Best Nacon Unlimited settings for MW/Warzone

Follow me on youtube / thekappaconvict
Follow me on Twitter @thekappaconvict
I Salute You, thanks for watching and Subscribe for more!!!
www.nacongaming.com
Nacon right stick settings 80% 0.6 - 99% 0.61 Dead zone 0

[@nhojre]

Not a lot of help from the Nacon site regarding how the software settings effect the controller, so many thanks for your videos, they have helped me a lot..

[@ThekappaConvict]

Always glad to help 😁

[@saempyla]

Wow! I was struggling with those settings and these are perfect! Thank you!

[@ThekappaConvict]

Glad you liked it

[@imohbalu]

@@ThekappaConvict Hi dear, what do you recommend for me because I play a lot of SFV between nacon revolution pro V1 vs V3. In my opinion I don't mind the cable because V3 is wireless and wired. But I don't mind the cable. But between V1 vs V3 what is the better dpad?

[@Spectre_Za]

Thanks TKC, been watching these since your V1

[@lacsapfilms1150]

Your settings are the best for me. I have been shooting much better since the change. Thanks

[@ThekappaConvict]

awesome glad to help

[@ilcorvo360]

Thank you very much kappa! 🏆 For me the best config of nacon unlimited you really did a hard work here mate! I use it in coldwar too! Warzone best so far for nacon unlimited

[@ThekappaConvict]

Glad i could help 🤝

[@ilcorvo360]

@@ThekappaConvict yeah mate morning! 😊 It was wonderful

[@RenxChilla]

I will try this out,have just started playing a little warzone as Apex getting unplayable due to SBMM.That graph has always puzzled me lol

[@ThekappaConvict]

lol yeah me too it makes little sense now I kinda get the feeling though that it is better than the other way and has more config to it

[@jesusportillo9258]

Broh, What is your configuration in your nacon control for apex? I still don't have it properly configured.

[@samuraiflexr3012]

Yeah apex settings will be amazing easy to follow videos thank you.

[@ThekappaConvict]

Thanks, I appreciate your comments

[@horizonthunder2523]

What do you reckon is the best setting when adding thicker ring to the analog.

[@ThekappaConvict]

putting both points to top right seems to be the go to due to the lack of flexibility id say that's always going to be the sweet spot

[@edenslife2031]

What weight do you use on your controller?? Does it matter when playing warzone?

[@ThekappaConvict]

none buddy

[@superjavi9820]

Sweet mate

[@ThekappaConvict]

VER POG dont foget i livestream www.twitch.tv/kappaconvict

[@joranstuyck7884]

You should use one of the back scufbuttons for phrone and slide is very effective

[@ThekappaConvict]

it's not good on the Nacon Scuff maybe it's better but the position on the back buttons are awkward.

[@joranstuyck7884]

@@ThekappaConvict indeed but i only use the S1 and S3 those become familiar after a while and once you get the hang of it its much easier so even as you slide you keep your thumbs on the joysticks and not on the O, this will get you to aim better right when you slide

[@ThekappaConvict]

True true may try that 👍

[@DomeV9]

best settings Thanks!

[@Ramonis1000]

Hi I ask you in another video of yours how do you compensate the lack of tension on this controller I mean I feel like I can't aim properly at longer distances because sensitivity won't let me aim correctly is too high how do I increase this? Sorry to ask you again Idk if you answer me in the other video because I forgot which one it was

[@ThekappaConvict]

just go to the right stick setting and put the dots you can move and stick them top right all of the ones you can move and it will reduce the sensitivity, also you can add dead zone to reduce responsiveness but be careful with this as it will make shooting long distance a little less precise if you go too far.

[@Ramonis1000]

I understand about the dead zone but I didn't understand about the dots could you please show me a screenshot of how i should put them?

