Best way to make gaming steering wheel with arduino uno | Game controller

[@DedSecGamer0]

Finally I make it . It is working . I play NFS mw2 it is working in game smoothly thxxx bro I like your video

[@RMW360]

😃 Welcome .

[@RMW360]

To stay tune subscribe our channel and like our fb page facebook.com/profile.php?id=192405591361597&ref=content_filter

[@komal1090]

Hai DEDSEC GAMER i am getting this error while uploading code into arduino C:\Users\Lenovo\Desktop\Diy\Diy.ino:1:20: fatal error: UnoJoy.h: No such file or directory #include ^ compilation terminated. Error in arduino while uploading code plzzzzzz help me bro quick

[@kolhatkarchinmay]

@@RMW360 how to play game?? I understand all arduino steps which file and settings to do to play game like NFS??

[@A5Productions]

Its Finally I Made It Not make Haha

[@sayansadat9847]

proud to see Bangali People working this hard!great work guys!keep it up!

[@RMW360]

Thank you vaiya . dua korben 🇧🇩

[@fightsimverse]

yo great job dude i needed this for my flight sim setup. thanks!

[@MemeManJimmy]

Thank you, Thank you, Thank you. I’m making an xbox controller, that functions like an arcade racing game. This is exactly what I needed.

[@RMW360]

Glad you liked our video . support us considering subscribing our channel.

[@RMW360]

@Triggered Ved Arduino uno (atmega16u2 or 32u2), 10K potentiometer(for steering wheel) , 2 momentary switch . and few jumper wires

[@yogolee69]

@@RMW360 this happens to me Device selection....................... PASS Hardware selection..................... PASS Opening port........................... AtLibUsbDfu: 3EB 2FEF no device present. FAIL Could not open USB device. ISP done. -1 The firmware was NOT loaded... Did you install the Atmel FLIP program? - www.atmel.com/tools/FLIP.aspx - Is the Arduino plugged in? Is is it in 'Arduino UNO DFU' mode? Press any key to exit..

[@evokeet4612]

When you come to right place Indians Saved me:)

[@RMW360]

I am from Bangladesh 🤭

[@sunnychawan8575]

It is a great video man ❤️

[@RMW360]

Thank you 😊

[@josephachkar4375]

i have an Arduino uno and when enter on device manager the device tells me is a USB Serial.... a tried t change the driver when I arrive to las it tell's me Windows encountered a problem installing the drivers fir your device please I need HELP!

[@RMW360]

Are you using arduino uno for the first time ? If so , download latest arduino ide from arduino.cc . there you will get driver file . try with that

[@omtandon2741]

You Impressed me. I have started to build it.

[@RMW360]

Thank you.! GOOD luck.

[@omtandon2741]

@@RMW360 But there is a problem😒, I saw many videos but was unable to do it. In my laptop, it was showing Arduino Uno R3 instead of Unknown device and had some problem installing the drivers, Arduino was not accepting the Drivers........................ Pls, Help!!!!!!🤦‍♂️

[@omtandon2741]

I followed another video and it showed an error when I clicked "Turn into a joystick".

[@RMW360]

@@omtandon2741 did you enter YOUR arduino to dfu mode?

[@omtandon2741]

@@RMW360 Yes I did, But it was showing some problem

[@m692]

I did this for an old playstation 2 wheel and it worked great!

[@jay_pz4770]

Brother accelerator and brake are working but steering not working please help......

[@jakobmuller3907]

RMW 360 hello I've done it my Arduino is now a joystick but when I go into the settings the computer does not respond to what's happening on the Arduino Uno (press buttons and turn potentiometers) the other way round it does not work if I press the buttons or turn the potentiometer , and then I wanted to know: can I use the small buttons (4pins) instead of the switch in your video and if so, do I need resitors?

[@keshavkamediya]

Will it work without chip that you placed above the connecting socket help!

[@RMW360]

i did not place the chip. that chip is a serial communication ic that used for uploading programming sketch. in shot , if your arduino uno does not have Atmega16u2 chip this video is not for you ,

[@pmygoddamn]

@@RMW360 16u2? I have a atMega328 IC chip. will this project work with that?

