BEST Portable Tool Storage systems (RANKED) WATCH BEFORE YOU BUY!

[@ToolReviewZone]

Which Mobile Tool Storage System do you like best?

[@VCGConstruction]

It’s nice to see that you’ve upgraded from the milk crates you used to use! Thanks Flint! 🎉

[@mrniusi11]

HART

[@jeremysimpson2471]

I have the Dewalt 2.0 I am heavily invested and do wish they had more accessories. That's my only complaint

[@jasonbabila6006]

Milwaukee for sure. 💪🏽👀👍🏽

[@bread-gz3rl]

I like ryobi link the best but I'd probably buy toughsystem 2.0 if I had the money.

[@TheFacilityguy]

The most overlooked advantage that sets Milwaukee and Ryobi apart is the latching mechanism is accessible from the front. Makes a huge difference in a van or when you have vertical stacks side by side and not a lot of side access.

[@danielshaw4692]

That's a very good point I've got a load of the DeWalt boxes and it is a pain to lock/unlock them as I have stuff next to it. It's too late as I'm invested in the DeWalt brand but the packout stuff is pretty awesome.

[@CaptainSeamus]

Craftsman Tradestak has that as well. VERY nice compared to Versa/T-Stak.

[@stacksmarter]

amen brotha

[@jamesnm21]

@@danielshaw4692 sell em and go red. Lol

[@nicmul]

DEWALT has drawers that are much better.

[@Flyingfrogs2y]

As a commercial electrician I use Versastack. Now it is a cheap system but it does have the Lifetime Warranty and I have tested the waterproofing and it will keep everything dry. My only issue is the roller box is only good for cement not dirt, the handle should be longer for taller folks and it can not go down a simple three piece set of stairs. Also you use to be able to walk into Lowe’s and just do a warranty exchange but now you have to call craftsman if your boxes break. I’ve had mine now for 4 - 5 years and now I’m replacing some boxes that finally broke through Craftsman and I’ll let y’all know the outcome.

[@Flyingfrogs2y]

Well folks in less than week (5 days) I received all of my replacement boxes. Pretty simple with the exchange and think that was a good delivery as well.

[@sloanNYC]

Ridgid did nothing with that system for like 5 years, they finally started adding some new stuff this year. Like the rest of their products it's like they fell asleep. But they are SOLID boxes. And you can get on sale sometimes close to $99 for that 3 piece set. It is amazing how much Flex has done in just a few years. Some great options now.

[@unclepungus7828]

I actually have their original 3 piece set. Has taken a lot of abuse. And I actually just bought some of their 2.0 boxes and I'm impressed. They haven't added anything like milwaukee but there is a lot more ways to customize it now.

[@sloanNYC]

@@unclepungus7828 Meaning Ridgid? They've added some the past year, but it was like the same 4 pieces for like a decade! LOL

[@unclepungus7828]

@@sloanNYC no they began with a few new boxes this year. They released like half boxes the new cooler and 1 or 2 others. Yeah it's nothing new new but it's a start

[@SilverBackELTorro]

I agree. Just picked up a few with the locking latches on the front . Good boxes.

[@AllAccessConstruction]

Mannn had my rigid boxes for 6 years.. They still hanging

[@mario3804]

My reason for going Milwaukee is Home Depot they always have sales specially during Black Friday. My previous job had the pack out system and love the versatility and now it’s in the only thing in my garage.

[@Igor-q3f]

Got rid of all my packouts. It took all over my van, was impossible to get anything else in the van. If you’re doing residential or occupied office service, VersaStack, tstack or best is Bott Smart van systainers or festool SysRoll is the way better. Specially when moving around tight residential staircase or hallway or specially going inside the house through the garage and laundry room where there’s barely room to walk. If you’re going through elevators and long condo hallways, sysroll is just a pleasure to move. The more heavy duty the box, the heavier it is. Still using some original Dewalt tough system and nothing broken or cracked.

[@mariusmihai1292]

I have Milwaukee packout and Dewalt toughsystems. If you don’t have a lot of tools, and usually small tools I recommend Millwaukee If you have large and a lot of tools I recommend Dewalt. The system of Dewalt that allows you to use any box you want without moving the upper boxes is just so practical that makes Dewalt my number 1 choice over time. Even the old boxes.

