Helpful video, especially regarding the magnet strength and charging time! I appreciate diving in and comparing different brands.
@jcook69camaro11 ай бұрын
you need to do the same test with a case on the phone.
@T3CHUP10 ай бұрын
Yes a case will play a significant role in offering better magnetic strength but I didnt perform these tests with a case on my iphone because I wanted to show how each charger performs with its strength and show the difference between the chargers.
@ColtonBlumhagen9 ай бұрын
Then you’d have to use the same case for all tests. So unless the viewer has that same case it would be meaningless.
@GanymedeXD5 ай бұрын
@@T3CHUPProblem is … do not know anybody using a bare phone without case. But that indeed alters outcome and pretty much most have different cases.
@T3CHUP5 ай бұрын
@@GanymedeXD yup, it sure does. I understand I totally get why people mentioned why I didn’t test it with a case cause everyone usually has a case on their iPhone. However, down the road when I drop another video on some newer car chargers I’ll probably use a iphone case with the standard strength you would find on most common iPhone brand cases out there. 👍
@jamison7411 ай бұрын
Great video but…Peak Design DOES offer a vent mount and it is so very good. Different from what I’ve seen before but very good just like the dash mount version. Made from solid billet machines aluminum and just feels like a quality piece of kit. Big plus is that it doesn’t block the vent flow.
@krypto360 Жыл бұрын
You definitely deserves more views likes and subs. Real genuine testing and most importantly accurate. I do a lot of off road lease road driving and was looking for something that would have a strong magnetic hold for those bumpy roads and you did a very good job breaking the magnetic strength down for those looking specifically for that thank you 🙏🏼
@T3CHUP Жыл бұрын
Thanks, glad you enjoyed the video!
@krypto360 Жыл бұрын
@@T3CHUP quick question would you happen to know what size ball mount fits the ESR cryoboost 7.5? I drive a semi truck with a big dash and would like some type of adhesive connector instead of the vent mount.
@T3CHUP Жыл бұрын
@@krypto360 from the looks of it the ball size mount on the esr halolock charger is 17mm on ESRs website. Hope that helps!
@bbullzeye8 ай бұрын
@T3CHUP have you tried any CD mounts?
@Bman3005 Жыл бұрын
FYI Peak Design does offer a vent mount option as well.
@nxtiak11 ай бұрын
And also a generic 1" ball version that you can use your own mount.
@atlshawn2 ай бұрын
Solid review. Thanks
@jestephens4 ай бұрын
I've been using scosche magic mount for years, at the expense of not using the wireless charge feature of my phone(s). I would like to make a change. Thank you for doing this comparison for me! I haven't finished the video yet, but my first observation is that Scosche isn't in the list. They make this tech too I think - Maybe you'll address it. Thanks again
@brynzlo10 ай бұрын
Looks like ESR is the go for me. The summer heat here means my phone often shuts down if I try and charge it even with a cable so I need the cooling tech to be able to run my business on the go. Thanks for the review!
@VASIN_Vee9 ай бұрын
I have been using several of the XVIDA magnetic car and home chargers for about three [3] years now for our iPhone 12 Pro's. The entry costs for XVIDA were high and they required the use of their propriety phone cases. The magnetic hold was only fair and a light bump of the phone easily lands the phone at my feet or under the pedals out of reach [very annoying]. And now the wear and tear is showing on the USB connection on the chargers itself causing an intermittent connection. One of them simply won't stay connected even with a new USB cable. So now in the market to replace all the XVIDA chargers [4 home base chargers and 3 auto chargers]. Also means the 2 XVIDA phone cases have to go too. Your reviews are very helpful, but I like to use phone cases to help protect our investment in the iPhones. As we have no need to replace the 12 Pros we have now [at least for the immediate predictable future], I'm starting the research for compatible cases that will work with the chargers you've reviewed. It seems many of not all the cases have some sort of thought into maintaining or improving the magnetic hold [verses the XVIDA I have now]. Do you have any thoughts on how the cases affect the magnetic hold, and any recommendations on those? I'm not really too concerned about the wattage or charging times as most our vehicle journeys are at least 30 minutes or greater. I'd rather have better vent mounted phone, with the magnetic hold capacities with a compatible phone case. Thank you for your thoughts on this.
@Aftaer2 күн бұрын
I notice that the mobile phone has occupied us from our daily work😂
@leavii544924 күн бұрын
Think the link to the 7.5w esr charger isnt correct?
@WalterLash-z9m10 ай бұрын
Thank you, great review loved, the details.
@JGott00019 ай бұрын
Surprisingly helpful and fair review, thanks
@Kemenyan737 ай бұрын
My ESR Magsafe breaks at the clip after 9 months and it's irreparable .Sad as its magnet was strong , charging speed was good
@T3CHUP7 ай бұрын
Yeah the clips on the ESR charger and most of these car chargers can have the tendency to do that. However, if I were you I would reach out to ESR and try to see if they can help even after 9 months of using it and ask them if they could replace it. One of my friends had a similar issue with his an they were happy to help him out by sending him a replacement. They have a 12 month warranty last time I checked and their customer service is one of the best out there in the realm of iPhone accessories from what I’ve heard from people.