[@RMW360]

@@pmygoddamn yeah, you will need megaJoy firmware. github.com/AlanChatham/UnoJoy/tree/master/MegaJoy .

[@close2yah]

@@RMW360 will it for for a atmega328P??

[@manulgoyal6662]

Is it better to use an IMU for angle measurement of steering wheel instead of potentiometer?

[@RMW360]

Simple answer is no . Potentiometer works great . If you want more accurate result then you can use rotary encoder

[@manulgoyal6662]

@@RMW360 what is encoder?

[@RMW360]

@@manulgoyal6662 kzbin.info/www/bejne/rGWlk4awf5KbsJY

[@DedSecGamer0]

Because of you only I was selected in science exhibition ( round 2 ) thanks bro Plzz make this kind of amazing stuff

[@RMW360]

welcome. glad to hear, you got selected 😍

[@rafiqjashim6322]

was tough but you guys did hardwork. congrats all

[@RMW360]

Rafiq Jashim Thank you 😙🙂

[@MehediHasan-ll9go]

You got new subscriber... Vai eta diye ki sob racing game khelte parbo?

[@RMW360]

Thank you for subscribing our channel. Ami Need for speed most wanted 2 tai try korechi. But kicu comment peyechi jekhane euro track e kaj koreche bolsen. xBox eo naki kaj kore.

[@AMMIREZEKIELJAYRISAELBO]

TYSM BRO! (it worked but the potentiometer is sensitive idk if it is, when I don't touch the potentiometer or turn it my wheel automatically turns)

[@liamheymans3772]

It is amazing how you do this stuff love it

[@RMW360]

Thank you 😍

[@prod_jay2132]

Very good job man keep it up. But can you please tell me how to make a PS2 controller connect to Arduino to pc with unojoy software?

[@simtcr]

Can I use eps8266 nodemcu instead?

[@mbchannel1037]

What driver did u use? Arduino Uno Rev3 or Arduino USBserial. Because u didn't mentioned in the video

[@RMW360]

I just selected this folder drive.google.com/drive/mobile/folders/18wAJTDvixndr6rdGIJImLXgPg1Ai6LH7/15WbrOqpNnu3wleEWFpeGW1pUncQIQgj9/1MIm-gpj1lwIlXxPEWGyA_ISoxgbtOAXl/1YPYfYkVX9daHiAAQAqKHmQYfoM4-xC5u?usp=drive_open&sort=13&direction=a

[@RMW360]

In my case the driver was automatically detected

[@mbchannel1037]

RMW 360 Ok thanks! It works!! 😄

[@RMW360]

@@mbchannel1037 welcome,🙂

[@ManueldelaFe]

It's a good project, but I think it can be adapted to make a spin control for arkanoid games

[@RMW360]

Limitless possibilities. You add anything. You may check this Nintendo video. kzbin.info/www/bejne/Y2XbeJdurKmoiac

[@markmfpv]

Hi, is there a way to add 2 more potentiometers as brake and gas instead of buttons?

[@RMW360]

Yes but in the unojoy firmware , there is no option for analog gas and brake I mean slower or faster acceleration. Instead you can make use duty cycle for emulating potentiometer based gas and brake

[@DedSecGamer0]

Now I am making h shifter for next round of science exhibition

[@marcopozzi522]

a question... are you using arduino lonardo or uno? because in the video u wrote arduino uno but allways un the video u can see that the driver is for arduino leonardo

[@RMW360]

After changing the firmware, arduino uno act like HID device. There is nothing like Leonardo

[@revathipathi-lm6nk]

Wow ... Bro u did a wonderful project.... But plz upload a full video from game starting... If u give clear information from top to bottom definitely I will increase u r subcription ....

[@RMW360]

I am planning to make a 3d printed version.

[@revathipathi-lm6nk]

hai bro i got a problem..... i did all what u said in above video tutorial, but i didn't get unojoy joystick option in devises and printers option... can u tell me how to solve this problem

[@DedSecGamer0]

In drive there is an diagram of ardunio uno that diagram is correct . Or I have to use bread board also for making it

[@RMW360]

both are correct . try on breadboard first then make circuit

[@cosmicgamerz222]

how Much "k" potentiometer should we Buy ? 10k or 100k or 1000k??