[@justinmackey2912]

as a team yellow fan, i really hate to admit it that yes the paclout system is pretty cool, i kinda wish i decided to put my yellow toold into a red box. just at the time i needed a new tool storage system the price for the packout was a bit too much for my liking. the only hope i can hold onto is that dewalt will soon stop sitting on their hands and start making better accesories for their tough system boxes

[@BUILTFORDTOUGH79]

I hope they all keep fighting. All that means is BETTER TOOLS FOR US!

[@Gary.6.10.19]

Had the Milwaukee, broke at the hinges on a couple of my Milwaukee. Been using the DeWalt tough system 2.0 for almost two years and I like it much better in most every way. The Milwaukee is now the loaner/spare storage setup

[@cbaer66]

Owning probably more packout than most people, I’m switching to systainers not saying they are better but they have some really nice features like weight sizes usable space. If you’re in or getting into Festool or Makita you will already be in the system. Just putting it out there.

[@ToolReviewZone]

Appreciate the feedback Chris

[@timmietimmins3780]

I like them, but be warned, they are quite fragile. In particular, the top handles wear out quickly, especially if you put a lot of weight on them. This is a HUGE problem, as they are fragile, and so if you lose a top handle and drop a stack down a flight of stairs, the tools may survive, but the boxes WON'T. I consider myself lucky I managed to find out about the handle problem before I found out the hard way. (and it's not just me, I have a co worker who literally just carries his sander and jigsaw in 2 systainers, both of which are under 5 years old, and BOTH of the handles have worn out and fallen off already. He is rough on tools for sure, but there is basically zero weight in those 2 boxes. ) Now, I just drive a 3 inch screw into the center of the pivot point on every box I buy (the boxes have an indent in the side of the lid in the correct area so the head of the screw doesn't catch, at least on gen 2 systainers, the T-loc generation). The peace of mind is well worth it. I do find it really weird that they are not part of these comparisons though. They are expensive and fragile, but the space efficiency, the weight, and the ease of access is tough to beat. they seem to get ignored, which I find odd.

[@markjames8664]

The systainers are nice if you already have them with tools you bought. They attach to the top of the Festool dust extractor I have (expensive but it does a great job), which puts everything on wheels. I use it in my garage. I probably would not take it on the road much as parts might break; it’s probably intended more for taking to a site for custom cabinet work.

[@DrewCreate]

My opinion is even if you’re just getting started or don’t have a ton of money to blow on a tool storage system, you should get Milwaukee pack out. If you get a lower end option you’ll eventually want to upgrade anyway and it will cost more than just starting with the best option. Buy one box at a time and work your way up. It’ll be worth it. The drawer system pack out is a game changer.

[@SusiesRepeat]

Too true.

[@tabinagi]

Not only does Milwaukee offer a lot of options that the others don't....there is also a 3rd part aftermarket that makes a TON of stuff to add on. You can make the handle on the rolling tote box removable, you can add level holders, extension cord holders, a front rail for your bottom tote that allows you to stack out from it, etc, etc. I honestly think that Flex took a look at all the aftermarket stuff that is available online and decided to implement a lot of it. While it looks good, the locking system seems like the weak point on Flex. I had my initial packout stolen with all my tools at a job site last month and I went back into the slim packout with the aftermarket holders for now. I'll eventually get back into the bigger boxes, but it's nice having literally everything I need in 1 box. Easy to reach and use.

[@runroemer7741]

Slim packout huh? Still liking it? Which specific one did you end up going with, if you don't mind.

[@PandorasFolly]

Invest in a couple airtags and attach them to some tools and the cases. Buddy of mine did it and was able to get back almost all of his tools from a pawn shop and they caught the guy.

[@geanbechthold]

How would you make the handle removable? That's what's holding me back from putting my yellow in the red box.

[@tensazero]

Dewalt Toughsystem kinda got left out in the cold. I very much agree with you, Clint. There is so much more that can be done with it. The garage system is very adjustable. SB&D is neglecting many things that has so much potential.

[@ToolReviewZone]

Not sure why they aren't focused on the system brother 🤔

[@mariusmihai1292]

Milwaukee has a lot of things that you don’t need. Dewalt has the most practical system. Accessing the under box without moving the upper box. This is gold for me. After you moving things around to access the under boxes you came to appreciate that the dewalt system is actually unic. I’ve gone milwaukee I’m back to dewalt. I only remained with mileaukee on smaller tools like electric and plumbing.

[@hilariohernandez340]

I got in the tough system early, and for years it was king. Dolly and all. Then pack out came out and was better. But tough system has one advantage that no one else has, and that's the ability to get to any box right away. When you have 20 boxes in a van, that matters. Literally don't have to touch any other box besides the one you need.

