Best Home Studio Mixer / Yamaha Mixer MG12XU Unboxing, Sound Test and Review

This is by far the best upgrade to my home studio audio recording set up, look no further. It has all the options you would ever need in a mixer, including Amazing powerful and quite pre-amps, built in compression, ZERO noise usb connectivity to your PC or Mac, a bundled pro audio editing suite, on board FXs and oh, it just looks pretty has heck. Do yourself a favor, pick the Yamaha MG12XU or the MG10XU. You will not regret it.
********************************************************************
Support Lo Knows on Patreon and a chance to win free gear!!
/ loknows
Featured Gear in this Video:
Yahaha MG12XU: amzn.to/2y0eWEM
AT4040: amzn.to/2z3qg3c
Headphones ATH-M50x: amzn.to/2ghY0lD
If you like the gear im using go ahead and get it here. You'll be helping out the channel a lot! Thanks
Collection of all the Gear I use for the Channel
KZbin Camera: amzn.to/2yuJDFc
Vlogging Microphone: amzn.to/2y4GkmU
Dead cat: amzn.to/2ghBtpi
My Main Audio Recorder: amzn.to/2y5cpLh
Shotgun Microphone: amzn.to/2ghr2SC
Drone 1: amzn.to/2z4srUo
Drone 2: amzn.to/2ghNNFZ
My Favorite WebCam: amzn.to/2y54EVH
My Previous Favorite Webcam (Huge Discount):
amzn.to/2y4ODyZ
Best Home Mixer (with bonus stuff):amzn.to/2z3wlgh
Join the Community:
FaceBook: / loknowssortof
Twitter: / loknowssortof
Instagram: / lo_knows_sort_of

[@LoKnows]

I am seriously loving this mixer. I feel so confident knowing im going to sound great with very little noise in my signal. Tell me what you are using or if you have this mixer give a shout out!

[@ThamilNesan]

I am having Yamaha MG 12XU USB version with Yamaha PSR S950 and Shure mic for recording gospel song with CUBE BASE LE 9 and I am trying to use the software to record it where I am struggling a bit to do recording, if you can do the demo recording show with your Yamaha Mixer that how to use Cube Base for recording that will be so helpful Thank you God bless you Anton

[@BretGashDJBFG]

Lo Knows, Sort Of I use the YAMAHA MG10XU love it it is so simple to use and the sou d quality is amazing.

[@TheTechWhiz]

Can you output the main audio from both the XLR and TRS jacks?

[@LoKnows]

There is an XLR out in the top right corner for speakers or output if you like

[@TheHomeloanking]

Lo Knows, Sort Of bro, how does guitar rig or amplitude sound through it.. I'm trying to find a mixer with no noise using guitar vsts.

[@ForeGoneProduction]

I'd like to point out, that the "ST"-Button is for "Stereo". That means, that the line, on which the ST-button has been pressed, routes to the regular "Stereo Out". The "1-2"-button is for putting the signal on that line to the "Group 1-2" line out. Please make sure you read the manual before you review it. :) It even says so (also it's color coded...)

[@LoKnows]

ForeGoneProduction thanks man appreciate it. I missed that the first time around when I first go it. Honest mistake.

[@ForeGoneProduction]

Though, nice little review there. :) Thanks!

[@mksteezy]

If i use the USB out, does that apply to the Group 1-2 also? or just the Stereo mix?

[@joshuaanarfi7786]

same I was gonna also point that out

[@AdventSeph]

Hey, real quick, can you route the same line to both the ST and 1-2 outputs at the same time? (i.e. would it be possible to run mic audio to both at the same time?)

[@edrock26]

This is the best video about this mixer series! I have learned more from your 15 minute video than I have in the last 15+ years of owning these mixers. Thank You!!!

[@bearpitrock]

Thanks for the video. Most mixers like this only do 2 channels in and 2 channels out via USB. It's a limitation of the mixer.

