Best practices + How to scan a property & get a floor plan with the CubiCasa app

Рет қаралды 15,232

Күн бұрын

Пікірлер: 23

@soundtempleAU Жыл бұрын

how about build in robes? should they be open? 7:50 when you were scanning that small room you totally missed BIR on the right side of the room

@stevenyhof9816 Жыл бұрын

I wanted to test a dark space to see how Cubicasa would do for measurements by using a headband light. I scanned my living room and sunroom at night with only a lamp on in the living room. I often will get into basements of older homes for remodel work and being able to scan the space is really the only way. I have in the past got out paper and pencil or used MagicPlan which was a lot more work. When I got my scan back and looked at the dimensions I was surprised to find that I was only 1" off in the two rooms where I was off up to 5" on other test scans. I did find I needed to hold the camera lower a bit to allow the light over and into the corners. I am planning on using the headband light even in lighted rooms when I scan a whole house just to see the results. Anyone else have info on using a light to help brighten the space and getting better results?

@michaelmeaser716 Жыл бұрын

I have a home to scan with a finished basement. Should I scan as a continuous scan and start on the first floor, then the second and then back down to the basement? or does sequence not matter?

@cubicasa4133 Жыл бұрын

Hi, You need to scan everything from the property that you would like to have displayed on the floor plan in one single scan, including floors, garage, decks, porches, detached areas, etc. You can walk outside while still scanning. Sunlight does not affect the scanning process. If it’s dark outside, we recommend that you use lights. We advise you to start from the bottom and work your way up.

@minervarivera3516 10 ай бұрын

What if it's not scanning? My scan stops and takes a picture immediately, so I can't scan. It's also grayed out

@cubicasa4133 10 ай бұрын

Hi, kindly share your smartphone type and scan details via: www.cubi.casa/chat-with-us/

@straitjacketstudios Жыл бұрын

I noticed you seem to walk into rooms randomly down the hall, cris-crossing, etc as opposed to always working rooms from right to left. Its it a best practice to stay with a consistent direction or does it not matter?

@cubicasa4133 Жыл бұрын

The Best Practices don't specify a need to work from right to left when scanning. Prior to scanning, we do recommend users take a moment to plan a logical path through the property to ensure lights are on and doors are open. If there are multiple floors we advise starting from the bottom and working up. Here is the best scanning technique: www.cubi.casa/support/scanning/best-scanning-technique/

@carlosguerrerogonzalez6097 2 жыл бұрын

same questions, what about clostes?

@TheKikoman80 2 жыл бұрын

Sorry I haven’t

@cubicasa4133 2 жыл бұрын

www.cubi.casa/support/scanning/do-i-need-to-scan-closets/

@stevenyhof9816 Жыл бұрын

I scan into closets to the best I can without getting to caught up into it. I have been impressed with how Cubicasa generates my closets with little to no entry.

@remy3144 2 жыл бұрын

What if scan didn't pick up a room, do the scanning need to be redone?

@cubicasa4133 2 жыл бұрын

If it's just a room, you can open a Fix Request and include a sketch of where the room needs to go, windows, doors, etc.

@remy3144 2 жыл бұрын

@@cubicasa4133 thank you

@daROCK1972 Жыл бұрын

what the cost per scan for less than 5000 SF home?

@cubicasa4133 Жыл бұрын

You can see the pricing here: www.cubi.casa/pricing/

@TheKikoman80 2 жыл бұрын

How about closets?

@carlosguerrerogonzalez6097 2 жыл бұрын

did you find out about clostes ? thanks

@cubicasa4133 2 жыл бұрын

Walk-In Closet If a walk-in closet is large enough, please scan it. Otherwise, just stand at the doorway and pan to both sides. No need to walk in. Remember, you should back out of a closet if it’s small. Normal Closet Not necessary, but up to you. You can open closet doors and show the interior of closets in your video, however this is not necessary. Our software is smart enough to know when it sees a closet door that there is a closet behind it. If the closet contains special equipment, you may decide to open the door to show us what is behind it.

@DaysAreDying 2 жыл бұрын

Small closets don't need to be opened. I've kept a 6x3 closet closed and it still got everything. Good luck.

@stevenyhof9816 Жыл бұрын

I scan into closets to the best I can without getting to caught up into it. I have been impressed with how Cubicasa generates my closets with little to no entry.