Best Multi Welding Machines (MIG, TIG, Plasma cutter, MMA) | 2023

Best Multi Welding Machines (and plasma cutter) from my channel in 2022. You can watch longer detailed videos on my channel.
00:00 STAHLWERK CTM-250 ST
05:19 Decapower XTRAMIG 200 SYN
10:01 Jasic MIG 200 PFC
15:17 HITBOX SYN MIG 200 PRO
You can get these machines here:
STAHLWERK CTM-250 ST: www.stahlwerk-schweissgeraete...
Decapower XTRAMIG 200 SYN: decapower.cn/
Jasic MIG 200 PFC: www.jasictech.com/
HITBOX SYN MIG 200 PRO: unitweld.com/
Thank you for watching. Subscribe for more videos in 2023!

[@briangow6282]

Just completed the break-in period and so far the unit is operating perfectly kzbin.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y . I was amazed by just how quiet this little guy is. I kept having to walk down the driveway to the generator to make sure it was still running. In fact, the most annoying noise coming from the set-up is a high-pitched chirping coming from the pressure regulator on the propane line. I suppose it's possible my other propane-powered generator's pressure regulator is making the same noise, but the generator itself is so loud I've never noticed it. Build quality so far is excellent. My only nit is the service panel is a little tricky to remove. I feel like I might break off one of the plastic tabs when bending it back. I probably just need to work out the technique, so will not hold it against Champion.Next week I intend to fully load the unit to charge a large battery pack and will update this review if there's any problem (3000W continuous load vs a rated 3100W capacity while using propane). Absent any trouble there, I'm 100% pleased with this purchase.

[@michaelbamber4887]

Jasic are bloody good machines, I've a mma/tig inverter, best inverter I've used, really clean welding and auto arc force make it idiot proof.

[@JorgeHernandez-md2lj]

muy buenas maquinas me gustan

[@PabloVipVid]

Great video ! Thank you for sharing the different types and results. 'Well' done.👍 I'll have to watch it again to see what machine is my favorit.

[@josecarrico6272]

Qual é o preço desta máquina

[@IbrahimAli-ex3yb]

nn kk @

[@markusfalser269]

Super Video,DANKE

[@orivaldonizete]

nunca vi nada igual muito profissional

[@Edyard.]

Здравствуй Добрый день тебе хорошего дня береги себя не болей С наступающим тебя Новым годом Счастья вам здоровья Берегите себя

[@ofinamarciocoelhomoraes9432]

Máquina e top dimais

[@martinb.8681]

My experience is within a certain price range all these Chinese machines use many of the same components and have essentially the same performance. The difference mainly being different bells and whistles that different users may prefer. I had a Miller Sidekick for 30 years and it worked as good when I sold it as it did when new. It had to go because it was heavy. I've used both the YesWelder 205DS versions. These welders perform as good as the Sidekick with more capability and more fine tuning adjustment if you prefer. Or use the Synergic function that I've found to be pretty spot on as I weld different thicknesses when doing a single project. Adjust amperage and to the wire speed close of very close to spot on.

[@CoryHubbard]

Pretty sure the Stahlwerk Machine is manufactured in Germany and has been in business for nearly 25 years, or at least according to they information available on the their website... do you know of anyone having experiences with this company?

[@derJackistweg]

For sure it is like this! This welding business is a wholesale business and you get what you ordered. Here in GER e.g. is a seller who always goes for bigger negative clamps ans cables. BUT: There can be also a difference in software/firmware. And this can make a HUGE difference w/o a difference in manufacturer costs.

[@derJackistweg]

"Pretty sure the Stahlwerk Machine is manufactured in Germany " NO it is not! It is "designed in GER" - which just = to I want to order those welder in white color. This business is just 15km from my parents home town - they do just sales amd MKT over there. But they do very good MKT, as we can see on your comment. btw: I own a CT250 (or so). Wanted to start TIG, but gave up and thought I am too dumb. So I bought a PL MIG/MAG one. 1 year later I tried a TIG mashine from a friend and that worked nicely. Also the plasma cutter worked badly / hardly. On WIG vs. 3mm steel there was no welding under 160A (on 240V) So we can assume: DOA (=dead on arrival) These have 5 year warrenty to I have 3 left to bring it back. 2-times Plasma, 8 times WIG, 12 times MMA - 2 years in the shed. My 2ct.@@CoryHubbard

[@user-rg8fh8rx5h]

Интересно!!! 👌 👌 👌

[@hariyantodahlanblack5081]

great..

[@ghostridergr8259]

the thert one the mig sound is perfect

[@troonsclasic716]

I'll wait this video

[@crjr2013]

Stahlwerk the best at all

[@user-pe5yn7rf2m]

Top

[@user-dp3sp3qu2i]

Хороший обзор.

[@joseflaviodesanti1927]

Pergunta qual é o custo desta máquina 4x1

[@user-gv9qu9vl5z]

Классный агрегат.