[@Deraco1]

Other than the ST button which was already answered on what it is. There is also a 1-2 button. This assignment button routes the channel to the fader to the left of master. Which should also be laleled 1-2. This is called a sub master. Sort of "Grouping" So you can group multipule inputs into one fader without taking the master fader down.. The submaster also has a stereo asignment button which would of course route the submaster to the master output fader Hope this helps Great video! PS. Dont leave ST and 1-2 assignment buttons engaged at the sametime on one channel, it will essentially double the volume going to the outputs

[@LoKnows]

Deraco1 dude thank you so much for the explanation

[@mksteezy]

If i use the USB out, does that apply to the Group 1-2 also? or just the Stereo mix?

[@jessedyer568]

Hey, dude! Thanks for the going over the setup for installation and the interface. That was unbelievably helpful! You killed it

[@lovesafrica111]

You did a GREAT job on this video!!! I literally knew NOTHING about mixers, but after sitting for the last 2 hours & taking notes on literally everything you said, I now have a clear picture of how all the potentiometers (knobs) work & feel comfortable purchasing this product for my husband. Thanks very much. Kerrie

[@Shaker4x4]

Just bought this model MG12XU. The centrepiece of a children's band as they grow up being educated with familiar and reliable gear. Will use Apple Garage Band / audio via the mixer's USB, Rode M2 x 2 and M5 x 2 microphones plus keyboard, electric-acoustic guitar, recorders and purcussion instruments. Already using nine channels just with that, with room to expand.

[@Millennial_Mike]

I use the exact same Behringer mixer for live solo acpustic gigs. I absolutely love it. Originally bought it thinking I'll upgrade... 2 years later still amazing. I'm interested in this Yamaha... but only if it features the samne kind of delay / reverb effects

[@norcalrio1788]

I clicked your video to find out what this mixer thing actually does, because I was totally clueless. By the time I was done with your video I wanted to buy one, not sure what for, but I wanted to own one none the less. Great video, thanks for taking the time to show what this magical thing can really do.

[@myxponce8347]

Just watching you makes me want to run to the store already, currently scouting a mixer for podcasting. Thanks for this review man.. Love it!

[@LoKnows]

I know the feeling, man! I hope you find the one you are looking for

[@beedslolkuntus2070]

Can this mixer work for PA system

[@gabrielbusnot4488]

A one knob compression actually doesn't "raise the low volumes". It is more accurate to say that it lowers the higher ones and then raises the whole compressed signal to make it the same than before compression, on average. The original goal of a compressor is not that much to allow you to speak far from the mic, even if it can be used that way in the end. But nice review :)

[@davidtrevi2914]

Excellent review. Not only did you unbox but you explained the controls. Makes a "quick start" efficient to get up and running. Kudos!

[@peterrief01]

Thanks for the video ! I bought the very same Yamaha mixer a couple of years ago as a backup to my VERY old Yamaha mixer....so the new one got very little use. However...your excellent video answered lots of questions that I had so I am eager to try working with this board again.

[@JG6869USA1]

No matter how many inputs you have going into the mixer, they will all come out as 2 tracks into your computer DAW software. Those tracks will be in time with each other. If you record those 2 tracks, then record another track on top of that, you will have latency. The 3rd track will need to be edited in your DAW and moved to sync up to the first 2 tracks.

[@jeromemckenna7102]

I'm thinking of buying the next model down and this is so similar that you've answered most of my questions.

[@LoKnows]

Jerome Mc Kenna awesome, glad I could help

[@manodeejay2547]

Please ..we have de same mixer ,but i have no ideea how can i use them to record . I also have an Cubase Ai . Can you respond me ?

[@louprimo6062]

The mixer has two outputs ST and 1/2. The bottoms allow you to put let’s say all the vocals in ST so now the ST fader controller all the vocal channels then put all the other inputs in 1-2 and volume fader 1-2 will control all those other inputs. So now have separate volume control for vocals and for everything else. Lower the ST fader will lower all the mics together. Lower the 1-2 fader and it will lower very thing else but the vocals. Used more for live performances and blending. Hope that helps. Great mixer.

[@KnockSquared]

When he said "ST" stands for "Stand by or Safe Safe" I almost clicked off the video..lol. He saved it with the whole review being great though. SUBBED !

[@nefdsnet]

Same... a room full of audio tools and no basics. Also the expectation of separate USB channels for a stereo in/out device.

[@riesefelix658]

st stands for stereo, so that you wand to send that input to the stereo output or mix

[@mgtow-extraits]

it’s nice that you showed the noise floor. i wish you did that without anything on and with the audacity meter showing down even more so we can get an actual number out of it.