[@ThekappaConvict]

try this kzbin.info/www/bejne/gKHHhWmmhcynpqc

[@Ramonis1000]

I try it but still don't feel comfortable while aiming it's like it has some kind of acceleration that I can't get used to it maybe I should try the thick ring? Have any idea of what curve should I be using for it? Thanks for your help btw no other respond my questions

[@ThekappaConvict]

all i could suggest is lower in game settings

[@luizabaade6311]

i cant move the settings up or down, just right and left

[@luigif9657]

Same.. wtf

[@ThekappaConvict]

Did you manage to get it working?

[@ThekappaConvict]

@@luigif9657 did you get it working

[@ZeresVII]

That’s because you got the rev 3 not the unlimited I’m guessing

[@ThekappaConvict]

@@ZeresVII could be

[@arc123777]

Does the spacer size you have on the joysticks make any difference or do you fit the spacers then do these settings?

[@ThekappaConvict]

If you mean the extra parts to swap on the sticks is probably change and run test never used them myself

[@r33luke87]

Would love to try your settings but I can't even get my controller to sync with the software on my pc...

[@ThekappaConvict]

which version do you have?? if version 1 you will need software like DS4 if nacon Unlimited put into pc mode if you look at the back it says pc and the light will be purple

[@UpperGroundNGU]

works very nice

[@ThekappaConvict]

awesome glad to help

[@Arri9707]

I recently got the Revolution Unlimited Pro controller and my only issue is that the L1 and R1 sensitivity is super high and i can't seem to figure out how to change it. Do you perhaps have any advice on how to change it?

[@ThekappaConvict]

Hi, unfortunately you cant change the l1 and r1 you can only change l2 and r2.

[@Arri9707]

@ThekappaConvict Damn, gotta get used to its sensitivity then. Thanx for the reply!🙏🏻

[@ThekappaConvict]

@Arri9707 yeah no worries, anytime.

[@darknovafn]

1:45 in the right of this page can you explain to me what is the (sensitivity × - ) do? Because i had this controller and i wonna to be the same sens as the normal controller so what i use + or - ? For FORTNITE btw

[@ThekappaConvict]

Hi, thanks for the comment I will try my best to explain this to you. The + and - are Changes to the overall sense in the curves one which is the + will increase sensitivity and the - will decrease it. At the beginning with Nacon Version one, they didn't have this feature, and a lot of people struggled with just the plug and played as it was two twitchy to use out of the box. It can still be seen in the nacon versions 1 as the left stick was not able to be customised so if you used for such as driving games especially its tough to control. Now they have changed it for the Unlimited the shooter games I would recommend the + over the - I am still testing both. Again, I feel + is better at shooters on the unlimited version at this time of testing.

[@darknovafn]

@@ThekappaConvict Thank you for your response And yah im actually like + after see your video and tried it.

[@eliasfernandoacostapalacio1976]

Hello like these, I tried your settings and I stay very slow the camera to aim hand to hand, you can tell me the sensitivity settings of the joystick in the game (horizontal and vertical) please, by taking the camera to one side or down is slow. Please stay tuned.

[@ThekappaConvict]

I have new video uploaded today

[@eliasfernandoacostapalacio1976]

@@ThekappaConvict thks

[@TYT0]

There is a slight (2/3mm) dead zone on the fire trigger (R2) on the standard ps4 controller. I've also noticed this on the nacon controller. Do you still use the R2 as your fire button?

[@ThekappaConvict]

yes i still use r2

[@TYT0]

@@ThekappaConvict and is there any possiblity of removing that dead zone?

[@ThekappaConvict]

Did you go to triggers onobe them to 50%?? @@TYT0

[@kerrono]

Thank you and can you find some apex legends setting

[@ThekappaConvict]

Yeah sure that was on the list

[@kerrono]

@@ThekappaConvict thx

[@h4kkez]

What controller do you use? Just got my revolution pro controller 3 and haven't found any videos of setups for wz/mw

[@ThekappaConvict]

i have the Nacon Unlimited

[@keagankruger1198]

Apex please love the videos keep it up

[@ThekappaConvict]

Thanks for the comment

[@albertoespinal3145]

Will this settings work for the Revolution Pro Controller 3? I'm asking 'cause this video it's for the Unlimited Pro Controller version. Thanks in advance.