[@RMW360]

10k is enough

[@TheGamer-ee2rv]

can this work with xbox one? i need a racing wheel but all to expencive :P

[@hamzausmani8015]

Accha what device did u use for the accelerator and brakes...I'm still a noob at Arduino..so I just wana know

[@RMW360]

Push button.

[@foxgaming096]

When I did the test, the cursor for the potentiometer keeps darting back and fourth, and when I push the gas, it doesn't work

[@RMW360]

Multi-potentiometer performs better. You may try accurate POT. Please check the digital pins with the code. I have mistakenly shown wrong pin numbers 😅

[@foxgaming096]

@@RMW360 Thank you so much, I also accidentally used a 95° potentiometer, and I just had to rewire the gas

[@Rehayi]

"Connect reset pin&gnd" after this step arduino ide does not see the arduino in port and makes this error; avrdude: ser_open(): can't open device "\\.\COM3" Also I have seen ATmega16U2 in device manager. How can i fix this problem?

[@higaddrip2583]

Does the glue come off for other projects?

[@huseyinakkabak3244]

how to make potatiometer 5k or 10k ???

[@Science_36014]

how can uses 3 more potentiometers for the accelerator , brake , clutch

[@vasilsvanidze]

I haven't ISCP2 pins and i have only ISCP1 pins on my arduinoUno. could you tell me how to connect reset pin and GND?

[@RMW360]

Whats the model of your arduino uno? Is it smd version?

[@kafikent7375]

Bro I have a question ...can I add 3 total potentiometer .. because 2 for padel and for steering...

[@abdulmuiz6875]

Does the resistivity of potentiometer matters

[@abdulmuiz6875]

Can we use potentiometers for brake and accelerator

[@DedSecGamer0]

What is that u used in brake or acceletor

[@RMW360]

2 buttons/ switches, one for acceleration connected to Arduino pin 1 and ground ,, another for brake connected to pin 2 and ground

[@mbchannel1037]

I just need help, my Arduino Uno driver stucked as Unojoy. Could you help me to return it back to the Arduino Uno driver. Even I uploaded new sketch. It says error couldn't find the Port com 4.

[@RMW360]

Follow this steps: Plug in Arduino Connect reset and gnd pin Run TurnIntoArduino.bat from unojoy folder After running the file replug Arduino . Then, Check Arduino driver from computer Manager

[@nishasanil6626]

Can we use any other like micro servo instead of potentiometer??

[@RMW360]

Do you mean micro servo ?

[@RMW360]

You can use servo motor instead of potentiometer . you can get servo read by using servo.read() For information visit this page www.arduino.cc/en/Reference/ServoRead

[@latevlogs]

Great tutorial it really worked. Really well explained. But tell me, to use it in any game, for example ets2, i need to conect it as a joystick and not a gaming wheel?

[@RMW360]

Happy to hear, YOU have made this. It is always recognised as joystick.

[@NOVA-7-7-7]

Bro I have Arduino Uno 238 p it was working please tell the answer

[@RMW360]

Your question is not clear to me.

[@milosgagic4820]

Hi! I made it work, but i want to add pedals to the setup. I will use 2 slider potentiometers. Is their value important?

[@RMW360]

If you want to control acceleration speed...

[@namitananda1652]

Can you tell any other games which support unojoy

[@virenvadodariya1813]

Accelater or break does not work in euro truck simulator 2. Plz give any solution.

[@RMW360]

Unojoy emulates joystick buttons. So, check out control settings on euro track simulator and assign accelerate and break button.

[@virenvadodariya1813]

Ok thnx.

[@dorjderemnamsraijav5182]

Doesnt it have deadzone? I have seen many people having a headache becaude of deadzone of the potentiometer?

[@RMW360]

You can use encoder

[@renuagrawal1945]

Can I use this steering wheel with hc05 bluetooth module also. Pls reply

[@renuagrawal1945]

Pls reply

[@abhisheksrivastav5658]

How can I use 6 pin potentiometer ?? and is there any difference between 3 and 6 one ??

