Best Sony Adapter Canon to Sony follow up video (7artisans EF-SE) EF to E mount

[@vietnamquangvinh2756]

This is truly the best converter available today but few people know about it. I am using it and it works with most lenses for EF mount such as the 50stm or Tamron 2470vc G1 that support VC image stabilization of the lens. I am using it, the focus speed is not inferior to Sony lenses. However the 1.2 firmware worked best, I tried updating to the new firmware 1.44 and it didn't work, so I had to reinstall the 1.2 firmware and it worked fine again.

[@minutesback]

Thanks for the very useful information. I’m sure many who read will benefit.👍

[@charleskevincanetearabe3673]

How to install 0.1.2

[@vietnamquangvinh2756]

@@charleskevincanetearabe3673 just reinstall firmware verrsion 1.2

[@minutesback]

@@charleskevincanetearabe3673 I’ve not personally upgraded but hopefully the person who started this tread may help else there is a video online about the installation process but some who it did not work for me.

[@minutesback]

Hey what camera are you using btw?

[@revocolor]

This channel is underrated. Thanks for great share!

[@minutesback]

Thanks, I appreciate the feedback.

[@thebolshe-yoyo]

I have a sony A7 IV firmware 2.01 and the ef-se adapter firmware 0.1.4 I have a canon 50 1.8, a tamron 24-70 g2 and a tamron 70-200 g2 All of those lenses have the same problem with the adapter. The autofocus doesn't work at all when i'm trying to focus on the sides of the frame and i conly focus on one third of the picture. When i press the c/p button the autofocus works everywhere, however i'm not able to use continuous autofocus with video anymore. From what i understand, to use continuous autofocus with video i need to be in PDAF so i guess that the default for my adapter is PDAF and the focusing problem occurs in PDAF. But i have no idea if this is a problem with the adapter that somehow doesn't want to use it on 2 thirds of the frame or a problem with my lenses which support pdaf only in the center or a problem with the body and it's firmware. I tried all awailable firmware versions for the adapter (0.1, 0.1.2 and 0.1.4, btw i saved them in a repo so they aren't lost) older versions had focusing problems (didn't work at all) with some older lenses that i had (tamron 70-200 2.8 first version and sigma 24-70 2.8 DG EX HSM) so i bough newer lenses and those work fine with the latest firmware (apart from the failing to focus on the sides of the frame problem ^^). I wonder if someone has the same problem than me and if they managed to fix it. I tried to contact 7artisans through twitter and mail, i got a response on twitter but not a useful one yet and no one responded to my email.

[@minutesback]

Thanks for the very detailed response. I did have a Sony A74 for a days and managed to check a 50 1.8 - 50. 1.2 - 85 1.8 100-300 70-200 all canon which all seemed to work. I didn’t especially notice the issue you raised but I wasn’t looking for it. One problem I initially thought I had was that the autofocus wasn’t work with it, but then slightly disconnected the adapter and reconnected it and it started working. And sometimes in first use with the 100-300 I need to slight disconnect the lens and the reconnect and it works fine. A strange kink I know but after that everything seemed ok but obviously I wasn’t fully testing for what you found so I could be wrong. I also checked the 24-70 tamron the worked with the IS. I don’t know which firmware I have as I can’t connect to my pc atm still. Sorry I can’t be of more help but hopefully check comments for any owners of the A74 and find out if anyone there has had a fix for what you are experiencing.

[@gus.filmes]

Hello, I'm trying to find old firmware to try to update my adapter, do you think you can help me by uploading the files?

[@brianmagallanes8178]

Can you please share us the update files?

[@Expert124]

Тоже ищу прошивки на это переходник. Был бы очень признателен, если поделитесь.

[@cameragod1]

Been using it for almost a year now on my FX30 and had no issues. Updated easy using Win 11 PC. Working with Sigma and Canon lenses. I don't use lens stabilization so can't talk to that but AF works like native. Normally run with a matt box so haven't noticed the ghosting... but will look out for it now :)

[@PeteManabat]

What lenses? I have a 24-105 F4 L, 17-40 F4 L want to pull the trigger on this one so bad!

[@cameragod1]

@@PeteManabat Got the 24-105 F4 L on my camera right now. Just shot a concert with it and AF was perfect the whole time.

[@paperstacksfilms]

Do you by chance know is the sigma 18-35 1.8 art works with it? Or the canon 17-50 f2.8 efs?

[@cameragod1]

@@paperstacksfilms I mostly use the sigma 18-35 1.8 art with it. Works great :) ...haven't tried the Canon 17-50 f2.8

[@TrenchfootSalvador]

I have it AND IT IS THE BEST!!! All they need to do is fix the issues thru firmware and it will be PERFECT!!! Using on the new Sony A7C II!