[@Qanat-1985]

Ну Jasik с д.у пултом просто бомба Хочу сказать у меня 80 %оборудование от этого Бренда... 👍

[@sergegrenier2102]

STAHLWERK CTM-250 ST Bonjour es-ce que cette machine peut fonctionner en Amérique du nord?

[@gillettchambers]

Are those posted in order of preference?

[@pedrosilvadesouza4762]

Pedro Conto Vale.esa Impresora

[@cicerosantos1526]

Tem ela no mercado brasoleiro E qual o preço??

[@noqueask]

My comments were base in my inspection and 20 years fabricator experience

[@joaobimbim3460]

Macarico é Rey sempre será

[@Spud799]

Sthalwerks are not so bad😮

[@sabyrsabyr2605]

Ассалом алекум,каяктан сатып алсам болот мындай шумдук оокатты?Кыргызстанда барбы?

[@pier9020]

Buongiorno, posso chiederti cosa ne pensi della saldatrice stahlwerk mig 200 doppio impulso? Grazie

[@lyndonshaunhorrocks631]

Soz Newby 😂 ❤

[@user-wr9de2xh2h]

It is good weld machine. Available where,?.

[@iurii-wind]

Класс. 👏👍💪

[@sandeepkapoor8914]

Is it available in without Gas

[@sandeepkapoor8914]

Is it available in Punjab (India)

[@aelz9794]

...and the winner is Telwin of course best of the best, but also very expensive and good quality welding machine....

[@michaelbamber4887]

You should be talking and giving us the information about the machines and their settings, plus your observations as a welder on which you think is the best/ any down falls/ problems you experienced? This really shows us nothing other than they work in experienced hands.

[@aliakdemir1886]

Kaç para istanbuldan nereden alabilirim

[@MakeAndTest]

I make videos without any opinion. So you can make your own. These machines have similar and also different functions and settings. You should get a rough picture of what each machine is capable of. Some have big displays, remote control, plasma cutter, 4wheel wire feed... others have more weld setting parameters (pre, post flow, spot weld functions...). It depends on your needs, what will you choose.

[@MakeAndTest]

I make videos without any opinion. So you can make your own. These machines have similar and also different functions and settings. You should get a rough picture of what each machine is capable of. Some have big displays, remote control, plasma cutter, 4wheel wire feed... others have more weld setting parameters (pre, post flow, spot weld functions...). It depends on your needs, what will you choose.

[@ionturila8874]

Cât costă acest aparat cu 4 operații mulți functionale

[@jdsnhshsh1320]

Is perfect as is

[@yusheriman18s7]

Apakah mesin last ini sdh ada di Indonesia?

[@waltergarciaizquierdo5073]

Necesito saber cuanto me puede costar una de esa plantas 4 en 1 puesta en cuba

[@user-gy7td9gg1c]

👏✌️

[@jhoonrhee6034]

👏👏👏👍👍👍👋

[@lioncheetahforest1188]

Niec

[@josebeneditosantos6484]

Qual o valor dessa máquina?

[@sidneialgusto2007]

Boa noite , qual o valor dessa máquina?

[@carlosantoniodasilva1395]

Manda alguma coisa pra entrar em contato

[@throwaway692]

From what I've seen the Stahlwerk is not available in the US.

[@germantinizhanay4689]

Wen can fine this mashing

[@jamesmorgan6572]

Which one would you recommend as best "overall" , best "ease of use", and "best price-wise"? And, do you have an opinion on the Harbor freight brand welders?

[@MakeAndTest]

I am not from America, so I dont know what is in the harbour freight

[@darioeduardoarevalo9582]

Hola hoy cuato dinero cuesta esta que estas probando??

[@milciadeslaverde2648]

Ola me puedes decir que precio tiene un equipo de esos

[@WeiderMonteluis]

Quiero comprar habrá ése producto en Perú?

[@duchoi2023]

Cho mình xin giá tiền bao nhiêu vậy bạn

[@carlosantoniodasilva1395]

Qual endereço que eu posso comprar tem algum contato que eu posso ligar

[@user-wd4dw3ok2y]

اين توجد هذة الالة

[@user-rw2sc9qc7v]

Какай из них самый лучшие

[@Jokker-id5zu]

Первый и третий

[@germantinizhanay4689]

Im want that

[@thiepduongdang8034]

Máy 4chuc năng bao nhiêu tiền

[@davoodzarei695]

[@ramoncuriel330]

Precio y donde puedo conseguirla

[@hoangnong4836]

Giá bn vậy

[@JoseLopez-ul1pi]

La verdad es una gran máquina de soldar en que precio anda amigo

[@MakeAndTest]

Link in description

[@nyobkho2siabvue609]

ເຮົາຢາກໄດ້ຫນ່ວຍຫນິ່ງ ນາເຈົ້່າ

[@harotaro1067]

I have the Hitbox machine..

[@Bhoy51Pandacan-nj3jh]

Pricelist boss

[@ronalddahua1821]

Precio de las máquinas

[@mdalaminislam5949]

Jasic welding machine made in any country.

