Want MORE FPS and ZERO INPUT DELAY? Go here: xilly.net In this video I'll be covering how to optimize your NVIDIA graphics card for the best possible FPS and least input delay. Join and go to #tweaks channel ► dsc.gg/xilly
Пікірлер: 78
@Xilly10 күн бұрын
Increase your FPS📈, minimize input delay: xilly.net
@ProphetSSJ10 күн бұрын
Thank you! Turns out my 4090 was running PCIex 8 4.0 instead of 16, Had to manually change it in the BIOS and now its showing x16 4.0. I had a MSI z790 motherboard and CPU PCIe was set to auto which made it x8 4.0, Manually set it to x16 and now its fine
@Jeyxx200310 күн бұрын
Thank you very much Xilly 😍🔥
@datampabaybuccs407010 күн бұрын
If profile inspector doesn't work for you, try deleting the optimization pack and redownloading it.
@sergeantlightning617810 күн бұрын
running an RTX 3090 max globally isn't a good advice. I'd recommend just having it on max performance on actual games
@j-cuts939610 күн бұрын
it literally make no difference. most of the things even in this video arnt needed lol
@Xilly9 күн бұрын
This isn’t a guide for you then, this 3090 runs max all the time, this is a stock P state on the GPU, it isn’t an overclock.
@sergeantlightning61789 күн бұрын
@@Xilly I know, but it doesnt do anything and it's running max. Very inefficient for energy consumption. Applying it on a per game basis is much better and it's basically the same performance
@xreve_9 күн бұрын
You should avoid selecting "Prefer Maximum Performance" because it causes the GPU to use more power than necessary. Once you're in a game, the GPU will automatically draw the power it needs. Nvidia’s control panel settings are largely obsolete nowadays, as modern games include optimized settings for all GPUs and manage performance on their own. While these settings made a significant difference for older graphics cards, they don’t have much impact on newer ones or my RTX 4070. What has actually made a noticeable difference-something that wasn’t as effective in the past-is overclocking. My 4070 now runs at 3,000MHz under load instead of the stock 2,625MHz, which was considered its upper limit. I added +215MHz to the core clock and +1,300MHz to the memory clock, and as a result, Forza Horizon jumped from 135 FPS at max settings to a stable 160 FPS, with no stutters. However, power consumption increased from 88W to 180W. Performs like a 4070Ti now. This is why "Prefer Maximum Performance" isn't a good choice-it increases power draw even when idle. If you're going to use more power, it should be for actual performance gains, not unnecessary background consumption.
@seniross92317 күн бұрын
bro xilly is actually the best tweaker i done some of his free tweaks fromk these videos 50-100fps+ imma buy his full tweaks soon
@dtkhrv5 күн бұрын
Yo Xilly, should I use usb c to usb c to connect my ps5 controller to pc? Also does plugging it into the back of my pc help more instead of plugging it into the front?
@earngaoeyno14singchagul202 күн бұрын
Thank bro Improved my RTX4070ti
@kasari64986 күн бұрын
Question, after doing everything can I update the drivers as normal? I did it and when I went to the nvidia app it says I need to install the driver
@krec477610 күн бұрын
Can you do one for intel Arc gpu's now?
@donkyfv6 күн бұрын
should I disable gsync for lower input delay?
@n_lst68925 күн бұрын
yes, u should
@King_samurai-wt6hy3 күн бұрын
Hey I have a problem when every time I play games randomly my screen goes black and I need to restart my computer I don’t know if you can help me or not
@mellowistaken7 күн бұрын
Latest drivers dont show the developer mode for me, theres no option to enable it. Am i missing out on anything
@resolve6387 күн бұрын
GPUZ program has the 3.0 x16 selected after render for a 30 series card, 4.0 x16 should be on but its not comaptible with the motherboard- select anything different or just the bios settings u mentioned?
@resolve6388 күн бұрын
what if the best is 3.0 x16 on first slot _gen 4 gpu, would this change from what you mentioned around gpu-z being configured to do the gen 3 on bios gpu, and auto link speed just the same as your video guide, but capable of x16 4.0, just not in the pcie slots.
@weieaobzrizbejznbssbdkdbar27368 күн бұрын
Can you do a new video for the best monitor for low latency low input lag for Fortnite ? With different price etc please
@Xilly8 күн бұрын
I have already
@Taxman12310 күн бұрын
Should I do the last tweak on a 1650?
@mellowistaken9 күн бұрын
No. Honestly I wouldn’t really recommend it at all tbh. Doing an undervolt at the recommended max speeds is much better for the card with similar results
@cuddyfn32415 күн бұрын
i did everything in tyhe video now i cant load into any game such as fortnite or cod, my pc just instantly crashes
@jonathanmoreira893010 күн бұрын
why turn on rebar in nvinspector when you just made a vid on it being bad I don't get it ?