[@fangkc]

How is the AI AF for video? I’m currently looking to get a A7Cii as well and use my EF lens with it for videos, thanks!

[@shadowrevival]

Hi, what lenses did you use? I have the a7c mk, thankss!

[@ormpoa]

For the backlighting issue, perhaps consider flocking the EF-SE to reduce stray light scattering. Metabones EF to E-mount reviews comment favorably on its flocking.

[@minutesback]

@@ormpoa I’ve never heard of flocking before I’ll look into that👍

[@TrenchfootSalvador]

I have the new Sony A7CII and only issue I have is in S&Q mode (which switches to Super35 mode), it stops autofocus from working. Switching to Super35 mode period stops autofocus from working. & thats really all my issues

[@minutesback]

That’s a strange issue I’ve not heard before. I must try that myself although I do think I’ve used the auto focus in S&q mode before on my Sony A7s3.

[@MaiElizabeth]

Hi. I love your videos btw. A question though - will it support lens stabilization as well? Planning to get a Canon EF zoom lens with stabilization to pair with Sony A6400

[@RRsalin]

I have the exact same question, someone please advise

[@minutesback]

I only have 1 lens with stab and it does work with my a7sm3 and the adapter. However, I've heard mix views depending on the camera and firmware in question. If you find someone in the comments of this or my other video and ask someone with your camera. Good hunting!

[@MaiElizabeth]

So IS works with A7Siii. It's a good start.

[@minutesback]

@@MaiElizabeth the 24-70 tamron did but the 70-200mm 2.8 didn’t appear to

[@RRsalin]

@@minutesback Thanks for the information!!

[@rehansheikh8396]

I have a7iii and ef monut canon 85mm f1.4 and sigma 35mm f1.4 it will work together with autofouse in S&Q vide mode

[@minutesback]

Are asking or saying it does work?

[@YannickReid]

Question, Does the base plate come off? Asking to see if it will interfere with mounting to a camera with a cage on

[@minutesback]

Good question I don’t it is removable as I generally need to mount on the adapter if on a gimbal but in my cage I don’t think it interferes.

[@benrowe681]

The other one that I see come up a lot more is the MC-11 for sigma to Sony however again someone people have had issues with canon lens not working with that one too I’d be interested to see if you’d do a review on that one as again those videos are all mostly 4-5 years ago i think I found one from 1 year ago

[@minutesback]

I defo don’t think the MC-11 works as good as I’ve never seen any videos where AF works as well. I must say I’ve never used one myself but I think there was a comment in one of my videos where someone had used both adapters and the one I’ve tested works better. Although it may have even been on another video. I’d do ever use the MC-11 please do feed back here as you raise a good point which could do with more feedback and uses 👍.

[@papolini109]

What about photography? It works any good?

[@minutesback]

@@papolini109 yes, most adapters work fine for photos it’s the video side that is generally problematic

[@acoast84]

How secure/tight is the physical connection between this adapter and lens and adapter and camera body? Does it have looseness?

[@minutesback]

I’ve found it secure, not had any issues. I’ve added up to a 70-200 which heavy although I normally hold it support the lens.

[@acoast84]

@@minutesback Thank you!

[@InqSheen]

How often do you use this adapter?

[@minutesback]

Pretty much whenever I shoot. I have some Sony glass also which I use but whenever I use the A7s3 I always at some point use it.

[@BryceShamwow]

Have you ever used the Metabones EF-E adapter Mark V? That's the other one that I've heard good things about, but all the reviewers I can find have used one or the other but not both. A comparison between the two would be fantastic.

[@minutesback]

I’ve not used that one but others and they’ve never had anything like the eye autofocus speed as on this one. But like I said I’ve not used that exact one so happy to be proven wrong or at least be able to test. I don’t get equipment sent to me but if I ever get one or borrow I’ll come back and let you know 👍

[@PhotographyByRune]

On my Sony A7 (Ilce-70) with the Canon EF 70-200mm F4 IS USM lens, I have no problems with the autofocus worth mentioning. But IS behave in strange ways. I.e IS starts when I turn on the camera. Then may suddenly stop when I use the auto focus. And I have to turn on and off the camera to make it work again. In P-mode it starts when you press the shutter button or the back focus button, as it should. But it also start if you press the center button. I only use this camera for stills, so have not tested much with filming.

[@minutesback]

Thanks for the update and the issue you’ve noted 👍

[@PhotographyByRune]

I found some more weird behaviour on the IS. This time in M-mode. IS is supposed to start when you half press the shutter button or pressed the back button focus button. . But it does not. Instead it starts AFTER you have pressed the shutter button, and keeps "rolling". Sp to make IS work you have to first take a picture, and then keep pressing the back button focus button, while taking pictures, This will keep the IS rolling. To make it stop, refocus by letting go of the Back focus button and press it again.... Well, at least that is a somewhat doable work around, if quirky....