[@praveenroyal7654]

Best MIG welding please request me

[@fazrulazwar8269]

Harga brp, trims

[@rebzikrspizdati3344]

Лучшесть сварочных аппаратов определяется красивостью швов?

[@unalyavuz-mq5xq]

Alabileceğimiz telefon ve nekadar

[@IntanSyafina-pw7mc]

Berapa harganya.

[@asliddinmusaev5453]

Здравствуйте сколько стоит какой опарат

[@durankaraca1592]

İyide nasıl vede nerden sipariş edecez

[@kwadwowiredu7241]

Please do can I use oxygen instead of nitrogen gas? For TIG

[@user-ny3zz2zm2s]

No

[@ali-ascentsayder5641]

bu kaynak makinasını yurtdışından türkiyeyemi getirttiniz?bu makinalardan 4+1 olanından almak istiyorum türkiyede yaşıyorum.bu ürün çin gümrük vergisi nekadar çıkıyor bilgi verirseniz çok memnun olurum.teşekkürler.

[@coskun-1903]

ali bende aynı seyi düşündüm bizim buraların fiyatları ıel orasıı arasında ucurum avr burda sadece tıg kaynagı dunyanın parası olmus almanyada STAHLWERK 250st ın satıcısı hamburg tarafında bır gurbetcı arabay koyup getırebılıryor yöntem bu sekılde diyer türlüsü . urun 1250 eyro kapı vergıler ve otv dahıl 1800eyoro da onlar ıcın ıstıyorlar baya bı arastırıdım. en guzel yönetım zaten alıp satıcı olmadıgımız ıcın gurbetcı dostlardan temın etmek

[@r_0cz]

كيف يمكنني حجز قطعه

[@cherylynsatumbaga3437]

Where to buy this item?

[@user-np8tj4ii6m]

هل هناك وكيل في العراق وما صناعتها

[@gustavoromeroromero5820]

Cuánto cuesta la planta de soldar Me urge una de ese modelo

[@franciscojasso2541]

Cuanto cuesta

[@amalaladdin6156]

Fiyeti kaç para

[@user-ds1jh5yp8y]

Ga bao nhieu 1 may han a

[@marianitoison7265]

How much price this welding machine

[@user-oq8go9wc5p]

ما سعر هذه الاله

[@joseluisfigueroatorres3448]

Me interesa la maquina precio y dirección gracias

[@MakeAndTest]

Links are in description

[@prudencemichael]

I need it how can I get it

[@hausangvanglua4933]

Where can I order please

[@vebtupaz]

Quanto costa e dove si compra

[@user-hc4rv2cp3h]

Salam semuanya ada hadiah gratis satu untuk muhklisin di aceh.ini dari mana ya. Lhoksukon jalan beregep cot u sibak. Melalui chopi boleh

[@sivakumarkoppisetti4992]

Mission price entha

[@user-tq2jl5kf4b]

Como faço para com pra

[@user-jj2tn7zh7e]

Каердан олсак булади бу апаратни доставка борми?

[@ousmaneongoiba5615]

Bjr j'ai besoin de vous mais comment je peut vous trouvez je suis intéressé

[@leojangawar2702]

كم السعر من فضلك

[@nguyenvinh354]

Muốn mua máy hàn ớ đâu vây ban

[@robertodanielrodriguezlava6299]

esta maquina ya se encuentra en Peru y donde lo puedo conseguir

[@randylenart9674]

Will any of them tig weld aluminum

[@servmike23]

no )

[@IntanSyafina-pw7mc]

Belinya di mana ya.

[@nienho3277]

62 trần Huy liệu Khuê Trung cẩm lệ đà nẵng Việt Nam

[@RoboCNCnl]

which one do you like best?

[@user-gl5lo7rs1g]

Decapower 😊

[@Max-81]

Последний аппарат не особо хороший по ощущениям.

[@mdmojmil7050]

How much Indian price

[@ravishankarkashyap7166]

इस मशीन का क्या रेट है और कहां मिलेगा

[@celalcnar8369]

En uygun olanı kaç lira evde kullanacağım

[@ronferris8354]

so in your opinion which was best you would buy from these

[@MakeAndTest]

Arccaptain MIG200 for sure, and if you would like a more professional machine with PFC and a remote control then take the Jasic MIG

[@westsolon7480]

Sadly .... none of these are available in USA🇺🇸 .... 😢 However, your content is appreciated & intelligent 👍

[@jbh.6257]

Anyone know of a machine for the US market ???

[@CoryHubbard]

That's really sad... Some of the features that are available would greatly benefit DIY folks and perhaps even industry in the USA. Sad to see lobbying result in suppression of technological improvements.

[@lolaa2200]

These are machines made to work on household plugs, single phase. I think the amp limit implyed by the 110V don't allow for this type of machines.

[@r_0cz]

اريد قطعه واحده انا من العراق