[@LoKnows]

the noise floor is really quite, i was surprised that the meter didn't even bounce for me when i wasn't talking

[@mgtow-extraits]

Lo Knows, Sort Of > in audacity default meter is at -60db, you have to go in preferences and set it for at least -92db: that’s when noise floor will start to show. « quiet » is subjective, but showing us the actual self-noise number is objective result that can be compared to other gear.

[@katalinamafi1849]

Thank you for sharing this, its helped me learn how to use my mixer properly. I like that you not only talk about it but you demonstrate it.

[@OnlineMD]

Am writing this comment June 2020. This mixer has USB out, and umpteen inputs. However, when you connect to a computer, you will be DISMAYED when you find that you only get either 2 mono tracks or ONE stereo track on your computer. Look at the specs on this PDF right from Yamaha, below. The state of the art now IS NOT A MIXER LIKE THIS ONE. It is so wonderful to have at least 4 input tracks on your computer, and be sure to get those specifications. Last month I got a Mackie mixer, ProFX6V3. 6 inputs, but only two tracks on to the computer. Very nice mixer, great mic preamps. So to record karaoke, I have to record one stereo track on to the computer, then create a second track, and record my vocals on that track. Whereas with a USB 4 input 4 output interface like a Scarlett 4i4 or Motu M4, I can record 2 people singing, plus two more inputs for either ONE STEREO recording or two instruments like drums or guitar. Here's Yamaha's specs: Only 2 tracks in and 2 out on USB: By the way, what's the use of USB outs? Glad you asked! It is for real live auditioning of what exactly is being recorded on the computer! It is just awesome! USB is going in, and instantaneously from the USB out, you listen with your headphones or monitor. usa.yamaha.com/files/download/other_assets/7/330987/mg12xu_en_ts_e0.pdf

[@mlabuguen]

Thank you for this video! I have been considering this mixer for awhile and doring my research. So far this has been the most helpful video for me!

[@thewatcher611]

#1, you were using an "old" Behringer...they had terrible preamps back then. Yamaha does pretty well in clean, high headroom. #2, "ST" button is to send this channel to the "STEREO" mix. the 1-2 Button will send the channel to the "GROUP 1-2".... gives you some options for recording/live mixing options. Maybe you are playing something you don't want to really record, like a backing track.... for live mixing, same thing, you can send a couple channels to the "Group" fader, and just control them live with that, say all the vocals, or all the instruments. #3...I'm really glad you played with the gain, EQ, and compression, and used that recording on KZbin, great job! I think Yamaha does really well with the single knob compressor. Thanks, good review!

[@LoKnows]

Dude, thanks for the info!!! I will put this practice

[@AustinTexas6thStreet]

I started building my new studio not long ago and needed/wanted a board. I came REALLY close to buying one of these Yamaha mixers....they are supposedly quite decent for their price class. It was between a Yamaha MG12xu, a 12-channel Presonus StudioLive, or a Soundcraft mtk12. Was gonna go for an Allen & Heath, but sadly it didn't do what I needed. While the Yamaha does record to daw via usb, it Only allows you to record/playback a 2-channel stereo track.... the Presonus I believe actually does allow you to record/playback multitracks or just a 2-track stereo track to onboard SD card. None of them allowed multitrack recording/playback/overdub etc....except the Soundcraft!! I LOVE the Soundcraft and there is NOT one single mixer in its class or price range that can compete!!! If you want a board of good quality that allows multitrack recording to your daw, get a Soundcraft!!