[@PhotographyByRune]

Took the lesn on an off, and now IS suddenly works flawlessly, as intended by canon. I .e kicks in on half press of shutter, or back button focus. ???

[@minutesback]

@@PhotographyByRune tbh I’m a video only when I’m on my Sony. I mainly use the AF side of the adapter as I only have 1 IS lens which works OK but I have read varying degrees of use from comments on IS. They defo could improve firmware for IS although I think I mentioned in my second review that just have the AF is a big win for EF glass usage. But here’s hoping they solve the Is.

[@PhotographyByRune]

@@minutesback lets hope they do. I plan to aquire an EF 24-105mm f4 IS, that is a lens that will be my walkaround lens, so much more hand held phtography. So IS is going to be needed. But now I am more in doubt. I do own a Sony 24-70 F4 Zeiss, but not impressed by the sharpness. But cant afford sony glass, and with EF lenses beeing flogged off cheap by all the photographers switching to RF lenses is good opportunity to aquire some pro lenses' And this adapter makes that viable

[@jonathanelboim7338]

I've been looking for an adapter to use my Samyang lenses (which are compatible with my BMPCC 6K) on my Sony full-frame camera, specifically for video shooting. Would you this work well and also maintain autofocus functionality? :-) Thanks! Wonderful video

[@minutesback]

@@jonathanelboim7338 what Sony camera are you looking at using? Also are your Samyang lenses EF?

[@jonathanelboim7338]

@@minutesback Thanks for the reply! Subscribed. I have a few a6500 cameras, so this is also relevant to them. But in principle, I'm planning to upgrade to full-frame, a7 and fx3. I believe I'm using EF mount lenses because it's a Blackmagic CCP 6K that I'm currently using, which if I'm not mistaken, is indeed EF mount, and the lenses are compatible with it.

[@minutesback]

@@jonathanelboim7338 I can’t quite remember from the top of my head about the a6500 usage that I’ve read in the comments but of take a look through there may well be a comment about some usage on it. If I get time I’ll do a scroll myself. One thing I’d say is my Sony A7s3 works perfect with Sony firmware 2.11 in the camera. A tried it on firmware 3.0 and the video autofocus didn’t work well so I’m sticking to firmware 2.11 and will not be updating. I may do a video about that. One word of potential warning I might say is that there seems to some disparity in comments from people, whether there is firmware comb between adapter firmware or camera that creates a hiccup Is possible. Or there could production issue with some working better than others. Perhaps test or buy with the option of returning if it doesn’t work as planned. That said it’s been a life and money saver for me over the past year. The AF function has been as native for the age of the lenses I’ve used which are older being EF.

[@samuelbagas7741]

Can this lens adapter use lenses from Tamron?

[@minutesback]

@@samuelbagas7741 I’ve been using the tamron 24-70 2.8 perfectly fine. However, check comments on this and other video for cameras that are working. Also, I’m on camera a7s3 on firmware 2.11. I’ve not ungraded the camera firmware currently is causing issues so until they update again or fix I will stay on 2.11

[@yaserhamim4146]

which tamron? the g1 or g2

[@minutesback]

@@yaserhamim4146 tamron 24 70 di vc usd is the one I used. Which I believe is older than yours.

[@Kheiroo110]

MinutesBack : Could please tel me if the Viltrox Adapter EF-NEX IV is usable and compatible with SONY NEX-6 camera?. Thank you.

[@minutesback]

I’d love to be able to help but not used either of those items. If i ever I’ll come back to inform you. Are you look for photography purposes or video?

[@Kheiroo110]

@@minutesback for photography purposes.

[@benyyz]

Did 7Artisans remove the firmware from their webpage? i can't seem to find any link to firmware or uploading software on their site.

[@minutesback]

@@benyyz I’ve not heard about being removed but I must say their site isn’t easy to navigate. Did you manage to find it?

[@boredcat7]

I wonder if it has issues with the a6700 due to the "ai autofocus" algorithms used in that camera, and would that mean the a7c2 and a7cr would be affected as well?

[@minutesback]

I had thought that too but sure I’ve read on my first video that people using camera with Sony AI on some new cameras without issue.

[@boredcat7]

Oh which cameras in particular? From the top of my head I know that zve1, a7c2 and a7cr have it, possibly a7rv as well?

[@minutesback]

@@boredcat7actually someone recently posted about the a6700 with a list of working lenses in the comments. There was something about the firmware also so it might be worth a read.