[@RMW360]

Sry ! Don't know about 6 pin pot.

[@gokulg264]

6 pin pot have dual pot u can use it but u need to find which is 1 pot and 2 pot

[@keshavkamediya]

Now flip line interpreter showing Fail. Could not open USB device plz help me

[@RMW360]

connect rst & gnd pin first

[@mishalnice540]

Can this be made with Arduino nano, any changes required in code

[@RMW360]

Sorry, this firmware only works on uno and mega

[@jay_pz4770]

Whether new Arduino Uno should also be reseted ? Before uploading data ?

[@RMW360]

Not before uploading data but before changing firmware.

[@RMW360]

And every time when you want to upload new sketch you have to go back serial communication mode by using TurnIntoArduino.bat

[@jay_pz4770]

@@RMW360 I have buyed a new Arduino Uno can I directly upload data directly without connecting reset pin

[@eiurandelfkhan2299]

Instead of potentiometer can i use recorder?

[@smilerdrpriyapriydarshni6583]

Hey what is the value of your potentiometer? Or it rotating with full 360 or just half?

[@RMW360]

10k ohm. 360 1turn

[@marselinushindarto6498]

Can the pedals makes from the potensio slide?

[@RMW360]

Yes but that may not work smoothly.

[@nishasanil6626]

Can you give me a digram or tips for making h-shifter,extra 2buttons please

[@digitalexcellent8078]

Nice project guys, can i add two button for shift gear position up or down, and how to do it?

[@RMW360]

You can add more buttons actually its already programmed , search for unojoy button map and manage control settings from game .

[@siddhantchaudhary4946]

In game when setting controls steering only show left side even though I turned the potentiometer right

[@kennethkindrich3114]

Might have the potentiometer upsidown

[@guillermosoto1498]

Hi, do you know if is possible to use the acelerometer Mpu-6050 as controller for driving wheel?

[@RMW360]

Yeah, I tried with Arduino pro micro .works smoothly

[@guillermosoto1498]

@@RMW360 Nice, thank you :)

[@siddhantchaudhary4946]

How do I set the controls.... The controls for the steering wheel... Is not working properly.... It only shows turn left

[@IronicDeGawd]

Bro , I made it and it worked like magic I need your help .My hard drive has actually crashed. I wanted to turn my UnoJoy into Arduino back so I could use it with help of my smartphone . When I connect it to smartphone it detects it as gaming joystick. Please help?!!!

[@RMW360]

Go back into dfu mode then run TurnIntoArduino.bat file. [You can not go back to arduino normal mode using smartphone ]

[@SahilSingh-xv2im]

Is this controller work with NFS mw2 only . how to connect with other racing games ?? can u plzz explain me

[@jay_pz4770]

Can we use limit switch for accelerate and brake

[@RMW360]

Umm, you can use potentiometer for accelerate and breke

[@abhishekkulapkar8048]

I want to make steering wheel and brakes for WTDS (world truck driving simulator) (mobile game) will it work?

[@rudraneelmandal4741]

I don't think so

[@thekassaiba6694]

Video is good but the problem is the peadls not hav propotional, just a button thingi.

[@RMW360]

In that time, We didn’t have 3D printer 😅😅

[@thisunsasmitha6925]

Can i use arduino nano insted of uno

[@RMW360]

No

[@intothenaturewithnafis7732]

When I connect my arduino in pc....it shows uno joystick...how to convert it into arduino uno device?

[@gokulg264]

Can I use potentiometer instead of button switch for acceleration and break

[@RealRenko]

yeah

[@ayushrajburnwal601]

the gaming controller fails to turn left or right when I used it with NFS Most Wanted game . It takes only one input either right or left how to handle this issue with the controls of the game. The accelerate button and brake button are working fine but the potentiometer output is not read properly . It sometimes recognises it as brake too.. Plz help me out

[@girishchandra6722]

Hey bro i bought Arduino lenaordo so how can i make with this

[@RMW360]

Yep, it will be easier for you. May be this video wont be helpful for you :/

[@rudraneelmandal4741]

There are other tutorials for Leonardo

[@jay_pz4770]

Bro how to use encoder instead of potentiometer ..... Please help...