[@ThekappaConvict]

I couldn't tell you to be honest if it has the same app maybe but I wouldn't like to guess

[@dimwg1319]

Thats cool but what about the ingame settings in order to compine all these...

[@ThekappaConvict]

I didn't add any as I know people like there own sense in game I generally play in a low sense Such as 2 horizontal and 3 vertical 65 ads And dynamic curve

[@ThekappaConvict]

Also standard for aim assist

[@dimwg1319]

@@ThekappaConvict ok...i usually play multiplayer...and i have 10 sens...with .60 ads and iam pretty accurate ...but i havent try yet to change the nacon settings...

[@cypress0563]

Buddy..Big question..how come can you use the left stick in low sensetivity..i try your setting.but when i need to Run no to walk..it doenst run at all..i need to have the stick very high..can you run with those setting because i cant and im very confuse..

[@ThekappaConvict]

left stick you can still run, dont move sliders on left stick leave as default and just change to minus only and you only need to do this if you play games that vehicles use left stick to turn. Maybe on unlimited not as bad but version 1 it was way too sensitive

[@etiketiran5073]

ive ordered nacon revolution its coming soon,ive always been gamer on ps4,tell me is it hard to adapt to this type of controller for guy who is playing all life on ps4 controllers,

[@ThekappaConvict]

Everyone has a different learning curve so that I couldn't tell you myself. Only you would know. through playing, I know it has a higher sense then ps4 and 5 controller.

[@CrySis_01]

In my software don't show the option of "inverse Y axis"

[@123kaboooomm4]

Same problem

[@dominikjezek7499]

It's because you probably have nacon revolution pro 3..it's basically the same controller but it isn't 🤷🏻‍♂️

[@ThekappaConvict]

Dominik i believe has the right answer i think people have nacon 3 not the unlimited and they are different

[@ThekappaConvict]

its goto be the unlimited version

[@maugypaugy]

Can you do a settings for Destiny 2 PVP for this controller?

[@ThekappaConvict]

i could i do have destiny 2

[@maugypaugy]

Thank you 🙏

[@ThekappaConvict]

@@unknown-wm9ru I don't sorry I have asked Sony as well, and they refuse to say

[@ZmuBMAC1600]

How is this controller? I heard so many mixed reviews. Especially the cable wire pin breaks. How is the controller for Fighting games like Mortal Kombat 11, setting up combos and stuff?

[@ThekappaConvict]

Unlimited doesn't have the cable issue that was nacon v1. V1 does have macros, but they don't work very good at all, unlimited is good. In my opinion, especially the software. I wouldn't get one if you are getting next gen as this will not support ps5 games etc

[@ThekappaConvict]

I've never played mortal kombat 11 or fighting games this controller I feel was more designed for fps games to be honest

[@emmahas2moms57]

I have this controller built quality is great but input lag and back buttons are so bad

[@ThekappaConvict]

do u use it wired, i would always suggest this for best performance

[@Inka-Pink]

I can change everything apart from the colour of the ring. Bummer tho. Thanks for the video tho :)

[@ThekappaConvict]

Always welcome yeah only change is when you go from blue to red to purple you can change speed and have it pulse etc

[@Inka-Pink]

Doesnt let tho. Like only from pulse or spin. Will try on a different laptop. But thanks again for the settings, will try them on Warzone.