[@TrenchfootSalvador]

I have the new Sony A7CII and only issue I have is in S&Q mode (which switches to Super35 mode), it stops autofocus from working. Switching to Super35 mode period stops autofocus from working. & thats really all my issues. IT WORKS WONDERFULLY OTHERWISE!

[@minutesback]

@@TrenchfootSalvador a really good point about S&Q. Not tested for that or noticed but will make a note for later 👍

[@gabrielcortez9699]

Will this converter work on the canon EF 50mm f/1.2 USM if I am to use it with my zve10?

[@minutesback]

@@gabrielcortez9699 I’ve not personally tested with it but it work great in the a7s3 however, the latest firmware on Sony makes it stop working so I’m stuck at 2.11.

[@bykevinmack]

is the &artisans adapter better than the metabones version 5 with the canon 24-105 lens?

[@minutesback]

I’ve not personally used the metabones adapter for the Sony but I think read a comment on one of my videos claiming that the metabones was as good or didn’t have constant AF for video.

[@bykevinmack]

@@minutesback I own the metabones and the 24-105 ef lens and I find the combo is continuously hunting/working/breathing. doesn't seem to just lock on and stay on. Was hoping the 7Artisans did a better job. I love the 24-105 but not usable unless in manual.

[@minutesback]

@@bykevinmack well the 24-70 that have works great for AF as well as other lenses. The 50 1.8 EF is the only lens I have that seems to work a little slower. Maybe ask in the comments or possibly take a risk on the adapter, I did and have been extremely fortunate with it. Obviously I can promise it will work. All the best with whatever you decide.

[@GremHopkins]

@@bykevinmacki had same issue, seems gone after turning off ‘micro adjustment af’ setting in camera

[@bykevinmack]

@@GremHopkins I've never heard of that feature on the fx3 but I will take a look right now. Thanks for the tip.

[@patrickhin4301]

Does it work with electric contacts ef vintage lenses ie those in the late 70's & 80's.

[@minutesback]

That’s a good question. The oldest lens I’ve tried is from the 90s I think which works but AF is a little slower. If it is a EF then it could work but if it’s another mount adapted then probably not. Maybe if anyone here has used, they may chime in. Or if you try in future let us know.

[@patrickhin4301]

@@minutesback Thanks for your reply , i have the 35mm-135 ef lens which gave excellent pictures on the canon eos 620 and if it does work then no need to buy an expensive sony fe zoom lens.

[@minutesback]

@@patrickhin4301 I’d love to know if you manage to test or buy and use, please return and let us know 👍

[@patrickhin4301]

@@minutesback For sure

[@patrickhin4301]

Contacted 7 artisans and told lens has not been tested so don't buy!

[@zine25100]

do you think it will work with A7ii?

[@minutesback]

It should work but the AF on the A7ii itself wasn’t as good as the following generations so I would imagine it would work near the A7ii however I have not managed to test on that specific camera.

[@zine25100]

@@minutesback thank you

[@SimonKage]

Hi, great video! I just received my adapter, but unfortunately the autofocus does not work during recording. I have an A7SIII on version 3.01 and use the Sigma 35mm f1.4 Art. Any ideas?

[@minutesback]

@@SimonKage do you have any other lenses to try it with? Dam sorry to hear that, have checked the contact point by rotating on or off again? I did have 1 tamron 70-300 it didn’t like and some which have been faster than other but a modern lens like the sigma 35mm I wouldn’t have thought would be a problem. Have you or can you update the firmware of the sigma? Or try a different EF lens to check if the adapter itself is working.

[@SimonKage]

@@minutesback Another Canon lens is coming tomorrow, I'll try it out 👍 I'll get back to you tomorrow! Thanks for the quick answer!

[@SimonKage]

@@minutesback Today the Canon lens arrived and unfortunately it doesn't work with the adapter either. I think the adapter can't cope with the 3.01 software.

[@minutesback]

@@SimonKage I’m on 2.11. I’ve not yet upgraded. I’ve been meaning to update but not done so yet. Have you tried updating the firmware of the adapter?

[@SimonKage]

@@minutesback Yes, and unfortunately it made no difference. I heard that the 3.00 software was developed based on the a6700, which had a lot of problems with the adapter.

[@PeteManabat]

I hope this works with the FX30 and 24-105 F4 L, 17-40 F4 L. Please let me know, Thaaanks!

[@minutesback]

Me too, I’m hoping to test it at some point

[@minutesback]

Actually I think in the comments below there is someone saying they are using it on a fx30

[@mmkang5123]

It works well on A7M4 and A7R4A. I am using it.

[@LiLToDDiEWoDDiE]

With not being able to connect the adapter to a PC, yes you will need to make sure that your usb cable is capable of transmitting data as well as power. Cables that are usually included with things like power banks/portable chargers can only transmit power and thus won't work for connecting to a PC. Try a cable that was included with a portable hard drive or camera. Good luck.