[@coreycantrell1627]

This. 100%. And nobody ever seems to talk about this at all

[@rjIIII]

What do you guys mean exactly when you say you don't have to touch any other box to get the one you need?

[@coreycantrell1627]

@@rjIIII look up the DeWalt DS Carrier or the DeWalt Van/Workshop racking. Each bocks sits separately on mounted arms rather than on one another, so that each box can be extremely easily accessed without having to touch the box above or below at all

[@mercedesautox]

No question, Milwaukee is the king of this space, and it's not even close. Everything else is a compromise. Signed: A Dewalt fan

[@dirtydurbin3673]

Milwaukee by a long shot is my opinion the best

[@msk3905]

Why is it the best because of the name?

[@dirtydurbin3673]

@@msk3905 it’s not the name they have the largest tool storage system also I’m already interested heavily in the Milwaukee products

[@travisvanalst4698]

@@dirtydurbin3673 In portable storage perhaps, but don’t let your heavy bias cloud you from the fact that there are other more quality tools out there.

[@ryanmccarthy406]

@@travisvanalst4698 true, I think packout is the best portable tool storage system, but I fill them with Dewalt tools of course

[@michaelklinefelter6696]

I’m not so sure, they have a lot of accessories yeah. I think stack pack is the better built, and honestly expect a lot more from them soon.

[@eclecticgentleman]

Can anyone of the systems besides DeWALT allow you to get the bottom box out without taking all the boxes on top of it off? You can't beat the DeWALT DS carrier with their tough system. You also forgot to mention DeWALT has the garage/van option too

[@coreycantrell1627]

100%

[@osheherring]

As an industrial electrician who has been using the husky connect for years now I can tell you durability is superb (not a single crack or bend) and that 100lb weight limit is false I have near 200lbs of tools and materials in mine and stacked about 5ft high and it maneuvers just fine. The husky connect dollar for dollar is the best option

[@rbproductions78]

Really love your honest unbiased reviews Clint. Keep up the great work, and thank you.

[@Slowhand871]

I like Ridgid . It’s water tight 1/2 the cost and more portable (smaller)than Milwaukee. The Milwaukee is really nice no doubt.

[@jamesnm21]

Got the 2.0 stack plus an organizer and a crate today for 225 out the door. The boxes are a little smaller and also lighter weight but super tough. Nice color too and I can buy 2 boxes or cases for the price of one Milwaukee equivalent. Milwaukee's crate is smaller than everyone else's as well. On the downside I can't hook my Milwaukee insulated thermos to the top of the stack. Lol.

[@georgiafan6618]

This was a really good review. Glad I found it. Had No clue that Ryobi was this good. The flex was a surprise too and I knew Dewalt was overpriced and not updating as quickly. I have some Milwaukee pack out gear and am going into this system because my drill/driver came in that box. Didn’t know what that was - now I do. It’s heavy. You have to do another video soon on the Bosch Boxx system, Makita’s stackables, and maybe even higher end Festool. Those Festool guys are OCD and their gear proves it. Go for it - do the comparo and then go back review the top units. Not easy to pick a system and you’re dealing with Lowe’s and Home Depot. This helped a lot. Thanks until the next one. 👍 🇺🇸

[@rlenoxIII]

The Dewalt Radio is absolutely available at HD, but the original version is much better. I have both and would recommend the original tough sys radio over the 2.0. While I really like my Dewalt Sys., especially after the release of the internal trays. I wish the Milwaukee system had came out sooner. I believe it is a much better system, I just can’t justify to expense to change my system out. Especially since I am a team yellow tool user.

[@hilariohernandez340]

I agree, it's better because they spent years developing it. But I'm so invested in tough system that it's not worth switching. Pack out ain't that much better. Plus there heavier and harder to get to the box you want with out moving a big ass stack first

[@1steelcobra]

I think the modular cart is the difference between the two that wins it for DeWalt for me, especially since it uses the same slide arms as the wall mount and van mount options. I see on Milwaukee's own site that the cart they have has issues with the plastic mounting elements breaking pretty easily. The Toughsystem option lets you access every box on your cart without unstacking.

[@TheEl24]

What is what you like more about the first radio over the second version? I'm trying to pull the trigger in one of those things...