[@ThekappaConvict]

Anytime no problem@@Inka-Pink

[@pier3461]

hi, this setting of yours with which rings should it be used? 30 degrees, 38 degrees or 46 degrees? maybe you say it too but I don't understand English so well. Thank you

[@ThekappaConvict]

if you mean for thumbstick i use default

[@imohbalu]

@The kappa Convict Hi dear, what do you recommend for me because I play a lot of SFV between nacon revolution pro V1 vs V3. In my opinion I don't mind the cable because V3 is wireless and wired. But I don't mind the cable. But between V1 vs V3 what is the better dpad?

[@ThekappaConvict]

Good question i havent used this in a very long time id say if my memory is correct that both are pretty good and you can change them to 8 ways or 4 ways on both

[@astoroth__xo2937]

What sensitivity do you use in warzone else we will all be getting different results

[@ThekappaConvict]

I just put both the points you can move and move them top right on top of each other for left and right stick and use plus for the right side minus for the left

[@picorny]

Hello which steel rings are you using because i think that’s important

[@ThekappaConvict]

the base ones never changed them

[@ZZ-pt8th]

@@ThekappaConvict hello please which one its basic?middle?thank you

[@ThekappaConvict]

@@ZZ-pt8th if you mean the stick width i use the default one

[@battleshadow007]

hi what is your warzone sensitivity setting

[@ThekappaConvict]

65-70 ads speed sniper about 1.70

[@dutchwastednl4531]

when i open the nacon app the app doesnt reconize my controller or something can any1 help?

[@ThekappaConvict]

which version do you have ?

[@fortnitegamer-lr1ib]

Have you fixed it because my controller does the same

[@qwerty-rp1pi]

Hi, some question here. Why cant I move the dot up/down in the software? It only allow left/right adjustment, so I cant get the dot to 0.6/80 as in the video. I can only make it to 0.3/80, I'm using Nacon Rev Pro 3 or is this for another controller ? TY

[@ThekappaConvict]

this is the Nacon Unlimited its called if its the same graph it should i would have thought

[@ignacioduran7570]

I used to play on standard ps4 controller on 20/20 sensitivity and 0.00 deadzone. High and Lower zoom *1.00 Now I’m struggling to find my sense again with this controller.Your sensitive curve helped me a lot, but which warzone setting are u using? Thank you so much in advance My controller got broken forever, there is no way I can find an official SONY reply :(

[@ThekappaConvict]

Use what's best for you I always have low sense like 4/4 - 6/6 and ads I usually have at 85 for low and 90 for snipers

[@ignacioduran7570]

@@ThekappaConvict thanks a lot! ❤️

[@Biyonzo]

i would rly like to know what the numbers on a basic dual shock are.

[@ThekappaConvict]

They wont say and no one knows that i know of

[@Biyonzo]

@@ThekappaConvict so to lower the acceleration of small movements i have to angle down the blue line right? because my problem is that the smallest movements accelerate way to quick.

[@ThekappaConvict]

Yes what I suggest is put them both of the points you can move and stuck them top right corner as far as they both can go so they are touching this helps and make sure to tick the minus not plus on thr right side @@Biyonzo

[@pigna0706]

I don't see the Reverse Y Axis. Do I need to activate the option somewhere else? Thanks in advance!

[@ThekappaConvict]

It should just be there

[@sinansyuleyman1868]

and a stupid question, can you adjust the anti recoil on this controller?

[@ThekappaConvict]

No, it doesn't have cheat mods in it

[@MITSJL]

In the button screen @4:00, how do you actually change the mapping? I've tried clicking on everything and then trying to click on one of the buttons above. Nothing changes. How the hell does this work?! Bit ridiculous tbh they don't have a proper guide for this.

[@matthewvaldivia9079]

Having the same problem, have you been able to figure it out? I’m getting annoyed:/

[@ThekappaConvict]

Hi dude yeah that was weird at first you see the small and big you wanna click the big one and thats the one you input the button you wish

[@ThekappaConvict]

when you see two boxes you want to click the bigger one that where you input the control

[@MITSJL]

Matthew Valdivia hi man. Yes I’ve been able to figure out everything. Let me know if you encounter any more issues. :)

[@Jonathan-fx5pr]

They state you need to search the instructions on their website.