[@chrissullivan1673]

This series of mixers, and many similar mixers by other manufactures, only do stereo out through the USB. It's not a function of the DAW software or the driver. You really have to get into much more expensive USB or Firewire mixers to support more than two channels. I have the 16 channel version of this mixer, and there is also a 20 channel version. None of them support more than two channels. That's simply how they are built. Also, the sound is attenuated before going to the A/D converter for USB output. Meaning, it's a quieter signal than what you would get via your basic analog stereo outs. According to a Yamaha support engineer, who I talked to on the phone, he said this is done on purpose, so the signal does not clip going into your DAW. Yours has routing to one group out (1-2), and the master stereo channel (ST). Mine has two group outs (1-2 and 3-4), and 4 aux sends (3 plus the effects send.) I'm exploring the idea of using some of these outputs sort of like direct outs (the ideal kind of output to go to a multi-channel interface, imo.) But that means I loose a few aux outs, which I want to use for mix-minuses for things like Skype calls. While I can't manage as many "direct outs" as I would like, I can probably get a few to work. I haven't done this yet, as I only have a 2 channel interface (Focusrite 2i4) for my PC. My future plans are a mixer with 8 actual direct outs, and an interface with that many inputs. Six will probably be enough for most uses, so I'll have a few to spare. (My future setup would then handle 4 in-studio mics, a stereo input for sound clips and music, and several more inputs sent back out aux sends, as well as the direct outs, for Skype or phone calls.) While I would like to have that future setup now, I'm going to make this work with what I have. I originally did not want to do mult-track recording and a lot of post production. I was basically planning on going "live to drive." Now I'm leaning more toward multi-tracking at this point, at least for certain purposes. I'm not doing music recording, just podcasting. But eventually I want to have a setup for music recording as well, so I think I'll make good use of those future investments. Btw, I enjoy your videos. I just started watching recently. Thanks for making them!

[@chrissullivan1673]

Or, I may go all out and get a higher end mixer that will send multiple tracks out digitally. That would most likely be an all digital mixer. But I really like analog mixers, so the configuration I described above is still my preference. I will have to see when the time comes.

[@LoKnows]

Awesome info man, thanks! Whats really disappointing is that my zoom H6 can record 4 tracks individually but this cant, but like you said, its just the way they are made. Either way, im still loving it. Thanks for the info Chris!

[@LoKnows]

If you find one, please share

[@chrissullivan1673]

You're welcome! Will do. I'm keeping my eye out for either a Soundcraft Spirit FX16 (not being made, will have to buy a good used one), or a Presonus Studiolive AR16 (hybrid). A few others are also possibilities. I'll share when I do get it figured out. I do love my Yamaha. It's my second one. And, like another posted mentioned earlier, the black and blue looks good. Sharpest piece of gear I have. And I think it sounds great!

[@chrissullivan1673]

You're welcome!

[@andrewreynolds2647]

Hi Bud, your mixer may be two channel only i.e. 2 in and 2 out, i have just bought the allen and heath zed i 10 fx which is 4 in and 4 out via usb, this is a killer mixer and will only use their stuff now as it sounds great, i love yamaha but i think that over the years they have not kept up overall in the mixer market the mg12 xu you are using is a great mixer and a great sound but i believe it to be only a 2 in 2 out interface via usb.

[@scourneene]

Hey, I'm looking for a home studio mixer/interface combo and one that sends out 4 or more separate tracks via USB to my DAW while retaining my EQ, gain levels set on the mixer. So the mixer you mentioned does that? Thx

[@RonnKilby]

As I watch, this video is 6 years old. I am assuming you know a lot more now than you did when you made it. I think it may behoove you to read the manual BEFORE you make the video. Just a tip. Things like, "this ST button is for standby..." - I had to laugh. Thanks for taking the time and helping folks.

[@joelonsdale]

I would say that this is primarily a live mixing desk, for mixing a live band, or more likely, for the live band to mix themselves. A Podcaster or home music maker doesn't really need so much functionality and it just adds up to 'too complex' as the reviewer notices when just trying to get sound out! Things like the ST button or the mute button on the main stereo out fader - perfect for a band, but just another layer of complexity for a podcaster or home music maker. It's a stereo-out only USB interface meaning that once you have mixed your bands levels, you can hit record and capture a stereo recording of the entire thing. It won't give you separate outputs for each microphone as it only has 2 analogue to digital converters inside - one for the left channel and one for the right. Nothing to do with the software and, frankly, not a massively useful feature. A live desk mix of a band is rarely much more than a curiosity as it isn't balanced for recording, only for the live performance. A Podcaster probably just needs an audio interface with a couple of microphone inputs. You can do compression and FX in the recording software (even Audacity) much more effectively and safely. Fun review, but no real understanding of how and why the desk works and I get the distinct impression that the reviewer only really needs a simple £200 audio interface, not a £600 mixing desk.