[@rlenoxIII]

Not sure if they redesigned the 2.0 radio or not, but I had two replaced under warranty for speaker issues. I also have a problem with the charger in it. You have to remove the batter when it’s done, or it over charges them, which shortens the battery’s life. They both sound great (as long as the speakers don’t blow LOL). Happy listening on the job 😎@@TheEl24

[@dean_to2878]

Ryobi just announced a bunch of new accessories to expand this their system. For the price you can't really go wrong.

[@ToolReviewZone]

I know. 😪 they released the info two minutes after this damn video just went live 🤣🤣

[@voltagecherry]

I run the rigid, I built mine up rather than going all in at the start, for me and my job it works great, it’s weather proof enough for when I have to go through the snow or rain (along with the followed mud) it holds the tools I need well,the locking function is pretty decent as well, I personally keep my screw organizer off while working and keep one latch off my top box which holds my needed tools so if I’m only needing it I can quickly pull it off with out having to climb into the box truck I work out off fully, and it’ll manage to stay perfectly like so when driving. And the rolling function comes in handy when I need it. As mine dosent hold heavy tools it rolls easy. Though I’d personally want to upgrade to the Milwaukee as it seems to have the same features just far more customizable.

[@zachstewart4022]

Just bought the flex stack pack, literally blows my Milwaukie out of the water, it's just built better, and clips on and off far easier in my opinion

[@stephenpisanelli7108]

I like the interchangeable small parts organization of the original Ridgid system. Just toss the fasteners that I need together in the pro organizer.

[@UberWagen]

Milwaukee has drawers. That's all I really want. A 3-drawer, a 2-drawer, and a big box at the bottom. Possibly stick a tote on top.

[@moisesrobles7884]

Flex stack pack is the best number uno in the market i support good quality they think on everything that we the electrician need thanks

[@JasonBunnell]

Just bought Ryobi. I already had a few Ryobi link items so easy choice. I really like Ryobi. They're real nice like.

[@bryanquick16]

For me I ultimately decided on the Rigid System but I got the 2.0. Same standard stuff like IP65 weather rating, etc. The feel of these things I feel I could stack the whole thing up and roll it down a flight of stairs and it would be fine. It's also cheaper than packout system and you can remove the dolly portion of the system.. Yeah they need to expand the line but the base product you get is great. Im coming from the Husky system and while I liked it the to plastic pieces on the screw organizers cracked very easily. Also Im not a fan of all the bright ass colors on the Milwaukee and the Ryobi. Rigid is fairly understated with a mostly black box with some orange highlights. I know it doesn't affect the build quality or functionality but cosmetically they stick out a little too much for my liking.

[@jlk0221]

For all those looking at buying these and worried about the Milwaukee price. I was in your shoes. I was worried about spending all that money when I could get a ridged for the same price. I will say, I do not regret it. I have had my packout for a while now. And now that I’m making more money there’s so much more stuff that I’ve been able to get because of the amount that Milwaukee puts out. I would say don’t skimp on this.

[@jamesnm21]

Yep. You're right. As you make more money you can expand and upgrade your tools and organization is crucial to efficiency efficiency efficiency because time is *not* money, it's *greater* than money. Money is virtually unlimited. But you have a very limited amount of time in which to make that money. Always be ready to upgrade your way of doing things when money allows it and you're sure it's the right thing to do and you wont be sorry.

[@danielrosic2960]

If you have a tonneau cover, Milwaukee offers a suitcase style rolling box. Anyhow - I have the DeWalt system. I think it's the previous gen, called T-Stak. It sucks! The plastic latch housings break, and cannot be removed/replaced, so some of my boxes only latch from one side. And the organizer box with a clear lid, the lid has such a hard time cohering with the organizer trays, that it's virtually impossible to easily latch closed on the first try. I've bought a couple of the Rigid boxes, I keep them permanently exposed in my truck bed, just to hold all my strappers, lines and red flags. Love em! They latch without issue and are super tough. Debating whether to ball out and switch to Packout, or buy the Rigid, and sacrifice some modularity

[@azvoltmanphoenix446]

Wow !,thanks for all your work reviewing all the systems !! Your video's have saved me much more than money, a lot of stress and legwork .... you have really narrowed this selection down for me. Super job!!

[@ToolReviewZone]

Awesomeness 👊

[@johnfuhrman2854]

Ridgid has a much improved 2.0 version that is currently at $140 for the set. The new version has a number of improvements over the original. I have both the new Ridgid and the Dewalt Tough System 2.0 boxes and they are fairly comparable. The Dewalt system is rated for more weight capacity, but I don't think I would want to lug around 100 lb. per box.