@Kemenyan737 ай бұрын
@@T3CHUP I've found a better solution. I bought a universal vent clip with 17mm ballhead for USD 1.5. and replaced the broken ESR clip. Stable like crazy. Seems better than the default ESR clip.
@tonybove24687 ай бұрын
Hey, my iPhone 12 Pro heats up BAD on a vent mount in the winter with the heat blowing on it. I need a CD slot mount with magsafe charging built-in, but can't find one. I don't want one w/out charging, and have to plug my phone in with a cable. That's the whole point of magsafe/fast charging. Any ideas? Thanks, Tony.
@drcdrdoct98647 ай бұрын
So you tested with just a bare phone? How about real world and at least put a protector on the phone?
@GanymedeXD5 ай бұрын
That leads to nonsense results. Hundreds of cases … everybody has different ones … hence bare phone the only representative choice.
@cybergrindinАй бұрын
@@GanymedeXDbarebones useless. Who carries a phone bare?
@dhopss9 ай бұрын
Very concise, thanks
@JarnoSuni13 ай бұрын
What is the small elongated white part of the 15W ESR charger for? 6:10 Is it supporting the attached device or does it have some other function?
@T3CHUP3 ай бұрын
It’s a supporting magnet for the magsafe design on most cases. Apple designed their magsafe on their phones and cases with a magnetic ring and then a lower magnet at the bottom. Most brands of iPhone cases offer that same design. 👍
@leasizeravat87638 ай бұрын
Suction Mounts are TRASH, and the Car-Vent mounts CAN and WILL break your Vent if you run over a pothole while the phone is charging. NOT worth the risk. 3M adhesive that are specific for car-mount are made for dash use and I have NEVER had one come off. I live in a VERY HOT place.
@GanymedeXD5 ай бұрын
I have … in 25 years … never had a mount damage my vents! And we got shitloads of potholes! Major downside … most were pretty flimsy and wobbly … at some point falling off. Suction sucks … but not on a dash. The adhesive ones do easily come off in the heat. The oldschool … brutally screwing them onto the dash … were the only stable ones. Not happy with😅😅 any!
@T3CHUP Жыл бұрын
Are you getting any of these magnetic/magsafe chargers?
@raine8496 Жыл бұрын
Not for $100 dollars
@GSMusikMix Жыл бұрын
esr mount are great keep my charge and cool but is so shaky. ESR customer service is great too i told them about my issue they sended me a replacement but it had same problem. I am only talking about 7.5w cryoboost charger.
@T3CHUP Жыл бұрын
Hmmm…I haven’t experienced that for their 15W car charger. Maybe with time that may happen to the 7.5W charger? 🤷♂️
@michaelwiley69799 ай бұрын
I have their desk charger with the watch and AirPods, and after a few months that fan starts to whine in the most annoying way
@T3CHUP9 ай бұрын
@@michaelwiley6979 haha not going to lie I agree! The first month I was able to stand it but a few months after I’ve started turning it off cause I got annoyed of it 😂
@hide2dan10 ай бұрын
How about iottie velox pro?
@GanymedeXD5 ай бұрын
Not included as you can see!
@dongraham58287 ай бұрын
Is the three in one mount brand spelled Qicoco? I can't find one.
@T3CHUP7 ай бұрын
Yup, that’s the one.
@panoseconomou6782 Жыл бұрын
What about iottie velox?
@GanymedeXD5 ай бұрын
You watched the clip … not included!
@TaekeunRim10 ай бұрын
ESR 15W is the BEST Charger
@savedfaves9 ай бұрын
The 15W third party iPhone wireless MagSafe and wireless non-MagSafe chargers only charge iPhones at 7.5W
@BezNurtu9 ай бұрын
Quad lock is the way guys!!!
@TrentWilbanks11 ай бұрын
Good video overall, however not enough detail shown about the three and one car charger and the video was way too dark to tell anything about it
@GanymedeXD5 ай бұрын
Dark? Check your hardware. Perfectly fine!
@TrentWilbanks5 ай бұрын
Hardware is perfectly fine as rest of video is perfectly fine, as well as every other video I’ve ever watched. The portion showing the 3-in-1 charger is too dark. 🤷♂️
@babeljeffu653511 ай бұрын
More cooler?
@GanymedeXD5 ай бұрын
Using full sentences helps communicating! What is that supposed to mean?
@BlackhatXII8 ай бұрын
ESR . Look no further
@Aftaer2 күн бұрын
🎉😊
@cybergrindinАй бұрын
USELESS WASTE OF TIME TESTS as NOBODY carries a bare phone. Nobody