[@andrewreynolds2647]

The on off switches are really a great idea for live and studio recording, you don't have to hunt around for a mute especially when using multiple mic inputs. the issue on recording four inputs i believe is a fault of the software try reaper you will be surprised. great vid i thoroughly enjoyed this.

[@SasamiRari]

Andrew Reynolds got a full name on the reaper software? I also have this mixer and would love to make full use of it.

[@andrewreynolds2647]

Hi Bud, the one to get is the reaper latest version which is version 5.974 last updated on april 6th check the version you need i.e. mac, windows or linux. This daw is so easy to install and great to use very intuitive and with many drop down menus to help you out, all versions of reaper are complete and fully functioning and come with a ton of vsts, i will never go back to pro tools or any of the other overly expensive corporatist offerings all i want is a good sound flexibility and adaptability reaper has all this, the reaper team let you evaluate it and if you love just pay them $60.00 and then you can register your version with them, even if you are not registered you can update to the newest one free with no hassle , the download is automatic and it keeps all your work flow vsts media intact just like the version you had before. it is superb, hope you enjoy it as much as i do. cheers. Andy. Scotland.

[@sungyulkim]

It is 2track usb audio interface which means only limited two tracks are simulteously recordable to work with computer software. Not the limitation of the software.

[@chrisstrobel3439]

Old school USA built Mackie CR-1604’s here .. two of em. Back when I got my first in 1992, big studios here in Los Angeles would use them to sub mix keyboards into big Neve and SSL consoles, they were used quite a bit by TV guys, as well as film composers. You can pick em up cheap nowadays on Reverb or eBay .. but they were pretty inexpensive new back in the day as well.

[@gregwilliams2764]

I have a Roland drum module. Where do I plug that in the board?

[@timothystubs4629]

I use this mixer and the USB out is only recording the STereo mains left & right. Not Mic 1&2. I know that there is no info on if it does multitrack recording which means all inputs and STereo mains left and right can be recorded on individual channels in the DAW (recording software) at the same time. ST means stereo.

[@EricRyanSound]

The reason the MG is so great for home studios (Logic Pro X) and Streaming is it gives you multiple inputs, built-in live effects, on board compressor, on board pre-amp, and precise dialing in. I can be used for streaming, recording and LIVE!

[@guitarguts666]

I want to know how to set it up to record and audacity without getting feedback because I constantly get a feedback loop and I don't know if I'm doing it wrong

[@razattimusic]

I ordered one for my music productions. Thanks for the quick overview!

[@LoKnows]

That’s awesome. I’m in the middle of a, how is it holding up 2 years later, video. I love this mixer.

[@boutiqueimagery4461]

The sound with the mixer sounds great

[@bjmckinney3049]

Man,love my mx12.Best mixer I've ever owned.

[@TransplantHelper]

You sound so much better. Nice mixer

[@LoKnows]

Thanks Jim, i am honestly excited for this mixer, it fixed soooooo many issues i was having with my old gear. I cant wait to connect all my other stuff to it to see what improvements it makes

[@madhurjyamahanta]

When I am going to record audio , the sound or volume level is very low, I increase gain level, fader up to 0 and USB line switch also keep on..Plz sir tell me how can I create better loud sound while recording audio

[@chitrapuvijaya4727]

Can we assign one EQ to channel-1 and another EQ to channel-2 different EQ's to different channels Can we do ?

[@francescopasin1928]

st means stereo. If you press it that channel is sent to the stereo(buttons 1-2 and 3-4 work the same but for groups

[@MACODJ]

Thank you so much! Very good mixer for Mac too

[@madness8556]

From what I understand, this mixer, like most cheaper to mid range mixers has a 2x2 usb interface. Therefore, you'll only have a stereo mix output and 2 inputs which can be recorded at once? I do stand corrected?

[@ericmartens8064]

First and foremost I want to say that I'm a big fan of your channel. I've recently purchased this mixer to get into podcasting, possibly voice over and was hoping to see you do a video on your setup. How your channels are setup, how you set your levels, if you have a mix-minus configured for Skype or other calls also any explanation for and use of the PFL's.

[@ElishaHobbs]

read the manual.