[@minutesback]

Thanks will defo try in future, although I am tentative to update since my device is working fine. Btw did ever get that ghosting or flaring issue assuming you have one?

[@LiLToDDiEWoDDiE]

@@minutesback I personally haven't experienced any ghosting myself, although I haven't used adapted lenses outdoors very much. Will give an update if I find anything new.

[@minutesback]

Brill, thanks, I'd love to know whether I should get another one or just keep the one I have, I think the flaring thing can be a bit of a sting in the tale but overall I do love this adapter.

[@Gryfder]

Is this adaptor (7 Artisans EF SE) better than the Sigma MC-11? Does it support AF for video mode alongside photography mode? Running a Canon EF-S 18-135mm f/3.5-5.6, planning to get a Sony a7c II..

[@minutesback]

In short Yes for video and photography although I've tested more in video, it's the best I've used for tracking faces and movement etc. The MC-11 isn't great, seems to work more like contrast for video constant AF. Big note is to say I've had not upgrade the sony A7smiii to the latest firmware as it made the AFC stop working in Video mode. Thanks sony but thankfully it works fine in 2.11.

[@GregorMima]

About the USB Cables. The common USB cable that comes with your charger is _POWER_ only not data. You need a dedicated USB data cable.

[@amalng]

Is there by any chance do you have that 0.1.4 firmware bin file. If you could share it that will be really helpful Thank you

[@minutesback]

@@amalng I’ve never been able to connect my adapter to the computer. I think I mis placed the cable it came with and I’ve for whatever reason the cables I have don’t work. If I ever do I will come back 👍.

[@amalng]

@@minutesback OK thank you

[@bakcheehong]

@@minutesback im not able to connect the adapter to my mac either.

[@minutesback]

@ are you using the cable supplied with the adapter?

[@bakcheehong]

@ I don’t think they include the cable. 😂

[@yaserhamim4146]

Will this lens work with tamron 24-70 f2.8 g1 (canon ef mount)? I am using sony a7iii

[@minutesback]

I've only used it on the 24-70 2.8 DI with A7sm3, maybe check the comments to see what users say. I you can try it I would recommend but some ppl have had various degrees of success with it. Thankfully, after a year plus I'm still very happy. So much so I didn't upgrade my firmware as it would stop the AF, so until sony fixes that I'm holding off firmware updates.

[@tn2943]

where can you even buy this? it doesn't show up on Amazon or BH

[@minutesback]

I bought on amazon maybe they are out of stock? All 7artisans have a 20% off Easter sale on at the moment direct from their online store.

[@romaingrandchamp4035]

I there! I just bought the adapter and it seems there is a problem with aperture control on sony FX30... Impossible to control aperture on Tokina 11-20 ATX Pro II f2.8 and Canon EFS 17-55 f2.8 (the only 2 Canon EF lenses I have...). It stuck to the maximum aperture on both lenses (f2.8). I'm on the latest firmware. Any news from 7artisans and an upgrade for sony FX30?

[@minutesback]

I'm sure I've heard a lot about FX30 in the comments of my other video, so see if someone has either had a similar issue or solved it by asking if they've had an update. I'm not sure if this will help but I tried a Tamron 24-70 on the Sony A74 and at first it didn't work but after re attaching the lens and adapter it then worked. And another point a 100-300 which for months I thought didn't work I got to work using the same method. I've never upgraded, so assume I'm on the base firmware, I think I said in my video I'm not going to update, at least for now, since it is for me it working I tried all my cables and couldn't connect so forgot about either trying to chase up 7artisans or problem solving that for now. I have the Tokina 11-16 2.8 and that does work so as you say it might well be a firmware thing, sorry I can be of more help but check my previous video comment section as you maybe able to ask someone there. I don't have an FX30 to test myself, although I'm very curious about that camera!

[@romaingrandchamp4035]

Thanks a lot for your answer! It was definitely a firmware issue… looking for your previous video and thé comments I’ve tried something: downgrading to firmware 1.2… and it works ! I was on latest firmware 1.4. What’s strange is that chinese website offers 1.4 firmware while 1.2 is on english website… Anyway… it works now… I don’t know the différences between both firmware since 7artisans do not publish « release note ». I will contact them to make a feed back. If I have an answer I will let you informed

[@dylanrayphotography3850]

Link for this adapter please 🙏

[@minutesback]

@@dylanrayphotography3850 which country are you in?

[@MyMarketingGuy101]

I’m using this adapter with the a7slll and a canon 70-200 IS L (version one) I’m getting very poor results with the auto focus. I haven’t updated the firmware. I also didn’t realize that there was a button for phase detection or contrast based auto focus. Do you think that could be the problem?