[@jersonfaria7600]

Pls do this video again on warzone 3

[@ThekappaConvict]

Hi buddy, there isn't really any difference, to be honest. I also don't have a nacon any more it broke after years of use, and I don't think I will buy another too expensive. I have looked into cheaper alternatives

[@abobrhom7]

Where can find the setting file. I'm not able to find it on the website you mentioned

[@ThekappaConvict]

goto my.nacongaming.com/en-GB/profile/all

[@plasmaowner5200]

Pls nacon 1 pls

[@ThekappaConvict]

kzbin.info/www/bejne/h3LTpJ6artSdeJY

[@ivan_7076]

Is there way to sprint without clicking the left analog stick

[@ThekappaConvict]

you can change to auto sprint in the games settings

[@melekbenmoussa7145]

The same setting works with Nacon revolution 2 ?

[@ThekappaConvict]

Possibly never had one so I can't guarantee

[@MoatzKansas]

@@ThekappaConvict And now bro?

[@ThekappaConvict]

I don't have v2 I've had v1 and unlimited versions if this is what you mean. Or if you mean setting they are still good may be doing some now I have a PC running for pc@@MoatzKansas

[@strikemodpackgamer]

can you use the settings for other games?

[@ThekappaConvict]

Of course you could try

[@strikemodpackgamer]

@@ThekappaConvict thanks these settings are good for other games

[@Usi_475]

bro do u know how i can connect the nacon compact to pc for warzone i am searching and searching but i dont found a solution

[@ThekappaConvict]

For the compact, I don't know if you can sorry

[@t1zlr183]

Hello please help me I downloaded nacon v1 software and I don't know how to change the language I didn't find any settings

[@ThekappaConvict]

try this one as i dont think you can change language www.nacongaming.com/en-GB/revolution-pro-controller

[@t1zlr183]

@@ThekappaConvict should I unstall the application and download it from this url

[@ThekappaConvict]

@@t1zlr183 yes and see what happens

[@johnnybeta8572]

can anyone help me please? I cant change any setting on my nacon pro 3 software. im trying to changes things but im cliking and trying to move but nothing happens.

[@ThekappaConvict]

Can you get into the App ?

[@hackabusi]

Does your touchpad work to bring up the mini map? Currently, I'm having to use the share button at the minute. Right pain in the backside

[@ThekappaConvict]

which game??

[@hackabusi]

@@ThekappaConvict warzone

[@damgresh]

Mine works

[@hackabusi]

@@damgresh change any settings or anything?

[@ceane1904]

@hackabusi do you find the solution? Because I have the same problem. My Nacon is recognised as xbox controller and not as ps4

[@ivandolic]

On what aim curve type and ingame settinhs do you play? Specifically for warzone.

[@ThekappaConvict]

linear and standard and 88-90 ads and 1.90 for sniper

[@ivandolic]

Thank you

[@ivandolic]

@@ThekappaConvict sensitivity around 4,5?

[@ThekappaConvict]

deadzone 15-20

[@Luleph]

2:18 I can't drag up or down?

[@ThekappaConvict]

you should be able to try the one connected to the red side first

[@mxsravenger]

When i tried it it too stiff to move even on max

[@ThekappaConvict]

Which part are you struggling with the aim or hipfire?

[@HapPyGhOsT25]

anybody have good settings for the division 2 for easy strafing . thanks

[@ThekappaConvict]

not at the moment sorry

[@Mayrol23]

kappa this setting work too for pubg?

[@ThekappaConvict]

not tried to be honest

[@Mayrol23]

@@ThekappaConvict can you do one for pubg? thanks for you reply

[@eyeofhorus3710]

dose this controller have rapid fire mode my friend ?