[@izziOnBass]

I bought Behringer 2222FX mixer. Realized that the LED bulp voltage signal is captured by the main mix out. When the LEDs are blinking (levels) I could hear some clicks. I returned the mixer to the agent and we checked in more advance versions of Behringer, and found the same defect. Simply the LED voltage is leaking to the audio signal processing board. Then I went for Soundcraft. I lost my trust on Behringer even though I have quite a bit of Behringer equipment (MDX 4600, Ultragain 100, DI20 box, UMC 404 sound card)

[@musicfrommicksroom]

I have the MG10XU (I also use those same FOSTEX monitors) and I have issues using it to record music. There is a latency that you don't really notice until you're recording to a click track. It's really annoying! Also, if you're recording and press the "To Mon" button to send the output to the monitors, it will also mix the audio output into the input that you are recording on... and feed back! Also, the fact that it is a 2x2 I/O is a limitation of the mixer. I've stopped using mine to record music.

[@LoKnows]

wow, thanks for the heads and feedback, that is definetly something to keep in mind, in case i run into problems like that in the future. Do you think it being a MG10XU may anything to do with it, i know it shouldnt, but still

[@mosesk3069]

Every setup I’ve used had latency, I can only speak for audacity but there is a setting to fix it, watch on youtube

[@dimitriweemhof]

I know i'm watching this late... But if you still have the protective film on the back of your monitor, Please remove it for the heat.

[@LoKnows]

Oh snap! Your right, thanks!!

[@bhargavjamvecha9818]

hi there. I have 2 questions regarding this mixer...MY 1st question is does it records all the channel separately, I mean all 10 or 12 channel individually in DAW and 2nd question is does onboard effects works in recording or just for analog output?? for example ,if I have selected one of reverb and put it on 1st channel mic, does the software record the mic with effects or without effects over usb??

[@scourneene]

Did you find the answer to your questions? If so what mixer/interface did you go with? Thanks

[@bhargavjamvecha9818]

@@scourneene not yet bro. still their answer has not come out.

[@larrycom]

ST means Stereo buss output which corresponds to the right side fader

[@LoKnows]

Thanks man!

[@ridimoheneba3168]

I am a novice and I still don't get the process... Which cable is used to connect it to the computer?

[@LoKnows]

It’s super simple. You use the USB cord that connects from the mixer to the PC. Whatever you connect to the mixer will now go to your PC. Easy!

[@dancassidy7471]

You are real earthy in a greatvway man..thanks so much .I have a Bose TS 8 but this Yamaha is much easier to use hmmm??

[@benjah3745]

wow i like this mixer you have clearly explained

[@LoKnows]

benjah it sounds great. Often sounding better or just as good as some expensive mic preamps. I’m loving it. R

[@btvcast]

Just got the analog one for myself switching from beringher. Fun vid man. Subbed.

[@Elmate_delp]

Bro u rock. I was looking for this exact comparison my man

[@boutiqueimagery4461]

The Yamaha and AT4040 sounds great and with the compression on board I don't think you need anything else. Don't need the the Avalon from what I hear!

[@LoKnows]

I know right!!! Sort of makes me happy and sad at the same time

[@nesmaessam3909]

Thanks bro ,good luck

[@reggiesaidit513]

Thanks for the information, I didn’t realize that you could record 4 channels at the same time

[@Trevscuriosites]

often the software that comes with mixers / audio interfaces are the light versions of the software so they limit the amount of tracks you can record to if you had the full version you would be able to do multi track recording at least thats what I think

[@astasuleo]

how is this possible? why should they do that?

[@AlessandroPetrocino]

So, If I got this right... If I connect this MG12XU into my MacBook Pro USB port, and open Logic Pro X... Logic will identify it as a Audio Interface, and EACH channel of it can be recorded individually into Logic?? Parallel, all channels at same time??

[@ADDLOOPS1]

Great review, did you ever figure out how to get more than two tracks in the daw?

[@emmanueljohn5781]

I was waiting to listen to some very much useful thingsand you got me onethank you 😊

[@mark-ze4en]

Great looking mixer. I am curious about your running a signal from your Interface(protools?) back to the mixer. Is that necessary to hear playback? Other reason and ,, which input in the mixer did you run back into.? Thanks

[@normancastelli3546]

This is the best video of explanation. Audio and all. Can I ask - How do you have this connected to the PC so that you can record multiple channels. By USB or Whatever???? Im using Mixcraft 8 as the DAW.