[@minutesback]

what firmware is your A7sm3?

[@MyMarketingGuy101]

I’m running firmware 0.1.2

[@MyMarketingGuy101]

@@minutesbackI just tried both my Sigma lenses and they work fine but I’m getting false aperture readings. I can’t tell if it’s the Canon lens, the adapter, or the firmware ??

[@minutesback]

@@MyMarketingGuy101 BTW I don't the firmware of the adaptor but the camera. My camera is on 2.11. think. The later version t3 of sony's update made my lenses not work so I'm sticking with version 2.11 which work great. I've never updated the firmware of my adapter.

[@MyMarketingGuy101]

@@minutesback thanks for your insight I thought that this would have worked flawlessly for me since I have the same exact camera. I have an updated my camera since they released the sone update about three or four years ago. I heard really bad things about the latest Sony update, so I decided not to do it. I also replied to your comment on the 7artisans video about this adapter a few minutes ago. It really seems like they have some serious quality control issues because so many people are reporting so many different problems. I think this company makes awesome cinema lenses and I’m about to release a video review on one of their lenses. That’s the irony of all of this, I really wanted to love this adapter!

[@paperstacksfilms]

Im having issues with it reading my Tamron sp 17-50 correctly

[@minutesback]

Which camera are you using it with?

[@paperstacksfilms]

@@minutesback Sony fx30, and it's been updated to current firmware still won't work

[@minutesback]

@@paperstacksfilms I’ve heard a lot of good things with that adapter and the FX30. Is it that you mean the adapter is updated or the camera is updated? I personally have kept the firmware of the adapter as I bought it.

[@paperstacksfilms]

@@minutesback I updated the adapter after it was having the issue with the lens. Even with the updated firmware tho it doesn't fix the issue. I've heard good things too but it won't play well this lens and the lens isn't bad cause it works on my canon 90d perfectly, and my canon 18-55 kit lens works on the adapter fine. So it seems to just not play well with my fx30 and the 7artisans adapter

[@minutesback]

@@paperstacksfilms yeah sorry to hear that, sounds like it’s specific to how that lens works with the adapter. I’ve used tamron 24-70 which works get but I once tested a tamron 100-300 which didn’t work so well for, well at least it worked for about 2 mins and then stopped. Btw, I have a canon 100-300 L 5.6 which on works with a strange kink to it. I put the lens on the adapter, switch the camera on, the lens wont work… but if I then on lock the lens hold and twist if I’m removing but don’t remove but then twist back to lock, it then works fine there after. It’s the only lens that does that, not sure if that will help but thought I’d mention. It’s less than perfect but means I don’t immediately need to buy a 100-300mm.

[@genewilfredsaises1261]

i'm on firmware version 0.1.4 my aperture is stuck, can't control it sony A7c, A7ii, a6300, 50 1.8stm, 24-105l f4 please help

[@minutesback]

Is it only stuck with the adapter or even with it using other lenses

[@genewilfred]

@@minutesback yes stuck aperture. can't control aperture

[@minutesback]

@@genewilfred assuming it is the lens across all of those camera it sounds like the adapter itself might be faulty? The A7ii and a6300 are older cameras but the a7C I would have thought should be working. Maybe try either updating the firmware or rolling it back, else ask for a replacement as something defo sounds like it is up.

[@elmarpodiebrad9570]

Does it work with the Canon EF 100-400mm f/4.5-5.6L USM IS Type II? I would like to use only for pictures

[@minutesback]

I've not tested this lens, however, in most cases photography works well on most adapters. It's in video that adapters are really tested.

[@gagapuk]

It just been delivered, I tried it with Tamron 28-75mm f2.8 and it's working fine. Af is not as quick as Sony lenses but still pretty good.

[@minutesback]

Which camera are you using. Btw thanks for helping people by posting the lens and the usage.

[@gagapuk]

I have a Sony a6400. I was playing with it for only 10 minutes but I'm happy so far.

[@Lovestroem]

Does someon have a link to the firmware downloads? I can´t find them anymore on the website, their how-to-video refers to a downloads section which is not on their website anymore...

[@Expert124]

I'm also looking for these firmwares. Their website only has version 1.2, and the adapter now comes with version 1.7

[@cameragod1]

I just updated the Sony FX30 to 5.0 firmware and now my adapter isn't doing AF. It's on the 1.2 firmware. I've heard others have had no issues. Do you know anyone with the 1.4 firmware for the adapter as I can't seem to find it anywhere :)

[@minutesback]

@@cameragod1 when I updated to the latest Sony firmware on a7s3 it stopped doing the continuous af so stuck with the previous.

[@casamusicrevisao]

You found it?