@paffyqt10 күн бұрын
Confusing man
@Xilly10 күн бұрын
Gives more FPS in some games even though it doesn't get enabled if you have it disabled in BIOS, in Call of Duty its already disabled for the specific NVIDIA profile itself. ReBAR isn't "bad", its just game dependent and most of the time does nothing or worsens lows.
@CH44CH10 күн бұрын
no funciona para mi te recomiendo off
@luvsfzx8 күн бұрын
Does this affect my gpu if it has gaming oc mode on the gpu with a switch to enable it?
@Xilly8 күн бұрын
No, switch it ur self
@STARCryptooN19 күн бұрын
good luck corrupting your bios, i recommend using a optimization video for your pc that doesn't mess with the registry.i would not recommend messing with the registry as it may corrupt your windows or bios and has happened to me before.
@Xilly9 күн бұрын
BIOS is hardware based, not a single setting in this video tampers with anything that could cause corruption, the only registry tweak shown was one at the end that is based on a persons current temperatures and platform.
@chriscouch91159 күн бұрын
just learn how to use your pc ez
@sohlr10 күн бұрын
does nvidia app add input delay in background, and does the overclock from nvidia app work if i close it
@C4YL3R10 күн бұрын
maybe you get some drops because of the overlay and once you overclocked it you can close it it will be saved :)
@rmyklt10 күн бұрын
my gpu only goes to gen 3 speed i’ve got rtx 3060 on gpu z it says x16 4.0 x 16 3.0 is this correct or wrong ? my gpu is in first slot on motherboard
@Xilly10 күн бұрын
Correct
@rmyklt10 күн бұрын
@ GPU - RTX 5070 - £445 CPU - RYZEN 7 9800x3d - £500 MOTHERBOARD - ASUS AMD ROG STRIX X870E-E GAMING WIFI AM5 DDR5 ATX Gaming Motherboard - £440 RAM - G.Skill Trident Z5 RGB 32GB DDR5 8000MHz RAM Desktop Memory for Gaming - £190 PSU - CORSAIR RM1000x Fully Modular Low-Noise ATX Power Supply - ATX 3.1 Compliant - PCIe 5.1 Support - Cybenetics Gold Efficiency - Native 12V-2x6 Connector - Black - £200 SSD - Samsung 990 Pro 2TB 7450/6900 - £135 CASE - Lian Li O11 Dynamic Evo XL E ATX Full Tower - £230 or hyte y70 £210 CPU COOLER - Lian Li galahad II trinity SL AIO 360mm Argb cpu water cooler - £170 CPU COOLER FANS - Lian Li Uni SL120 V2 Addressable RGB 120mm fan triple pack with controller Black - £85 MONITOR - Alienware 25 Gaming Monitor - AW2523HF 360hz 1080p - £300 Total - £2860 is this a good build or can i improve anything?
@ephyxfn10 күн бұрын
yo bro i did everything but now i get fps drops my gpu is the rtx 4060
@Xilly9 күн бұрын
Play more, shader cache
@ephyxfn9 күн бұрын
@@Xilly alr ty but now my pc and game keeps crashing
@STARCryptooN19 күн бұрын
@@ephyxfn he destroyed ur pc , never mess with registry even if ur doing the right thing trust me it destroyed ur shit
@ephyxfn9 күн бұрын
@@STARCryptooN1 :(
@SteakMan8889 күн бұрын
@@STARCryptooN1bruh😶🙏😭
@Carboz10 күн бұрын
after this, i dont get the display option inside nvidia control panel, any guesses why?, cus i really need that xd
@VylarFN10010 күн бұрын
what are your thoughts on atlas os
@VylarFN10010 күн бұрын
i wanna know if i should use it
@lol_naw10 күн бұрын
@@VylarFN100 use foxos instead
@onatics10 күн бұрын
@@VylarFN100 Dont
@diegoo1x10 күн бұрын
@onaticswhy don’t
@foreverliterallynobody10 күн бұрын
@@VylarFN100dont
@KozzieFn9 күн бұрын
can i do the last settings on a 2080ti
@Xilly8 күн бұрын
Ofc
@ndowie59 күн бұрын
Doesn’t say anything you say on msi, need to do another vid for msi boards.
@Samer_Design10 күн бұрын
you rly need to change the way of subtitle its rly distracting and annoying with perma flashing every word
@slattyjesus4 күн бұрын
Nice - have a huge fps drop:) COD Warzone looks so much better! Was at WZ before at round about 120-130 fps and now i have 170-180 (RTX3080)
@YT_Relic.9 күн бұрын
Do Intel gpu next
@_Alexey1_10 күн бұрын
god
@ZAZACLIPZ1k9 күн бұрын
bring back your free os pls
@Xilly8 күн бұрын
Never had one.
@ZAZACLIPZ1k8 күн бұрын
@@Xilly use to have it in ur cord i use to have it