[@whiskeyjim4126]

They didn't do their homework here. The 2.0 has a lot of new features over the 1.0. Even used an image of a brand new half storage box while saying they didn't really do anything to advance the system.

[@kconnor2371]

It’s funny I prefer the Ridgid 1.0 system. I like the smaller box better with the little parts compartments and the biggest wheel box which has room for my saws but also I can put some snips and pliers in the little slots. I like the medium box removable tool carrier better than the flimsy parts carrier

[@dantheman9395]

This is greatly organized. The top 3 really stack up to their usefulness.

[@angelramosexperience8698]

I love both my flex and milwaukee boxes I have to say they are both Real NAS LIKE!

[@robertdufour2456]

Thank you this thorough presentation!

[@Joethetoolguy]

I appreciate this Clint. Gotta buy four more systems now 😅

[@ihmesekoilua]

ugh. I'd like the milwaukee, but holy hell... around here the basic system is over 300, and to get ONE box with two drawers is 200, so if i wanted six drawers I'd be out 600 plus whatever the rolling part costs.

[@trevboster2438]

Ridgid has their new pro 2.0 series, definitely should have compared that instead of their old stuff

[@gary4645]

I have had the Ridgid system, sold it. As you said it wasn't going anywhere. Currently own 2 complete Milwaukee systems. Love em'. Looking very seriously at the new flex system. Thanks for the video.

[@jamesnm21]

That's my thoughts but I just got the 3 boxes plus a crate and an organizer in Rigid 2.0 system for 225 out the door. I'd be looking at basically twice that for Milwaukee and it's a little too much coin right now. This way I'm up and running and can add 2 boxes or cases for the price of one Milwaukee equivalent. I also like how tough yet light weight the Ridgid boxes are compared to the heavier Milwaukee, which also needs to make their crate bigger. It's like 2 inches shorter than everyone else's and that makes it less handy for fitting stuff in there.

[@markmallory185]

The ToughSystem® 2.0 Rolling Toolbox is built for real jobsite conditions with high-impact protection**. It is dust and water resistant with an IP65 rating and has a 250 lbs. load capacity.

[@billsedutto8824]

These videos (this and the cordless tool brand video) are excellent. It’s nice to have a simple breakdown of every brand with pros and cons and at least a tiering if not a ranking. Keep these coming. Would like to hear your thoughts on multi position ladders and accessories. Haven’t seen many ladder reviews.

[@ToolReviewZone]

Appreciate the comment and I'll definitely have more vids like this. Ladder will be put on the list 👊👊👊

[@johnkoval8287]

I have rigid for home and Milwaukee for work and nothing compares to the Milwaukee and the handle does come off real easy

[@shigthehandyman]

Great in-depth video brother! I’m a packout guy and I’ll probably continue being one and keep building on it as well!! Cheers!

[@johnterpack3940]

Kinda funny. I bought an M18 Fuel OMT a couple weeks ago as my first venture into serious cordless stuff. And I looked at one of the packout cases to hold it. I didn't get the case because it was just a plastic box you toss stuff in and I prefer my toolboxes to be at least somewhat fitted to the tools they carry. I ended up using my granddad's old toolbox which turned out to have compartments almost perfectly sized to hold various blades while the saw sat in the bottom of the box. But seeing a glimpse of what the packout system can do really has me thinking I made a better choice with the Milwaukee than I had originally thought.

[@danreger8924]

I agree 100 percent with your rating scale.

[@matthewkeller4398]

Where is the systainer…disappointed you didn’t include them

[@grimreaper1257]

I'm not going to lie Husky Ryobi and Milwaukee seem to be the best ones because the husky is definitely more a beginner's but overall i think its a good storage unit to have if you dont have alot of tools plus it'll save you some cash the Ryobi will be a great one they will hold alot of stuff weither you are a DIY Mechanic Contractor whatever you want it to be it's for everyone to use it and will hold whatever you got plus its customizable and there very durable so dont be afraid to kick it around itll hold up nicely and there inexpensive for buck as for Milwaukee I'm not a Milwaukee guy but I do have to say its definitely more of a professional use because it has extra storage and has more customization but there pretty pricey especially where you go to buy it

[@l-ssfhgr6118]

This is the comment I am posting everywhere possible: Bought this Flex pack out a few months ago. Used on three projects. The latches between the top box and the middle box kept hanging up or not locking. Soooo, tried to call company service to get a fix. Wasn't asking for anything but a tech to walk me through the fix(maybe a replacement latch?). First, good luck getting through, they DON"T answer their phones. After a half hour hold the message comes on offering a call back. No choice gotta grow old on the phone or give up. No call back, so the next day I try again, same deal, but this time I get a call back. Pleasant young lady hears the problem and takes all my info and says they are sending a new replacement unit!! Of course nothing took place, NO Replacement Unit, No Latches, NO NOTHING!!!! The product seems to be well made except for these few minor issues, however I would never recommend buying a Flex product. They have no customer loyalty. I no longer care to upgrade my tool platform to your products, as I was considering your power tool line. Not anymore.