[@cameragod1]

@@casamusicrevisao No

[@taubenblau]

For Starters: It works on following Lenses effortlessly: Camon USM 50 f1.4 Canon USM 85 f1.8 Sometimes on the Canon USM 28 1.8 And that is the weiredest thing. Most of the time it does not work at oll wir the 28mm, but on two occasions it did. It was flawless... that is very disheartening for me because this lens was one of the main reasons for buying this adapter :| i cleaned all the pins an connectors, tried to rule out any mechanical issiue, but nothing works.... however there seems to be a combination of havin another lens on first, then switching to the 28mm lens without changing the adapter, then the Adapter works perfectly. As soon as i turn the Power off it stops working again :( needles to say that customer service helped a ton! any ideas any one??!

[@minutesback]

@@taubenblau wow thank you so much for sharing you will have helped many ppl no doubt. In the lens that sometimes works once the camera is on and the lens connected, click and rotate the lens as if you are taking it off and then reconnect. See if that works as I’ve got a 100-300 that only work if I do that strange process.

[@minutesback]

@@taubenblau also what camera are you using and firmware on the camera?

[@taubenblau]

@@minutesback Thank you for your quick response! i'm usin a A7CII. I just updated this morning. And voila: it works! until i switched off the camera and turned it back on again. Same thing as before :( I'll try your trick, but similar atempts did not turn out to be working :| I looked on reddit and found people using the 28mm USM. Seemingly the same performance as the other USMs... So sad, because this glas might be old has loud and slow focus, but it provides exactly the look i am aiming for. If it was just the AF it wouldn't be such an issue because i can pull focus my self. but not having the Aputure is really annoying... thank you for going so in depth about that issue

[@minutesback]

@ ah the aputure thing is annoying for sure. If you still have a canon you can always set your aputure there then swap out in a pinch but less then ideal. Please do keep us updated. I had been thinking about that 28mm lens myself.

[@mihaiflorea29]

with Tamron 70-200/2.8 it does not work, I tried on Sony FX 30 / Sony ZV-E10

[@minutesback]

Yes I tried a tamron 10-300 that didn’t work either although I found that it worked for a bit then stopped. The 24-70 worked well but maybe the telephoto not so much. Btw the canon 100-300 L 5.6 old version doesn’t work unless you slightly unmount and then reconnect. Strange but then it does work. Maybe try doing that and see what happens.

[@yaserhamim4146]

I used this adapter on my sony zv-e10 with sigma 18-35 and It works like a native lens.. However I used the ef 50mm f1.8 the old versin (non stm) the AF works but slow

[@minutesback]

Yeah I found the 50 1.8 slow too.

[@fangkc]

But the Nifty Fifty is notoriously slow to begin with 😅

[@saikiranragam1240]

Help 😭 Yesterday i Bought this lens installed on my zve10 with carbon 50mm 1.4 full fraem lens autofocus not working 😢 updated firmware please help me

[@minutesback]

Which adapter and which lens? Not sure I've ever heard of a carbon 50mm 1.4. Was the adapter working with other lenses? Is it that this is the first time you are using the adapter? Has it worked with other lenses?

[@JoshBedford1]

Just picked this up for Sony fx30 here’s my experience: EF 24-70 - AF works like a charm continuous focus and all! Only issue is no IS on this one but it’s a huge issue for me since I have steady hands and can fix in post. EF - 70-200 I (older lens) Continuously AF works for like 5 mins and then just stops working which is weird. I have no aperture control either. However the IS is still available for me. If any one knows a way around the aperture control that’d be great! 50 MM - Everything works great! My aperture only goes to 2.8 instead of 1.8 which is a slight bummer. EF 18-55 - Full function with Continuous AF, IS and Aperture control. AF is a tad bit slower than the other lenses and hunts just a tad depending on distance. All in all the is def the best adapter for EF lens to Sony body if Video focus is a big deal breaker for you. I personally won’t be updating it just because I’ve heard that doing so will make things stop working and customer support is garbage so trying to downgrade the firmware is a pain. Hope this helps someone!

[@minutesback]

I do wonder if the quality control is an issue with 7 artisans as I’ve never had an issue with iris or AF but have with IS. I think I’ve mentioned in video some of the issues but like yourself I’m still glad for the overall EF usage. I recently used in on a commercial project and it worked great although I did also use some native Sony EF glass also. Thanks so much for sharing your review, I’m sure you’ve helped out a few people for sure!👌

[@AE-cu5zy]

Are those all Canon brand?