[@ThekappaConvict]

No my dude

[@1i1hawk1i1]

Hey man, can you please help me im not able to bind keys with my Nacon Revolution 3 controller at all. I can only unbind. Tried everything :(

[@ThekappaConvict]

Sorry to hear that buddy I don't know what you can do if the normal method doesn't work never had the issue have you googled it?

[@mightymuz5938]

Hey, I have a problem with controlling recoil on this controller for some reason, on my normal ps4 controller I have no issue, was just wondering if you can tell me what I can change, I need to pull my right stick down alot further than on the normal controller and deadzone is set to 0 🤦🏻‍♂️

[@ThekappaConvict]

Are you changing the curves? And is this console or PC ur playing on

[@mightymuz5938]

Havent touched the graph or anything, the sensitivity is - and shooting just seems wild when I shoot anything at distance

[@mightymuz5938]

On console, do the ads times you can change in controller settings in game effect the nacon?

[@ThekappaConvict]

@@mightymuz5938 no ads times such as the slider to make them kind of like trigger stops shouldn't effect that. I was thinking maybe you've added a curve and its slowing down your ability to pull down or adding like dead zones that might change this? One thing you could look at is 1 are you using a low value for aiming speed if you do maybe ad 1-2 on your vertical or have higher ads speed and lower vertical up and down and see how you go.

[@2802991]

I don't have reverse Y axis???

[@ThekappaConvict]

you might not have same nacon as me

[@LuNaTEC16]

What's ur dead zone setting on warzone itself

[@ThekappaConvict]

i just use the dead zone that stops stick drift

[@akatsukisalazar3338]

I just don't understand that x axis does and how does that correspond with the Y axis?

[@ThekappaConvict]

x axis is left to right y axis is up and down

[@ashfar1368]

Is there a way of getting rapidfire and another suggestion for recoil

[@ThekappaConvict]

No, you can't do that

[@ashfar1368]

@@ThekappaConvict got another question if you don’t mind, how can I get the controller to turn the PlayStation on all the time within the PlayStation settings I have seen another video but I forgotten how to do it

[@ThekappaConvict]

@@ashfar1368do you mean like the ps4 controller you can turn it on from rest mode? the other nacons could not do this so unless its a new feature to the unlimited I am not aware that can even do this

[@AMan-th1sy]

But can you show us the settings in the game??? Like should we let the deadzone 0 in the game??

[@AMan-th1sy]

I mean we need the settings that’s in the game, not in the controller 🙏🏻🙏🏻

[@ThekappaConvict]

I use 15 deadzone

[@itsajoke631]

I'm going to sell this controller if this doesn't work. Really want to like this controller. My controller is too sensitive

[@ThekappaConvict]

i understand my dude if its not for you that's fine it wont be perfect for everyone hopefully in the future nacon will let me work on it

[@itsajoke631]

@@ThekappaConvict well actually. I loved the controller now :) 😃 might be one of the best controller for me. Thank you for the great review!

[@ThekappaConvict]

Thanks, I appreciate@@itsajoke631 it

[@elijahscott5472]

it wont let me change anything

[@ThekappaConvict]

have you got this working now

[@capo27ss]

I have revolution pro controller 3 and this have not this y axis

[@ThekappaConvict]

That version doesn't have that feature unlimited is different to version 3

[@dug0103]

Is this set good for sniper gaming too ?

[@ThekappaConvict]

Not at moment may try but I'm not great sniper

[@BorlaxDKS]

Can you show us your R6 profile please?

[@ThekappaConvict]

I don't have one for rb6 yet

[@ZZ-pt8th]

Hello and please dedzone in game settings you have?

[@ThekappaConvict]

Dead zone was 0

[@ZZ-pt8th]

@@ThekappaConvict nice i have same

[@martinkinast9308]

Your settings in your nacon pro controller ???