[@Yrsubu]

what is the name of the part used for acceleration

[@rudraneelmandal4741]

Button

[@amarnagi7117]

hi guys good work but u did not show how to configure with GTA V game in setting, Kindly tell about it.

[@hanoroam2259]

Bro the video is awesome. i tried many times to do it. but couldnt make it like a joystick. lot of trouble shooting. including de bug mode. it doesnt show as other devices.. I was doing it for college tech fest.😞

[@RMW360]

I guess your are using smd version of arduino. you should try through hole version of arduino which has atmega16u2 as serial communation chip thank you-walid

[@hanoroam2259]

how to configure settings in game?

[@charan23reddy23]

Hi so I like your video but I need to know how to adjust the potentiometer to 550 degree like you did

[@androgamers8020]

Can we play euro truck simulator 2 with this wheel

[@RMW360]

Yes.

[@kaktus9026]

Any game whitch supports steering wheel

[@ANKITSINGH-vb9hn]

Bro ,can i do this by using atmel32U4 ..plzzz reply

[@RMW360]

follow this : www.instructables.com/id/Arduino-LeonardoMicroATMega32u4-As-GamepadGame-Con/

[@ANKITSINGH-vb9hn]

Thanku sir

[@RMW360]

@@ANKITSINGH-vb9hn Everything right in place , check again drive.google.com/drive/folders/18wAJTDvixndr6rdGIJImLXgPg1Ai6LH7

[@ANKITSINGH-vb9hn]

Thanks again bro

[@ANKITSINGH-vb9hn]

Bro is there any way to detect arduino as a screen....like in this video it is detected as a game controller..please reply

[@DedSecGamer0]

Can you give me the link from where yu buy potentiometer

[@fontanot]

Can this be used for analog plunger for a virtual pinball machine?

[@ugvey6494]

Yes

[@abdulmuiz6875]

Kia Ham ko potentiometer mid me adjust karna hay ya kahaan par

[@RMW360]

Open game controller from control panel then try to adjust potentiometer

[@DedSecGamer0]

We can use any potentiometer 10k

[@RMW360]

DEDSEC HACKER yes , we can use any potentiometer but larger value of resistance will be better.

[@DedSecGamer0]

potentiometer of 10k

[@Alex-jd9oz]

Hey, I am currently having a problem with installing the driver, my computer is recognizing the device (by this I mean my computer will refer to the Arduino as "USB Serial Device (COM3)") even if I touch the reset and ground together. Plus when I try to install the driver the computer wont let it install and says the error is "The third-party INF does not contain digital signature information" . Any suggestions?

[@RMW360]

Possible reason can be arduino did not enter into dfu mode

[@hermanneffendi8461]

Can u pls test and tell me that can it be used with Xbox 360 pls

[@RMW360]

I do not have xbox but unojoy works with xbox

[@gujjug5219]

Can i use this steering wheel in euro truck simulator 2 ?? Plz reply me

[@axomox3220]

Can I apply this for making a throttle for a flight simulator?

[@RMW360]

Yeah, you can use 6 analog pins for using potentiometer to make throttle .

[@axomox3220]

@@RMW360 thanx you

[@nixonlubaba2673]

I’m stuck 🤦🏽. Turnintoajoystick.bat isn’t opening on Mac, can’t find an application to open it.

[@nixonlubaba2673]

Maybe I should get a windows computer

[@RMW360]

@@nixonlubaba2673 Ha Ha . you do not need to buy windows computer for this little things . Here is the solution

[@RMW360]

@@nixonlubaba2673 open a text editor then paste this and save as "turnintojoystick.command" #!/bin/sh cd "`dirname "$0"`" echo # New Line echo 'Abracadabra! ' echo # New Line cd ATmega8u2Code/HexFiles if test -e ./dfu-programmer; then echo "Trying to program for Arduino Uno R1/R2..." ./dfu-programmer at90usb82 flash UnoJoy.hex if test $? != 0; then echo "We didn't find the R1/R2 model, checking for an R3..." ./dfu-programmer atmega16u2 flash UnoJoy.hex if test $? != 0; then echo # New line echo "dfu-programmer couldn't connect to the Arduino..." echo "Did you put the Arduino into DFU mode?" echo "Did you install the libusb driver?" else echo # New Line echo "Unplug your Arduino and plug it back in. It's a joystick now!" fi else echo # New Line echo "Unplug your Arduino and plug it back in. It's a joystick now!" fi else echo "Couldn't find dfu-programmer..." echo "Did you move this script or do anything to the ATmeg8u2Code directory?" fi