[@JoshBedford1]

@@AE-cu5zy yes

[@jean-micheldupont1150]

Great squirrel shots! I have some around my house but never managed to get good close ups like you did. Anyone is using this adapter on the original A9? I'd like to adapt my EF 70-200 2.8 L IS II USM

[@minutesback]

@@jean-micheldupont1150 that would be a killer combo! If you post anything I’d love to see 👍

[@jean-micheldupont1150]

@@minutesback I ordered it so I'll let you know how it goes, I wasn't able to find it in stock anywhere, it should be here by the end of this month. I watched a few other videos on your channel, you're doing some great work, subscribed.

[@minutesback]

@@jean-micheldupont1150 thanks I really hope it works for you! I’m about to test it against the new a7s3 firmware.

[@jean-micheldupont1150]

@@minutesback So I finally received it and it works well. I didn't have to update anything.

[@minutesback]

@jean-micheldupont1150 glad to hear it

[@mattcero1]

Paint the inside barrel of this adapter with flat black paint. That will eliminate all the reflectivity and flare up issues.

[@minutesback]

I might worries that it would chip away or fall onto the sensor over time. Would that happen?

[@mattcero1]

@@minutesback I doubt it. Clean it with alcohol first, spray it lightly with flat black paint after taping the other parts off and you're good. Check it every year or so perhaps.

[@tagaPampanga]

had anyone tried it on an A6400? does it work? planning to pair it with a Tamron 24-70 f2.8.. thanks

[@24fisher]

It depends on lenses you're going to use. As for me, I can't get it work with a6400 and ef-s 50-250 is stm, on any firmware.

[@007liuming]

It is a mixed performance on my Sony A7R5. 1) on EF50 mm f/1.2, heavy breathing and cannot reach focus most of time; 2) EFS 11-20mm, can focus with heavy vignetting; 3) EF 24-70mm, f/2.8, works well; 4) EF 24-105, f/4.0, works OK; 5) EF 135 mm, f/2, works ok but does not show correct aperture; 6) EF 70-200mm, f/2.8 (non IS), works well; 7) EF 85mm, f/1.8, acceptable performance; 8) EF 300mm, f/4.0 IS, does NOT work at all. Due to the focus problem, I had a strange feel of the shutter button and was concerned if it was harmful to the camera body. So my overall verdict is NOT recommended for Sony A7R5.

[@minutesback]

Wow a detailed reply. I'm sure it will help people. Was this for video or for photo? Also which firmware are you using on your A7R5?

[@kokhualow3419]

There is problem using the adapter with the newer cameras. I used it on the A6700 and it is buggy. But on the older ZV-E10 is ok. I cannot find a higher firmware. Anyone has seen a new firmware? BTW the USB cable is very picky only one out of 10 of the usb cable I have works. I think its because the cables are seldom used (this is a very old usb cable).

[@minutesback]

Yeah, the new cameras seem to be a bit varied although I tried the a74 and that worked great plus I'm sure I've seen the A6700 used in the comments but it might mean downgraded firmware or upgrading.

[@rullyis]

my ef-se works better than the viltrox ef-es on a6700 tamron 24-70 canon 70-200, 85 so on

[@minutesback]

That really good to know, I had thought about trying the Viltrox at one point.

[@amermeleitor]

In my experience all cross brands adapters have some sort of problems. Even the best ones. The same brand adapters works better, being the Canon EF to RF the best one. When you have proven that your combination of lens + adapter + camera work, just keep it, but don't trust with another camera model or another lens.

[@this_time_imperfect]

Well, you’re using Canon lenses so you’re half way there. Not sure why you’d want to put them on a lesser quality camera.

[@minutesback]

I have an R6 , it good but is not able to do better than my A7s3. However, I can shoot and have shot with many systems which all have strengths. I’m not one of those blinded brand.

[@shzammpatapon9865]

Nah he’s trolling, sony>the competition. No need to be a fanboy to see that fact

[@ALASKASCHOICEMUSICVIDEOS]

Does this adapter work with Sony a7siii for video auto foucs?

[@minutesback]

Yes, I used that camera in my previous video on this adapter where I tested it. My a7smiii firmware is 2.11 as the next update made it stop work so I'm waiting to see if there is another update that fixes but for all is good with my video autofocus.

[@ALASKASCHOICEMUSICVIDEOS]

@ I just tried using the a7siii with the 7Artisans adapter with a EF canon 24-70mm f2.8 usm ii lens but my Sony wouldn’t let me control the iris/aperture in camera

[@minutesback]

@@ALASKASCHOICEMUSICVIDEOS What firmware are you using on the A7s3

[@minutesback]

@@ALASKASCHOICEMUSICVIDEOS BTW I use firmware 2.11

[@huynhminhtruc1718]

I have a Sony A72 does it have fast autofocus?

[@minutesback]

@@huynhminhtruc1718 I’ve not actually used that camera before so not sure how it performs 😇

[@levinh9270]

Will this converter work on the canon EF 50mm f/1.8 STM if I am to use it with my zve10?