[@ThekappaConvict]

They are in description if you mean in-game generally I use 4/4 ads 85 but use what suits you best

[@xxxzorroxxx123]

can i connect nacon pro to ps4 without USB Bluetooth receiver just directly to ps4

[@ThekappaConvict]

no, if its the one with a dongle you can only use dongle as far as I am aware

[@xxxzorroxxx123]

@@ThekappaConvict thanks for fast response.... yes need dongle I purchase from one guy who lost that part I try to connect nothing happend... maybe I will look from ebay for part.. thank you

[@ThekappaConvict]

@@xxxzorroxxx123 no problem

[@berkaycankat3915]

Bro i dont have the arrows up and down i have only left en right

[@ThekappaConvict]

What nacon do you have

[@sogwolf2296]

The nacon pro 3

[@MegaAmsterdam1]

yoo man saving the settings how to do that?

[@ThekappaConvict]

the save function is on the same page where you change things also dont forget to activate profile as well

[@hrkgames6233]

Can you send me the value of the curves for Nacon 2? I'm using 33 33 34

[@ThekappaConvict]

i dont know what they would be to e honest you could try the percentage and see if that can be done

[@desert1572]

Any good settings for cold war on nacon revolution unlimited

[@ThekappaConvict]

Haven't found any yet will let you know

[@desert1572]

I tried profile 1 with two medium ring for two l3 r3...is it amazing man

[@ThekappaConvict]

@@desert1572 Nice

[@wouterduplessisfgf2243]

Enny new setings Bro

[@ThekappaConvict]

Not just yet I have been kinda working on some let you know soon it takes a bit of time

[@raindancergaming]

Did you change thumb sticks

[@ThekappaConvict]

No I've never changed them

[@tobiramasenju5427]

Hello dude, you are setting for rainbow six siège ?

[@ThekappaConvict]

I could do need to re download it

[@tobiramasenju5427]

@@ThekappaConvict ok , thank you and good luck while wainting for a vidéo on the sujet.

[@vvNawaf]

How to do macro in 2022 Nacon PS4 Unlimited Pro Controller i dont know 💔

[@ThekappaConvict]

You can't do macros they removed this feature anything above nacon v2

[@TheHassan9000]

How to contact you?

[@ThekappaConvict]

i reply to comments or twitter @thekappconvict

[@longgamelarry964]

did you mention the pc mode being useless

[@ThekappaConvict]

No not that I know of PC mode I don't use

[@longgamelarry964]

@@ThekappaConvict How else are we supposed to map the buttons on pc or change any of the sensitivities I feel Nacon is just ignoring this issue

[@ThekappaConvict]

@@longgamelarry964 use the purple mode and use the in nacon app to map them

[@longgamelarry964]

@@ThekappaConvict It says controller not connected when switched to purple (pc mode)

[@ThekappaConvict]

@@longgamelarry964 it should work I don't use PC so I couldn't tell you and I don't have a PC to test it sorry

[@Tsume_-]

Bought this nacon but terribly disappointed

[@ThekappaConvict]

Why what's up and which one is it

[@Tsume_-]

@@ThekappaConvict its the nacon ultimate, is not as good as the classic controller gamplay feels "sticky" and mechanical. Not to mention that sometimes my character moves without touching the stick at all

[@ThekappaConvict]

Might be a faulty one I never had this problem myself where did you buy from @@Tsume_-

[@Tsume_-]

@@ThekappaConvict it is maybe my problem but i noticed a drastical decrease of my k/d per match on SnD Usually im on a constant 14 kills at least With nacon its like 6 per match with a general 4 or 5 deaths

[@ThekappaConvict]

@@Tsume_- I see ok the stick defo is a problem have you updated to latest firmware

[@PsyPirilampo]

Not good. Move its too slow.

[@ThekappaConvict]

its not for everyone i did it slower for better accuracy

[@mr_playstar7087]

This Settings whis 6-6 and Dynamic Kurve Are Aimbot THX