[@abdulmuiz6875]

Can you tell me which one is the reset and gnd pin to connect

[@RMW360]

First 2pin , Top-right corner of Arduino. Watch video from 4:43min

[@Supercanary77]

For me it says that the driver may not be compatible with my version of PC and it could stop working. Is there any updated version of the driver? Thanks for the reply in advance! --> I got it to work using some common sense. But I have another question. In the testing tab it doesen't only move on X axis, instead it goes diagonal?! Why?

[@RMW360]

It should not go diagonally I took just "LeftStick" X axis

[@Supercanary77]

RMW 360 [ Walid Mafuj ] I have an Arduino mega and I actualy used the tutorial provided in the unojoy folder. But if I use the arduino uno command for turning it in to a joystick, the + sign in the joystick menu just goes from top left to bottom right. I dont realy know what to do here...

[@ayushdubey4672]

I am trying to update driver in windows 10 but unfortunately it is showing "THE THIRD PARTY INF DOESN'T CONTAIN ANY DIGITAL SIGNATURE INFORMATION"

[@abdulmuiz6875]

Can we attach gyroscope sensor to it? That works like joystick 🕹️ trigger? Must reply

[@RMW360]

You can

[@abdulmuiz6875]

How

[@RMW360]

Specifically what do you want to do with gyro ? do you want to use gyro instead of potentiometer .?

[@abdulmuiz6875]

No I don't. I want to just play GTA 5 in gyroscope

[@bilal12e]

MASHALLAH vey good brothers

[@RMW360]

Zazal Allahu khairan

[@mukshdhiman]

BRO, YOU DID A GOOD JOB, I HAVE A PROBLEM MY ARDUINO UNO R3 DOESN'T GET DFU MODE AFTER SHORTING, IT REMAINS THE SAME IN ARDUINO MODE, my chip IS A 16U2 and my ic is atmega328p, and I have this problem too "atlibusbdfu.dll not found" Even when I open Flip it shows the same error, PLEASE HELP ME, REQUEST!

[@nixonlubaba2673]

Please help. My buttons have 4 pins, how/where would I connect them? Thank you 🙏

[@nixonlubaba2673]

Please please if you can help

[@rftech9882]

i don’t think that would work☹️ You can use a push button like this : Generic OV17136 On-Off Momentary Push Button Horn Switch Red, Pack of 5 www.amazon.in/dp/B06VXFRB28/ref=cm_sw_r_cp_api_fabc_44d4Fb2SPFKTM

[@sagitta98]

What if I want to use a real car steering wheels instead using cardboard. Can that tiny Potentiometer handle it?

[@RMW360]

Then you can use potentiometer with gear

[@sagitta98]

Thanks for your suggestion

[@husfh_850]

Why if i do everythings, then the software (American Truck Simulator) put my mouse in left and i don't do nothing?

[@aachalsharma8305]

Bro tell me one thing..can I use Arduino nano instead of uno?

[@RMW360]

Sorry to say , unojoy does not support arduino nano. But there is still a way . You can use V-USB library (virtual USB)

[@rachnasoni7903]

Which game you are playing can you please tell me

[@RMW360]

Need for speed most wanted 2

[@abdulmuiz6875]

Kia Ham padels me switch ki bjae potentiometer laga saktay Hain agar haan to kaisay please reply

[@RMW360]

To do that , we have change the coding .

[@abdulmuiz6875]

Code phir aap dain dain please

[@abdulmuiz6875]

Ya video bana dain

[@NOVA-7-7-7]

Which type of potentialmeter

[@RMW360]

Regular 10K potentiometer . you can use any value above 10k