for me. Any water that does get in just evaporates out

[@mikecondray773]

Looks like they don’t sell the drainage tiles anymore they changed them to soft pvc they only sell solid with no drainage now for garage flooring

[@xMavsManx]

Same I'm looking for these ones and cannot find. They have the solid interlocking pcs but not the drainage ones like used here.

[@fezzle81]

I ended up following your links in the description to the products and ordered it but it ended up being a rubber floor tile and not the ones you show with the round loops and what looks like a hard plastic tile. I hope these work it in the garage for me but now I'm concerned it's not the correct type.

[@imjoshv]

Oh man they must have changed the listing.. thanks for letting me know, I’ll check it out

[@timkountz3512]

I just followed the same links and noticed the same issue. I saw the connectors are different now, did you buy these and did they work? Looks like they have a V connector now instead of the loops.

[@johnwarner5666]

Connectors are different but really difference is lack of the checkered look when light hits it. Looks like the changed product. Just got mine today and not sure I'll keep or not.

[@KnockTsuKow]

Bro your vevor floor links wrong, i ordered 10 boxes all got shipped wrong today… sigh.

[@imjoshv]

I just checked and it looks like they changed the listing… I’m looking on their site but I don’t see them in there either

[@jshoro0]

@imjoshv @knocktsukow I also received the tiles but they look to be rubber :/ trying to figure out what to do

[@KnockTsuKow]

@@jshoro0 bro I just went thru hell returning it cuz its 10 boxes and cost me $350 since seller wont own it, still dealing it it w amazon now... brutal. Wish I didn't relied on this video link lol

[@brandonhvegas]

This is a random question that isn’t related to this video. What cordless da polishers do you use specifically? You mentioned you’ve used both Milwaukee and Dewalt. Which models do you like best? Thank you for your time and thanks for all the amazing videos.

[@JLamont_3PM]

I meant does the flooring come in other colors. Lol

[@craiggoldstein2461]

I get that you can use a shopvac to vacuum up dust/debris etc....what about Liquids like oil, coolant etc.....Seems like that is a problem with these grated type floors.....How are they with Jacks and Jack stands?

[@imjoshv]

Yea not great fro those things.. I discuss that in one of my earlier videos about these. I think the real reason to lay these down is purely for looks and thats why i recommend the cheaper VEVOR tiles and not the mor expensive name brand ones... Those are a better quality flooring for sure, but still have the same issues when it comes to those things you brought up

[@CaliforniaCasey]

Niiiiiice

[@cscf3052]

Can you use a car jack on this?

[@seashackf1]

I don’t think you can. Would crush the plastic. I think you need something underneath the jack, like a piece of wood or metal.

[@therealjs19]

Yes I use it on mine now and have had it down for over a year with no issues

[@zoner__]

Lack of a matching edge piece is a deal killer

[@cica322]

I got the Big Tile edging to fit perfectly. I used a CNC machine and machined the bottom of the tiles. Fits like a glove.

[@Thedetailcartel]

The tiles are grey ?