[@theGiantAngryRobot]

I love milwaukee, I use milwaukee. It's great. I just tried out some flex tools and have been a little shook by my findings. I think in a few years FLEX might actually be in a real battle for top 3 pro tools category

[@aaronoconnor606]

Milwaukee because it has drawers so you don't have to unstuck everything

[@SusiesRepeat]

Started off with the Ridgid system as was cheaper but now using Milwaukee Packout, I know it is really too expensive but beats all the others hands down. Henery Rolls said Quality remains when price is forgotten.

[@gm28jtr]

Great list. Milwaukee was the top. But this new Tough Built system is going to be the king of the mountain.

[@MXvsATV144]

Way cheaper priced options out there like Bauer from Harbor Freight, MasterForce from Menards and Ridgid. Those can be $60-$70… and you can stand on all of them as a step latter. The Craftsman, Bauer and Masterforce I think all have the same box design and can stack on top one another. Get twice the amount of storage with other brands vs many of these mentioned in the video. I’m 200+lbs and have stepped on my Beaur, Masterforce and Ridgid boxes many times and taken them all off-roading to get to a job site. Milwaukee has the most options but wow they are so crazily priced, for a small organizer box with 6 wimpy slots it’s $40. Can get 3-4x more stacker bins for less from Stanley

[@rickwashek478]

Pack out is my favorite. Although Ridgid isn't bad at all also have a few if them

[@robertcahill8033]

would of liked to see how the new ridgid 2.0 system stacked up, much nicer than the orgional

[@brewdogjd]

Rigid 2.0….should’ve covered that

[@kitatit]

I’ve just seen the Toughbuilt Stacktech modular tool storage system here in Australia. Very well thought out stuff.

[@skatesup93]

instaling quick release pins on the packout saves the day

[@georgedavall9449]

Hey Yo Clint!!!! T.R.Z. Putting out a great Video here! Well Done my Man! And I think you nailed it on the rankings. I wish you were wrong on the RIDGID line, but unfortunately, I’ve encountered the same thing. I have the three piece set, and it is almost like they aren’t going to make it anymore, or any other stuff to go along with it. It’s a poor mans alternative to the Packout, of course nothing compares to the MilwallKay! Good stuff Bro! Peace! 👍✌👊😊

[@ToolReviewZone]

Appreciate it brother

[@pewpeww556]

Rigid needs to come out with some drawers

[@thomasmyers6000]

Wish Milwaukee made some inside (bottom of lid) mounting options... And side rail bars(stock, ok there's good aftermarket options)

[@hqn12]

Exactly what I was looking for, AWESOME VIDEO!! I’ve made my mind and will purchase the Milwaukee Packout System TOMORROW!

[@wiredperformance6130]

No disagreement in the order! I’m curious how the ryobi lasts over time. Why you mention the Milwaukee like ryobi came out with the garage storage first is misleading. Ryobi is different but still an adaptation of what Milwaukee has been selling. Just with more moving parts.

[@kentuckybeardsman]

I honestly think all the small batch guys doing aftermarket parts for the pack out look always have it ahead of every other company. Train the truck there are so many cnc'd and 3D printed parts for pack out now it's insane

[@jamesnm21]

Yep. I just discovered.modular systems a week ago and I already have an improvement for my ridgid 2.0 system. A D handle mounted between the telescoping handle bars that pivots with hooks to catch d rings on the back of the boxes to lock the handle to the stack for better control moving it up and down stairs.

[@CBrown07696]

I had the craftsman version and I threw it in the dumpster because it was so bad. I checked out the Dewalt system and it was so flimsy I didn’t buy it. I now have a bunch of the Milwaukee stuff and it is awesome. If you grab it by the corner, you can’t make it flex like you can all the others I’ve tried. All my tools are Dewalt but they’re stored in Milwaukee boxes.