[@cbsmusic2745]

If we can only 2 channel record at the same time, why are there 12 channels on the mixer? Onyl for stage performances?

[@josephcanchola4435]

Thank you so much for the helpful video , very informative. Excellant instruction and information on the yamaha mixer .JJ

[@RubyRedDTillyLiQuiDiamOnZ]

Best review yet‼Thankyou 👌

[@venumadhava9514]

I think ST button is for routing through stereo output channel.

[@user-yc3pt3om1d]

Hi sir! struggling between MG16XU to this MG12XU.. are you still using this mixer right now? if not what did you replace?

[@DragonboltBlastter]

How do I connect an external rack to this mixer?

[@finn.hermansen]

One more helpful video. Thanks LO

[@ChloeCanary]

Those little birds LOL I died. Awesome & thorough review! I think I'll buy this soon :)

[@LoKnows]

Thanks, im loving mine

[@remeshreji848]

Once again thanking u. I am eagerly waiting for that video.

[@voicetube]

I have a question regarding speaker feedback from my voiceover microphone: I purchased the MG 10XU and was able to hook up my powered monitors (which workfine either using the monitor outs or the stereo outs equally well). The audio coming in from the computer through the USB was flawless. The issue I have is feedback through the speakers when trying to record. My former mixer (another USB mixer made by Alesis) has a feature called "Auxiliary Sends" which allows me to keep the main microphone level knob down to zero and I use the AUX SEND knob to feed a line output to my computer (unfortunately the USB [OUTPUT] on this mixer doesn't work no matter what I do). So, with the Alesis using the Aux Send, I can record even at a high gain with no feedback whatsoever through the speakers... and then, I can immediately play back anything and without having to press any buttons or turning knobs (yet, with playback, everything coming through the speakers, gloriously. (If I try turning up the level knob in the lower left, I get of course the feedback, but with the Alesis, I can leave it at zero). Now, with the Yamaha, there are no Aux Sends anywhere on the board - is this why I am not able to record without the feedback (unless I mute the audio out every time)? In any event, I got the Alesis hobbling along again and the sound is decent, so I'm living with that (the downside being I am running analog and using the soundcard, rather than using USB interface which is what I wanted to do with the Yamaha). The reason I'm reaching out with this comment is, I'm wondering if there is a workaround to mute those speaker outputs while not having to adjust anything every time I go to record (which is very often as a voiceover artist doing auditions all day long). Or is this mixer just not designed that way? Thanks in advance!

[@didssoundofficial]

I am using logic pro x..should i install yamaha mg xu driver...?

[@OgDj2024]

Great review! 👍🏾 WOW, it came with 4 XLR cables!? What kind of bundle is that? Also, that kind of sucks it doesn’t come with a USB cable. 🤨 Question? I have a Yamaha MG 166cx. For some reason, when I plug microphones in, they are always on. And it doesn’t matter if I push the on off button, the microphone stays on. But, I can turn the sound off with the PFL button. Also, the faders don’t turn the volume up or down, I can only control the volume with the master. Do you know what this means? 🤔

[@RonaldoFabian]

nice very helpful and very clear explanation

[@ThamilNesan]

Brother very nice demonstration I have same one bought it in Auguest but doesn't come with USB cable or XLR cables in Canada. Also can you do another video possible that how to configure USB connected with computers with the sound card and do the recording with Cubase AI. I am trying to record live music keyboard one man band recording for You Tube. I am trying and having difficulties because I am in the learning stage.thank you

[@oysteinsoreide4323]

it is documented clearly that it's only two channels in and two channels out for USB. You must get a more digital oriented mixer to get many channels in and out.

[@ArtisBright]

does it work without an external sound card? does it work if we connect this mixer to computer directly?

[@TerminatorSAW2k]

Best MG12XU Video on YT, thanks.