[@RidgidRon]

I have craftsman, (two sets) because they are decent and cheap Dewalt (solid not as cheap one set) but are good, Bosch (first buy for storage-one set) hard britle plastic and Milwaukee (really good and very expensive one and half sets). Ridgid Ron

[@ToolReviewZone]

Appreciate the awesome feedback Ridgid Ron 👊👊👊

[@86Sando]

You forgot the Bosch L-BOXX system mate. Been around for ages and still holds its own.

[@jbrandt7]

I have some L-BOXXs too- they are nice, but definitely not waterproof (I can put my Versastack/Dewalt TSAK boxes on my rear cargo platform and they don’t let water or road salt inside, but can’t say the same for the L-BOXX’s)

[@nicmul]

DEWALT system is the best by far with the advancements they have made. they drawers are way better then any other company.

[@shakyzeg]

If you wanted to use a portable system instead of a metal tool chest, which brand would you use? Emphasis would be on casters, drawers, and things that open out? What would you put on top?

[@MorrisDigitals]

I bought the rigid thinking they would get going but now I am switching over to Ryobi (righ-obi) thanks to the link system and the new drawers and rollers they have coming out this year. Will work for my tools and my photography equipment

[@chris-C8]

Did you switch over? If so, how do you like it so far?

[@MorrisDigitals]

@@chris-C8 yes I have fully switched and I love the Ryobi link boxes and the rail system.

[@jeromereyes584]

I want to jump into the packout system so badly but I’m not in a career field that requires any of my tools. 😅 If I had a rolling tool box, I’d use it to roll my tools from one end of my garage to the other. 😂

[@txvet7738]

It’s time to edit this video, Ryobi just expanded their tool box system with stuff I’m interested in!

[@ToolReviewZone]

Hell I just got the email 😆. They had to wait 3 minutes after this damn video just went live 🤣🤣🤣👊

[@txvet7738]

@@ToolReviewZone that’s how they work man! I’m hopeful it will be sturdy enough for the DIYer!

[@dusbus2384]

Packout is only ahead of the flex system because it has been out long and has more accessories. I imagine the flex system being superior soon.

[@andrewwithers530]

I think milwaukee is top dog but there are a few that I think should be on the list. I have Hart brand and I think hand down is better than Husky and Versastack. Kobalt also has some boxes out now. Please check out the Hart one please.

[@CptMalding]

Milwaukee pack out with Makita tools. The best tools need the best storage! 💪

[@delliott777]

I think FLEX edges out Milwaukee on durability and future accessory options. But there are some features on Milwaukee that you can’t beat… forgot to latch your latches, Milwaukee has you covered. Customization still goes to Milwaukee, but FLEX is making the push.

[@ToolReviewZone]

I'm excited to see what Flex does brother. Holding my breat

[@brentjohnson6654]

I am a Ryobi fan but that Milwaukee looks real good.

[@1paulgood]

Flex is a case where the quality all supported by cheap tab latches that hold the boxes together… I saw these cheap latches broken at the store!!

[@kennedymcgovern5413]

No love for the T-Stak, brother? I kind of tripped and fell backwards into the t-Stak. I don't need my tools to be mobile on a daily basis, but I do like having them easily portable because I make quarterly 5 hour trips down to my Dad's house in Charleston to work on it and help him keep it up (he is 82). I also wanted my tool closet to have some uniformity. Most of my tools were in whatever bag I found on Amazon that was the right size, at the time I bought each tool. It was unorganized, and I always had to open more than one similar bag to figure out which one held the tool I needed. That system had to change. I liked the one Tough System (one) box I had. My first drill driver/impact set came in it. Those original drills have long since been replaced, but I loved the case so the upgrades to those originals live in it to this day. But, new tough system boxes for AL of my tools turned out to be a very expensive proposition. That was when I ran across the T-Stak II boxes. The 13 inch T-stak II boxes are smaller than that original tough system box...but man, they were selling at both Amazon and big Orange for 20 bucks apiece. So I bought seven of them (then an 8th later) and one of the deep boxes for 35 bones for the circ saw. The deep box was too big for the circ saw, so it is back in a bag (damned if I can find a box that fits the circ saw), so I tripped and fell backwards over having the deep box for batteries and sandpaper, extra bits, an extra fastback and such, with eight 13 inch boxes for tools *(two to a box, with the Sawzall having it's own box) to stak on top of it. I never meant to have a "portable system," but I ended up with one by default. For wheels, I just use my dolley. And brother, at 20 bucks a box...it is unbeatable. For the entire 9 box system I would up with, the soundproofing foam that you can find anywhere (the egg crate stuff) and a $10.00 label maker off of Amazon...such organization for a large tool collection can be yours for very close to 200 bones. If you don't have a dolley in your shed, add the cost of a dolley to that if you want to call it a portable system. Now, I have no idea what would happen if I dropped my tools off of the side of a large building, but I have no plans to do that (nor would I expect my tools to survive if I did, with any system). Nor does it have a radio, nor a cigarette lighter, nor a bobbling hula girl, nor a coffee maker nor a gift shop. But it is NONE boxes instead of three, and holds ALL of my tools with a bonus deep box on the bottom for random shit. But I did recently find out that the Versa Stack boxes latch up to the T-stak. So if people want to use both in a color coding system, they can do that. Shockingly, however, the Versa stack boxes are more expensive than the T-stak boxes. Yeah, they seem to be the same exact boxes, but the ones that say DeWalt on the outside come at 20 bucks a box, while the ones that say Craftsman are 45 bucks per box. You figure that one out. I am too retired to care, I am just mentioning it because it is true. Anyway, so that is what is what with the T-stak. It is just a suggestion for an add on to this list.

[@lordrayden3045]

Just saw the Klein version over the weekend at Lowe’s Really nice

[@TB-LivingFree]

Thanks

[@jamram9924]

There are a few ingenious adaptations out in the internet where the handle on the Milwaukee pack out handle bolts can be replaced with other types of bolts for this purpose.

[@nickbaker8936]

Sponsored by Milwaukee tools, eh? You didn't mention the huge list of storage bins available to DeWalt tough system when you consider backwards compatibility.

[@GavinJones-n7m]

In the uk dewalt three boxes and trolley 156 pounds I’m taking advantage of it whilst they play catchup and let’s be honest it’s 100 pound less than that of Milwaukee

[@nofsgiven3855]

Flex by a long shot in my opinion is the best one .

[@kentuckybeardsman]

This is easy!! PACKOUT baby!!

[@ToolReviewZone]

Hahaha, have to watch and find out brotha man Kentucky 🤣👊

[@LorandHungary]

@@ToolReviewZone Nah, we all know it.

[@dnalyen]

The only boxes worth buying are the clear top parts organizers. You can put your drill and all your accessories. Or jigsaw etc. big boxes are good for step stools and sitting while the boss is at the store

[@tylerelizondo3589]

I used craftsmans cantilever workshop box and it said 85 pound limit and i loaded easily 150 pounds in it. Best box i ever owned but looking to upgrade now

[@GrandKaiserOfKrieg]

I jsut bought a hart tool box at walmart just to put my warhammer stuff and paints in /best 89.00 dolla at walmart and its really nice Quality

[@OptLab]

Those companies don't understand that these boxes become furniture and one can not design clean stuff when the studio or garage looks like flashy red or yellow. The hardware can be stored in the shelfs or boxes, but not the boxes themselves, they can not hide.

[@drumfanatik316]

I have the Husky Connect. It’s fine for what I do. I’m a maintenance tech for an apartment complex. It’s fine that it only has a 100lb. capacity. Do you really want to lug all that up 4 stories? Anyway, it works great, it’s rugged, built well and has just enough accessories at the moment to customize it. I think with all the companies making these rolling tool boxes now, you’ll see more accessories for it? That being said, if I would’ve waited about 6 months, I would’ve gotten the Flex. That thing is awesome! As for the Ryobi Link, I just saw that they have added more accessories for it this year. But that thing still seems big and clunky to me! 🤣🤣🤣

[@Bowlnick]

Would like try out the Flex option but not for 300.00. If there trying to compete with Milwaukee and you can get that for a little over 200.00. I don't think Flex will sell very well.

[@ToolReviewZone]

Hoping to see some good deals this year 🙏

[@garycasper2929]

Milwaukee is only at that price because of Christmas sales. It’s normally over $300.

[@Muscleupsanddangles]

Milwaukee is the best but very expensive. I run almost all Dewalt tools with some hitachi, bosch, and yes even Ryobi in Dewalt Toughsystem stacks.the 3 piece Toughsystem is almost always available for 178 and there are some nice options. It's good but not great.

[@chancecaillouet3653]

I got kobalt. It’s built solid

[@surq0784]

Dang it! I didn't even know I needed these boxes but apparently, they had the DeWalt on sale at my local Home Depot.

[@jeffmorefield]

No Dewalt DS carrier?

[@kapo5650]

Great list but surprised I didn't see the Klein system