[@NIP28]

Theres this thing about routing a reverb to another channel and not directly to the voice channel... how can it be done there

[@k.korkos-heavenlypraiselif1863]

Seems like a really good mixer.. almost ready to get it.. but would like to record onto a small zoom8 since the old Cubase I have still works but takes time to learn ..any suggestions? I know some people record their mix onto a recorder.. wondering if the quality would be compromised ..thanks in advance for redd st ponding..

[@LoKnows]

In the end it’s really up to YOUR needs. I have a zoom H6, so I trust the preamps within the device. I also love the preamps in the Yamaha but both take care of 2 different needs.

[@NixonStudios]

Hi ,ive bought the MG16XU and i am trying to get a clean signal for recording vocals in cubase.Can you help me by telling me how to wire it up please x

[@mtso1122]

Thanks for the video. Are you able to record in multi channels? Thanks again

[@beaulieumedia8767]

Thank you for the review, I purchase this unit for a podcast project 6 month ago but have not used it yet , also if possible ZOOM just came out with a L12, look more compact whats you opinion on that , but I like the look of the YAMAHA and there reputation as solid sound equipment , thanks, very good info.

[@LoKnows]

Wow the zoom looks killer, if you can record each of the mic inputs separately and independently, then im sold

[@paulotonedef]

I get that same noise from my behringer.. I guess that means it is stuffed, huh? I thought it was dirty power, but it's exactly that sound, along with a swooshing sort of sound.

[@LoKnows]

yeah for sure, that sound was driving me crazy. Constantly rearranging wires so there was no interference, buying hum and noise reducers, it was a nightmare.

[@paulotonedef]

Lo Knows, Sort Of I talked to my Dad about it.. He is an audio genius who can build his own mixer.. He has recorded Sammy Davis Jr, Julian Lennon and many more.. I sent him your vid and he said it was a dried up capacitor.. and the channel not working is a dry solder ..Yay, gotta buy a new mixer...

[@TheBabypod]

I don't understand what the computer/USB connection is used for. What would you be getting through the computer? I figured you plug in your microphones and instruments into the mixer and then just do the XLR cable out to my powered speaker. What use the computer for? Thanks, I'm a neophyte on this stuff. I got this mixer on order to hook up to two Harbinger Vari 2212 powered speakers i just ordered. I intend you use for me and my wife to do little duo gigs at nursing homes/55+ communities, and such.

[@GeorgiRusev]

How many keyboards/synthesizers can you connect to the MG12XU?

[@c.s.venkatachalam8346]

Can you please tell me how to connect the mixer audio output to the laptop using a USB port on the mixer. Is it possible to feed the mixed audio from the mixer to the laptop using a USB Cable ? If so, how to do it ?

[@lovesafrica111]

Lo Knows, please forgive this question, if it's redundant, but this is a brand new world for me & I thought I understood until I began reading the comments below. My husband needs to be able to record songs from his djembe, his mbira & congas, as well as singing & then be able to mix them together, in addition to using the effects, and now it seems the Yamaha MG 12XU, is not the right equipment for this. Can you please confirm? I'm thinking we will need something like the Focusright Scarlett 18i20 (2nd gen) USB Audio Interface with Pro Tools mentioned below? Also, please recommend a mic as well? Thanks very much & I really loved your video...Maybe you could make one for the Focusright as well? Best. Kerrie

[@bendass7113]

Let me know how to do multitrack recording using this mixer. Is that possible ?

[@user-zp1ct9po6z]

ты микшер к компьютеру напрямую подключил через usb или через звуковую карту?

[@anhedonia0]

Not being able to use the mixer tracks separately in the DAW it a huge letdown. Meaning you cant use DAW effects like amp sims and what not.

[@BrianMackey2010]

Dont feel too Bad, it took me two hours to get the phone patch setup, 1 knob off, yep one lousy knob lol thanks for the review

[@Darksagan]

Alistair Overeem's lil brother. Cool video.

[@techstyles758]

I am thinking about replacing my alto Alto ZMX862 with this or Mackie ProFX12v3. How is the mixer as a sound card?

[@jclark521]

Please help: In Cubase 9.5, I have four instrument tracks. I then add a new audio track to record a vocal. I select the monitor and record-enable buttons in the audio track, hit "record". Instead of just hearing my vocal recording now, all of my instruments have been recorded into my vocal track. How do I fix this?